summaryrefslogtreecommitdiff
path: root/diff.c
AgeCommit message (Collapse)AuthorFilesLines
2012-06-15Merge branch 'as/diff-shortstat-ignore-binary'Libravatar Junio C Hamano1-1/+1
# By Alexander Strasser * as/diff-shortstat-ignore-binary: diff: Only count lines in show_shortstats
2012-06-15diff: Only count lines in show_shortstatsLibravatar Alexander Strasser1-1/+1
Do not mix byte and line counts. Binary files have byte counts; skip them when accumulating line insertions/deletions. The regression was introduced in e18872b. Signed-off-by: Alexander Strasser <eclipse7@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-07Merge branch 'zj/diff-empty-chmod'Libravatar Junio C Hamano1-16/+27
"git diff --stat" used to fully count a binary file with modified execution bits whose contents is unmodified, which was not right. By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1) * zj/diff-empty-chmod: t4006: Windows do not have /dev/zero diff --stat: do not run diff on indentical files diff --stat: report mode-only changes for binary files like text files tests: check --[short]stat output after chmod test: modernize style of t4006 Conflicts: diff.c
2012-05-02Merge branch 'zj/diff-stat-smaller-num-columns'Libravatar Junio C Hamano1-10/+38
Spend only minimum number of columns necessary to show the number of lines in the output from "diff --stat", instead of always allocating 4 columns even when showing changes that are much smaller than 1000 lines. By Zbigniew Jędrzejewski-Szmek * zj/diff-stat-smaller-num-columns: diff --stat: use less columns for change counts
2012-05-02Merge branch 'lp/diffstat-with-graph'Libravatar Junio C Hamano1-2/+6
"log --graph" was not very friendly with "--stat" option and its output had line breaks at wrong places. By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (2) * lp/diffstat-with-graph: t4052: work around shells unable to set COLUMNS to 1 Prevent graph_width of stat width from falling below min t4052: Test diff-stat output with minimum columns t4052: Adjust --graph --stat output for prefixes Adjust stat width calculations to take --graph output into account Add output_prefix_length to diff_options t4052: test --stat output with --graph
2012-05-01diff --stat: do not run diff on indentical filesLibravatar Zbigniew Jędrzejewski-Szmek1-2/+5
If two objects are known to be equal, there is no point running the diff. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01diff --stat: report mode-only changes for binary files like text filesLibravatar Zbigniew Jędrzejewski-Szmek1-15/+23
Mode-only changes to binary files without content change were reported as if they were rewritten, but text files in the same situation were reported as "unchanged". Let's treat binary files like text files here, and simply say that they are unchanged. Output of --shortstat is modified in the same way. Reported-by: Martin Mareš <mj@ucw.cz> Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-30diff --stat: use less columns for change countsLibravatar Zbigniew Jędrzejewski-Szmek1-10/+38
Number of columns required for change counts is now computed based on the maximum number of changed lines instead of being fixed. This means that usually a few more columns will be available for the filenames and the graph. The graph width logic is also modified to include enough space for "Bin XXX -> YYY bytes". If changes to binary files are mixed with changes to text files, change counts are padded to take at least three columns. And the other way around, if change counts require more than three columns, then "Bin"s are padded to align with the change count. This way, the +- part starts in the same column as "XXX -> YYY" part for binary files. This makes the graph easier to parse visually thanks to the empty column. This mimics the layout of diff --stat before this change. Tests and the tutorial are updated to reflect the new --stat output. This means either the removal of extra padding and/or the addition of up to three extra characters to truncated filenames. One test is added to check the graph alignment when a binary file change and text file change of more than 999 lines are committed together. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-23Merge branch 'lp/maint-diff-three-dash-with-graph'Libravatar Junio C Hamano1-0/+6
"log -p --graph" used with "--stat" had a few formatting error. By Lucian Poston * lp/maint-diff-three-dash-with-graph: t4202: add test for "log --graph --stat -p" separator lines log --graph: fix break in graph lines log --graph --stat: three-dash separator should come after graph lines
2012-04-18Prevent graph_width of stat width from falling below minLibravatar Lucian Poston1-1/+5
Update tests in t4052 fixed by this change. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-16Merge branch 'jk/diff-no-rename-empty'Libravatar Junio C Hamano1-0/+5
