summaryrefslogtreecommitdiff
path: root/contrib
AgeCommit message (Collapse)AuthorFilesLines
2017-05-01Merge branch 'jk/complete-checkout-sans-dwim-remote'Libravatar Junio C Hamano1-1/+10
Completion for "git checkout <branch>" that auto-creates the branch out of a remote tracking branch can now be disabled, as this completion often gets in the way when completing to checkout an existing local branch that happens to share the same prefix with bunch of remote tracking branches. * jk/complete-checkout-sans-dwim-remote: completion: optionally disable checkout DWIM
2017-04-23completion: optionally disable checkout DWIMLibravatar Jeff King1-1/+10
When we complete branch names for "git checkout", we also complete remote branch names that could trigger the DWIM behavior. Depending on your workflow and project, this can be either convenient or annoying. For instance, my clone of gitster.git contains 74 local "jk/*" branches, but origin contains another 147. When I want to checkout a local branch but can't quite remember the name, tab completion shows me 251 entries. And worse, for a topic that has been picked up for pu, the upstream branch name is likely to be similar to mine, leading to a high probability that I pick the wrong one and accidentally create a new branch. This patch adds a way for the user to tell the completion code not to include DWIM suggestions for checkout. This can already be done by typing: git checkout --no-guess jk/<TAB> but that's rather cumbersome. The downside, of course, is that you no longer get completion support when you _do_ want to invoke the DWIM behavior. But depending on your workflow, that may not be a big loss (for instance, in git.git I am much more likely to want to detach, so I'd type "git checkout origin/jk/<TAB>" anyway). Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-23completion: expand "push --delete <remote> <ref>" for refs on that <remote>Libravatar Ævar Arnfjörð Bjarmason1-0/+1
Change the completion of "push --delete <remote> <ref>" to complete refs on that <remote>, not all refs. Before this cloning git.git and doing "git push --delete origin p<TAB>" will complete nothing, since a fresh clone of git.git will have no "pu" branch, whereas origin/p<TAB> will uselessly complete origin/pu, but fully qualified references aren't accepted by "--delete". Now p<TAB> will complete as "pu". The completion of giving --delete later, e.g. "git push origin --delete p<TAB>" remains unchanged, this is a bug, but is a general existing limitation of the bash completion, and not how git-push is documented, so I'm not fixing that case, but adding a failing TODO test for it. The testing code was supplied by SZEDER Gábor in <20170421122832.24617-1-szeder.dev@gmail.com> with minor setup modifications on my part. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Test-code-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-16Merge branch 'jc/bs-t-is-not-a-tab-for-sed'Libravatar Junio C Hamano1-2/+2
Code cleanup. * jc/bs-t-is-not-a-tab-for-sed: contrib/git-resurrect.sh: do not write \t for HT in sed scripts
2017-04-11Merge branch 'ab/ref-filter-no-contains'Libravatar Junio C Hamano1-2/+2
"git tag/branch/for-each-ref" family of commands long allowed to filter the refs by "--contains X" (show only the refs that are descendants of X), "--merged X" (show only the refs that are ancestors of X), "--no-merged X" (show only the refs that are not ancestors of X). One curious omission, "--no-contains X" (show only the refs that are not descendants of X) has been added to them. * ab/ref-filter-no-contains: tag: add tests for --with and --without ref-filter: reflow recently changed branch/tag/for-each-ref docs ref-filter: add --no-contains option to tag/branch/for-each-ref tag: change --point-at to default to HEAD tag: implicitly supply --list given another list-like option tag: change misleading --list <pattern> documentation parse-options: add OPT_NONEG to the "contains" option tag: add more incompatibles mode tests for-each-ref: partly change <object> to <commit> in help tag tests: fix a typo in a test description tag: remove a TODO item from the test suite ref-filter: add test for --contains on a non-commit ref-filter: make combining --merged & --no-merged an error tag doc: reword --[no-]merged to talk about commits, not tips tag doc: split up the --[no-]merged documentation tag doc: move the description of --[no-]merged earlier
2017-03-31contrib/git-resurrect.sh: do not write \t for HT in sed scriptsLibravatar Junio C Hamano1-2/+2
