summaryrefslogtreecommitdiff
path: root/diff-lib.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-28mark_fsmonitor_valid(): mark the index as changed if neededLibravatar Johannes Schindelin1-1/+1
Without this bug fix, t7519's four "status doesn't detect unreported modifications" test cases would fail occasionally (and, oddly enough, *a lot* more frequently on Windows). The reason is that these test cases intentionally use the side effect of `git status` to re-write the index if any updates were detected: they first clean the worktree, run `git status` to update the index as well as show the output to the casual reader, then make the worktree dirty again and expect no changes to reported if running with a mocked fsmonitor hook. The problem with this strategy was that the index was written during said `git status` on the clean worktree for the *wrong* reason: not because the index was marked as changed (it wasn't), but because the recorded mtimes were racy with the index' own mtime. As the mtime granularity on Windows is 100 nanoseconds (see e.g. https://docs.microsoft.com/en-us/windows/desktop/SysInfo/file-times), the mtimes of the files are often enough *not* racy with the index', so that that `git status` call currently does not always update the index (including the fsmonitor extension), causing the test case to fail. The obvious fix: if we change *any* index entry's `CE_FSMONITOR_VALID` flag, we should also mark the index as changed. That will cause the index to be written upon `git status`, *including* an updated fsmonitor extension. Side note: Even though the reader might think that the t7519 issue should be *much* more prevalent on Linux, given that the ext4 filesystem (that seems to be used by every Linux distribution) stores mtimes in nanosecond precision. However, ext4 uses `current_kernel_time()` (see https://unix.stackexchange.com/questions/11599#comment762968_11599; it is *amazingly* hard to find any proper source of information about such ext4 questions) whose accuracy seems to depend on many factors but is safely worse than the 100-nanosecond granularity of NTFS (again, it is *horribly* hard to find anything remotely authoritative about this question). So it seems that the racy index condition that hid the bug fixed by this patch simply is a lot more likely on Linux than on Windows. But not impossible ;-) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-14diff: drop options parameter from diffcore_fix_diff_index()Libravatar Jeff King1-1/+1
The sole purpose of this function is to fix the sorting order of the queued diff entries. It doesn't need to know about any diff options, so we can drop the unused parameter. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12diff-lib.c: remove the_repository referencesLibravatar Nguyễn Thái Ngọc Duy1-3/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-19Merge branch 'nd/the-index'Libravatar Junio C Hamano1-9/+12
Various codepaths in the core-ish part learn to work on an arbitrary in-core index structure, not necessarily the default instance "the_index". * nd/the-index: (23 commits) revision.c: reduce implicit dependency the_repository revision.c: remove implicit dependency on the_index ws.c: remove implicit dependency on the_index tree-diff.c: remove implicit dependency on the_index submodule.c: remove implicit dependency on the_index line-range.c: remove implicit dependency on the_index userdiff.c: remove implicit dependency on the_index rerere.c: remove implicit dependency on the_index sha1-file.c: remove implicit dependency on the_index patch-ids.c: remove implicit dependency on the_index merge.c: remove implicit dependency on the_index merge-blobs.c: remove implicit dependency on the_index ll-merge.c: remove implicit dependency on the_index diff-lib.c: remove implicit dependency on the_index read-cache.c: remove implicit dependency on the_index diff.c: remove implicit dependency on the_index grep.c: remove implicit dependency on the_index diff.c: remove the_index dependency in textconv() functions blame.c: rename "repo" argument to "r" combine-diff.c: remove implicit dependency on the_index ...