Forbids rename detection logic from matching two empty files as renames during merge-recursive to prevent mismerges. By Jeff King * jk/diff-no-rename-empty: merge-recursive: don't detect renames of empty files teach diffcore-rename to optionally ignore empty content make is_empty_blob_sha1 available everywhere drop casts from users EMPTY_TREE_SHA1_BIN
2012-04-16Adjust stat width calculations to take --graph output into accountLibravatar Lucian Poston1-1/+1
The recent change to compute the width of diff --stat did not take into consideration the output from --graph. The consequence is that when both options are used, e.g. in 'log --stat --graph', the lines are too long. Adjust stat width calculations to take --graph output into account. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-15Merge branch 'tr/maint-word-diff-regex-sticky'Libravatar Junio C Hamano1-56/+66
The regexp configured with wordregex was incorrectly reused across files. By Thomas Rast (2) and Johannes Sixt (1) * tr/maint-word-diff-regex-sticky: diff: tweak a _copy_ of diff_options with word-diff diff: refactor the word-diff setup from builtin_diff_cmd t4034: diff.*.wordregex should not be "sticky" in --word-diff
2012-04-15Merge branch 'jc/diff-algo-cleanup'Libravatar Junio C Hamano1-2/+2
Resurrects the preparatory clean-up patches from another topic that was discarded, as this would give a saner foundation to build on diff.algo configuration option series. * jc/diff-algo-cleanup: xdiff: PATIENCE/HISTOGRAM are not independent option bits xdiff: remove XDL_PATCH_* macros
2012-03-23teach diffcore-rename to optionally ignore empty contentLibravatar Jeff King1-0/+5
Our rename detection is a heuristic, matching pairs of removed and added files with similar or identical content. It's unlikely to be wrong when there is actual content to compare, and we already take care not to do inexact rename detection when there is not enough content to produce good results. However, we always do exact rename detection, even when the blob is tiny or empty. It's easy to get false positives with an empty blob, simply because it is an obvious content to use as a boilerplate (e.g., when telling git that an empty directory is worth tracking via an empty .gitignore). This patch lets callers specify whether or not they are interested in using empty files as rename sources and destinations. The default is "yes", keeping the original behavior. It works by detecting the empty-blob sha1 for rename sources and destinations. One more flexible alternative would be to allow the caller to specify a minimum size for a blob to be "interesting" for rename detection. But that would catch small boilerplate files, not large ones (e.g., if you had the GPL COPYING file in many directories). A better alternative would be to allow a "-rename" gitattribute to allow boilerplate files to be marked as such. I'll leave the complexity of that solution until such time as somebody actually wants it. The complaints we've seen so far revolve around empty files, so let's start with the simple thing. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20log --graph: fix break in graph linesLibravatar Lucian Poston1-0/+6
Output from "git log --graph --stat -p" broke the ancestry graph lines with a single empty line between the diffstat and the patch. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-14diff: tweak a _copy_ of diff_options with word-diffLibravatar Thomas Rast1-1/+4
When using word diff, the code sets the word_regex from various defaults if it was not set already. The problem is that it does this on the original diff_options, which will also be used in subsequent diffs. This means that when the word_regex is not given on the command line, only the first diff for which a setting for word_regex (either from attributes or diff.wordRegex) ever takes effect. This value then propagates to the rest of the diff runs and in particular prevents further attribute lookups. Fix the problem of changing diff state once and for all, by working with a _copy_ of the diff_options. Noticed-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-14diff: refactor the word-diff setup from builtin_diff_cmdLibravatar Thomas Rast1-56/+63
Quite a chunk of builtin_diff_cmd deals with word-diff setup, defaults and such. This makes the function a bit hard to read, but is also asymmetric because the corresponding teardown lives in free_diff_words_data already. Refactor into a new function init_diff_words_data. For simplicity, also shuffle around some functions it depends on. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-12Merge branch 'jc/maint-diff-patch-header' into maintLibravatar Junio C Hamano1-1/+1
