summaryrefslogtreecommitdiff
path: root/diffcore-pickaxe.c
AgeCommit message (Collapse)AuthorFilesLines
2018-09-21userdiff.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-2/+2
[jc: squashed in missing forward decl in userdiff.h found by Ramsay] Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21diff.c: remove the_index dependency in textconv() functionsLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-21regex: do not call `regfree()` if compilation failsLibravatar Martin Ågren1-1/+0
It is apparently undefined behavior to call `regfree()` on a regex where `regcomp()` failed. The language in [1] is a bit muddy, at least to me, but the clearest hint is this (`preg` is the `regex_t *`): Upon successful completion, the regcomp() function shall return 0. Otherwise, it shall return an integer value indicating an error as described in <regex.h>, and the content of preg is undefined. Funnily enough, there is also the `regerror()` function which should be given a pointer to such a "failed" `regex_t` -- the content of which would supposedly be undefined -- and which may investigate it to come up with a detailed error message. In any case, the example in that document shows how `regfree()` is not called after `regcomp()` fails. We have quite a few users of this API and most get this right. These three users do not. Several implementations can handle this just fine [2] and these code paths supposedly have not wreaked havoc or we'd have heard about it. (These are all in code paths where git got bad input and is just about to die anyway.) But let's just avoid the issue altogether. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/regcomp.html [2] https://www.redhat.com/archives/libvir-list/2013-September/msg00262.html Researched-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-byi Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diff: properly error out when combining multiple pickaxe optionsLibravatar Stefan Beller1-1/+0
In f506b8e8b5 (git log/diff: add -G<regexp> that greps in the patch text, 2010-08-23) we were hesitant to check if the user requests both -S and -G at the same time. Now that the pickaxe family also offers --find-object, which looks slightly more different than the former two, let's add a check that those are not used at the same time. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diffcore: add a pickaxe option to find a specific blobLibravatar Stefan Beller1-18/+27
Sometimes users are given a hash of an object and they want to identify it further (ex.: Use verify-pack to find the largest blobs, but what are these? or [1]) One might be tempted to extend git-describe to also work with blobs, such that `git describe <blob-id>` gives a description as '<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer number of responses (>110), it turns out this is tricky to get right. The hard part to get right is picking the correct 'commit-ish' as that could be the commit that (re-)introduced the blob or the blob that removed the blob; the blob could exist in different branches. Junio hinted at a different approach of solving this problem, which this patch implements. Teach the diff machinery another flag for restricting the information to what is shown. For example: $ ./git log --oneline --find-object=v2.0.0:Makefile b2feb64309 Revert the whole "ask curl-config" topic for now 47fbfded53 i18n: only extract comments marked with "TRANSLATORS:" we observe that the Makefile as shipped with 2.0 was appeared in v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The reason why these commits both occur prior to v2.0.0 are evil merges that are not found using this new mechanism. [1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob [2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/ Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bitLibravatar Stefan Beller1-3/+3
Currently flags for pickaxing are found in different places. Unify the flags into the `pickaxe_opts` field, which will contain any pickaxe related flags. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: make struct diff_flags members lowercaseLibravatar Brandon Williams1-4/+4
Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_TST macroLibravatar Brandon Williams1-4/+4
Remove the `DIFF_OPT_TST` macro and instead access the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_TST(&E, fld) + E.flags.fld @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_TST(ptr, fld) + ptr->flags.fld Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-24Merge branch 'js/regexec-buf'Libravatar Junio C Hamano1-2/+5
Fix for potential segv introduced in v2.11.0 and later (also v2.10.2). * js/regexec-buf: pickaxe: fix segfault with '-S<...> --pickaxe-regex'
2017-03-18pickaxe: fix segfault with '-S<...> --pickaxe-regex'Libravatar SZEDER Gábor1-2/+5
