| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/maint-diff-q-filter:
diff --quiet: disable optimization when --diff-filter=X is used
|
|
The code notices that the caller does not want any detail of the changes
and only wants to know if there is a change or not by specifying --quiet.
And it breaks out of the loop when it knows it already found any change.
When you have a post-process filter (e.g. --diff-filter), however, the
path we found to be different in the previous round and set HAS_CHANGES
bit may end up being uninteresting, and there may be no output at the end.
The optimization needs to be disabled for such case.
Note that the f245194 (diff: change semantics of "ignore whitespace"
options, 2009-05-22) already disables this optimization by refraining
from setting HAS_CHANGES when post-process filters that need to inspect
the contents of the files (e.g. -S, -w) in diff_change() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some use cases it is not desirable that the diff family considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree. An example for that are scripts
which just want to check for submodule commits while ignoring any changes
to the work tree. Also users having large submodules known not to change
might want to use this option, as the - sometimes substantial - time it
takes to scan the submodule work tree(s) is saved.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/submodule-diff-dirtiness:
git status: ignoring untracked files must apply to submodules too
git status: Fix false positive "new commits" output for dirty submodules
Refactor dirty submodule detection in diff-lib.c
git status: Show detailed dirty status of submodules in long format
git diff --submodule: Show detailed dirty status of submodules
|
|
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Testing if the output "new commits" should appear in the long format of
"git status" is done by comparing the hashes of the diffpair. This always
resulted in printing "new commits" for submodules that contained untracked
or modified content, even if they did not contain new commits. The reason
was that match_stat_with_submodule() did set the "changed" flag for dirty
submodules, resulting in two->sha1 being set to the null_sha1 at the call
sites, which indicates that new commits are present. This is changed so
that when no new commits are present, the same object names are in the
sha1 field for both sides of the filepair, and the working tree side will
have the "dirty_submodule" flag set when appropriate. For a submodule to
be seen as modified even when it just has a dirty work tree, some
conditions had to be extended to also check for the "dirty_submodule"
flag.
Unfortunately the test case that should have found this bug had been
changed incorrectly too. It is fixed and extended to test for other
combinations too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Moving duplicated code into the new function match_stat_with_submodule().
Replacing the implicit activation of detailed checks for the dirtiness of
submodules when DIFF_FORMAT_PATCH was selected with explicitly setting
the recently added DIFF_OPT_DIRTY_SUBMODULES option in diff_setup_done().
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far the last parameter to setup_revisions() was to specify the default
ref when the command line did not give any (typically "HEAD"). This changes
it to take a pointer to a structure so that we can add other information without
touching too many codepaths in later patches.
There is no functionality change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 1.7.0 there are three reasons a submodule is considered modified
against the work tree: It contains new commits, modified content or
untracked content. Lets show all reasons in the long format of git status,
so the user can better asses the nature of the modification. This change
does not affect the short and porcelain formats.
Two new members are added to "struct wt_status_change_data" to store the
information gathered by run_diff_files(). wt-status.c uses the new flag
DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed
dirty information about submodules.
A hint line for submodules is printed in the dirty header when dirty
submodules are present.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.
To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/diff-submodule-ignore:
Teach diff --submodule that modified submodule directory is dirty
git diff: Don't test submodule dirtiness with --ignore-submodules
Make ce_uptodate() trustworthy again
|
|
The diff family suppresses the output of submodule changes when
requested but checks them nonetheless. But since recently submodules
get examined for their dirtiness, which is rather expensive. There is
no need to do that when the --ignore-submodules option is used, as
the gathered information is never used anyway.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
|
|
The rule has always been that a cache entry that is ce_uptodate(ce)
means that we already have checked the work tree entity and we know
there is no change in the work tree compared to the index, and nobody
should have to double check. Note that false ce_uptodate(ce) does not
mean it is known to be dirty---it only means we don't know if it is
clean.
There are a few codepaths (refresh-index and preload-index are among
them) that mark a cache entry as up-to-date based solely on the return
value from ie_match_stat(); this function uses lstat() to see if the
work tree entity has been touched, and for a submodule entry, if its
HEAD points at the same commit as the commit recorded in the index of
the superproject (a submodule that is not even cloned is considered
clean).
A submodule is no longer considered unmodified merely because its HEAD
matches the index of the superproject these days, in order to prevent
people from forgetting to commit in the submodule and updating the
superproject index with the new submodule commit, before commiting the
state in the superproject. However, the patch to do so didn't update
the codepath that marks cache entries up-to-date based on the updated
definition and instead worked it around by saying "we don't trust the
return value of ce_uptodate() for submodules."
This makes ce_uptodate() trustworthy again by not marking submodule
entries up-to-date.