"git diff-index" and its friends at the plumbing level showed the "diff --git" header and nothing else for a path whose cached stat info is dirty without actual difference when asked to produce a patch. This was a longstanding bug that we could have fixed long time ago. By Junio C Hamano * jc/maint-diff-patch-header: diff -p: squelch "diff --git" header for stat-dirty paths t4011: illustrate "diff-index -p" on stat-dirty paths t4011: modernise style
2012-03-06Merge branch 'jc/maint-diff-patch-header'Libravatar Junio C Hamano1-1/+1
By Junio C Hamano * jc/maint-diff-patch-header: diff -p: squelch "diff --git" header for stat-dirty paths t4011: illustrate "diff-index -p" on stat-dirty paths t4011: modernise style
2012-03-06Merge branch 'zj/diff-stat-dyncol'Libravatar Junio C Hamano1-27/+87
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1) * zj/diff-stat-dyncol: : This breaks tests. Perhaps it is not worth using the decimal-width stuff : for this series, at least initially. diff --stat: add config option to limit graph width diff --stat: enable limiting of the graph part diff --stat: add a test for output with COLUMNS=40 diff --stat: use a maximum of 5/8 for the filename part merge --stat: use the full terminal width log --stat: use the full terminal width show --stat: use the full terminal width diff --stat: use the full terminal width diff --stat: tests for long filenames and big change counts
2012-03-01diff -p: squelch "diff --git" header for stat-dirty pathsLibravatar Junio C Hamano1-1/+1
The plumbing "diff" commands look at the working tree files without refreshing the index themselves for performance reasons (the calling script is expected to do that upfront just once, before calling one or more of them). In the early days of git, they showed the "diff --git" header before they actually ask the xdiff machinery to produce patches, and ended up showing only these headers if the real contents are the same and the difference they noticed was only because the stat info cached in the index did not match that of the working tree. It was too late for the implementation to take the header that it already emitted back. But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19) introduced necessary logic to keep the meta-information headers in a strbuf and delay their output until the xdiff machinery noticed actual changes. This was primarily in order to generate patches that ignore whitespaces. When operating under "-w" mode, we wouldn't know if the header is needed until we actually look at the resulting patch, so it was a sensible thing to do, but we did not realize that the same reasoning applies to stat-dirty paths. Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary file, 2010-05-26) generalized this machinery and added must_show_header toggle. This is turned on when the header must be shown even when there is no patch to be produced, e.g. only the mode was changed, or the path was renamed, without changing the contents. However, when it did so, it still kept the special case for the "-w" mode, which meant that the plumbing would keep showing these phantom changes. This corrects this historical inconsistency by allowing the plumbing to omit paths that are only stat-dirty from its output in the same way as it handles whitespace only changes under "-w" option. The change in the behaviour can be seen in the updated test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: add config option to limit graph widthLibravatar Zbigniew Jędrzejewski-Szmek1-0/+8
Config option diff.statGraphWidth=<width> is equivalent to --stat-graph-width=<width>, except that the config option is ignored by format-patch. For the graph-width limiting to be usable, it should happen 'automatically' once configured, hence the config option. Nevertheless, graph width limiting only makes sense when used on a wide terminal, so it should not influence the output of format-patch, which adheres to the 80-column standard. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: enable limiting of the graph partLibravatar Zbigniew Jędrzejewski-Szmek1-2/+21
A new option --stat-graph-width=<width> can be used to limit the width of the graph part even is more space is available. Up to <width> columns will be used for the graph. If commits changing a lot of lines are displayed in a wide terminal window (200 or more columns), and the +- graph uses the full width, the output can be hard to comfortably scan with a horizontal movement of human eyes. Messages wrapped to about 80 columns would be interspersed with very long +- lines. It makes sense to limit the width of the graph part to a fixed value (e.g. 70 columns), even if more columns are available. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use a maximum of 5/8 for the filename partLibravatar Zbigniew Jędrzejewski-Szmek1-30/+60
