summaryrefslogtreecommitdiff
path: root/diff.h
AgeCommit message (Collapse)AuthorFilesLines
2018-05-08merge: add merge.renames config settingLibravatar Ben Peart1-0/+1
Add the ability to control rename detection for merge via a config setting. This setting behaves the same and defaults to the value of diff.renames but only applies to merge. Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Ben Peart <benpeart@microsoft.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14Merge branch 'nd/diff-stat-with-summary'Libravatar Junio C Hamano1-0/+1
"git diff" and friends learned "--compact-summary" that shows the information usually given with the "--summary" option on the same line as the diffstat output of the "--stat" option (which saves vertical space and keeps info on a single path at the same place). * nd/diff-stat-with-summary: diff: add --compact-summary diff.c: refactor pprint_rename() to use strbuf
2018-02-27diff: add --compact-summaryLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Certain information is currently shown with --summary, but when used in combination with --stat it's a bit hard to read since info of the same file is in two places (--stat and --summary). On top of that, commits that add or remove files double the number of display lines, which could be a lot if you add or remove a lot of files. --compact-summary embeds most of --summary back in --stat in the little space between the file name part and the graph line, e.g. with commit 0433d533f1: Documentation/merge-config.txt | 4 + builtin/merge.c | 2 + ...-pull-verify-signatures.sh (new +x) | 81 ++++++++++++++ t/t7612-merge-verify-signatures.sh | 45 ++++++++ 4 files changed, 132 insertions(+) It helps both condensing information and saving some text space. What's new in diffstat is: - A new 0644 file is shown as (new) - A new 0755 file is shown as (new +x) - A new symlink is shown as (new +l) - A deleted file is shown as (gone) - A mode change adding executable bit is shown as (mode +x) - A mode change removing it is shown as (mode -x) Note that --compact-summary does not contain all the information --summary provides. Rewrite percentage is not shown but it could be added later, like R50% or C20%. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-23Merge branch 'sb/diff-blobfind-pickaxe'Libravatar Junio C Hamano1-2/+11
"diff" family of commands learned "--find-object=<object-id>" option to limit the findings to changes that involve the named object. * sb/diff-blobfind-pickaxe: diff: use HAS_MULTI_BITS instead of counting bits manually diff: properly error out when combining multiple pickaxe options diffcore: add a pickaxe option to find a specific blob diff: introduce DIFF_PICKAXE_KINDS_MASK diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit diff.h: make pickaxe_opts an unsigned bit field
2018-01-04diffcore: add a pickaxe option to find a specific blobLibravatar Stefan Beller1-1/+7
Sometimes users are given a hash of an object and they want to identify it further (ex.: Use verify-pack to find the largest blobs, but what are these? or [1]) One might be tempted to extend git-describe to also work with blobs, such that `git describe <blob-id>` gives a description as '<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer number of responses (>110), it turns out this is tricky to get right. The hard part to get right is picking the correct 'commit-ish' as that could be the commit that (re-)introduced the blob or the blob that removed the blob; the blob could exist in different branches. Junio hinted at a different approach of solving this problem, which this patch implements. Teach the diff machinery another flag for restricting the information to what is shown. For example: $ ./git log --oneline --find-object=v2.0.0:Makefile b2feb64309 Revert the whole "ask curl-config" topic for now 47fbfded53 i18n: only extract comments marked with "TRANSLATORS:" we observe that the Makefile as shipped with 2.0 was appeared in v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The reason why these commits both occur prior to v2.0.0 are evil merges that are not found using this new mechanism. [1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob [2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/ Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diff: introduce DIFF_PICKAXE_KINDS_MASKLibravatar Stefan Beller1-0/+2
Currently the check whether to perform pickaxing is done via checking `diffopt->pickaxe`, which contains the command line argument that we want to pickaxe for. Soon we'll introduce a new type of pickaxing, that will not store anything in the `.pickaxe` field, so let's migrate the check to be dependent on pickaxe_opts. It is not enough to just replace the check for pickaxe by pickaxe_opts, because flags might be set, but pickaxing was not requested ('-i'). To cope with that, introduce a mask to check only for the bits indicating the modes of operation. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bitLibravatar Stefan Beller1-1/+2
Currently flags for pickaxing are found in different places. Unify the flags into the `pickaxe_opts` field, which will contain any pickaxe related flags. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-04diff.h: make pickaxe_opts an unsigned bit fieldLibravatar Stefan Beller1-1/+1
This variable is used as a bit field[1], and as we are about to add more fields, indicate its usage as a bit field by making it unsigned. [1] containing the bits #define DIFF_PICKAXE_ALL 1 #define DIFF_PICKAXE_REGEX 2 #define DIFF_PICKAXE_KIND_S 4 #define DIFF_PICKAXE_KIND_G 8 Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-28diff: support anchoring line(s)Libravatar Jonathan Tan1-0/+4