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result of out-of-bounds memory reads. diffcore-pickaxe.c:contains() looks for all matches of the given regex in a buffer in a loop, advancing the buffer pointer to the end of the last match in each iteration. When we switched to REG_STARTEND in b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing the size of that buffer to the regexp engine, too. Unfortunately, this buffer size is never updated on subsequent iterations, and as the buffer pointer advances on each iteration, this "bufptr+bufsize" points past the end of the buffer. This results in segmentation fault, if that memory can't be accessed. In case of 'git log' it can also result in erroneously listed commits, if the memory past the end of buffer is accessible and happens to contain data matching the regex. Reduce the buffer size on each iteration as the buffer pointer is advanced, thus maintaining the correct end of buffer location. Furthermore, make sure that the buffer pointer is not dereferenced in the control flow statements when we already reached the end of the buffer. The new test is flaky, I've never seen it fail on my Linux box even without the fix, but this is expected according to db5dfa3 (regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails, 2016-09-21). However, it did fail on Travis CI with the first (and incomplete) version of the fix, and based on that commit message I would expect the new test without the fix to fail most of the time on Windows. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26Merge branch 'js/regexec-buf'Libravatar Junio C Hamano1-10/+8
Some codepaths in "git diff" used regexec(3) on a buffer that was mmap(2)ed, which may not have a terminating NUL, leading to a read beyond the end of the mapped region. This was fixed by introducing a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND extension. * js/regexec-buf: regex: use regexec_buf() regex: add regexec_buf() that can work on a non NUL-terminated string regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
2016-09-21regex: use regexec_buf()Libravatar Johannes Schindelin1-10/+8
The new regexec_buf() function operates on buffers with an explicitly specified length, rather than NUL-terminated strings. We need to use this function whenever the buffer we want to pass to regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated). Note: the original motivation for this patch was to fix a bug where `git diff -G <regex>` would crash. This patch converts more callers, though, some of which allocated to construct NUL-terminated strings, or worse, modified buffers to temporarily insert NULs while calling regexec(3). By converting them to use regexec_buf(), the code has become much cleaner. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01diffcore-pickaxe: support case insensitive match on non-asciiLibravatar Nguyễn Thái Ngọc Duy1-0/+11
Similar to the "grep -F -i" case, we can't use kws on icase search outside ascii range, so we quote the string and pass it to regcomp as a basic regexp and let regex engine deal with case sensitivity. The new test is put in t7812 instead of t4209-log-pickaxe because lib-gettext.sh might cause problems elsewhere, probably. Noticed-by: Plamen Totev <plamen.totev@abv.bg> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01diffcore-pickaxe: Add regcomp_or_die()Libravatar Nguyễn Thái Ngọc Duy1-9/+13
There's another regcomp code block coming in this function that needs the same error handling. This function can help avoid duplicating error handling code. Helped-by: Jeff King <peff@peff.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28react to errors in xdi_diffLibravatar Jeff King1-2/+2
When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24pickaxe: simplify kwset loop in contains()Libravatar René Scharfe1-5/+2
Inlining the variable "found" actually makes the code shorter and easier to read. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24pickaxe: call strlen only when necessary in diffcore_pickaxe_count()Libravatar René Scharfe1-2/+1
We need to determine the search term's length only when fixed-string matching is used; regular expression compilation takes a NUL-terminated string directly. Only call strlen() in the former case. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24pickaxe: move pickaxe() after pickaxe_match()Libravatar René Scharfe1-41/+38
pickaxe() calls pickaxe_match(); moving the definition of the former after the latter allows us to do without an explicit function declaration. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24pickaxe: merge diffcore_pickaxe_grep() and diffcore_pickaxe_count() into ↵Libravatar René Scharfe1-37/+7
diffcore_pickaxe() diffcore_pickaxe_count() initializes the regular expression or kwset for the search term, calls pickaxe() with the callback has_changes() and cleans up afterwards. diffcore_pickaxe_grep() does the same, only it doesn't support kwset and uses the callback diff_grep() instead. Merge the two functions to form the new diffcore_pickaxe() and thus get rid of the duplicate regex setup and cleanup code. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24pickaxe: honor -i when used with -S and --pickaxe-regexLibravatar René Scharfe1-1/+4
accccde4 (pickaxe: allow -i to search in patch case-insensitively) allowed case-insenitive matching for -G and -S, but for the latter only if fixed string matching is used. Allow it for -S and regular expression matching as well to make the support complete. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12Merge branch 'rs/pickaxe-simplify'Libravatar Junio C Hamano1-7/+4
* rs/pickaxe-simplify: diffcore-pickaxe: simplify has_changes and contains
2013-07-07diffcore-pickaxe: simplify has_changes and containsLibravatar René Scharfe1-7/+4