The way that available columns are divided between the filename part and the graph part is modified to use as many columns as necessary for the filenames and the rest for the graph. If there isn't enough columns to print both the filename and the graph, at least 5/8 of available space is devoted to filenames. On a standard 80 column terminal, or if not connected to a terminal and using the default of 80 columns, this gives the same partition as before. The effect of this change is visible in the patch to the test vector in t4052; with a small change with long filename, it stops truncating the name part too short, and also allocates a bit more columns to the graph for larger changes. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-1/+4
Default to the real terminal width for diff --stat output, instead of the hard-coded 80 columns. Some projects (especially in Java), have long filename paths, with nested directories or long individual filenames. When files are renamed, the filename part in stat output can be almost useless. If the middle part between { and } is long (because the file was moved to a completely different directory), then most of the path would be truncated. It makes sense to detect and use the full terminal width and display full filenames if possible. The are commands like diff, show, and log, which can adapt the output to the terminal width. There are also commands like format-patch, whose output should be independent of the terminal width. Since it is safer to use the 80-column default, the real terminal width is only used if requested by the calling code by setting diffopts.stat_width=-1. Normally this value is 0, and can be set by the user only to a non-negative value, so -1 is safe to use internally. This patch only changes the diff builtin to use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-24Merge branches zj/decimal-width, zj/term-columns and jc/diff-stat-scalerLibravatar Junio C Hamano1-7/+20
2012-02-21Merge branch 'jc/diff-stat-scaler' into maintLibravatar Junio C Hamano1-7/+20
* jc/diff-stat-scaler: diff --stat: show bars of same length for paths with same amount of changes
2012-02-20Merge branch 'jc/diff-stat-scaler'Libravatar Junio C Hamano1-7/+20
* jc/diff-stat-scaler: diff --stat: show bars of same length for paths with same amount of changes
2012-02-19xdiff: PATIENCE/HISTOGRAM are not independent option bitsLibravatar Junio C Hamano1-2/+2
Because the default Myers, patience and histogram algorithms cannot be in effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not independent bits. Instead of wasting one bit per algorithm, define a few macros to access the few bits they occupy and update the code that access them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-14diff --stat: show bars of same length for paths with same amount of changesLibravatar Junio C Hamano1-7/+20
When commit 3ed74e6 (diff --stat: ensure at least one '-' for deletions, and one '+' for additions, 2006-09-28) improved the output for files with tiny modifications, we accidentally broke the logic to ensure that two equal sized changes are shown with the bars of the same length, even when rounding errors exist. Compute the length of the graph bars, using the same "non-zero changes is shown with at least one column" scaling logic, but by scaling the sum of additions and deletions to come up with the total length of the bar (this ensures that two equal sized changes result in bars of the same length), and then scaling the smaller of the additions or deletions. The other side is computed as the difference between the two. This makes the apportioning between additions and deletions less accurate due to rounding errors, but it is much less noticeable than two files with the same amount of change showing bars of different length. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-14Merge branch 'jk/userdiff-config-simplify'Libravatar Junio C Hamano1-5/+2
* jk/userdiff-config-simplify: drop odd return value semantics from userdiff_config
2012-02-07drop odd return value semantics from userdiff_configLibravatar Jeff King1-5/+2
When the userdiff_config function was introduced in be58e70 (diff: unify external diff and funcname parsing code, 2008-10-05), it used a return value convention unlike any other config callback. Like other callbacks, it used "-1" to signal error. But it returned "1" to indicate that it found something, and "0" otherwise; other callbacks simply returned "0" to indicate that no error occurred. This distinction was necessary at the time, because the userdiff namespace overlapped slightly with the color configuration namespace. So "diff.color.foo" could mean "the 'foo' slot of diff coloring" or "the 'foo' component of the "color" userdiff driver". Because the color-parsing code would die on an unknown color slot, we needed the userdiff code to indicate that it had matched the variable, letting us bypass the color-parsing code entirely. Later, in 8b8e862 (ignore unknown color configuration, 2009-12-12), the color-parsing code learned to silently ignore unknown slots. This means we no longer need to protect userdiff-matched variables from reaching the color-parsing code. We can therefore change the userdiff_config calling convention to a more normal one. This drops some code from each caller, which is nice. But more importantly, it reduces the cognitive load for readers who may wonder why userdiff_config is unlike every other config callback. There's no need to add a new test confirming that this works; t4020 already contains a test that sets diff.color.external. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-03Use correct grammar in diffstat summary lineLibravatar Nguyễn Thái Ngọc Duy1-5/+51
"git diff --stat" and "git apply --stat" now learn to print the line "%d files changed, %d insertions(+), %d deletions(-)" in singular form whenever applicable. "0 insertions" and "0 deletions" are also omitted unless they are both zero. This matches how versions of "diffstat" that are not prehistoric produced their output, and also makes this line translatable. [jc: with help from Thomas Dickey in archaeology of "diffstat"] [jc: squashed Jonathan's updates to illustrations in tutorials and a test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'tr/maint-word-diff-incomplete-line'Libravatar Junio C Hamano1-0/+9
* tr/maint-word-diff-incomplete-line: word-diff: ignore '\ No newline at eof' marker
2012-01-12word-diff: ignore '\ No newline at eof' markerLibravatar Thomas Rast1-0/+9
The word-diff logic accumulates + and - lines until another line type appears (normally [ @\]), at which point it generates the word diff. This is usually correct, but it breaks when the preimage does not have a newline at EOF: $ printf "%s" "a a a" >a $ printf "%s\n" "a ab a" >b $ git diff --no-index --word-diff a b diff --git 1/a 2/b index 9f68e94..6a7c02f 100644 --- 1/a +++ 2/b @@ -1 +1 @@ [-a a a-] No newline at end of file {+a ab a+} Because of the order of the lines in a unified diff @@ -1 +1 @@ -a a a \ No newline at end of file +a ab a the '\' line flushed the buffers, and the - and + lines were never matched with each other. A proper fix would defer such markers until the end of the hunk. However, word-diff is inherently whitespace-ignoring, so as a cheap fix simply ignore the marker (and hide it from the output). We use a prefix match for '\ ' to parallel the logic in apply.c:parse_fragment(). We currently do not localize this string (just accept other variants of it in git-apply), but this should be future-proof. Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-01Merge branch 'jc/maint-diffstat-numstat-context' into maintLibravatar Junio C Hamano1-0/+2
* jc/maint-diffstat-numstat-context: diff: teach --stat/--numstat to honor -U$num
2011-10-21Merge branch 'rs/diff-cleanup-records-fix' into maintLibravatar Junio C Hamano1-0/+4
* rs/diff-cleanup-records-fix: diff: resurrect XDF_NEED_MINIMAL with --minimal Revert removal of multi-match discard heuristic in 27af01
2011-10-19Merge branch 'rs/diff-whole-function'Libravatar Junio C Hamano1-0/+8
* rs/diff-whole-function: diff: add option to show whole functions as context xdiff: factor out get_func_line()
2011-10-13Merge branch 'rs/diff-cleanup-records-fix'Libravatar Junio C Hamano1-0/+4
* rs/diff-cleanup-records-fix: diff: resurrect XDF_NEED_MINIMAL with --minimal Revert removal of multi-match discard heuristic in 27af01
2011-10-10Merge branch 'jc/maint-diffstat-numstat-context'Libravatar Junio C Hamano1-0/+2
* jc/maint-diffstat-numstat-context: diff: teach --stat/--numstat to honor -U$num
2011-10-10diff: add option to show whole functions as contextLibravatar René Scharfe1-0/+8
Add the option -W/--function-context to git diff. It is similar to the same option of git grep and expands the context of change hunks so that the whole surrounding function is shown. This "natural" context can allow changes to be understood better. Note: GNU patch doesn't like diffs generated with the new option; it seems to expect context lines to be the same before and after changes. git apply doesn't complain. This implementation has the same shortcoming as the one in grep, namely that there is no way to explicitly find the end of a function. That means that a few lines of extra context are shown, right up to the next recognized function begins. It's already useful in its current form, though. The function get_func_line() in xdiff/xemit.c is extended to work forward as well as backward to find post-context as well as pre-context. It returns the position of the first found matching line. The func_line parameter is made optional, as we don't need it for -W. The enhanced function is then used in xdl_emit_diff() to extend the context as needed. If the added context overlaps with the next change, it is merged into the current hunk. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-03diff: resurrect XDF_NEED_MINIMAL with --minimalLibravatar Junio C Hamano1-0/+4