2018-09-21revision.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21diff-lib.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-7/+10
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17Merge branch 'jk/cocci'Libravatar Junio C Hamano1-2/+2
spatch transformation to replace boolean uses of !hashcmp() to newly introduced oideq() is added, and applied, to regain performance lost due to support of multiple hash algorithms. * jk/cocci: show_dirstat: simplify same-content check read-cache: use oideq() in ce_compare functions convert hashmap comparison functions to oideq() convert "hashcmp() != 0" to "!hasheq()" convert "oidcmp() != 0" to "!oideq()" convert "hashcmp() == 0" to hasheq() convert "oidcmp() == 0" to oideq() introduce hasheq() and oideq() coccinelle: use <...> for function exclusion
2018-09-17Merge branch 'nd/unpack-trees-with-cache-tree'Libravatar Junio C Hamano1-2/+2
The unpack_trees() API used in checking out a branch and merging walks one or more trees along with the index. When the cache-tree in the index tells us that we are walking a tree whose flattened contents is known (i.e. matches a span in the index), as linearly scanning a span in the index is much more efficient than having to open tree objects recursively and listing their entries, the walk can be optimized, which is done in this topic. * nd/unpack-trees-with-cache-tree: Document update for nd/unpack-trees-with-cache-tree cache-tree: verify valid cache-tree in the test suite unpack-trees: add missing cache invalidation unpack-trees: reuse (still valid) cache-tree from src_index unpack-trees: reduce malloc in cache-tree walk unpack-trees: optimize walking same trees with cache-tree unpack-trees: add performance tracing trace.h: support nested performance tracing
2018-08-29convert "oidcmp() != 0" to "!oideq()"Libravatar Jeff King1-1/+1
This is the flip side of the previous two patches: checking for a non-zero oidcmp() can be more strictly expressed as inequality. Like those patches, we write "!= 0" in the coccinelle transformation, which covers by isomorphism the more common: if (oidcmp(E1, E2)) As with the previous two patches, this patch can be achieved almost entirely by running "make coccicheck"; the only differences are manual line-wrap fixes to match the original code. There is one thing to note for anybody replicating this, though: coccinelle 1.0.4 seems to miss the case in builtin/tag.c, even though it's basically the same as all the others. Running with 1.0.7 does catch this, so presumably it's just a coccinelle bug that was fixed in the interim. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29convert "oidcmp() == 0" to oideq()Libravatar Jeff King1-1/+1
Using the more restrictive oideq() should, in the long run, give the compiler more opportunities to optimize these callsites. For now, this conversion should be a complete noop with respect to the generated code. The result is also perhaps a little more readable, as it avoids the "zero is equal" idiom. Since it's so prevalent in C, I think seasoned programmers tend not to even notice it anymore, but it can sometimes make for awkward double negations (e.g., we can drop a few !!oidcmp() instances here). This patch was generated almost entirely by the included coccinelle patch. This mechanical conversion should be completely safe, because we check explicitly for cases where oidcmp() is compared to 0, which is what oideq() is doing under the hood. Note that we don't have to catch "!oidcmp()" separately; coccinelle's standard isomorphisms make sure the two are treated equivalently. I say "almost" because I did hand-edit the coccinelle output to fix up a few style violations (it mostly keeps the original formatting, but sometimes unwraps long lines). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-18trace.h: support nested performance tracingLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Performance measurements are listed right now as a flat list, which is fine when we measure big blocks. But when we start adding more and more measurements, some of them could be just part of a bigger measurement and a flat list gives a wrong impression that they are executed at the same level instead of nested. Add trace_performance_enter() and trace_performance_leave() to allow indent these nested measurements. For now it does not help much because the only nested thing is (lazy) name hash initialization (e.g. called in diff-index from "git status"). This will help more because I'm going to add some more tracing that's actually nested. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13dir.c: remove an implicit dependency on the_index in pathspec codeLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Make the match_patchspec API and friends take an index_state instead of assuming the_index in dir.c. All external call sites are converted blindly to keep the patch simple and retain current behavior. Individual call sites may receive further updates to use the right index instead of the_index. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-02Merge branch 'jk/has-uncommitted-changes-fix'Libravatar Junio C Hamano1-0/+3
