summaryrefslogtreecommitdiff
path: root/daemon.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-10Fix spelling errors in code commentsLibravatar Elijah Newren1-2/+2
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-25Merge branch 'lw/daemon-log-destination'Libravatar Junio C Hamano1-1/+1
Recent introduction of "--log-destination" option to "git daemon" did not work well when the daemon was run under "--inetd" mode. * lw/daemon-log-destination: daemon.c: fix condition for redirecting stderr
2018-04-09daemon.c: fix condition for redirecting stderrLibravatar Lucas Werkmeister1-1/+1
Since the --log-destination option was added in 0c591cacb ("daemon: add --log-destination=(stderr|syslog|none)", 2018-02-04) with the explicit goal of allowing logging to stderr when running in inetd mode, we should not always redirect stderr to /dev/null in inetd mode, but rather only when stderr is not being used for logging. Signed-off-by: Lucas Werkmeister <mail@lucaswerkmeister.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-21Merge branch 'lw/daemon-log-destination'Libravatar Junio C Hamano1-7/+39
The log from "git daemon" can be redirected with a new option; one relevant use case is to send the log to standard error (instead of syslog) when running it from inetd. * lw/daemon-log-destination: daemon: add --log-destination=(stderr|syslog|none)
2018-02-05daemon: add --log-destination=(stderr|syslog|none)Libravatar Lucas Werkmeister1-7/+39
This new option can be used to override the implicit --syslog of --inetd, or to disable all logging. (While --detach also implies --syslog, --log-destination=stderr with --detach is useless since --detach disassociates the process from the original stderr.) --syslog is retained as an alias for --log-destination=syslog. --log-destination always overrides implicit --syslog regardless of option order. This is different than the “last one wins” logic that applies to some implicit options elsewhere in Git, but should hopefully be less confusing. (I also don’t know if *all* implicit options in Git follow “last one wins”.) The combination of --inetd with --log-destination=stderr is useful, for instance, when running `git daemon` as an instanced systemd service (with associated socket unit). In this case, log messages sent via syslog are received by the journal daemon, but run the risk of being processed at a time when the `git daemon` process has already exited (especially if the process was very short-lived, e.g. due to client error), so that the journal daemon can no longer read its cgroup and attach the message to the correct systemd unit (see systemd/systemd#2913 [1]). Logging to stderr instead can solve this problem, because systemd can connect stderr directly to the journal daemon, which then already knows which unit is associated with this stream. [1]: https://github.com/systemd/systemd/issues/2913 Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Lucas Werkmeister <mail@lucaswerkmeister.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-25daemon: fix length computation in newline strippingLibravatar Jeff King1-4/+2
When git-daemon gets a pktline request, we strip off any trailing newline, replacing it with a NUL. Clients prior to 5ad312bede (in git v1.4.0) would send: git-upload-pack repo.git\n and we need to strip it off to understand their request. After 5ad312bede, we send the host attribute but no newline, like: git-upload-pack repo.git\0host=example.com\0 Both of these are parsed correctly by git-daemon. But if some client were to combine the two: git-upload-pack repo.git\n\0host=example.com\0 we don't parse it correctly. The problem is that we use the "len" variable to record the position of the NUL separator, but then decrement it when we strip the newline. So we start with: git-upload-pack repo.git\n\0host=example.com\0 ^-- len and end up with: git-upload-pack repo.git\0\0host=example.com\0 ^-- len This is arguably correct, since "len" tells us the length of the initial string, but we don't actually use it for that. What we do use it for is finding the offset of the extended attributes; they used to be at len+1, but are now at len+2. We can solve that by just leaving "len" where it is. We don't have to care about the length of the shortened string, since we just treat it like a C string. No version of Git ever produced such a string, but it seems like the daemon code meant to handle this case (and it seems like a reasonable thing for somebody to do in a 3rd-party implementation). Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-25daemon: handle NULs in extended attribute stringLibravatar Jeff King1-5/+4
