| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On OS X (and maybe other unices), getaddrinfo(3) returns NULL
in the ai_canonname field if it's called with an IP address for
the hostname. We'll now use the IP address for the hostname if
ai_canonname was NULL, this also matches the behaviour on Linux.
steps to reproduce:
$ git daemon --export-all
$ git clone git://127.0.0.1/frotz
=> git daemon's fork (silently) segfaults.
Remove the pointless loop while at it. There is only one iteration
because of the break; on the last line and there are no continues.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Certain remote commands, when asked to do something in a
particular directory that was not actually a git repository,
would say "unable to chdir or not a git archive". The
"chdir" bit is an unnecessary detail, and the term "git
archive" is much less common these days than "git repository".
So let's switch them all to:
fatal: '%s' does not appear to be a git repository
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Programs that use git_config need to find the global configuration.
When runtime prefix computation is enabled, this requires that
git_extract_argv0_path() is called early in the program's main().
This commit adds the necessary calls.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add xstrdup_tolower(), a helper to get a lower case copy of a
string, and use it in two cases.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a loop around an enter_repo() call, which was used to retry
a single time with a different parameter in case the first call fails,
with two calls and an if. This is shorter and cleaner.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Die if stderr couldn't be sent to /dev/null when operating in inetd
mode and report the error message from the OS.
This fixes a compiler warning about the return value of freopen()
being ignored on Ubuntu 8.10.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the global variable 'directory' and pass it as a parameter of
the two functions that use it instead, (almost) restoring their
interface to how it was before 49ba83fb67d9e447b86953965ce5f949c6a93b81.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Having fill_in_extra_table_entries() as a separate function has no
advantage -- a function with no parameters and return values might as
well be an anonymous block of code. Its name still refers to the table
of interpolate() which has been removed earlier, so it's better to
inline it at its only call site.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows hooks like pre-receive to look at the client's IP
address.
Of course the IP address can't be used to get strong security;
git-daemon isn't the right thing to use if you need that. However,
basic IP address checking can be good enough in some situations.
REMOTE_ADDR is the same environment variable used to communicate the
client's address to CGI scripts.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
|
|
A simple "grep -e stat --and -e S_ISDIR" revealed there are many
open-coded implementations of this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is outside POSIX (Linux and recent BSD have it). Replace it
with setvbuf() which is POSIX.
I am not sure about the value this patch passes as size argument to
setvbuf(), though. I know the call this patch makes is equivalent to
calling setlinebuf() with GNU libc, but POSIX itself leaves what happens
to the size argument quite vague, saying only "otherwise [i.e. when buf is
a null pointer], size _may_ determine the size of a buffer allocated by
the setvbuf() function." If passing size=0 causes stdio to allocate very
small buffer, and while stdio tries to line buffer the output, it might
make it to fail to buffer an entire line, causing early flushing of the
stream.
Even if that turns out to be a problem on minorority platforms, we won't
know it until the issue actually hurts them, so let's push this change out
and see what happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* "else" on the same line as "}" that closes corresponding "if (...) {";
* multi-line comments begin with "/*\n";
* sizeof, even it is not a function, is written as "sizeof(...)";
* no need to check x?alloc() return value -- it would have died;
* "if (...) { ... }" that covers the whole function body can be dedented
by returning from the function early with "if (!...) return;";
* SP on each side of an operator, i.e. "a > 0", not "a>0";
Also removes stale comment describing how remove_child() used to do its
thing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>:
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of the fixed array of children and make max-connections
dynamic and configurable.
Fix the killing code to actually kill the newest connections from
duplicate IP-addresses.
Avoid forking if too busy already.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move almost all code out of the child_handler() into check_dead_children().
The fact that systemcalls get interrupted by signals allows us to
make the SIGCHLD signal handler almost a no-op by simply running
check_dead_children() right before waiting on poll().
In case some systems do not interrupt systemcalls upon signal receipt,
all zombies will eventually be collected before the next poll() cycle.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git-daemon use LOG_PID like most daemons, instead of prepending the
pid to the message ourselves, when using syslog(3).