The next step _could_ be to introduce a few "in-core" flag bits to
cache_entry structure to record "this entry is _known_ to be dirty",
call is_submodule_modified() from ie_match_stat(), and use these new
bits to avoid running this rather expensive check more than once, but
that can be a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the worst case is_submodule_modified() got called three times for
each submodule. The information we got from scanning the whole
submodule tree the first time can be reused instead.
New parameters have been added to diff_change() and diff_addremove(),
the information is stored in a new member of struct diff_filespec. Its
value is then reused instead of calling is_submodule_modified() again.
When no explicit "-dirty" is needed in the output the call to
is_submodule_modified() is not necessary when the submodules HEAD
already disagrees with the ref of the superproject, as this alone
marks it as modified. To achieve that, get_stat_data() got an extra
argument.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until now a submodule only then showed up as modified in the supermodule
when the last commit in the submodule differed from the one in the index
or the diffed against commit of the superproject. A dirty work tree
containing new untracked or modified files in a submodule was
undetectable when looking at it from the superproject.
Now git status and git diff (against the work tree) in the superproject
will also display submodules as modified when they contain untracked or
modified files, even if the compared ref matches the HEAD of the
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
|
|
This makes the traversal of index be in sync with the tree traversal.
When unpack_callback() is fed a set of tree entries from trees, it
inspects the name of the entry and checks if the an index entry with
the same name could be hiding behind the current index entry, and
(1) if the name appears in the index as a leaf node, it is also
fed to the n_way_merge() callback function;
(2) if the name is a directory in the index, i.e. there are entries in
that are underneath it, then nothing is fed to the n_way_merge()
callback function;
(3) otherwise, if the name comes before the first eligible entry in the
index, the index entry is first unpacked alone.
When traverse_trees_recursive() descends into a subdirectory, the
cache_bottom pointer is moved to walk index entries within that directory.
All of these are omitted for diff-index, which does not even want to be
fed an index entry and a tree entry with D/F conflicts.
This fixes 3-way read-tree and exposes a bug in other parts of the system
in t6035, test #5. The test prepares these three trees:
O = HEAD^
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x
A = HEAD
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d
100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x
B = master
120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d
100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x
With a clean index that matches HEAD, running
git read-tree -m -u --aggressive $O $A $B
now yields
120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b
100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 a/b-2/c/d
100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 1 a/b/c/d
100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 2 a/b/c/d
100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x
which is correct. "master" created "a/b" symlink that did not exist,
and removed "a/b/c/d" while HEAD did not do touch either path.
Before this series, read-tree did not notice the situation and resolved
addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had
another path "a/b/c/e" added, this merge should conflict but instead it
silently resolved "a/b" and then immediately overwrote it to add
"a/b/c/e", which was quite bogus.
Tests in t1012 start to work with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This prepares but does not yet implement a look-ahead in the index entries
when traverse-trees.c decides to give us tree entries in an order that
does not match what is in the index.
A case where a look-ahead in the index is necessary happens when merging
branch B into branch A while the index matches the current branch A, using
a tree O as their common ancestor, and these three trees looks like this:
O A B
t t
t-i t-i t-i
t-j t-j
t/1
t/2
The traverse_trees() function gets "t", "t-i" and "t" from trees O, A and
B first, and notices that A may have a matching "t" behind "t-i" and "t-j"
(indeed it does), and tells A to give that entry instead. After unpacking
blob "t" from tree B (as it hasn't changed since O in B and A removed it,
it will result in its removal), it descends into directory "t/".
The side that walked index in parallel to the tree traversal used to be
implemented with one pointer, o->pos, that points at the next index entry
to be processed. When this happens, the pointer o->pos still points at
"t-i" that is the first entry. We should be able to skip "t-i" and "t-j"
and locate "t/1" from the index while the recursive invocation of
traverse_trees() walks and match entries found there, and later come back
to process "t-i".
While that look-ahead is not implemented yet, this adds a flag bit,
CE_UNPACKED, to mark the entries in the index that has already been
processed. o->pos pointer has been renamed to o->cache_bottom and it
points at the first entry that may still need to be processed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/1.7.0-diff-whitespace-only-status:
diff.c: fix typoes in comments
Make test case number unique
diff: Rename QUIET internal option to QUICK
diff: change semantics of "ignore whitespace" options
Conflicts:
diff.h
|
|
20a16eb (unpack_trees(): fix diff-index regression., 2008-03-10) adjusted
diff-index to the new world order since 34110cd (Make 'unpack_trees()'
have a separate source and destination index, 2008-03-06). Callbacks are
expected to return anything non-negative as "success", and instead of
reporting how many index entries they have processed, they are expected to
advance o->pos themselves. The code did so, but a stale comment was left
behind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
|
|
grep: turn on --cached for files that is marked skip-worktree
ls-files: do not check for deleted file that is marked skip-worktree
update-index: ignore update request if it's skip-worktree, while still allows removing
diff*: skip worktree version
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When comparing the index and a tree, we used to read the contents of the
tree into stage #1 of the index and compared them with stage #0. In order
not to lose sight of entries originally unmerged in the index, we hoisted
them to stage #3 before reading the tree.