If we receive a request with extended attributes after the NUL, we try to write those attributes to the log. We do so with a "%s" format specifier, which will only show characters up to the first NUL. That's enough for printing a "host=" specifier. But since dfe422d04d (daemon: recognize hidden request arguments, 2017-10-16) we may have another NUL, followed by protocol parameters, and those are not logged at all. Let's cut out the attempt to show the whole string, and instead log when we parse individual attributes. We could leave the "extended attributes (%d bytes) exist" part of the log, which in theory could alert us to attributes that fail to parse. But anything we don't parse as a "host=" parameter gets blindly added to the "protocol" attribute, so we'd see it in that part of the log. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-25daemon: fix off-by-one in logging extended attributesLibravatar Jeff King1-2/+2
If receive a request like: git-upload-pack /foo.git\0host=localhost we mark the offset of the NUL byte as "len", and then log the bytes after the NUL with a "%.*s" placeholder, using "pktlen - len" as the length, and "line + len + 1" as the start of the string. This is off-by-one, since the start of the string skips past the separating NUL byte, but the adjusted length includes it. Fortunately this doesn't actually read past the end of the buffer, since "%.*s" will stop when it hits a NUL. And regardless of what is in the buffer, packet_read() will always add an extra NUL terminator for safety. As an aside, the git.git client sends an extra NUL after a "host" field, too, so we'd generally hit that one first, not the one added by packet_read(). You can see this in the test output which reports 15 bytes, even though the string has only 14 bytes of visible data. But the point is that even a client sending unusual data could not get us to read past the end of the buffer, so this is purely a cosmetic fix. Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-17daemon: recognize hidden request argumentsLibravatar Brandon Williams1-9/+62
A normal request to git-daemon is structured as "command path/to/repo\0host=..\0" and due to a bug introduced in 49ba83fb6 (Add virtualization support to git-daemon, 2006-09-19) we aren't able to place any extra arguments (separated by NULs) besides the host otherwise the parsing of those arguments would enter an infinite loop. This bug was fixed in 73bb33a94 (daemon: Strictly parse the "extra arg" part of the command, 2009-06-04) but a check was put in place to disallow extra arguments so that new clients wouldn't trigger this bug in older servers. In order to get around this limitation teach git-daemon to recognize additional request arguments hidden behind a second NUL byte. Requests can then be structured like: "command path/to/repo\0host=..\0\0version=1\0key=value\0". git-daemon can then parse out the extra arguments and set 'GIT_PROTOCOL' accordingly. By placing these extra arguments behind a second NUL byte we can skirt around both the infinite loop bug in 49ba83fb6 (Add virtualization support to git-daemon, 2006-09-19) as well as the explicit disallowing of extra arguments introduced in 73bb33a94 (daemon: Strictly parse the "extra arg" part of the command, 2009-06-04) because both of these versions of git-daemon check for a single NUL byte after the host argument before terminating the argument parsing. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-23Merge branch 'dt/xgethostname-nul-termination'Libravatar Junio C Hamano1-4/+0
gethostname(2) may not NUL terminate the buffer if hostname does not fit; unfortunately there is no easy way to see if our buffer was too small, but at least this will make sure we will not end up using garbage past the end of the buffer. * dt/xgethostname-nul-termination: xgethostname: handle long hostnames use HOST_NAME_MAX to size buffers for gethostname(2)
2017-04-18use HOST_NAME_MAX to size buffers for gethostname(2)Libravatar René Scharfe1-4/+0
POSIX limits the length of host names to HOST_NAME_MAX. Export the fallback definition from daemon.c and use this constant to make all buffers used with gethostname(2) big enough for any possible result and a terminating NUL. Inspired-by: David Turner <dturner@twosigma.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: David Turner <dturner@twosigma.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-30daemon: use an argv_array to exec childrenLibravatar Jeff King1-21/+17
Our struct child_process already has its own argv_array. Let's use that to avoid having to format options into separate buffers. Note that we'll need to declare the child process outside of the run_service_command() helper to do this. But that opens up a further simplification, which is that the helper can append to our argument list, saving each caller from specifying "." manually. Signed-off-by: Jeff King <peff@peff.net>
2016-11-29Merge branch 'jk/daemon-path-ok-check-truncation' into maintLibravatar Junio C Hamano1-4/+21
"git daemon" used fixed-length buffers to turn URL to the repository the client asked for into the server side directory path, using snprintf() to avoid overflowing these buffers, but allowed possibly truncated paths to the directory. This has been tightened to reject such a request that causes overlong path to be required to serve. * jk/daemon-path-ok-check-truncation: daemon: detect and reject too-long paths