Teach diff a new algorithm, one that attempts to prevent user-specified lines from appearing as a deletion or addition in the end result. The end user can use this by specifying "--anchored=<text>" one or more times when using Git commands like "diff" and "show". Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-09Merge branch 'bw/diff-opt-impl-to-bitfields'Libravatar Junio C Hamano1-39/+49
A single-word "unsigned flags" in the diff options is being split into a structure with many bitfields. * bw/diff-opt-impl-to-bitfields: diff: make struct diff_flags members lowercase diff: remove DIFF_OPT_CLR macro diff: remove DIFF_OPT_SET macro diff: remove DIFF_OPT_TST macro diff: remove touched flags diff: add flag to indicate textconv was set via cmdline diff: convert flags to be stored in bitfields add, reset: use DIFF_OPT_SET macro to set a diff flag
2017-11-06Merge branch 'jk/revision-pruning-optim'Libravatar Junio C Hamano1-0/+1
Pathspec-limited revision traversal was taught not to keep finding unneeded differences once it knows two trees are different inside given pathspec. * jk/revision-pruning-optim: revision: quit pruning diff more quickly when possible
2017-11-01diff: make struct diff_flags members lowercaseLibravatar Brandon Williams1-31/+31
Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_CLR macroLibravatar Brandon Williams1-2/+0
Remove the `DIFF_OPT_CLR` macro and instead set the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_CLR(&E, fld) + E.flags.fld = 0 @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_CLR(ptr, fld) + ptr->flags.fld = 0 Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_SET macroLibravatar Brandon Williams1-1/+0
Remove the `DIFF_OPT_SET` macro and instead set the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_SET(&E, fld) + E.flags.fld = 1 @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_SET(ptr, fld) + ptr->flags.fld = 1 Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_TST macroLibravatar Brandon Williams1-1/+0
Remove the `DIFF_OPT_TST` macro and instead access the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_TST(&E, fld) + E.flags.fld @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_TST(ptr, fld) + ptr->flags.fld Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove touched flagsLibravatar Brandon Williams1-4/+2
Now that the set of parallel touched flags are no longer being used, remove them. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: add flag to indicate textconv was set via cmdlineLibravatar Brandon Williams1-0/+1
git-show is unique in that it wants to use textconv by default except for when it is showing blobs. When asked to show a blob, show doesn't want to use textconv unless the user explicitly requested that it be used by providing the command line flag '--textconv'. Currently this is done by using a parallel set of 'touched' flags which get set every time a particular flag is set or cleared. In a future patch we want to eliminate this parallel set of flags so instead of relying on if the textconv flag has been touched, add a new flag 'TEXTCONV_SET_VIA_CMDLINE' which is only set if textconv is set to true via the command line. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: convert flags to be stored in bitfieldsLibravatar Brandon Williams1-39/+54
We cannot add many more flags to the diff machinery due to the limitations of the number of flags that can be stored in a single unsigned int. In order to allow for more flags to be added to the diff machinery in the future this patch converts the flags to be stored in bitfields in 'struct diff_flags'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-14revision: quit pruning diff more quickly when possibleLibravatar Jeff King1-0/+1
When the revision traversal machinery is given a pathspec, we must compute the parent-diff for each commit to determine which ones are TREESAME. We set the QUICK diff flag to avoid looking at more entries than we need; we really just care whether there are any changes at all. But there is one case where we want to know a bit more: if --remove-empty is set, we care about finding cases where the change consists only of added entries (in which case we may prune the parent in try_to_simplify_commit()). To cover that case, our file_add_remove() callback does not quit the diff upon seeing an added entry; it keeps looking for other types of entries. But this means when --remove-empty is not set (and it is not by default), we compute more of the diff than is necessary. You can see this in a pathological case where a commit adds a very large number of entries, and we limit based on a broad pathspec. E.g.: perl -e ' chomp(my $blob = `git hash-object -w --stdin </dev/null`); for my $a (1..1000) { for my $b (1..1000) { print "100644 $blob\t$a/$b\n"; } } ' | git update-index --index-info git commit -qm add git rev-list HEAD -- . This case takes about 100ms now, but after this patch only needs 6ms. That's not a huge improvement, but it's easy to get and it protects us against even more pathological cases (e.g., going from 1 million to 10 million files would take ten times as long with the current code, but not increase at all after this patch). This is reported to minorly speed-up pathspec limiting in real world repositories (like the 100-million-file Windows repository), but probably won't make a noticeable difference outside of pathological setups. This patch actually covers the case without --remove-empty, and the case where we see only deletions. See the in-code comment for details. Note that we have to add a new member to the diff_options struct so that our callback can see the value of revs->remove_empty_trees. This callback parameter could be passed to the "add_remove" and "change" callbacks, but there's not much point. They already receive the diff_options struct, and doing it this way avoids having to update the function signature of the other callbacks (arguably the format_callback and output_prefix functions could benefit from the same simplification). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-16diff: define block by number of alphanumeric charsLibravatar Jonathan Tan1-1/+1