Halve the number of callsites of contains() to two using temporary variables, simplifying the code. While at it, get rid of the diff_options parameter, which became unused with 8fa4b09f. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-03diffcore-pickaxe: make error messages more consistentLibravatar Ramkumar Ramachandra1-2/+2
Currently, diffcore-pickaxe reports two distinct errors for the same user error: $ git log --pickaxe-regex -S'\1' fatal: invalid pickaxe regex: Invalid back reference $ git log -G'\1' fatal: invalid log-grep regex: Invalid back reference This "log-grep" was only an internal name for the -G feature during development, and invite confusion with "git log --grep=<pattern>". Change the error messages to say "invalid regex". Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-05diffcore-pickaxe: unify code for log -S/-GLibravatar Jeff King1-69/+49
The logic flow of has_changes() used for "log -S" and diff_grep() used for "log -G" are essentially the same. See if we have both sides that could be different in any interesting way, slurp the contents in core, possibly after applying textconv, inspect the contents, clean-up and report the result. The only difference between the two is how "inspect" step works. Unify this codeflow in a helper, pickaxe_match(), which takes a callback function that implements the specific "inspect" step. After removing the common scaffolding code from the existing has_changes() and diff_grep(), they each becomes such a callback function suitable for passing to pickaxe_match(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-05diffcore-pickaxe: fix leaks in "log -S<block>" and "log -G<pattern>"Libravatar Junio C Hamano1-5/+7
The diff_grep() and has_changes() functions had early return codepaths for unmerged filepairs, which simply returned 0. When we taught textconv filter to them, one was ignored and continued to return early without freeing the result filtered by textconv, and the other had a failed attempt to fix, which allowed the planned return value 0 to be overwritten by a bogus call to contains(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-05diffcore-pickaxe: port optimization from has_changes() to diff_grep()Libravatar Junio C Hamano1-1/+6
These two functions are called in the same codeflow to implement "log -S<block>" and "log -G<pattern>", respectively, but the latter lacked two obvious optimizations the former implemented, namely: - When a pickaxe limit is not given at all, they should return without wasting any cycle; - When both sides of the filepair are the same, and the same textconv conversion apply to them, return early, as there will be no interesting differences between the two anyway. Also release the filespec data once the processing is done (this is not about leaking memory--it is about releasing data we finished looking at as early as possible). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-05diffcore-pickaxe: respect --no-textconvLibravatar Simon Ruderich1-4/+8
git log -S doesn't respect --no-textconv: $ echo '*.txt diff=wrong' > .gitattributes $ git -c diff.wrong.textconv='xxx' log --no-textconv -Sfoo error: cannot run xxx: No such file or directory fatal: unable to read files to diff Reported-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Simon Ruderich <simon@ruderich.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-04diffcore-pickaxe: remove fill_one()Libravatar Jeff King1-20/+10
fill_one is _almost_ identical to just calling fill_textconv; the exception is that for the !DIFF_FILE_VALID case, fill_textconv gives us an empty buffer rather than a NULL one. Since we currently use the NULL pointer as a signal that the file is not present on one side of the diff, we must now switch to using DIFF_FILE_VALID to make the same check. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Simon Ruderich <simon@ruderich.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-04diffcore-pickaxe: remove unnecessary call to get_textconv()Libravatar Simon Ruderich1-9/+14
The fill_one() function is responsible for finding and filling the textconv filter as necessary, and is called by diff_grep() function that implements "git log -G<pattern>". The has_changes() function that implements "git log -S<block>" calls get_textconv() for two sides being compared, before it checks to see if it was asked to perform the pickaxe limiting. Move the code around to avoid this wastage. After has_changes() calls get_textconv() to obtain textconv for both sides, fill_one() is called to use them. By adding get_textconv() to diff_grep() and relieving fill_one() of responsibility to find the textconv filter, we can avoid calling get_textconv() twice in has_changes(). With this change it's also no longer necessary for fill_one() to modify the textconv argument, therefore pass a pointer instead of a pointer to a pointer. Signed-off-by: Simon Ruderich <simon@ruderich.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-28pickaxe: use textconv for -S countingLibravatar Jeff King1-17/+39
We currently just look at raw blob data when using "-S" to pickaxe. This is mostly historical, as pickaxe predates the textconv feature. If the user has bothered to define a textconv filter, it is more likely that their search string will be on the textconv output, as that is what they will see in the diff (and we do not even provide a mechanism for them to search for binary needles that contain NUL characters). This patch teaches "-S" to use textconv, just as we already do for "-G". Signed-off-by: Jeff King <peff@peff.net>