"git pull --rebase" on a corrupt HEAD caused a segfault. In general we substitute an empty tree object when running the in-core equivalent of the diff-index command, and the codepath has been corrected to do so as well to fix this issue. * jk/has-uncommitted-changes-fix: has_uncommitted_changes(): fall back to empty tree
2018-07-11has_uncommitted_changes(): fall back to empty treeLibravatar Jeff King1-0/+3
If has_uncommitted_changes() can't resolve HEAD (e.g., because it's unborn or corrupt), then we end up calling run_diff_index() with an empty revs.pending array. This causes a segfault, as run_diff_index() blindly looks at the first pending item. Fixing this raises a question of fault: should run_diff_index() handle this case, or is the caller wrong to pass an empty pending list? Looking at the other callers of run_diff_index(), they handle this in one of three ways: - they resolve the object themselves, and avoid doing the diff if it's not valid - they resolve the object themselves, and fall back to the empty tree - they use setup_revisions(), which will die() if the object isn't valid Since this is the only broken caller, that argues that the fix should go there. Falling back to the empty tree makes sense here, as we'd claim uncommitted changes if and only if the index is non-empty. This may be a little funny in the case of corruption (the corrupt HEAD probably _isn't_ empty), but: - we don't actually know the reason here that HEAD didn't resolve (the much more likely case is that we have an unborn HEAD, in which case the empty tree comparison is the right thing) - this matches how other code, like "git diff", behaves While we're thinking about it, let's add an assertion to run_diff_index(). It should always be passed a single object, and as this bug shows, it's easy to get it wrong (and an assertion is easier to hunt down than a segfault, or a quietly ignored extra tree). Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29diff: ignore --ita-[in]visible-in-index when diffing worktree-to-treeLibravatar Nguyễn Thái Ngọc Duy1-2/+6
This option is supposed to fix the diff of "diff-files" (not reporting ita entries as new files) and "diff-index --cached <tree>" (showing ita entries as present in the index with empty content) but not "diff-index <tree>". When --ita-invisible-in-index is set on "git diff-index <tree>", unpack_trees() will eventually call oneway_diff() on the ita entry with the same code flow as "diff-index --cached <tree>". We want to ignore the ita entry for "diff-index --cached <tree>" but not "diff-index <tree>" since the latter will examine and produce a diff based on worktree entry's (real) content, not ita index entry's (empty) content. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-06Merge branch 'bw/c-plus-plus'Libravatar Junio C Hamano1-19/+19
Avoid using identifiers that clash with C++ keywords. Even though it is not a goal to compile Git with C++ compilers, changes like this help use of code analysis tools that targets C++ on our codebase. * bw/c-plus-plus: (37 commits) replace: rename 'new' variables trailer: rename 'template' variables tempfile: rename 'template' variables wrapper: rename 'template' variables environment: rename 'namespace' variables diff: rename 'template' variables environment: rename 'template' variables init-db: rename 'template' variables unpack-trees: rename 'new' variables trailer: rename 'new' variables submodule: rename 'new' variables split-index: rename 'new' variables remote: rename 'new' variables ref-filter: rename 'new' variables read-cache: rename 'new' variables line-log: rename 'new' variables imap-send: rename 'new' variables http: rename 'new' variables entry: rename 'new' variables diffcore-delta: rename 'new' variables ...
2018-02-22diff-lib: rename 'new' variableLibravatar Brandon Williams1-19/+19
Rename C++ keyword in order to bring the codebase closer to being able to be compiled with a C++ compiler. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-02trace: measure where the time is spent in the index-heavy operationsLibravatar Nguyễn Thái Ngọc Duy1-0/+4
All the known heavy code blocks are measured (except object database access). This should help identify if an optimization is effective or not. An unoptimized git-status would give something like below: 0.001791141 s: read cache ... 0.004011363 s: preload index 0.000516161 s: refresh index 0.003139257 s: git command: ... 'status' '--porcelain=2' 0.006788129 s: diff-files 0.002090267 s: diff-index 0.001885735 s: initialize name hash 0.032013138 s: read directory 0.051781209 s: git command: './git' 'status' Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-13Merge branch 'bc/hash-algo'Libravatar Junio C Hamano1-1/+1
An infrastructure to define what hash function is used in Git is introduced, and an effort to plumb that throughout various codepaths has been started. * bc/hash-algo: repository: fix a sparse 'using integer as NULL pointer' warning Switch empty tree and blob lookups to use hash abstraction Integrate hash algorithm support with repo setup Add structure representing hash algorithm setup: expose enumerated repo info
2017-11-21Merge branch 'bp/fsmonitor'Libravatar Junio C Hamano1-0/+2
