summaryrefslogtreecommitdiff
path: root/diff.c
AgeCommit message (Collapse)AuthorFilesLines
2012-03-06Merge branch 'jc/maint-diff-patch-header'Libravatar Junio C Hamano1-1/+1
By Junio C Hamano * jc/maint-diff-patch-header: diff -p: squelch "diff --git" header for stat-dirty paths t4011: illustrate "diff-index -p" on stat-dirty paths t4011: modernise style
2012-03-06Merge branch 'zj/diff-stat-dyncol'Libravatar Junio C Hamano1-27/+87
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1) * zj/diff-stat-dyncol: : This breaks tests. Perhaps it is not worth using the decimal-width stuff : for this series, at least initially. diff --stat: add config option to limit graph width diff --stat: enable limiting of the graph part diff --stat: add a test for output with COLUMNS=40 diff --stat: use a maximum of 5/8 for the filename part merge --stat: use the full terminal width log --stat: use the full terminal width show --stat: use the full terminal width diff --stat: use the full terminal width diff --stat: tests for long filenames and big change counts
2012-03-01diff -p: squelch "diff --git" header for stat-dirty pathsLibravatar Junio C Hamano1-1/+1
The plumbing "diff" commands look at the working tree files without refreshing the index themselves for performance reasons (the calling script is expected to do that upfront just once, before calling one or more of them). In the early days of git, they showed the "diff --git" header before they actually ask the xdiff machinery to produce patches, and ended up showing only these headers if the real contents are the same and the difference they noticed was only because the stat info cached in the index did not match that of the working tree. It was too late for the implementation to take the header that it already emitted back. But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19) introduced necessary logic to keep the meta-information headers in a strbuf and delay their output until the xdiff machinery noticed actual changes. This was primarily in order to generate patches that ignore whitespaces. When operating under "-w" mode, we wouldn't know if the header is needed until we actually look at the resulting patch, so it was a sensible thing to do, but we did not realize that the same reasoning applies to stat-dirty paths. Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary file, 2010-05-26) generalized this machinery and added must_show_header toggle. This is turned on when the header must be shown even when there is no patch to be produced, e.g. only the mode was changed, or the path was renamed, without changing the contents. However, when it did so, it still kept the special case for the "-w" mode, which meant that the plumbing would keep showing these phantom changes. This corrects this historical inconsistency by allowing the plumbing to omit paths that are only stat-dirty from its output in the same way as it handles whitespace only changes under "-w" option. The change in the behaviour can be seen in the updated test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: add config option to limit graph widthLibravatar Zbigniew Jędrzejewski-Szmek1-0/+8
Config option diff.statGraphWidth=<width> is equivalent to --stat-graph-width=<width>, except that the config option is ignored by format-patch. For the graph-width limiting to be usable, it should happen 'automatically' once configured, hence the config option. Nevertheless, graph width limiting only makes sense when used on a wide terminal, so it should not influence the output of format-patch, which adheres to the 80-column standard. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: enable limiting of the graph partLibravatar Zbigniew Jędrzejewski-Szmek1-2/+21
A new option --stat-graph-width=<width> can be used to limit the width of the graph part even is more space is available. Up to <width> columns will be used for the graph. If commits changing a lot of lines are displayed in a wide terminal window (200 or more columns), and the +- graph uses the full width, the output can be hard to comfortably scan with a horizontal movement of human eyes. Messages wrapped to about 80 columns would be interspersed with very long +- lines. It makes sense to limit the width of the graph part to a fixed value (e.g. 70 columns), even if more columns are available. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use a maximum of 5/8 for the filename partLibravatar Zbigniew Jędrzejewski-Szmek1-30/+60