2016-10-31Merge branch 'ls/filter-process'Libravatar Junio C Hamano1-1/+1
The smudge/clean filter API expect an external process is spawned to filter the contents for each path that has a filter defined. A new type of "process" filter API has been added to allow the first request to run the filter for a path to spawn a single process, and all filtering need is served by this single process for multiple paths, reducing the process creation overhead. * ls/filter-process: contrib/long-running-filter: add long running filter example convert: add filter.<driver>.process option convert: prepare filter.<driver>.process option convert: make apply_filter() adhere to standard Git error handling pkt-line: add functions to read/write flush terminated packet streams pkt-line: add packet_write_gently() pkt-line: add packet_flush_gently() pkt-line: add packet_write_fmt_gently() pkt-line: extract set_packet_header() pkt-line: rename packet_write() to packet_write_fmt() run-command: add clean_on_exit_handler run-command: move check_pipe() from write_or_die to run_command convert: modernize tests convert: quote filter names in error messages
2016-10-27Merge branch 'jk/daemon-path-ok-check-truncation'Libravatar Junio C Hamano1-4/+21
"git daemon" used fixed-length buffers to turn URL to the repository the client asked for into the server side directory path, using snprintf() to avoid overflowing these buffers, but allowed possibly truncated paths to the directory. This has been tightened to reject such a request that causes overlong path to be required to serve. * jk/daemon-path-ok-check-truncation: daemon: detect and reject too-long paths
2016-10-24daemon: detect and reject too-long pathsLibravatar Jeff King1-4/+21
When we are checking the path via path_ok(), we use some fixed PATH_MAX buffers. We write into them via snprintf(), so there's no possibility of overflow, but it does mean we may silently truncate the path, leading to potentially confusing errors when the partial path does not exist. We're better off to reject the path explicitly. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-17pkt-line: rename packet_write() to packet_write_fmt()Libravatar Lars Schneider1-1/+1
packet_write() should be called packet_write_fmt() because it is a printf-like function that takes a format string as first parameter. packet_write_fmt() should be used for text strings only. Arbitrary binary data should use a new packet_write() function that is introduced in a subsequent patch. Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-08Merge branch 'jk/common-main' into maintLibravatar Junio C Hamano1-11/+5
There are certain house-keeping tasks that need to be performed at the very beginning of any Git program, and programs that are not built-in commands had to do them exactly the same way as "git" potty does. It was easy to make mistakes in one-off standalone programs (like test helpers). A common "main()" function that calls cmd_main() of individual program has been introduced to make it harder to make mistakes. * jk/common-main: mingw: declare main()'s argv as const common-main: call git_setup_gettext() common-main: call restore_sigpipe_to_default() common-main: call sanitize_stdfds() common-main: call git_extract_argv0_path() add an extra level of indirection to main()
2016-07-28Merge branch 'ew/daemon-socket-keepalive'Libravatar Junio C Hamano1-3/+5
Recent update to "git daemon" tries to enable the socket-level KEEPALIVE, but when it is spawned via inetd, the standard input file descriptor may not necessarily be connected to a socket. Suppress an ENOTSOCK error from setsockopt(). * ew/daemon-socket-keepalive: Windows: add missing definition of ENOTSOCK daemon: ignore ENOTSOCK from setsockopt
2016-07-19Merge branch 'jk/common-main'Libravatar Junio C Hamano1-11/+5
There are certain house-keeping tasks that need to be performed at the very beginning of any Git program, and programs that are not built-in commands had to do them exactly the same way as "git" potty does. It was easy to make mistakes in one-off standalone programs (like test helpers). A common "main()" function that calls cmd_main() of individual program has been introduced to make it harder to make mistakes. * jk/common-main: mingw: declare main()'s argv as const common-main: call git_setup_gettext() common-main: call restore_sigpipe_to_default() common-main: call sanitize_stdfds() common-main: call git_extract_argv0_path() add an extra level of indirection to main()
2016-07-18daemon: ignore ENOTSOCK from setsockoptLibravatar Eric Wong1-3/+5
In inetd mode, we are not guaranteed stdin or stdout is a socket; callers could filter the data through a pipe or be testing with regular files. This prevents t5802 from polluting syslog. Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01common-main: call git_setup_gettext()Libravatar Jeff King1-2/+0
