| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* maint:
Add reference for status letters in documentation.
Document that git-log takes --all-match.
Update draft 1.6.0.4 release notes
|
|
Also fix error in diff_filepair::status documentation, and point to
the in-code reference as well as the doc.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "diff" gitattribute is somewhat overloaded right now. It
can say one of three things:
1. this file is definitely binary, or definitely not
(i.e., diff or !diff)
2. this file should use an external diff engine (i.e.,
diff=foo, diff.foo.command = custom-script)
3. this file should use particular funcname patterns
(i.e., diff=foo, diff.foo.(x?)funcname = some-regex)
Most of the time, there is no conflict between these uses,
since using one implies that the other is irrelevant (e.g.,
an external diff engine will decide for itself whether the
file is binary).
However, there is at least one conflicting situation: there
is no way to say "use the regular rules to determine whether
this file is binary, but if we do diff it textually, use
this funcname pattern." That is, currently setting diff=foo
indicates that the file is definitely text.
This patch introduces a "binary" config option for a diff
driver, so that one can explicitly set diff.foo.binary. We
default this value to "don't know". That is, setting a diff
attribute to "foo" and using "diff.foo.funcname" will have
no effect on the binaryness of a file. To get the current
behavior, one can set diff.foo.binary to true.
This patch also has one additional advantage: it cleans up
the interface to the userdiff code a bit. Before, calling
code had to know more about whether attributes were false,
true, or unset to determine binaryness. Now that binaryness
is a property of a driver, we can represent these situations
just by passing back a driver struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This concept was retired by 77882f6 (Retire diffcore-pathspec.,
2006-04-10), more than 2 years ago.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core rename detection had some rather stupid code to check if a
pathname was used by a later modification or rename, which basically
walked the whole pathname space for all renames for each rename, in
order to tell whether it was a pure rename (no remaining users) or
should be considered a copy (other users of the source file remaining).
That's really silly, since we can just keep a count of users around, and
replace all those complex and expensive loops with just testing that
simple counter (but this all depends on the previous commit that shared
the diff_filespec data structure by using a separate reference count).
Note that the reference count is not the same as the rename count: they
behave otherwise rather similarly, but the reference count is tied to
the allocation (and decremented at de-allocation, so that when it turns
zero we can get rid of the memory), while the rename count is tied to
the renames and is decremented when we find a rename (so that when it
turns zero we know that it was a rename, not a copy).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than copy the filespecs when introducing new versions of them
(for rename or copy detection), use a refcount and increment the count
when reusing the diff_filespec.
This avoids unnecessary allocations, but the real reason behind this is
a future enhancement: we will want to track shared data across the
copy/rename detection. In order to efficiently notice when a filespec
is used by a rename, the rename machinery wants to keep track of a
rename usage count which is shared across all different users of the
filespec.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We find rename candidates by computing a fingerprint hash of
each file, and then comparing those fingerprints. There are
inherently O(n^2) comparisons, so it pays in CPU time to
hoist the (rather expensive) computation of the fingerprint
out of that loop (or to cache it once we have computed it once).
Previously, we didn't keep the filespec information around
because then we had the potential to consume a great deal of
memory. However, instead of keeping all of the filespec
data, we can instead just keep the fingerprint.
This patch implements and uses diff_free_filespec_data_large
to accomplish that goal. We also have to change
estimate_similarity not to needlessly repopulate the
filespec data when we already have the hash.
Practical tests showed 4.5x speedup for a 10% memory usage
increase.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This updates the hunk header customization syntax. The special
case 'funcname' attribute is gone.
You assign the name of the type of contents to path's "diff"
attribute as a string value in .gitattributes like this:
*.java diff=java
*.perl diff=perl
*.doc diff=doc
If you supply "diff.<name>.funcname" variable via the
configuration mechanism (e.g. in $HOME/.gitconfig), the value is
used as the regexp set to find the line to use for the hunk
header (the variable is called "funcname" because such a line
typically is the one that has the name of the function in
programming language source text).