Commit d1f2d7e (Make run_diff_index() use unpack_trees(), not read_tree(),
2008-01-19) changed all this. These days, we instead use unpack_trees()
API to traverse the tree and compare the contents with the index, without
modifying the index at all. There is no reason to hoist the unmerged
entries to stage #3 anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since an earlier change to diff-index by d1f2d7e (Make run_diff_index()
use unpack_trees(), not read_tree(), 2008-01-19), we stopped reporting an
unmerged path that does not exist in the tree, but we should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option "QUIET" primarily meant "find if we have _any_ difference as
quick as possible and report", which means we often do not even have to
look at blobs if we know the trees are different by looking at the higher
level (e.g. "diff-tree A B"). As a side effect, because there is no point
showing one change that we happened to have found first, it also enables
NO_OUTPUT and EXIT_WITH_STATUS options, making the end result look quiet.
Rename the internal option to QUICK to reflect this better; it also makes
grepping the source tree much easier, as there are other kinds of QUIET
option everywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/cache-tree:
Avoid "diff-index --cached" optimization under --find-copies-harder
Optimize "diff-index --cached" using cache-tree
t4007: modernize the style
cache-tree.c::cache_tree_find(): simplify internal API
write-tree --ignore-cache-tree
|
|
When find-copies-harder is in effect, the diff frontends are expected to
feed all paths, not just changed paths, to the diffcore, so that copy
sources can be picked up. In such a case, not descending into subtrees
using the cache-tree information is simply wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "diff-index --cached" after making a change to only a small
portion of the index, there is no point unpacking unchanged subtrees into
the index recursively, only to find that all entries match anyway. Tweak
unpack_trees() logic that is used to read in the tree object to catch the
case where the tree entry we are looking at matches the index as a whole
by looking at the cache-tree.
As an exercise, after modifying a few paths in the kernel tree, here are
a few numbers on my Athlon 64X2 3800+:
(without patch, hot cache)
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.07user 0.02system 0:00.09elapsed 102%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+9407minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.00system 0:00.02elapsed 103%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2446minor)pagefaults 0swaps
Cold cache numbers are very impressive, but it does not matter very much
in practice:
(without patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.06user 0.17system 0:10.26elapsed 2%CPU (0avgtext+0avgdata 0maxresident)k
247032inputs+0outputs (1172major+8237minor)pagefaults 0swaps
(with patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.01system 0:01.01elapsed 3%CPU (0avgtext+0avgdata 0maxresident)k
18440inputs+0outputs (79major+2369minor)pagefaults 0swaps
This of course helps "git status" as well.
(without patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.17user 0.18system 0:00.35elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+10970minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.10user 0.16system 0:00.27elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+3921minor)pagefaults 0swaps
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/maint-diff-reduce-lstat:
Teach 'git checkout' to preload the index contents
Avoid unnecessary 'lstat()' calls in 'get_stat_data()'
|
|
When we ask get_stat_data() to get the mode and size of an index entry,
we can avoid the lstat() call if we have marked the index entry as being
uptodate due to earlier lstat() calls.
This avoids a lot of unnecessary lstat() calls in eg 'git checkout',
where the last phase shows the differences to the working tree
(requiring a diff), but earlier phases have already verified the index.
On the kernel repo (with a fast machine and everything cached), this
changes timings of a nul 'git checkout' from
- Before (best of ten):
0.14user 0.05system 0:00.19elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13237minor)pagefaults 0swaps
- After
0.11user 0.03system 0:00.15elapsed 98%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13235minor)pagefaults 0swaps
so it can obviously be noticeable, although equally obviously it's not a
show-stopper on this particular machine. The difference is likely larger
on slower machines, or with operating systems that don't do as good a job
of name caching.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
|
|
index_is_dirty() in builtin-revert.c checks if the index is dirty.
This patch generalizes this function to check if the index differs
from a revision, i.e. the former index_is_dirty() behavior can now be
achieved by index_differs_from("HEAD", 0).
The second argument "diff_flags" allows to set further diff option
flags like DIFF_OPT_IGNORE_SUBMODULES. See DIFF_OPT_* macros in diff.h
for a list.
index_differs_from() seems to be useful for more than builtin-revert.c,
so it is moved into diff-lib.c and also used in builtin-commit.c.
Yet to mention:
- "rev.abbrev = 0;" can be safely removed.
This has no impact on performance or functioning of neither
setup_revisions() nor run_diff_index().
- rev.pending.objects is free()d because this fixes a leak.