The way that available columns are divided between the filename part and the graph part is modified to use as many columns as necessary for the filenames and the rest for the graph. If there isn't enough columns to print both the filename and the graph, at least 5/8 of available space is devoted to filenames. On a standard 80 column terminal, or if not connected to a terminal and using the default of 80 columns, this gives the same partition as before. The effect of this change is visible in the patch to the test vector in t4052; with a small change with long filename, it stops truncating the name part too short, and also allocates a bit more columns to the graph for larger changes. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-1/+4
Default to the real terminal width for diff --stat output, instead of the hard-coded 80 columns. Some projects (especially in Java), have long filename paths, with nested directories or long individual filenames. When files are renamed, the filename part in stat output can be almost useless. If the middle part between { and } is long (because the file was moved to a completely different directory), then most of the path would be truncated. It makes sense to detect and use the full terminal width and display full filenames if possible. The are commands like diff, show, and log, which can adapt the output to the terminal width. There are also commands like format-patch, whose output should be independent of the terminal width. Since it is safer to use the 80-column default, the real terminal width is only used if requested by the calling code by setting diffopts.stat_width=-1. Normally this value is 0, and can be set by the user only to a non-negative value, so -1 is safe to use internally. This patch only changes the diff builtin to use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-24Merge branches zj/decimal-width, zj/term-columns and jc/diff-stat-scalerLibravatar Junio C Hamano1-7/+20
2012-02-20Merge branch 'jc/diff-stat-scaler'Libravatar Junio C Hamano1-7/+20
* jc/diff-stat-scaler: diff --stat: show bars of same length for paths with same amount of changes
2012-02-14diff --stat: show bars of same length for paths with same amount of changesLibravatar Junio C Hamano1-7/+20
When commit 3ed74e6 (diff --stat: ensure at least one '-' for deletions, and one '+' for additions, 2006-09-28) improved the output for files with tiny modifications, we accidentally broke the logic to ensure that two equal sized changes are shown with the bars of the same length, even when rounding errors exist. Compute the length of the graph bars, using the same "non-zero changes is shown with at least one column" scaling logic, but by scaling the sum of additions and deletions to come up with the total length of the bar (this ensures that two equal sized changes result in bars of the same length), and then scaling the smaller of the additions or deletions. The other side is computed as the difference between the two. This makes the apportioning between additions and deletions less accurate due to rounding errors, but it is much less noticeable than two files with the same amount of change showing bars of different length. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-14Merge branch 'jk/userdiff-config-simplify'Libravatar Junio C Hamano1-5/+2
* jk/userdiff-config-simplify: drop odd return value semantics from userdiff_config
2012-02-07drop odd return value semantics from userdiff_configLibravatar Jeff King1-5/+2
When the userdiff_config function was introduced in be58e70 (diff: unify external diff and funcname parsing code, 2008-10-05), it used a return value convention unlike any other config callback. Like other callbacks, it used "-1" to signal error. But it returned "1" to indicate that it found something, and "0" otherwise; other callbacks simply returned "0" to indicate that no error occurred. This distinction was necessary at the time, because the userdiff namespace overlapped slightly with the color configuration namespace. So "diff.color.foo" could mean "the 'foo' slot of diff coloring" or "the 'foo' component of the "color" userdiff driver". Because the color-parsing code would die on an unknown color slot, we needed the userdiff code to indicate that it had matched the variable, letting us bypass the color-parsing code entirely. Later, in 8b8e862 (ignore unknown color configuration, 2009-12-12), the color-parsing code learned to silently ignore unknown slots. This means we no longer need to protect userdiff-matched variables from reaching the color-parsing code. We can therefore change the userdiff_config calling convention to a more normal one. This drops some code from each caller, which is nice. But more importantly, it reduces the cognitive load for readers who may wonder why userdiff_config is unlike every other config callback. There's no need to add a new test confirming that this works; t4020 already contains a test that sets diff.color.external. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-03Use correct grammar in diffstat summary lineLibravatar Nguyễn Thái Ngọc Duy1-5/+51