If there is no such configuration, built-in default is used, if
any. Currently there are two default patterns: default and java.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes"diff -p" hunk headers customizable via gitattributes mechanism.
It is based on Johannes's earlier patch that allowed to define a single
regexp to be used for everything.
The mechanism to arrive at the regexp that is used to define hunk header
is the same as other use of gitattributes. You assign an attribute, funcname
(because "diff -p" typically uses the name of the function the patch is about
as the hunk header), a simple string value. This can be one of the names of
built-in pattern (currently, "java" is defined) or a custom pattern name, to
be looked up from the configuration file.
(in .gitattributes)
*.java funcname=java
*.perl funcname=perl
(in .git/config)
[funcname]
java = ... # ugly and complicated regexp to override the built-in one.
perl = ... # another ugly and complicated regexp to define a new one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces an explicit initialization of filespec->is_binary
field used for rename/break followed by direct access to that
field with a wrapper function that lazily iniaitlizes and
accesses the field. We would add more attribute accesses for
the use of diff routines, and it would be better to make this
abstraction earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diffcore-break and diffcore-rename would want to behave slightly
differently depending on the binary-ness of the data, so add one
bit to the filespec, as the structure is now passed down to
diffcore_count_changes() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We may want to use richer information on the data we are dealing
with in this function, so instead of passing a buffer address
and length, just pass the diffcore_filespec structure. Existing
callers always call this function with parameters taken from a
filespec anyway, so there is no functionality changes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the way diffcore represents an unmerged pair
somewhat. It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag. This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.
This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The final output from diff used to compare pathnames between
preimage and postimage to tell if the filepair is a rename/copy.
By explicitly marking the filepair created by diffcore_rename(),
the output routine, resolve_rename_copy(), does not have to do
so anymore. This helps feeding a filepair that has different
pathnames in one and two elements to the diff machinery (most
notably, comparing two blobs).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes diffcore-rename to reuse statistics information
gathered during similarity estimation, and updates the hashtable
implementation used to keep track of the statistics to be
denser. This seems to give better performance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a companion patch to the previous fix to diffcore-rename.
The merging-back process should use a logic similar to what is used
there.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is to rework diffcore break/rename/copy detection code
so that it does not affected when deltifier code gets improved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While reviewing the end user tutorial rewrite by J. Bruce
Fields, I noticed that "git-diff-tree -B -C" did not correctly
break the total rewrite of Documentation/tutorial.txt. It turns
out that we had integer overflow during the break score
computations.
Cop out by using floating point. This is not a kernel.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When many paths are modified, rename detection takes a lot of time.
The new option -l<num> can be used to disable rename detection when
more than <num> paths are possibly created as renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This reverts 068eac91ce04b9aca163acb1927c3878c45d1a07 commit.
|
|
When I run git-diff-tree on big change, it seems the command eats so
much memory. so I just put git under valgrind to see what's going on.
diff_free_filespec_data() doesn't free diff_filespec itself.
[jc: I ended up doing things slightly differently from Yasushi's
patch. The original idea was to use free_filespec_data() only to
free the data portion and keep useing the filespec itself, but
no existing code seems to do things that way, so I just yanked
that part out.]
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When an unmerged path was fed via diff_unmerged() into diffcore,
it eventually called run_diff() with "one" and "two" parameters
with NULL, but run_diff() was not written carefully enough to
notice this situation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
NULL is not considered a VALID pathspec.
|
|
This fixes three bugs in the -B heuristics.
- Although it was advertised that the initial break criteria
used was the same as what diffcore-rename uses, it was using
something different. Instead of using smaller of src and dst
size to compare with "edit" size, (insertion and deletion),
it was using larger of src and dst, unlike the rename/copy
detection logic. This caused the parameter to -B to mean
something different from the one to -M and -C. To compensate
for this change, the default break score is also changed to
match that of the default for rename/copy.
- The code would have crashed with division by zero when trying
to break an originally empty file.
- Contrary to what the comment said, the algorithm was breaking
small files, only to later merge them together.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch updates diff documentation and usage strings:
- clarify the semantics of -R. It is not "output in reverse";
rather, it is "I will feed diff backwards". Semantically
they are different when -C is involved.