2012-10-28pickaxe: hoist empty needle checkLibravatar Jeff King1-2/+3
If we are given an empty pickaxe needle like "git log -S ''", it is impossible for us to find anything (because no matter what the content, the count will always be 0). We currently check this at the lowest level of contains(). Let's hoist the logic much earlier to has_changes(), so that it is simpler to return our answer before loading any blob data. Signed-off-by: Jeff King <peff@peff.net>
2012-10-28diff_grep: use textconv buffers for add/deleted filesLibravatar Jeff King1-2/+2
If you use "-G" to grep a diff, we will apply a configured textconv filter to the data before generating the diff. However, if the diff is an addition or deletion, we do not bother running the diff at all, and just look for the token in the added (or removed) content. This works because we know that the diff must contain every line of content. However, while we used the textconv-derived buffers in the regular diff, we accidentally passed the original unmodified buffers to regexec when checking the added or removed content. This could lead to an incorrect answer. Worse, in some cases we might have a textconv buffer but no original buffer (e.g., if we pulled the textconv data from cache, or if we reused a working tree file when generating it). In that case, we could actually feed NULL to regexec and segfault. Reported-by: Peter Oberndorfer <kumbayo84@arcor.de> Signed-off-by: Jeff King <peff@peff.net>
2012-02-28pickaxe: allow -i to search in patch case-insensitivelyLibravatar Junio C Hamano1-2/+7
"git log -S<string>" is a useful way to find the last commit in the codebase that touched the <string>. As it was designed to be used by a porcelain script to dig the history starting from a block of text that appear in the starting commit, it never had to look for anything but an exact match. When used by an end user who wants to look for the last commit that removed a string (e.g. name of a variable) that he vaguely remembers, however, it is useful to support case insensitive match. When given the "--regexp-ignore-case" (or "-i") option, which originally was designed to affect case sensitivity of the search done in the commit log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is done case insensitively now. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: factor out pickaxeLibravatar René Scharfe1-67/+43
Move the duplicate diff queue loop into its own function that accepts a match function: has_changes() for -S and diff_grep() for -G. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: give diff_grep the same signature as has_changesLibravatar René Scharfe1-3/+4
Change diff_grep() to match the signature of has_changes() as a preparation for the next patch that will use function pointers to the two. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: pass diff_options to contains and has_changesLibravatar René Scharfe1-14/+14
Remove the unused parameter needle from contains() and has_changes(). Also replace the parameter len with a pointer to the diff_options. We can use its member pickaxe to check if the needle is an empty string and use the kwsmatch structure to find out the length of the match instead. This change is done as a preparation to unify the signatures of has_changes() and diff_grep(), which will be used in the patch after the next one to factor out common code. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: factor out has_changesLibravatar René Scharfe1-36/+21
Move duplicate if/else construct into its own helper function. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: plug regex/kws leakLibravatar René Scharfe1-6/+7
With -S... --pickaxe-all, free the regex or the kws before returning even if we found a match. Also get rid of the variable has_changes, as we can simply break out of the loop. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: plug regex leakLibravatar René Scharfe1-7/+6
With -G... --pickaxe-all, free the regex before returning even if we found a match. Also get rid of the variable has_changes, as we can simply break out of the loop. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07pickaxe: plug diff filespec leak with empty needleLibravatar René Scharfe1-2/+2
Check first for the unlikely case of an empty needle string and only then populate the filespec, lest we leak it. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-20Use kwset in pickaxeLibravatar Fredrik Kuivinen1-11/+23