This should be part of every program, as otherwise users do not get translated error messages. However, some external commands forgot to do so (e.g., git-credential-store). This fixes them, and eliminates the repeated code in programs that did remember to use it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01common-main: call sanitize_stdfds()Libravatar Jeff King1-2/+1
This is setup that should be done in every program for safety, but we never got around to adding it everywhere (so builtins benefited from the call in git.c, but any external commands did not). Putting it in the common main() gives us this safety everywhere. Note that the case in daemon.c is a little funny. We wait until we know whether we want to daemonize, and then either: - call daemonize(), which will close stdio and reopen it to /dev/null under the hood - sanitize_stdfds(), to fix up any odd cases But that is way too late; the point of sanitizing is to give us reliable descriptors on 0/1/2, and we will already have executed code, possibly called die(), etc. The sanitizing should be the very first thing that happens. With this patch, git-daemon will sanitize first, and can remove the call in the non-daemonize case. It does mean that daemonize() may just end up closing the descriptors we opened, but that's not a big deal (it's not wrong to do so, nor is it really less optimal than the case where our parent process redirected us from /dev/null ahead of time). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01common-main: call git_extract_argv0_path()Libravatar Jeff King1-3/+0
Every program which links against libgit.a must call this function, or risk hitting an assert() in system_path() that checks whether we have configured argv0_path (though only when RUNTIME_PREFIX is defined, so essentially only on Windows). Looking at the diff, you can see that putting it into the common main() saves us having to do it individually in each of the external commands. But what you can't see are the cases where we _should_ have been doing so, but weren't (e.g., git-credential-store, and all of the t/helper test programs). This has been an accident-waiting-to-happen for a long time, but wasn't triggered until recently because it involves one of those programs actually calling system_path(). That happened with git-credential-store in v2.8.0 with ae5f677 (lazily load core.sharedrepository, 2016-03-11). The program: - takes a lock file, which... - opens a tempfile, which... - calls adjust_shared_perm to fix permissions, which... - lazy-loads the config (as of ae5f677), which... - calls system_path() to find the location of /etc/gitconfig On systems with RUNTIME_PREFIX, this means credential-store reliably hits that assert() and cannot be used. We never noticed in the test suite, because we set GIT_CONFIG_NOSYSTEM there, which skips the system_path() lookup entirely. But if we were to tweak git_config() to find /etc/gitconfig even when we aren't going to open it, then the test suite shows multiple failures (for credential-store, and for some other test helpers). I didn't include that tweak here because it's way too specific to this particular call to be worth carrying around what is essentially dead code. The implementation is fairly straightforward, with one exception: there is exactly one caller (git.c) that actually cares about the result of the function, and not the side-effect of setting up argv0_path. We can accommodate that by simply replacing the value of argv[0] in the array we hand down to cmd_main(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01add an extra level of indirection to main()Libravatar Jeff King1-4/+4
There are certain startup tasks that we expect every git process to do. In some cases this is just to improve the quality of the program (e.g., setting up gettext()). In others it is a requirement for using certain functions in libgit.a (e.g., system_path() expects that you have called git_extract_argv0_path()). Most commands are builtins and are covered by the git.c version of main(). However, there are still a few external commands that use their own main(). Each of these has to remember to include the correct startup sequence, and we are not always consistent. Rather than just fix the inconsistencies, let's make this harder to get wrong by providing a common main() that can run this standard startup. We basically have two options to do this: - the compat/mingw.h file already does something like this by adding a #define that replaces the definition of main with a wrapper that calls mingw_startup(). The upside is that the code in each program doesn't need to be changed at all; it's rewritten on the fly by the preprocessor. The downside is that it may make debugging of the startup sequence a bit more confusing, as the preprocessor is quietly inserting new code. - the builtin functions are all of the form cmd_foo(), and git.c's main() calls