The existing behavior of diff --color-moved=zebra does not define the minimum size of a block at all, instead relying on a heuristic applied later to filter out sets of adjacent moved lines that are shorter than 3 lines long. This can be confusing, because a block could thus be colored as moved at the source but not at the destination (or vice versa), depending on its neighbors. Instead, teach diff that the minimum size of a block is 20 alphanumeric characters, the same heuristic used by "git blame". This allows diff to still exclude uninteresting lines appearing on their own (such as those solely consisting of one or a few closing braces), as was the intention of the adjacent-moved-line heuristic. This requires a change in some tests in that some of their lines are no longer considered to be part of a block, because they are too short. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: add dimming to moved line detectionLibravatar Stefan Beller1-2/+7
Any lines inside a moved block of code are not interesting. Boundaries of blocks are only interesting if they are next to another block of moved code. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: color moved lines differently, plain modeLibravatar Stefan Beller1-0/+1
Add the 'plain' mode for move detection of code. This omits the checking for adjacent blocks, so it is not as useful. If you have a lot of the same blocks moved in the same patch, the 'Zebra' would end up slow as it is O(n^2) (n is number of same blocks). So this may be useful there and is generally easy to add. Instead be very literal at the move detection, do not skip over short blocks here. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: color moved lines differentlyLibravatar Stefan Beller1-1/+11
When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: buffer all output if asked toLibravatar Stefan Beller1-0/+2
Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: convert show_stats to use emit_diff_symbolLibravatar Stefan Beller1-2/+2
We call print_stat_summary from builtin/apply, so we still need the version with a file pointer, so introduce print_stat_summary_0 that uses emit_string machinery and keep print_stat_summary with the same arguments around. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30submodule.c: migrate diff output to use emit_diff_symbolLibravatar Stefan Beller1-0/+9
As the submodule process is no longer attached to the same file pointer 'o->file' as the superprojects process, there is a different result in color.c::check_auto_color. That is why we need to pass coloring explicitly, such that the submodule coloring decision will be made by the child process processing the submodule. Only DIFF_SYMBOL_SUBMODULE_PIPETHROUGH contains color, the other symbols are for embedding the submodule output into the superprojects output. Remove the colors from the function signatures, as all the coloring decisions will be made either inside the child process or the final emit_diff_symbol, but not in the functions driving the submodule diff. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30diff.c: migrate emit_line_checked to use emit_diff_symbolLibravatar Stefan Beller1-3/+3
Add a new flags field to emit_diff_symbol, that will be used by context lines for: * white space rules that are applicable (The first 12 bits) Take a note in cahe.c as well, when this ws rules are extended we have to fix the bits in the flags field. * how the rules are evaluated (actually this double encodes the sign of the line, but the code is easier to keep this way, bits 13,14,15) * if the line a blank line at EOF (bit 16) The check if new lines need to be marked up as extra lines at the end of file, is now done unconditionally. That should be ok, as 'new_blank_line_at_eof' has a quick early return. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-19Merge branch 'bw/object-id'Libravatar Junio C Hamano1-19/+19
Conversion from uchar[20] to struct object_id continues. * bw/object-id: (33 commits) diff: rename diff_fill_sha1_info to diff_fill_oid_info diffcore-rename: use is_empty_blob_oid tree-diff: convert path_appendnew to object_id tree-diff: convert diff_tree_paths to struct object_id tree-diff: convert try_to_follow_renames to struct object_id builtin/diff-tree: cleanup references to sha1 diff-tree: convert diff_tree_sha1 to struct object_id notes-merge: convert write_note_to_worktree to struct object_id notes-merge: convert verify_notes_filepair to struct object_id notes-merge: convert find_notes_merge_pair_ps to struct object_id notes-merge: convert merge_from_diffs to struct object_id notes-merge: convert notes_merge* to struct object_id tree-diff: convert diff_root_tree_sha1 to struct object_id combine-diff: convert find_paths_* to struct object_id combine-diff: convert diff_tree_combined to struct object_id diff: convert diff_flush_patch_id to struct object_id patch-ids: convert to struct object_id diff: finish conversion for prepare_temp_file to struct object_id diff: convert reuse_worktree_file to struct object_id diff: convert fill_filespec to struct object_id ...