We learned to talk to watchman to speed up "git status" and other operations that need to see which paths have been modified. * bp/fsmonitor: fsmonitor: preserve utf8 filenames in fsmonitor-watchman log fsmonitor: read entirety of watchman output fsmonitor: MINGW support for watchman integration fsmonitor: add a performance test fsmonitor: add a sample integration script for Watchman fsmonitor: add test cases for fsmonitor extension split-index: disable the fsmonitor extension when running the split index test fsmonitor: add a test tool to dump the index extension update-index: add fsmonitor support to update-index ls-files: Add support in ls-files to display the fsmonitor valid bit fsmonitor: add documentation for the fsmonitor extension. fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files. update-index: add a new --force-write-index option preload-index: add override to enable testing preload-index bswap: add 64 bit endianness helper get_be64
2017-11-13Switch empty tree and blob lookups to use hash abstractionLibravatar brian m. carlson1-1/+1
Switch the uses of empty_tree_oid and empty_blob_oid to use the current_hash abstraction that represents the current hash algorithm in use. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-09Merge branch 'bw/diff-opt-impl-to-bitfields'Libravatar Junio C Hamano1-14/+16
A single-word "unsigned flags" in the diff options is being split into a structure with many bitfields. * bw/diff-opt-impl-to-bitfields: diff: make struct diff_flags members lowercase diff: remove DIFF_OPT_CLR macro diff: remove DIFF_OPT_SET macro diff: remove DIFF_OPT_TST macro diff: remove touched flags diff: add flag to indicate textconv was set via cmdline diff: convert flags to be stored in bitfields add, reset: use DIFF_OPT_SET macro to set a diff flag
2017-11-01diff: make struct diff_flags members lowercaseLibravatar Brandon Williams1-11/+11
Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_SET macroLibravatar Brandon Williams1-2/+2
Remove the `DIFF_OPT_SET` macro and instead set the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_SET(&E, fld) + E.flags.fld = 1 @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_SET(ptr, fld) + ptr->flags.fld = 1 Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: remove DIFF_OPT_TST macroLibravatar Brandon Williams1-9/+10
Remove the `DIFF_OPT_TST` macro and instead access the flags directly. This conversion is done using the following semantic patch: @@ expression E; identifier fld; @@ - DIFF_OPT_TST(&E, fld) + E.flags.fld @@ type T; T *ptr; identifier fld; @@ - DIFF_OPT_TST(ptr, fld) + ptr->flags.fld Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01diff: convert flags to be stored in bitfieldsLibravatar Brandon Williams1-3/+4
We cannot add many more flags to the diff machinery due to the limitations of the number of flags that can be stored in a single unsigned int. In order to allow for more flags to be added to the diff machinery in the future this patch converts the flags to be stored in bitfields in 'struct diff_flags'. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: convert resolve_gitlink_ref to struct object_idLibravatar brian m. carlson1-1/+1
Convert the declaration and definition of resolve_gitlink_ref to use struct object_id and apply the following semantic patch: @@ expression E1, E2, E3; @@ - resolve_gitlink_ref(E1, E2, E3.hash) + resolve_gitlink_ref(E1, E2, &E3) @@ expression E1, E2, E3; @@ - resolve_gitlink_ref(E1, E2, E3->hash) + resolve_gitlink_ref(E1, E2, E3) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16Convert remaining callers of resolve_gitlink_ref to object_idLibravatar brian m. carlson1-2/+2
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-01fsmonitor: teach git to optionally utilize a file system monitor to speed up ↵Libravatar Ben Peart1-0/+2
detecting new or changed files. When the index is read from disk, the fsmonitor index extension is used to flag the last known potentially dirty index entries. The registered core.fsmonitor command is called with the time the index was last updated and returns the list of files changed since that time. This list is used to flag any additional dirty cache entries and untracked cache directories. We can then use this valid state to speed up preload_index(), ie_match_stat(), and refresh_cache_ent() as they do not need to lstat() files to detect potential changes for those entries marked CE_FSMONITOR_VALID. In addition, if the untracked cache is turned on valid_cached_dir() can skip checking directories for new or changed files as fsmonitor will invalidate the cache only for those directories that have been identified as having potential changes. To keep the CE_FSMONITOR_VALID state accurate during git operations; when git updates a cache entry to match the current state on disk, it will now set the CE_FSMONITOR_VALID bit. Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit is cleared and the corresponding untracked cache directory is marked invalid. Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-24object_array: use `object_array_clear()`, not `free()`Libravatar Martin Ågren1-2/+1