Simplify the logging code by setting stderr to line buffered, instead of
building a single string and writing it out with a single write(2).
Give an extra log message at the daemon start-up.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use logerror(), not error(), so that the messages won't be lost,
especially when running the daemon with its log sent to the syslog
facility.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes the bug on (amongst others) Solaris that only the first
child ever is reaped.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To avoid waking up unnecessarily, a pipe is set up that is only ever
written to by child_handler(), when a child disconnects, as suggested
per Junio.
This avoids waking up the main process every second to see if a child
was disconnected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signal handlers should never call syslog(), as that can raise signals
of its own.
Instead, call the syslog() from the master process.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any request to the daemon would fail if base-path (if specified) is not
a directory. We now check for this condition early.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were a number of die() calls before the syslog was opened; hence,
these error messages would have been sent to /dev/null in detached mode.
Now we install the daemon-specific die routine before any error message is
generated so that these messages go to the syslog.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The port number in struct sockaddr_in needs to be converted from network
byte order to host byte order (on some architectures).
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I found I needed NI_MAXSERV as it is defined in netdb.h, which is
not included by daemon.c. Rather than including the whole header
we can define a reasonable fallback value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I switched git.kernel.dk to --base-path a few minutes ago, to get rid of
a /data/git postfix in the posted urls. But transitioning is tricky,
since now all old paths will fail miserably.
So I added this --base-path-relaxed option, that will make git-daemon
try the absolute path without prefixing --base-path before giving up.
With this in place and --base-path-relaxed added, both my new url of
git://git.kernel.dk/linux-2.6-block.git
and the old
git://git.kernel.dk/data/git/linux-2.6-block.git
work fine.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note: since the consequence of failure is to call die,
I don't bother to close "f".
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes it possible to restart git-daemon even if some children are
still running.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows pushing over the git:// protocol, and while it's not
authenticated, it could make sense from within a firewalled
setup where nobody but trusted internal people can reach the git
port. git-daemon is possibly easier and faster to set up in the
kind of situation where you set up git instead of CVS inside a
company.
"git-receive-pack" is disabled by default, so you need to enable it
explicitly by starting git-daemon with the "--enable=receive-pack"
command line argument, or by having your config enable it automatically.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In the older times, the clients did not say which host they were trying
to connect, and the code we recently added did not quite handle the
older clients correctly.
Noticed by Simon Arlott.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Clarified that parse_extra_args()s results in interpolation
table entries. Removed a few trailing whitespace occurrences.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Standardized on lowercase hostnames from client.
Added interpolation values for the IP address, port and
canonical hostname of the server as it is contacted and
named by the client and passed in via the extended args.
Added --listen=host_or_ipaddr option suport. Renamed port
variable as "listen_port" correspondingly as well.
Documented mutual exclusivity of --inetd option with
--user, --group, --listen and --port options.
Added compat/inet_pton.c from Paul Vixie as needed.
Small memory leaks need to be cleaned up still.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Jon Loeliger
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This reverts parts of commit 74c0cc2 and part of commit 355f541.
Franck and Rene are working on a unified upload-archive which
would supersede this when done, so better not to get in their
way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows clients to ask for tarballs with:
git tar-tree --remote=git://server/repo refname
By default, the upload-tar service is not enabled. To enable
it server-wide, the server can be started with:
git-daemon --enable=upload-tar
This service is by default overridable per repostiory, so
alternatively, a repository can define "daemon.uploadtar = true"
to enable it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Benjamin Kramer
Jeff King
Steffen Prohaska
Alexander Potashev
René Scharfe
Joey Hess
Shawn O. Pearce
Junio C Hamano
David Soria Parra
Stephen R. van den Berg
Johannes Schindelin
Stephan Beyer
Johannes Sixt
Gerrit Pape
Patrick Welche
Jens Axboe
Pierre Habouzit
Jim Meyering
Junio C Hamano
Alexandre Julliard
Pavel Roskin
Linus Torvalds
Andy Whitcroft
Alex Riesen
Jon Loeliger
Franck Bui-Huu