2017-06-05tree-diff: convert diff_tree_paths to struct object_idLibravatar Brandon Williams1-2/+2
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-05diff-tree: convert diff_tree_sha1 to struct object_idLibravatar Brandon Williams1-2/+3
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-05Merge branch 'js/blame-lib'Libravatar Junio C Hamano1-0/+7
The internal logic used in "git blame" has been libified to make it easier to use by cgit. * js/blame-lib: (29 commits) blame: move entry prepend to libgit blame: move scoreboard setup to libgit blame: move scoreboard-related methods to libgit blame: move fake-commit-related methods to libgit blame: move origin-related methods to libgit blame: move core structures to header blame: create entry prepend function blame: create scoreboard setup function blame: create scoreboard init function blame: rework methods that determine 'final' commit blame: wrap blame_sort and compare_blame_final blame: move progress updates to a scoreboard callback blame: make sanity_check use a callback in scoreboard blame: move no_whole_file_rename flag to scoreboard blame: move xdl_opts flags to scoreboard blame: move show_root flag to scoreboard blame: move reverse flag to scoreboard blame: move contents_from to scoreboard blame: move copy/move thresholds to scoreboard blame: move stat counters to scoreboard ...
2017-06-02tree-diff: convert diff_root_tree_sha1 to struct object_idLibravatar Brandon Williams1-2/+2
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02combine-diff: convert diff_tree_combined to struct object_idLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_flush_patch_id to struct object_idLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_change to struct object_idLibravatar Brandon Williams1-7/+6
Convert diff_change to take a struct object_id. In addition convert the function pointer type 'change_fn_t' to also take a struct object_id. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_addremove to struct object_idLibravatar Brandon Williams1-4/+4
Convert diff_addremove to take a struct object_id. In addtion convert the function pointer type 'add_remove_fn_t' to also take a struct object_id. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-24blame: move textconv_object with related functionsLibravatar Jeff Smith1-0/+7
textconv_object is used in places other than blame.c and should be moved to a more appropriate location. Other textconv related functions are located in diff.c so that seems as good a place as any. Signed-off-by: Jeff Smith <whydoubt@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08diff-lib: convert do_diff_cache to struct object_idLibravatar brian m. carlson1-1/+1
This is needed to convert parse_tree_indirect. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31Rename sha1_array to oid_arrayLibravatar brian m. carlson1-2/+2
Since this structure handles an array of object IDs, rename it to struct oid_array. Also rename the accessor functions and the initialization constant. This commit was produced mechanically by providing non-Documentation files to the following Perl one-liners: perl -pi -E 's/struct sha1_array/struct oid_array/g' perl -pi -E 's/\bsha1_array_/oid_array_/g' perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g' Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-27Merge branch 'nd/ita-empty-commit'Libravatar Junio C Hamano1-1/+2
When new paths were added by "git add -N" to the index, it was enough to circumvent the check by "git commit" to refrain from making an empty commit without "--allow-empty". The same logic prevented "git status" to show such a path as "new file" in the "Changes not staged for commit" section. * nd/ita-empty-commit: commit: don't be fooled by ita entries when creating initial commit commit: fix empty commit creation when there's no changes but ita entries diff: add --ita-[in]visible-in-index diff-lib: allow ita entries treated as "not yet exist in index"
2016-10-26diff_aligned_abbrev: use "struct oid"Libravatar Jeff King1-1/+1
Since we're modifying this function anyway, it's a good time to update it to the more modern "struct oid". We can also drop some of the magic numbers in favor of GIT_SHA1_HEXSZ, along with some descriptive comments. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-26diff_unique_abbrev: rename to diff_aligned_abbrevLibravatar Jeff King1-1/+5
The word "align" describes how the function actually differs from find_unique_abbrev, and will make it less confusing when we add more diff-specific abbrevation functions that do not do this alignment. Since this is a globally available function, let's also move its descriptive comment to the header file, where we typically document function interfaces. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-24commit: fix empty commit creation when there's no changes but ita entriesLibravatar Nguyễn Thái Ngọc Duy1-1/+1
If i-t-a entries are present and there is no change between the index and HEAD i-t-a entries, index_differs_from() still returns "dirty, new entries" (aka, the resulting commit is not empty), but cache-tree will skip i-t-a entries and produce the exact same tree of current commit. index_differs_from() is supposed to catch this so we can abort git-commit (unless --no-empty is specified). Update it to optionally ignore i-t-a entries when doing a diff between the index and HEAD so that it would return "no change" in this case and abort commit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-24diff-lib: allow ita entries treated as "not yet exist in index"Libravatar Nguyễn Thái Ngọc Duy1-0/+1