them. This is much more explicit, which may make things more obvious to somebody reading the code. It's also more flexible (because of course we have to figure out _which_ cmd_foo() to call). The downside is that each of the builtins must define cmd_foo(), instead of just main(). This patch chooses the latter option, preferring the more explicit approach, even though it is more invasive. We introduce a new file common-main.c, with the "real" main. It expects to call cmd_main() from whatever other objects it is linked against. We link common-main.o against anything that links against libgit.a, since we know that such programs will need to do this setup. Note that common-main.o can't actually go inside libgit.a, as the linker would not pick up its main() function automatically (it has no callers). The rest of the patch is just adjusting all of the various external programs (mostly in t/helper) to use cmd_main(). I've provided a global declaration for cmd_main(), which means that all of the programs also need to match its signature. In particular, many functions need to switch to "const char **" instead of "char **" for argv. This effect ripples out to a few other variables and functions, as well. This makes the patch even more invasive, but the end result is much better. We should be treating argv strings as const anyway, and now all programs conform to the same signature (which also matches the way builtins are defined). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-25daemon: enable SO_KEEPALIVE for all socketsLibravatar Eric Wong1-0/+14
While --init-timeout and --timeout options exist and I've never run git-daemon without them, some users may forget to set them and encounter hung daemon processes when connections fail. Enable socket-level timeouts so the kernel can send keepalive probes as necessary to detect failed connections. Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-26Merge branch 'jk/tighten-alloc'Libravatar Junio C Hamano1-7/+5
Update various codepaths to avoid manually-counted malloc(). * jk/tighten-alloc: (22 commits) ewah: convert to REALLOC_ARRAY, etc convert ewah/bitmap code to use xmalloc diff_populate_gitlink: use a strbuf transport_anonymize_url: use xstrfmt git-compat-util: drop mempcpy compat code sequencer: simplify memory allocation of get_message test-path-utils: fix normalize_path_copy output buffer size fetch-pack: simplify add_sought_entry fast-import: simplify allocation in start_packfile write_untracked_extension: use FLEX_ALLOC helper prepare_{git,shell}_cmd: use argv_array use st_add and st_mult for allocation size computation convert trivial cases to FLEX_ARRAY macros use xmallocz to avoid size arithmetic convert trivial cases to ALLOC_ARRAY convert manual allocations to argv_array argv-array: add detach function add helpers for allocating flex-array structs harden REALLOC_ARRAY and xcalloc against size_t overflow tree-diff: catch integer overflow in combine_diff_path allocation ...
2016-02-22convert manual allocations to argv_arrayLibravatar Jeff King1-7/+5
There are many manual argv allocations that predate the argv_array API. Switching to that API brings a few advantages: 1. We no longer have to manually compute the correct final array size (so it's one less thing we can screw up). 2. In many cases we had to make a separate pass to count, then allocate, then fill in the array. Now we can do it in one pass, making the code shorter and easier to follow. 3. argv_array handles memory ownership for us, making it more obvious when things should be free()d and and when not. Most of these cases are pretty straightforward. In some, we switch from "run_command_v" to "run_command" which lets us directly use the argv_array embedded in "struct child_process". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-15strbuf: introduce strbuf_getline_{lf,nul}()Libravatar Junio C Hamano1-1/+1
The strbuf_getline() interface allows a byte other than LF or NUL as the line terminator, but this is only because I wrote these codepaths anticipating that there might be a value other than NUL and LF that could be useful when I introduced line_termination long time ago. No useful caller that uses other value has emerged. By now, it is clear that the interface is overly broad without a good reason. Many codepaths have hardcoded preference to read either LF terminated or NUL terminated records from their input, and then call strbuf_getline() with LF or NUL as the third parameter. This step introduces two thin wrappers around strbuf_getline(), namely, strbuf_getline_lf() and strbuf_getline_nul(), and mechanically rewrites these call sites to call either one of them. The changes contained in this patch are: * introduction of these two functions in strbuf.[ch] * mechanical conversion of all callers to strbuf_getline() with either '\n' or '\0' as the third parameter to instead call the respective thin wrapper. After this step, output from "git grep 'strbuf_getline('" would become a lot smaller. An interim goal of this series is to make this an empty set, so that we can have strbuf_getline_crlf() take over the shorter name strbuf_getline(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-03Merge branch 'rs/daemon-plug-child-leak'Libravatar Junio C Hamano1-0/+1