"git diff --stat" and "git apply --stat" now learn to print the line "%d files changed, %d insertions(+), %d deletions(-)" in singular form whenever applicable. "0 insertions" and "0 deletions" are also omitted unless they are both zero. This matches how versions of "diffstat" that are not prehistoric produced their output, and also makes this line translatable. [jc: with help from Thomas Dickey in archaeology of "diffstat"] [jc: squashed Jonathan's updates to illustrations in tutorials and a test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'tr/maint-word-diff-incomplete-line'Libravatar Junio C Hamano1-0/+9
* tr/maint-word-diff-incomplete-line: word-diff: ignore '\ No newline at eof' marker
2012-01-12word-diff: ignore '\ No newline at eof' markerLibravatar Thomas Rast1-0/+9
The word-diff logic accumulates + and - lines until another line type appears (normally [ @\]), at which point it generates the word diff. This is usually correct, but it breaks when the preimage does not have a newline at EOF: $ printf "%s" "a a a" >a $ printf "%s\n" "a ab a" >b $ git diff --no-index --word-diff a b diff --git 1/a 2/b index 9f68e94..6a7c02f 100644 --- 1/a +++ 2/b @@ -1 +1 @@ [-a a a-] No newline at end of file {+a ab a+} Because of the order of the lines in a unified diff @@ -1 +1 @@ -a a a \ No newline at end of file +a ab a the '\' line flushed the buffers, and the - and + lines were never matched with each other. A proper fix would defer such markers until the end of the hunk. However, word-diff is inherently whitespace-ignoring, so as a cheap fix simply ignore the marker (and hide it from the output). We use a prefix match for '\ ' to parallel the logic in apply.c:parse_fragment(). We currently do not localize this string (just accept other variants of it in git-apply), but this should be future-proof. Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-19Merge branch 'rs/diff-whole-function'Libravatar Junio C Hamano1-0/+8
* rs/diff-whole-function: diff: add option to show whole functions as context xdiff: factor out get_func_line()
2011-10-13Merge branch 'rs/diff-cleanup-records-fix'Libravatar Junio C Hamano1-0/+4
* rs/diff-cleanup-records-fix: diff: resurrect XDF_NEED_MINIMAL with --minimal Revert removal of multi-match discard heuristic in 27af01
2011-10-10Merge branch 'jc/maint-diffstat-numstat-context'Libravatar Junio C Hamano1-0/+2
* jc/maint-diffstat-numstat-context: diff: teach --stat/--numstat to honor -U$num
2011-10-10diff: add option to show whole functions as contextLibravatar René Scharfe1-0/+8
Add the option -W/--function-context to git diff. It is similar to the same option of git grep and expands the context of change hunks so that the whole surrounding function is shown. This "natural" context can allow changes to be understood better. Note: GNU patch doesn't like diffs generated with the new option; it seems to expect context lines to be the same before and after changes. git apply doesn't complain. This implementation has the same shortcoming as the one in grep, namely that there is no way to explicitly find the end of a function. That means that a few lines of extra context are shown, right up to the next recognized function begins. It's already useful in its current form, though. The function get_func_line() in xdiff/xemit.c is extended to work forward as well as backward to find post-context as well as pre-context. It returns the position of the first found matching line. The func_line parameter is made optional, as we don't need it for -W. The enhanced function is then used in xdl_emit_diff() to extend the context as needed. If the added context overlaps with the next change, it is merged into the current hunk. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-03diff: resurrect XDF_NEED_MINIMAL with --minimalLibravatar Junio C Hamano1-0/+4
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02) unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff invocation to help performance on pathological cases, while hinting that a follow-up patch could reintroduce it with "--minimal" option from the command line. Make it so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22diff: teach --stat/--numstat to honor -U$numLibravatar Junio C Hamano1-0/+2