(Also see 295dd2ad "Fix memory leak in traverse_commit_list")
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit c40641b77b0274186fd1b327d5dc3246f814aaaf, 'Optimize
symlink/directory detection' by Linus Torvalds, removed the 'char
*symcache' parameter to the has_symlink_leading_path() function. This
made all variables currently named 'symcache' inside diff-lib.c
unnecessary.
This also let us throw away the 'struct oneway_unpack_data', and
instead directly use the 'struct rev_info *revs' member, which
was the only member left after removal of the 'symcache[] array'
member. The 'struct oneway_unpack_data' was introduced by the
following commit:
948dd346 "diff-files: careful when inspecting work tree items"
Impact: cleanup
PATH_MAX bytes less memory stack usage in some cases
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If PATH_MAX on your system is smaller than a path stored, it may cause
buffer overflow and stack corruption in diff_addremove() and diff_change()
functions when running git-diff
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the base for making symlink detection in the middle fo a pathname
saner and (much) more efficient.
Under various loads, we want to verify that the full path leading up to a
filename is a real directory tree, and that when we successfully do an
'lstat()' on a filename, we don't get a false positive due to a symlink in
the middle of the path that git should have seen as a symlink, not as a
normal path component.
The 'has_symlink_leading_path()' function already did this, and cached
a single level of symlink information, but didn't cache the _lack_ of a
symlink, so the normal behaviour was actually the wrong way around, and we
ended up doing an 'lstat()' on each path component to check that it was a
real directory.
This caches the last detected full directory and symlink entries, and
speeds up especially deep directory structures a lot by avoiding to
lstat() all the directories leading up to each entry in the index.
[ This can - and should - probably be extended upon so that we eventually
never do a bare 'lstat()' on any path entries at *all* when checking the
index, but always check the full path carefully. Right now we do not
generally check the whole path for all our normal quick index
revalidation.
We should also make sure that we're careful about all the invalidation,
ie when we remove a link and replace it by a directory we should
invalidate the symlink cache if it matches (and vice versa for the
directory cache).
But regardless, the basic function needs to be sane to do that. The old
'has_symlink_leading_path()' was not capable enough - or indeed the code
readable enough - to really do that sanely. So I'm pushing this as not
just an optimization, but as a base for further work. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* py/diff-submodule:
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
|
|
* jc/lstat:
diff-files: mark an index entry we know is up-to-date as such
write_index(): optimize ce_smudge_racily_clean_entry() calls with CE_UPTODATE
|
|
The function is about checking for removed work tree item, so name it
accordingly to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
948dd34 (diff-index: careful when inspecting work tree items, 2008-03-30)
made the work tree check careful not to be fooled by a new directory that
exists at a place the index expects a blob. For such a change to be a
typechange from blob to submodule, the new directory has to be a
repository.
However, if the index expects a submodule there, we should not insist the
work tree entity to be a repository --- a simple directory that is not a
full fledged repository (even an empty directory would do) should be
considered an unmodified subproject, because that is how a superproject
with a submodule is checked out sparsely by default.
This makes the function check_work_tree_entity() even more careful not to
report a submodule that is not checked out as removed. It fixes the
recently added test in t4027.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command
git svn clone (URL of an empty SVN repo here)
works, creates an empty git repository. I can perform the initial
commit there, but then, "git svn dcommit" says :
Use of uninitialized value in concatenation (.) or string at .../git-svn line 414.
Committing to ...
Unable to determine upstream SVN information from HEAD history
I guess a correct management of the initial commit in git-svn would be
hard to implement, but at least, the error message can be improved.
First step is something like the patch below, and better would be for
"git svn clone" to warn that it won't be able to do much with the
cloned repo.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This does not make any difference when running diff-files alone, but if
you internally run run_diff_files() and then run other operations further
on the index, we do not have to run lstat(2) again on entries we already
have checked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the same breakage in diff-files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, if you changed a staged path into a directory in the work tree,
we happily ran lstat(2) on it and found that it exists, and declared that
the user changed it to a gitlink.
This is wrong for two reasons:
(1) It may be a directory, but it may not be a submodule, and in the
latter case, the change we need to report is "the blob at the path
has disappeared". We need to check with resolve_gitlink_ref() to be
consistent with what "git add" and "git update-index --add" does.
(2) lstat(2) may have succeeded only because a leading component of the
path was turned into a symbolic link that points at something that
exists in the work tree. In such a case, the path itself does not
exist anymore, as far as the index is concerned.
This fixes these breakages in diff-index that the previous patch has
exposed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When skip_unmerged option is not given, unpack_trees() should not just
skip unmerged cache entries but keep them in the result for the caller to
sort them out.
For callers other than diff-index, the incoming index should never be
unmerged, but diff-index is a special case caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jens Lehmann
Nguyễn Thái Ngọc Duy
Linus Torvalds
Stephan Beyer
Kjetil Barvik
Dmitry Potapov
Matthieu Moy