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02) unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff invocation to help performance on pathological cases, while hinting that a follow-up patch could reintroduce it with "--minimal" option from the command line. Make it so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22diff: teach --stat/--numstat to honor -U$numLibravatar Junio C Hamano1-0/+2
"git diff -p" piped to external diffstat and "git diff --stat" may see different patch text (both are valid and describe the same change correctly) when counting the number of added and deleted lines, arriving at different results to confuse the users, as --stat/--numstat codepath always uses the hardcoded -U0 as the context length. Make --stat/--numstat codepath to honor the context length the same way as the textual patch codepath does to avoid this problem. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'jk/color-and-pager'Libravatar Junio C Hamano1-28/+25
* jk/color-and-pager: want_color: automatically fallback to color.ui diff: don't load color config in plumbing config: refactor get_colorbool function color: delay auto-color decision until point of use git_config_colorbool: refactor stdout_is_tty handling diff: refactor COLOR_DIFF from a flag into an int setup_pager: set GIT_PAGER_IN_USE t7006: use test_config helpers test-lib: add helper functions for config t7006: modernize calls to unset Conflicts: builtin/commit.c parse-options.c
2011-08-19diff: don't load color config in plumbingLibravatar Jeff King1-1/+4
The diff config callback is split into two functions: one which loads "ui" config, and one which loads "basic" config. The former chains to the latter, as the diff UI config is a superset of the plumbing config. The color.diff variable is only loaded in the UI config. However, the basic config actually chains to git_color_default_config, which loads color.ui. This doesn't actually cause any bugs, because the plumbing diff code does not actually look at the value of color.ui. However, it is somewhat nonsensical, and it makes it difficult to refactor the color code. It probably came about because there is no git_color_config to load only color config, but rather just git_color_default_config, which loads color config and chains to git_default_config. This patch splits out the color-specific portion of git_color_default_config so that the diff UI config can call it directly. This is perhaps better explained by the chaining of callbacks. Before we had: git_diff_ui_config -> git_diff_basic_config -> git_color_default_config -> git_default_config Now we have: git_diff_ui_config -> git_color_config -> git_diff_basic_config -> git_default_config Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19color: delay auto-color decision until point of useLibravatar Jeff King1-10/+7
When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18git_config_colorbool: refactor stdout_is_tty handlingLibravatar Jeff King1-2/+2
Usually this function figures out for itself whether stdout is a tty. However, it has an extra parameter just to allow git-config to override the auto-detection for its --get-colorbool option. Instead of an extra parameter, let's just use a global variable. This makes calling easier in the common case, and will make refactoring the colorbool code much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18diff: refactor COLOR_DIFF from a flag into an intLibravatar Jeff King1-22/+19
This lets us store more than just a bit flag for whether we want color; we can also store whether we want automatic colors. This can be useful for making the automatic-color decision closer to the point of use. This mostly just involves replacing DIFF_OPT_* calls with manipulations of the flag. The biggest exception is that calls to DIFF_OPT_TST must check for "o->use_color > 0", which lets an "unknown" value (i.e., the default) stay at "no color". In the previous code, a value of "-1" was not propagated at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-17Merge branch 'rc/histogram-diff'Libravatar Junio C Hamano1-0/+2
* rc/histogram-diff: xdiff/xhistogram: drop need for additional variable xdiff/xhistogram: rely on xdl_trim_ends() xdiff/xhistogram: rework handling of recursed results xdiff: do away with xdl_mmfile_next() Make test number unique xdiff/xprepare: use a smaller sample size for histogram diff xdiff/xprepare: skip classification teach --histogram to diff t4033-diff-patience: factor out tests xdiff/xpatience: factor out fall-back-diff function xdiff/xprepare: refactor abort cleanups xdiff/xprepare: use memset()