"git diff -p" piped to external diffstat and "git diff --stat" may see different patch text (both are valid and describe the same change correctly) when counting the number of added and deleted lines, arriving at different results to confuse the users, as --stat/--numstat codepath always uses the hardcoded -U0 as the context length. Make --stat/--numstat codepath to honor the context length the same way as the textual patch codepath does to avoid this problem. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'jk/color-and-pager'Libravatar Junio C Hamano1-28/+25
* jk/color-and-pager: want_color: automatically fallback to color.ui diff: don't load color config in plumbing config: refactor get_colorbool function color: delay auto-color decision until point of use git_config_colorbool: refactor stdout_is_tty handling diff: refactor COLOR_DIFF from a flag into an int setup_pager: set GIT_PAGER_IN_USE t7006: use test_config helpers test-lib: add helper functions for config t7006: modernize calls to unset Conflicts: builtin/commit.c parse-options.c
2011-08-19diff: don't load color config in plumbingLibravatar Jeff King1-1/+4
The diff config callback is split into two functions: one which loads "ui" config, and one which loads "basic" config. The former chains to the latter, as the diff UI config is a superset of the plumbing config. The color.diff variable is only loaded in the UI config. However, the basic config actually chains to git_color_default_config, which loads color.ui. This doesn't actually cause any bugs, because the plumbing diff code does not actually look at the value of color.ui. However, it is somewhat nonsensical, and it makes it difficult to refactor the color code. It probably came about because there is no git_color_config to load only color config, but rather just git_color_default_config, which loads color config and chains to git_default_config. This patch splits out the color-specific portion of git_color_default_config so that the diff UI config can call it directly. This is perhaps better explained by the chaining of callbacks. Before we had: git_diff_ui_config -> git_diff_basic_config -> git_color_default_config -> git_default_config Now we have: git_diff_ui_config -> git_color_config -> git_diff_basic_config -> git_default_config Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19color: delay auto-color decision until point of useLibravatar Jeff King1-10/+7
When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18git_config_colorbool: refactor stdout_is_tty handlingLibravatar Jeff King1-2/+2
Usually this function figures out for itself whether stdout is a tty. However, it has an extra parameter just to allow git-config to override the auto-detection for its --get-colorbool option. Instead of an extra parameter, let's just use a global variable. This makes calling easier in the common case, and will make refactoring the colorbool code much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18diff: refactor COLOR_DIFF from a flag into an intLibravatar Jeff King1-22/+19
This lets us store more than just a bit flag for whether we want color; we can also store whether we want automatic colors. This can be useful for making the automatic-color decision closer to the point of use. This mostly just involves replacing DIFF_OPT_* calls with manipulations of the flag. The biggest exception is that calls to DIFF_OPT_TST must check for "o->use_color > 0", which lets an "unknown" value (i.e., the default) stay at "no color". In the previous code, a value of "-1" was not propagated at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-17Merge branch 'rc/histogram-diff'Libravatar Junio C Hamano1-0/+2
* rc/histogram-diff: xdiff/xhistogram: drop need for additional variable xdiff/xhistogram: rely on xdl_trim_ends() xdiff/xhistogram: rework handling of recursed results xdiff: do away with xdl_mmfile_next() Make test number unique xdiff/xprepare: use a smaller sample size for histogram diff xdiff/xprepare: skip classification teach --histogram to diff t4033-diff-patience: factor out tests xdiff/xpatience: factor out fall-back-diff function xdiff/xprepare: refactor abort cleanups xdiff/xprepare: use memset()
2011-08-16Merge branch 'jc/zlib-wrap' into maintLibravatar Junio C Hamano1-5/+5
* jc/zlib-wrap: zlib: allow feeding more than 4GB in one go zlib: zlib can only process 4GB at a time zlib: wrap deflateBound() too zlib: wrap deflate side of the API zlib: wrap inflateInit2 used to accept only for gzip format zlib: wrap remaining calls to direct inflate/inflateEnd zlib wrapper: refactor error message formatter
2011-08-16Merge branch 'jk/combine-diff-binary-etc' into maintLibravatar Junio C Hamano1-13/+1