Benchmarks in the hot cache case: before: $ perf stat --repeat=5 git log -Sqwerty Performance counter stats for 'git log -Sqwerty' (5 runs): 47,092,744 cache-misses # 2.825 M/sec ( +- 1.607% ) 123,368,389 cache-references # 7.400 M/sec ( +- 0.812% ) 330,040,998 branch-misses # 3.134 % ( +- 0.257% ) 10,530,896,750 branches # 631.663 M/sec ( +- 0.121% ) 62,037,201,030 instructions # 1.399 IPC ( +- 0.142% ) 44,331,294,321 cycles # 2659.073 M/sec ( +- 0.326% ) 96,794 page-faults # 0.006 M/sec ( +- 11.952% ) 25 CPU-migrations # 0.000 M/sec ( +- 25.266% ) 1,424 context-switches # 0.000 M/sec ( +- 0.540% ) 16671.708650 task-clock-msecs # 0.997 CPUs ( +- 0.343% ) 16.728692052 seconds time elapsed ( +- 0.344% ) after: $ perf stat --repeat=5 git log -Sqwerty Performance counter stats for 'git log -Sqwerty' (5 runs): 51,385,522 cache-misses # 4.619 M/sec ( +- 0.565% ) 129,177,880 cache-references # 11.611 M/sec ( +- 0.219% ) 319,222,775 branch-misses # 6.946 % ( +- 0.134% ) 4,595,913,233 branches # 413.086 M/sec ( +- 0.112% ) 31,395,042,533 instructions # 1.062 IPC ( +- 0.129% ) 29,558,348,598 cycles # 2656.740 M/sec ( +- 0.204% ) 93,224 page-faults # 0.008 M/sec ( +- 4.487% ) 19 CPU-migrations # 0.000 M/sec ( +- 10.425% ) 950 context-switches # 0.000 M/sec ( +- 0.360% ) 11125.796039 task-clock-msecs # 0.997 CPUs ( +- 0.239% ) 11.164216599 seconds time elapsed ( +- 0.240% ) So the kwset code is about 33% faster. Signed-off-by: Fredrik Kuivinen <frekui@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06diffcore-pickaxe.c: a void function shouldn't try to return somethingLibravatar Brandon Casey1-2/+2
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Merge branch 'maint'Libravatar Junio C Hamano1-2/+1
* maint: Documentation/git-clone: describe --mirror more verbosely do not depend on signed integer overflow work around buggy S_ISxxx(m) implementations xdiff: cast arguments for ctype functions to unsigned char init: plug tiny one-time memory leak diffcore-pickaxe.c: remove unnecessary curly braces t3020 (ls-files-error-unmatch): remove stray '1' from end of file setup: make sure git dir path is in a permanent buffer environment.c: remove unused variable git-svn: fix processing of decorated commit hashes git-svn: check_cherry_pick should exclude commits already in our history Documentation/git-svn: discourage "noMetadata"
2010-10-05diffcore-pickaxe.c: remove unnecessary curly bracesLibravatar Brandon Casey1-2/+1
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31git log/diff: add -G<regexp> that greps in the patch textLibravatar Junio C Hamano1-1/+149
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the "git diff" family of commands. This limits the diff queue to filepairs whose patch text actually has an added or a deleted line that matches the given regexp. Unlike "-S<regexp>", changing other parts of the line that has a substring that matches the given regexp IS counted as a change, as such a change would appear as one deletion followed by one addition in a patch text. Unlike -S (pickaxe) that is intended to be used to quickly detect a commit that changes the number of occurrences of hits between the preimage and the postimage to serve as a part of larger toolchain, this is meant to be used as the top-level Porcelain feature. The implementation unfortunately has to run "diff" twice if you are running "log" family of commands to produce patches in the final output (e.g. "git log -p" or "git format-patch"). I think we _could_ cache the result in-core if we wanted to, but that would require larger surgery to the diffcore machinery (i.e. adding an extra pointer in the filepair structure to keep a pointer to a strbuf around, stuff the textual diff to the strbuf inside diffgrep_consume(), and make use of it in later stages when it is available) and it may not be worth it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31diff: pass the entire diff-options to diffcore_pickaxe()Libravatar Junio C Hamano1-1/+3
That would make it easier to give enhanced feature to the pickaxe transformation. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-07Add a macro DIFF_QUEUE_CLEAR.Libravatar Bo Yang1-2/+1
Refactor the diff_queue_struct code, this macro help to reset the structure. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-17pickaxe: count regex matches only onceLibravatar René Scharfe1-2/+4
When --pickaxe-regex is used, forward past the end of matches instead of advancing to the byte after their start. This way matches count only once, even if the regular expression matches their tail -- like in the fixed-string fork of the code. E.g.: /.*/ used to count the number of bytes instead of the number of lines. /aa/ resulted in a count of two in "aaa" instead of one. Also document the fact that regexec() needs a NUL-terminated string as its second argument by adding an assert(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-02diffcore-pickaxe: use memmem()Libravatar René Scharfe1-10/+8
Use memmem() instead of open-coding it. The system libraries usually have a much faster version than the memcmp()-loop here. Even our own fall-back in compat/, which is used on Windows, is slightly faster. The following commands were run in a Linux kernel repository and timed, the best of five results is shown: $ STRING='Ensure that the real time constraints are schedulable.' $ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null On Ubuntu 8.10 x64, before (v1.6.2-rc2): 8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+30952minor)pagefaults 0swaps And with the patch: 1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+30645minor)pagefaults 0swaps On Fedora 10 x64, before: 8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+29268minor)pagefaults 0swaps And with the patch: 1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+32253minor)pagefaults 0swaps On Windows Vista x64, before: real 0m9.204s user 0m0.000s sys 0m0.000s And with the patch: real 0m8.470s user 0m0.000s sys 0m0.000s Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+1
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>