"git daemon" uses "run_command()" without "finish_command()", so it needs to release resources itself, which it forgot to do. * rs/daemon-plug-child-leak: daemon: plug memory leak run-command: factor out child_process_clear()
2015-11-02daemon: plug memory leakLibravatar René Scharfe1-0/+1
Call child_process_clear() when a child ends to release the memory allocated for its environment. This is necessary because unlike all other users of start_command() we don't call finish_command(), which would have taken care of that for us. This leak was introduced by f063d38b (daemon: use cld->env_array when re-spawning). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-05daemon: use cld->env_array when re-spawningLibravatar Jeff King1-16/+10
This avoids an ugly strcat into a fixed-size buffer. It's not wrong (the buffer is plenty large enough for an IPv6 address plus some minor formatting), but it takes some effort to verify that. Unfortunately we are still stuck with some fixed-size buffers to hold the output of inet_ntop. But at least we now pass very easy-to-verify parameters, rather than doing a manual computation to account for other data in the buffer. As a side effect, this also fixes the case where we might pass an uninitialized portbuf buffer through the environment. This probably couldn't happen in practice, as it would mean that addr->sa_family was neither AF_INET nor AF_INET6 (and that is all we are listening on). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25convert trivial sprintf / strcpy calls to xsnprintfLibravatar Jeff King1-2/+2
We sometimes sprintf into fixed-size buffers when we know that the buffer is large enough to fit the input (either because it's a constant, or because it's numeric input that is bounded in size). Likewise with strcpy of constant strings. However, these sites make it hard to audit sprintf and strcpy calls for buffer overflows, as a reader has to cross-reference the size of the array with the input. Let's use xsnprintf instead, which communicates to a reader that we don't expect this to overflow (and catches the mistake in case we do). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-25write_file(): drop caller-supplied LF from calls to create a one-liner fileLibravatar Junio C Hamano1-1/+1
All of the callsites covered by this change call write_file() or write_file_gently() to create a one-liner file. Drop the caller supplied LF and let these callees to append it as necessary. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-24write_file(): drop "fatal" parameterLibravatar Junio C Hamano1-1/+1
All callers except three passed 1 for the "fatal" parameter to ask this function to die upon error, but to a casual reader of the code, it was not all obvious what that 1 meant. Instead, split the function into two based on a common write_file_v() that takes the flag, introduce write_file_gently() as a new way to attempt creating a file without dying on error, and make three callers to call it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-11Merge branch 'jc/daemon-no-ipv6-for-2.4.1'Libravatar Junio C Hamano1-1/+1
"git daemon" fails to build from the source under NO_IPV6 configuration (regression in 2.4). * jc/daemon-no-ipv6-for-2.4.1: daemon: unbreak NO_IPV6 build regression
2015-05-11Merge branch 'nd/multiple-work-trees'Libravatar Junio C Hamano1-10/+1
A replacement for contrib/workdir/git-new-workdir that does not rely on symbolic links and make sharing of objects and refs safer by making the borrowee and borrowers aware of each other. * nd/multiple-work-trees: (41 commits) prune --worktrees: fix expire vs worktree existence condition t1501: fix test with split index t2026: fix broken &&-chain t2026 needs procondition SANITY git-checkout.txt: a note about multiple checkout support for submodules checkout: add --ignore-other-wortrees checkout: pass whole struct to parse_branchname_arg instead of individual flags git-common-dir: make "modules/" per-working-directory directory checkout: do not fail if target is an empty directory t2025: add a test to make sure grafts is working from a linked checkout checkout: don't require a work tree when checking out into a new one git_path(): keep "info/sparse-checkout" per work-tree count-objects: report unused files in $GIT_DIR/worktrees/... gc: support prune --worktrees gc: factor out gc.pruneexpire parsing code gc: style change -- no SP before closing parenthesis checkout: clean up half-prepared directories in --to mode checkout: reject if the branch is already checked out elsewhere prune: strategies for linked checkouts checkout: support checking out into a new working directory ...