When comparing the index and the working tree to show which paths are new, and comparing the tree recorded in the HEAD and the index to see if committing the contents recorded in the index would result in an empty commit, we would want the former comparison to say "these are new paths" and the latter to say "there is no change" for paths that are marked as intent-to-add. We made a similar attempt at d95d728a ("diff-lib.c: adjust position of i-t-a entries in diff", 2015-03-16), which redefined the semantics of these two comparison modes globally, which was a disaster and had to be reverted at 78cc1a54 ("Revert "diff-lib.c: adjust position of i-t-a entries in diff"", 2015-06-23). To make sure we do not repeat the same mistake, introduce a new internal diffopt option so that this different semantics can be asked for only by callers that ask it, while making sure other unaudited callers will get the same comparison result. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26Merge branch 'mh/diff-indent-heuristic'Libravatar Junio C Hamano1-0/+1
Output from "git diff" can be made easier to read by selecting which lines are common and which lines are added/deleted intelligently when the lines before and after the changed section are the same. A command line option is added to help with the experiment to find a good heuristics. * mh/diff-indent-heuristic: blame: honor the diff heuristic options and config parse-options: add parse_opt_unknown_cb() diff: improve positioning of add/delete blocks in diffs xdl_change_compact(): introduce the concept of a change group recs_match(): take two xrecord_t pointers as arguments is_blank_line(): take a single xrecord_t as argument xdl_change_compact(): only use heuristic if group can't be matched xdl_change_compact(): fix compaction heuristic to adjust ixo
2016-09-19blame: honor the diff heuristic options and configLibravatar Michael Haggerty1-0/+1
Teach "git blame" and "git annotate" the --compaction-heuristic and --indent-heuristic options that are now supported by "git diff". Also teach them to honor the `diff.compactionHeuristic` and `diff.indentHeuristic` configuration options. It would be conceivable to introduce separate configuration options for "blame" and "annotate"; for example `blame.compactionHeuristic` and `blame.indentHeuristic`. But it would be confusing to users if blame output is inconsistent with diff output, so it makes more sense for them to respect the same configuration. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-12Merge branch 'jk/diff-submodule-diff-inline'Libravatar Junio C Hamano1-2/+9
The "git diff --submodule={short,log}" mechanism has been enhanced to allow "--submodule=diff" to show the patch between the submodule commits bound to the superproject. * jk/diff-submodule-diff-inline: diff: teach diff to display submodule difference with an inline diff submodule: refactor show_submodule_summary with helper function submodule: convert show_submodule_summary to use struct object_id * allow do_submodule_path to work even if submodule isn't checked out diff: prepare for additional submodule formats graph: add support for --line-prefix on all graph-aware output diff.c: remove output_prefix_length field cache: add empty_tree_oid object and helper function
2016-08-31diff: teach diff to display submodule difference with an inline diffLibravatar Jacob Keller1-1/+2
Teach git-diff and friends a new format for displaying the difference of a submodule. The new format is an inline diff of the contents of the submodule between the commit range of the update. This allows the user to see the actual code change caused by a submodule update. Add tests for the new format and option. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31diff: prepare for additional submodule formatsLibravatar Jacob Keller1-1/+6
A future patch will add a new format for displaying the difference of a submodule. Make it easier by changing how we store the current selected format. Replace the DIFF_OPT flag with an enumeration, as each format will be mutually exclusive. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31graph: add support for --line-prefix on all graph-aware outputLibravatar Jacob Keller1-0/+2
Add an extension to git-diff and git-log (and any other graph-aware displayable output) such that "--line-prefix=<string>" will print the additional line-prefix on every line of output. To make this work, we have to fix a few bugs in the graph API that force graph_show_commit_msg to be used only when you have a valid graph. Additionally, we extend the default_diff_output_prefix handler to work even when no graph is enabled. This is somewhat of a hack on top of the graph API, but I think it should be acceptable here. This will be used by a future extension of submodule display which displays the submodule diff as the actual diff between the pre and post commit in the submodule project. Add some tests for both git-log and git-diff to ensure that the prefix is honored correctly. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>