Instead of freeing `foo.objects` for an object array `foo` (sometimes conditionally), call `object_array_clear(&foo)`. This means we don't poke as much into the implementation, which is already a good thing, but also that we release the individual entries as well, thereby fixing at least one memory-leak (in diff-lib.c). If someone is holding on to a pointer to an element's `name` or `path`, that is now a dangling pointer, i.e., we'd be turning an unpleasant situation into an outright bug. To the best of my understanding no such long-term pointers are being taken. The way we handle `study` in builting/reflog.c still looks like it might leak. That will be addressed in the next commit. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'ab/free-and-null'Libravatar Junio C Hamano1-2/+1
A common pattern to free a piece of memory and assign NULL to the pointer that used to point at it has been replaced with a new FREE_AND_NULL() macro. * ab/free-and-null: *.[ch] refactoring: make use of the FREE_AND_NULL() macro coccinelle: make use of the "expression" FREE_AND_NULL() rule coccinelle: add a rule to make "expression" code use FREE_AND_NULL() coccinelle: make use of the "type" FREE_AND_NULL() rule coccinelle: add a rule to make "type" code use FREE_AND_NULL() git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-19Merge branch 'bw/object-id'Libravatar Junio C Hamano1-26/+26
Conversion from uchar[20] to struct object_id continues. * bw/object-id: (33 commits) diff: rename diff_fill_sha1_info to diff_fill_oid_info diffcore-rename: use is_empty_blob_oid tree-diff: convert path_appendnew to object_id tree-diff: convert diff_tree_paths to struct object_id tree-diff: convert try_to_follow_renames to struct object_id builtin/diff-tree: cleanup references to sha1 diff-tree: convert diff_tree_sha1 to struct object_id notes-merge: convert write_note_to_worktree to struct object_id notes-merge: convert verify_notes_filepair to struct object_id notes-merge: convert find_notes_merge_pair_ps to struct object_id notes-merge: convert merge_from_diffs to struct object_id notes-merge: convert notes_merge* to struct object_id tree-diff: convert diff_root_tree_sha1 to struct object_id combine-diff: convert find_paths_* to struct object_id combine-diff: convert diff_tree_combined to struct object_id diff: convert diff_flush_patch_id to struct object_id patch-ids: convert to struct object_id diff: finish conversion for prepare_temp_file to struct object_id diff: convert reuse_worktree_file to struct object_id diff: convert fill_filespec to struct object_id ...
2017-06-16coccinelle: make use of the "type" FREE_AND_NULL() ruleLibravatar Ævar Arnfjörð Bjarmason1-2/+1
Apply the result of the just-added coccinelle rule. This manually excludes a few occurrences, mostly things that resulted in many FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent change. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-13Merge branch 'jc/noent-notdir'Libravatar Junio C Hamano1-1/+1
Our code often opens a path to an optional file, to work on its contents when we can successfully open it. We can ignore a failure to open if such an optional file does not exist, but we do want to report a failure in opening for other reasons (e.g. we got an I/O error, or the file is there, but we lack the permission to open). The exact errors we need to ignore are ENOENT (obviously) and ENOTDIR (less obvious). Instead of repeating comparison of errno with these two constants, introduce a helper function to do so. * jc/noent-notdir: treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked compat-util: is_missing_file_error()
2017-06-02diff: convert fill_filespec to struct object_idLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_change to struct object_idLibravatar Brandon Williams1-2/+2
Convert diff_change to take a struct object_id. In addition convert the function pointer type 'change_fn_t' to also take a struct object_id. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert run_diff_files to struct object_idLibravatar Brandon Williams1-6/+6
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_addremove to struct object_idLibravatar Brandon Williams1-3/+3
Convert diff_addremove to take a struct object_id. In addtion convert the function pointer type 'add_remove_fn_t' to also take a struct object_id. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert diff_index_show_file to struct object_idLibravatar Brandon Williams1-5/+5
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02diff: convert get_stat_data to struct object_idLibravatar Brandon Williams1-13/+13
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-30treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checkedLibravatar Junio C Hamano1-1/+1
Using the is_missing_file_error() helper introduced in the previous step, update all hits from $ git grep -e ENOENT --and -e ENOTDIR There are codepaths that only check ENOENT, and it is possible that some of them should be checking both. Updating them is kept out of this step deliberately, as we do not want to change behaviour in this step. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08tree: convert parse_tree_indirect to struct object_idLibravatar brian m. carlson1-1/+1