- describe -O in usage strings of diff-* brothers. It was
implemented, documented but not described in usage text.
Also it adds -O to diff-helper. Like -S (and unlike -M/-C/-B),
this option can work on sanitized diff-raw output produced by
the diff-* brothers. While we are at it, the call it makes to
diffcore is cleaned up to use the diffcore_std() like everybody
else, and the declaration for the low level diffcore routines
are moved from diff.h (public) to diffcore.h (private between
diff.c and diffcore backends).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make it return copied source and insertion separately, so that
later implementation of heuristics can use them more flexibly.
This does not change the heuristics implemented in
diffcore-rename nor diffcore-break in any way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The core GIT repository has trees that record regular file mode
in 0664 instead of normalized 0644 pattern. Comparing such a
tree with another tree that records the same file in 0644
pattern without content changes with git-diff-tree causes it to
feed otherwise unmodified pairs to the diff_change() routine,
which triggers a sanity check routine and barfs. This patch
fixes the problem, along with the fix to another caller that
uses unnormalized mode bits to call diff_change() routine in a
similar way.
Without this patch, you will see "fatal error" from diff-tree
when you run git-deltafy-script on the core GIT repository
itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
A new macro, DIFF_PAIR_RENAME(), is introduced to distinguish a
filepair that is a rename/copy (the definition of which is src
and dst are different paths, of course). This removes the hack
used in the record_rename_pair() to always put a non-zero value
in the score field.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This attempts to optimize "diff-tree -[CM] --stdin", which
compares successible tree pairs. This optimization does not
make much sense for other commands in the diff-* brothers.
When reading from --stdin and using rename/copy detection, the
patch makes diff-tree to read the current index file first.
This is done to reuse the optimization used by diff-cache in the
non-cached case. Similarity estimator can avoid expanding a
blob if the index says what is in the work tree has an exact
copy of that blob already expanded.
Another optimization the patch makes is to check only file sizes
first to terminate similarity estimation early. In order for
this to work, it needs a way to tell the size of the blob
without expanding it. Since an obvious way of doing it, which
is to keep all the blobs previously used in the memory, is too
costly, it does so by keeping the filesize for each object it
has already seen in memory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Earier version of diffcore-rename used to keep unmodified
filepair in its output so that the last stage of the processing
that tells renames from copies can make all of rename/copy to
copies. However this had a bad interaction with other diffcore
filters that wanted to run after diffcore-rename, in that such
unmodified filepair must be retained for proper distinction
between renames and copies to happen.
This patch fixes the problem by changing the way diffcore-rename
records the information needed to distinguish "all are copies"
case and "the last one is a rename" case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Earlier rename/copy detection left unmodified filepair in the
output and forced downstream to keep them even when they are
filtering, and the diff_needs_to_stay() function was used for
the logic. It is not used anymore, so remove it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This introduces a new function to free a common data structure,
and plugs some leaks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
With the introduction of type 'T' in the diff-raw output, and
the "apply-patch" program Linus has been quietly working on
without much advertisement, it started to make sense to emit
usable information in the "diff --git" patch output format as
well. Earlier built-in diff driver punted and did not say
anything about a symbolic link changing into a file or vice
versa, but this version represents it as a pair of deletion
and creation.
It also fixes a minor problem dealing with old archive created
with ancient git. The earlier code was reporting file mode
change between 100664 and 100644 (we shouldn't). The linux-2.6
git tree has a good example that exposes this problem. A good
test case is commit ce1dc02f76432a46db149241e015a4f782974623.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The interim single-liner '?' fix resulted delete entries that
should not have emitted coming out in the output as an
unintended side effect; I caught this with the "rename" test in
the test suite. This patch instead fixes the code that assigns
the status code to each filepair.
I verified this does not break the testcase in udev.git tree Kay
Sievers gave us, by running git-diff-tree on that tree which
showed 21 file to symlink changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Earlier implementation had a major screw-up in the memory
management area. Rename/copy logic sometimes borrowed a pointer
to a structure without any provision for downstream to determine
which pointer is shared and which is not. This resulted in the
later clean-up code to sometimes double free such structure,
resulting in a segfault. This made -M and -C useless.