* jk/combine-diff-binary-etc: combine-diff: respect textconv attributes refactor get_textconv to not require diff_filespec combine-diff: handle binary files as binary combine-diff: calculate mode_differs earlier combine-diff: split header printing into its own function
2011-07-19Merge branch 'jc/zlib-wrap'Libravatar Junio C Hamano1-5/+5
* jc/zlib-wrap: zlib: allow feeding more than 4GB in one go zlib: zlib can only process 4GB at a time zlib: wrap deflateBound() too zlib: wrap deflate side of the API zlib: wrap inflateInit2 used to accept only for gzip format zlib: wrap remaining calls to direct inflate/inflateEnd zlib wrapper: refactor error message formatter Conflicts: sha1_file.c
2011-07-12teach --histogram to diffLibravatar Tay Ray Chuan1-0/+2
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show that it is faster than its --patience cousin, as well as the default Meyers algorithm. The implementation has been reworked to use structs and pointers, instead of bitmasks, thus doing away with JGit's 2^28 line limit. We also use xdiff's default hash table implementation (xdl_hash_bits() with XDL_HASHLONG()) for convenience. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-29Merge branch 'mg/diff-stat-count'Libravatar Junio C Hamano1-9/+45
* mg/diff-stat-count: diff --stat-count: finishing touches diff-options.txt: describe --stat-{width,name-width,count} diff: introduce --stat-lines to limit the stat lines diff.c: omit hidden entries from namelen calculation with --stat
2011-06-29Merge branch 'jk/combine-diff-binary-etc'Libravatar Junio C Hamano1-13/+1
* jk/combine-diff-binary-etc: combine-diff: respect textconv attributes refactor get_textconv to not require diff_filespec combine-diff: handle binary files as binary combine-diff: calculate mode_differs earlier combine-diff: split header printing into its own function
2011-06-10zlib: zlib can only process 4GB at a timeLibravatar Junio C Hamano1-1/+1
The size of objects we read from the repository and data we try to put into the repository are represented in "unsigned long", so that on larger architectures we can handle objects that weigh more than 4GB. But the interface defined in zlib.h to communicate with inflate/deflate limits avail_in (how many bytes of input are we calling zlib with) and avail_out (how many bytes of output from zlib are we ready to accept) fields effectively to 4GB by defining their type to be uInt. In many places in our code, we allocate a large buffer (e.g. mmap'ing a large loose object file) and tell zlib its size by assigning the size to avail_in field of the stream, but that will truncate the high octets of the real size. The worst part of this story is that we often pass around z_stream (the state object used by zlib) to keep track of the number of used bytes in input/output buffer by inspecting these two fields, which practically limits our callchain to the same 4GB limit. Wrap z_stream in another structure git_zstream that can express avail_in and avail_out in unsigned long. For now, just die() when the caller gives a size that cannot be given to a single zlib call. In later patches in the series, we would make git_inflate() and git_deflate() internally loop to give callers an illusion that our "improved" version of zlib interface can operate on a buffer larger than 4GB in one go. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10zlib: wrap deflateBound() tooLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10zlib: wrap deflate side of the APILibravatar Junio C Hamano1-3/+3
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use of deflateInit2 in remote-curl.c to tell the library to use gzip header and trailer in git_deflate_init_gzip(). There is only one caller that cares about the status from deflateEnd(). Introduce git_deflate_end_gently() to let that sole caller retrieve the status and act on it (i.e. die) for now, but we would probably want to make inflate_end/deflate_end die when they ran out of memory and get rid of the _gently() kind. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-06Merge branch 'jk/diff-not-so-quick'Libravatar Junio C Hamano1-0/+7
* jk/diff-not-so-quick: diff: futureproof "stop feeding the backend early" logic diff_tree: disable QUICK optimization with diff filter Conflicts: diff.c
2011-05-31Merge branch 'jc/rename-degrade-cc-to-c' into maintLibravatar Junio C Hamano1-0/+26
* jc/rename-degrade-cc-to-c: diffcore-rename: fall back to -C when -C -C busts the rename limit diffcore-rename: record filepair for rename src diffcore-rename: refactor "too many candidates" logic builtin/diff.c: remove duplicated call to diff_result_code()