2015-05-05daemon: unbreak NO_IPV6 build regressionLibravatar Junio C Hamano1-1/+1
When 01cec54e (daemon: deglobalize hostname information, 2015-03-07) wrapped the global variables such as hostname inside a struct, it forgot to convert one location that spelled "hostname" that needs to be updated to "hi->hostname". This was inside NO_IPV6 block, and was not caught by anybody. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-09daemon: deglobalize hostname informationLibravatar René Scharfe1-59/+74
Move the variables related to the client-supplied hostname into its own struct, let execute() own an instance of that instead of storing the information in global variables and pass the struct to any function that needs to access it as a parameter. The lifetime of the variables is easier to see this way. Allocated memory is released within execute(). The strbufs don't have to be reset anymore because they are written to only once at most: parse_host_arg() is only called once by execute() and lookup_hostname() guards against being called twice using hostname_lookup_done. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-09daemon: use strbuf for hostname infoLibravatar René Scharfe1-57/+41
Convert hostname, canon_hostname, ip_address and tcp_port to strbuf. This allows to get rid of the helpers strbuf_addstr_or_null() and STRARG because a strbuf always represents a valid (initially empty) string. sanitize_client() is not needed anymore and sanitize_client_strbuf() takes its place and name. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-03Merge branch 'jk/daemon-interpolate'Libravatar Junio C Hamano1-5/+45
The "interpolated-path" option of "git daemon" inserted any string client declared on the "host=" capability request without checking. Sanitize and limit %H and %CH to a saner and a valid DNS name. * jk/daemon-interpolate: daemon: sanitize incoming virtual hostname t5570: test git-daemon's --interpolated-path option git_connect: let user override virtual-host we send to daemon
2015-03-03Merge branch 'rs/daemon-interpolate'Libravatar Junio C Hamano1-15/+72
"git daemon" looked up the hostname even when "%CH" and "%IP" interpolations are not requested, which was unnecessary. * rs/daemon-interpolate: daemon: use callback to build interpolated path daemon: look up client-supplied hostname lazily
2015-02-17daemon: use callback to build interpolated pathLibravatar René Scharfe1-9/+45
Provide a callback function for strbuf_expand() instead of using the helper strbuf_expand_dict_cb(). While the resulting code is longer, it only looks up the canonical hostname and IP address if at least one of the placeholders %CH and %IP are used with --interpolated-path. Use a struct for passing the directory to the callback function instead of passing it directly to avoid having to cast away its const qualifier. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-17daemon: look up client-supplied hostname lazilyLibravatar René Scharfe1-8/+29
Look up canonical hostname and IP address using getaddrinfo(3) or gethostbyname(3) only if --interpolated-path or --access-hook were specified. Do that by introducing getter functions for canon_hostname and ip_address and using them for all read accesses. These wrappers call the new helper lookup_hostname(), which sets the variables only at its first call. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-17daemon: sanitize incoming virtual hostnameLibravatar Jeff King1-5/+45
We use the daemon_avoid_alias function to make sure that the pathname the user gives us is sane. However, after applying that check, we might then interpolate the path using a string given by the server admin, but which may contain more untrusted data from the client. We should be sure to sanitize this data, as well. We cannot use daemon_avoid_alias here, as it is more strict than we need in requiring a leading '/'. At the same time, we can be much more strict here. We are interpreting a hostname, which should not contain slashes or excessive runs of dots, as those things are not allowed in DNS names. Note that in addition to cleansing the hostname field, we must check the "canonical hostname" (%CH) as well as the port (%P), which we take as a raw string. For the canonical hostname, this comes from an actual DNS lookup on the accessed IP, which makes it a much less likely vector for problems. But it does not hurt to sanitize it in the same way. Unfortunately we cannot test this case easily, as it would involve a custom hostname lookup. We do not need to check %IP, as it comes straight from inet_ntop, so must have a sane form. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-01use new wrapper write_file() for simple file writingLibravatar Nguyễn Thái Ngọc Duy1-10/+1
This fixes common problems in these code about error handling, forgetting to close the file handle after fprintf() fails, or not printing out the error string.. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-29Merge branch 'rs/daemon-fixes' into maintLibravatar Junio C Hamano1-18/+15
* rs/daemon-fixes: daemon: remove write-only variable maxfd daemon: fix error message after bind() daemon: handle gethostbyname() error
2014-10-14Merge branch 'rs/daemon-fixes'Libravatar Junio C Hamano1-18/+15
"git daemon" (with NO_IPV6 build configuration) used to incorrectly use the hostname even when gethostbyname() reported that the given hostname is not found. * rs/daemon-fixes: daemon: remove write-only variable maxfd daemon: fix error message after bind() daemon: handle gethostbyname() error
2014-10-01daemon: remove write-only variable maxfdLibravatar René Scharfe1-4/+0
It became unused when 6573faff (NO_IPV6 support for git daemon) replaced select() with poll(). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>