Another problem the earlier implementation had was that it
reordered the patches, and forced the logic to differentiate
renames and copies to depend on that particular order. This
problem was fixed by teaching rename/copy detection logic not to
do any reordering, and rename-copy differentiator not to depend
on the order of the patches. The diffs will leave rename/copy
detector in the same destination path order as the patch that
was fed into it. Some test vectors have been reordered to
accommodate this change.
It also adds a sanity check logic to the human-readable diff-raw
output to detect paths with embedded TAB and LF characters,
which cannot be expressed with that format. This idea came up
during a discussion with Chris Wedgwood.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
For later stages to reorder patches, pruning logic and rename detection
logic should not decide which delete to discard (because another entry
said it will take over the file as a rename) until the very end.
Also fix some tests that were assuming the earlier "last one is rename
or keep everything else is copy" semantics of diff-raw format, which no
longer is true.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This changes the diff-raw format again, following the mailing
list discussion. The new format explicitly expresses which one
is a rename and which one is a copy.
The documentation and tests are updated to match this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The rename/copy detection logic in earlier round was only good
enough to show patch output and discussion on the mailing list
about the diff-raw format updates revealed many problems with
it. This patch fixes all the ones known to me, without making
things I want to do later impossible, mostly related to patch
reordering.
(1) Earlier rename/copy detector determined which one is rename
and which one is copy too early, which made it impossible
to later introduce diffcore transformers to reorder
patches. This patch fixes it by moving that logic to the
very end of the processing.
(2) Earlier output routine diff_flush() was pruning all the
"no-change" entries indiscriminatingly. This was done due
to my false assumption that one of the requirements in the
diff-raw output was not to show such an entry (which
resulted in my incorrect comment about "diff-helper never
being able to be equivalent to built-in diff driver"). My
special thanks go to Linus for correcting me about this.
When we produce diff-raw output, for the downstream to be
able to tell renames from copies, sometimes it _is_
necessary to output "no-change" entries, and this patch
adds diffcore_prune() function for doing it.
(3) Earlier diff_filepair structure was trying to be not too
specific about rename/copy operations, but the purpose of
the structure was to record one or two paths, which _was_
indeed about rename/copy. This patch discards xfrm_msg
field which was trying to be generic for this wrong reason,
and introduces a couple of fields (rename_score and
rename_rank) that are explicitly specific to rename/copy
logic. One thing to note is that the information in a
single diff_filepair structure _still_ does not distinguish
renames from copies, and it is deliberately so. This is to
allow patches to be reordered in later stages.
(4) This patch also adds some tests about diff-raw format
output and makes sure that necessary "no-change" entries
appear on the output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This moves the path selection logic from individual programs to a new
diffcore transformer (diff-tree still needs to have its own for
performance reasons). Also the header printing code in diff-tree was
tweaked not to produce anything when pickaxe is in effect and there is
nothing interesting to report. An interesting example is the following
in the GIT archive itself:
$ git-whatchanged -p -C -S'or something in a real script'
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This does not actually supress the extra headers when pickaxe is
used, but prepares enough support for diff-tree to implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This steals the "pickaxe" feature from JIT and make it available
to the bare Plumbing layer. From the command line, the user
gives a string he is intersted in.
Using the diff-core infrastructure previously introduced, it
filters the differences to limit the output only to the diffs
between <src> and <dst> where the string appears only in one but
not in the other. For example:
$ ./git-rev-list HEAD | ./git-diff-tree -Sdiff-tree-helper --stdin -M
would show the diffs that touch the string "diff-tree-helper".
In real software-archaeologist application, you would typically
look for a few to several lines of code and see where that code
came from.
The "pickaxe" module runs after "rename/copy detection" module,
so it even crosses the file rename boundary, as the above
example demonstrates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
Junio C Hamano
Yann Dirson
Jeff King
Linus Torvalds
Junio C Hamano
Yasushi SHOJI
Linus Torvalds