2011-05-31diff: futureproof "stop feeding the backend early" logicLibravatar Junio C Hamano1-0/+7
Refactor the "do not stop feeding the backend early" logic into a small helper function and use it in both run_diff_files() and diff_tree() that has the stop-early optimization. We may later add other types of diffcore transformation that require to look at the whole result like diff-filter does, and having the logic in a single place is essential for longer term maintainability. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27diff --stat-count: finishing touchesLibravatar Junio C Hamano1-2/+4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27diff: introduce --stat-lines to limit the stat linesLibravatar Michael J Gruber1-4/+34
Often one is interested in the full --stat output only for commits which change a few files, but not others, because larger restructuring gives a --stat which fills a few screens. Introduce a new option --stat-count=<count> which limits the --stat output to the first <count> lines, followed by a "..." line. It can also be given as the third parameter in --stat=<width>,<name-width>,<count>. Also, the unstuck form is supported analogous to the other two stat parameters. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27diff.c: omit hidden entries from namelen calculation with --statLibravatar Michael J Gruber1-5/+9
Currently, --stat calculates the longest name from all items but then drops some (mode changes) from the output later on. Instead, drop them from the namelen generation and calculation. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-26Merge branch 'jm/maint-diff-words-with-sbe' into maintLibravatar Junio C Hamano1-2/+10
* jm/maint-diff-words-with-sbe: do not read beyond end of malloc'd buffer
2011-05-23refactor get_textconv to not require diff_filespecLibravatar Jeff King1-13/+1
This function actually does two things: 1. Load the userdiff driver for the filespec. 2. Decide whether the driver has a textconv component, and initialize the textconv cache if applicable. Only part (1) requires the filespec object, and some callers may not have a filespec at all. So let's split them it into two functions, and put part (2) with the userdiff code, which is a better fit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-23Merge branch 'jm/maint-diff-words-with-sbe'Libravatar Junio C Hamano1-2/+10
* jm/maint-diff-words-with-sbe: do not read beyond end of malloc'd buffer
2011-05-20do not read beyond end of malloc'd bufferLibravatar Jim Meyering1-2/+10
With diff.suppress-blank-empty=true, "git diff --word-diff" would output data that had been read from uninitialized heap memory. The problem was that fn_out_consume did not account for the possibility of a line with length 1, i.e., the empty context line that diff.suppress-blank-empty=true converts from " \n" to "\n". Since it assumed there would always be a prefix character (the space), it decremented "len" unconditionally, thus passing len=0 to emit_line, which would then blindly call emit_line_0 with len=-1 which would pass that value on to fwrite as SIZE_MAX. Boom. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-13Merge branch 'jh/dirstat-lines'Libravatar Junio C Hamano1-19/+152
* jh/dirstat-lines: Mark dirstat error messages for translation Improve error handling when parsing dirstat parameters New --dirstat=lines mode, doing dirstat analysis based on diffstat Allow specifying --dirstat cut-off percentage as a floating point number Add config variable for specifying default --dirstat behavior Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file Make --dirstat=0 output directories that contribute < 0.1% of changes Add several testcases for --dirstat and friends
2011-05-13Merge branch 'jc/fix-diff-files-unmerged' into maintLibravatar Junio C Hamano1-6/+6
* jc/fix-diff-files-unmerged: diff-files: show unmerged entries correctly diff: remove often unused parameters from diff_unmerge() diff.c: return filepair from diff_unmerge() test: use $_z40 from test-lib
2011-05-06Merge branch 'jc/fix-diff-files-unmerged'Libravatar Junio C Hamano1-6/+6
* jc/fix-diff-files-unmerged: diff-files: show unmerged entries correctly diff: remove often unused parameters from diff_unmerge() diff.c: return filepair from diff_unmerge() test: use $_z40 from test-lib
2011-05-04Merge branch 'jh/dirstat' into maintLibravatar Junio C Hamano1-5/+37
* jh/dirstat: --dirstat: In case of renames, use target filename instead of source filename Teach --dirstat not to completely ignore rearranged lines within a file --dirstat-by-file: Make it faster and more correct --dirstat: Describe non-obvious differences relative to --stat or regular diff