Convert parse_tree_indirect to take a pointer to struct object_id. Update all the callers. This transformation was achieved using the following semantic patch and manual updates to the declaration and definition. Update builtin/checkout.c manually as well, since it uses a ternary expression not handled by the semantic patch. @@ expression E1; @@ - parse_tree_indirect(E1.hash) + parse_tree_indirect(&E1) @@ expression E1; @@ - parse_tree_indirect(E1->hash) + parse_tree_indirect(E1) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08diff-lib: convert do_diff_cache to struct object_idLibravatar brian m. carlson1-6/+6
This is needed to convert parse_tree_indirect. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-24commit: fix empty commit creation when there's no changes but ita entriesLibravatar Nguyễn Thái Ngọc Duy1-1/+3
If i-t-a entries are present and there is no change between the index and HEAD i-t-a entries, index_differs_from() still returns "dirty, new entries" (aka, the resulting commit is not empty), but cache-tree will skip i-t-a entries and produce the exact same tree of current commit. index_differs_from() is supposed to catch this so we can abort git-commit (unless --no-empty is specified). Update it to optionally ignore i-t-a entries when doing a diff between the index and HEAD so that it would return "no change" in this case and abort commit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-24diff-lib: allow ita entries treated as "not yet exist in index"Libravatar Nguyễn Thái Ngọc Duy1-0/+14
When comparing the index and the working tree to show which paths are new, and comparing the tree recorded in the HEAD and the index to see if committing the contents recorded in the index would result in an empty commit, we would want the former comparison to say "these are new paths" and the latter to say "there is no change" for paths that are marked as intent-to-add. We made a similar attempt at d95d728a ("diff-lib.c: adjust position of i-t-a entries in diff", 2015-03-16), which redefined the semantics of these two comparison modes globally, which was a disaster and had to be reverted at 78cc1a54 ("Revert "diff-lib.c: adjust position of i-t-a entries in diff"", 2015-06-23). To make sure we do not repeat the same mistake, introduce a new internal diffopt option so that this different semantics can be asked for only by callers that ask it, while making sure other unaudited callers will get the same comparison result. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07cache: convert struct cache_entry to use struct object_idLibravatar brian m. carlson1-13/+18
Convert struct cache_entry to use struct object_id by applying the following semantic patch and the object_id transforms from contrib, plus the actual change to the struct: @@ struct cache_entry E1; @@ - E1.sha1 + E1.oid.hash @@ struct cache_entry *E1; @@ - E1->sha1 + E1->oid.hash Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-20Remove get_object_hash.Libravatar brian m. carlson1-1/+1
Convert all instances of get_object_hash to use an appropriate reference to the hash member of the oid member of struct object. This provides no functional change, as it is essentially a macro substitution. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20Add several uses of get_object_hash.Libravatar brian m. carlson1-1/+1
Convert most instances where the sha1 member of struct object is dereferenced to use get_object_hash. Most instances that are passed to functions that have versions taking struct object_id, such as get_sha1_hex/get_oid_hex, or instances that can be trivially converted to use struct object_id instead, are not converted. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Jeff King <peff@peff.net>
2015-06-25Merge branch 'nd/diff-i-t-a'Libravatar Junio C Hamano1-12/+0
* nd/diff-i-t-a: Revert "diff-lib.c: adjust position of i-t-a entries in diff"
2015-06-23Revert "diff-lib.c: adjust position of i-t-a entries in diff"Libravatar Junio C Hamano1-12/+0
This reverts commit d95d728aba06a34394d15466045cbdabdada58a2. It turns out that many other commands that need to interact with the result of running diff-files and diff-index, e.g. "git apply", "git rm", etc., need to be adjusted to the new world order it brings in. For example, it would break this sequence to correct a whitespace breakage in the parts you changed: git add -N file git diff --cached file | git apply --cached --whitespace=fix git checkout file In the old world order, "diff" showed a patch to modify an existing empty file by adding its full contents, and "apply" updated the index by modifying the existing empty blob (which is what an Intent-to-Add entry records in the index) with that patch. In the new world order, "diff" shows a patch to create a new file with its full contents, but because "apply" thinks that the i-t-a entry already exists in the index, it refused to accept a creation. Adjusting "apply" to this new world order is easy, but we need to assess the extent of the damage to the rest of the system the new world order brought in before going forward and adjust them all, after which we can resurrect the commit being reverted here. Signed-off-by: Junio C Hamano <gitster@pobox.com>