Just like we did in 0d1d6e50 ("t/t7003: replace \t with literal tab in sed expression", 2010-08-12), avoid writing "\t" for HT in sed scripts, which is not portable. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-30Merge branch 'sg/completion-ctags'Libravatar Junio C Hamano1-6/+66
Command line completion updates. * sg/completion-ctags: completion: offer ctags symbol names for 'git log -S', '-G' and '-L:' completion: extract completing ctags symbol names into helper function completion: put matching ctags symbol names directly into COMPREPLY
2017-03-30Merge branch 'sg/completion-refs-speedup'Libravatar Junio C Hamano2-71/+190
The refs completion for large number of refs has been sped up, partly by giving up disambiguating ambiguous refs and partly by eliminating most of the shell processing between 'git for-each-ref' and 'ls-remote' and Bash's completion facility. * sg/completion-refs-speedup: completion: speed up branch and tag completion completion: fill COMPREPLY directly when completing fetch refspecs completion: fill COMPREPLY directly when completing refs completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery completion: let 'for-each-ref' strip the remote name from remote branches completion: let 'for-each-ref' and 'ls-remote' filter matching refs completion: don't disambiguate short refs completion: don't disambiguate tags and branches completion: support excluding full refs completion: support completing fully qualified non-fast-forward refspecs completion: support completing full refs after '--option=refs/<TAB>' completion: wrap __git_refs() for better option parsing completion: remove redundant __gitcomp_nl() options from _git_commit()
2017-03-24ref-filter: add --no-contains option to tag/branch/for-each-refLibravatar Ævar Arnfjörð Bjarmason1-2/+2
Change the tag, branch & for-each-ref commands to have a --no-contains option in addition to their longstanding --contains options. This allows for finding the last-good rollout tag given a known-bad <commit>. Given a hypothetically bad commit cf5c7253e0, the git version to revert to can be found with this hacky two-liner: (git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') | sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10 With this new --no-contains option the same can be achieved with: git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10 As the filtering machinery is shared between the tag, branch & for-each-ref commands, implement this for those commands too. A practical use for this with "branch" is e.g. finding branches which were branched off between v2.8.0 and v2.10.0: git branch --contains v2.8.0 --no-contains v2.10.0 The "describe" command also has a --contains option, but its semantics are unrelated to what tag/branch/for-each-ref use --contains for. A --no-contains option for "describe" wouldn't make any sense, other than being exactly equivalent to not supplying --contains at all, which would be confusing at best. Add a --without option to "tag" as an alias for --no-contains, for consistency with --with and --contains. The --with option is undocumented, and possibly the only user of it is Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's trivial to support, so let's do that. The additions to the the test suite are inverse copies of the corresponding --contains tests. With this change --no-contains for tag, branch & for-each-ref is just as well tested as the existing --contains option. In addition to those tests, add a test for "tag" which asserts that --no-contains won't find tree/blob tags, which is slightly unintuitive, but consistent with how --contains works & is documented. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'Libravatar SZEDER Gábor1-0/+28
Just like in the case of search patterns for 'git grep', see 29eec71f2 (completion: match ctags symbol names in grep patterns, 2011-10-21)), a common thing to look for using 'git log -S', '-G' and '-L:' is the name of a symbol. Teach the completion for 'git log' to offer ctags symbol names after these options, both in stuck and in unstuck forms. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: extract completing ctags symbol names into helper functionLibravatar SZEDER Gábor1-4/+29
The previous commit doubled the number of __git_match_ctag()'s positional parameters, and, to keep the position of existing parameters for the sake of backwards compatibility, the prefix, current word and suffix parameters ended up in different order than in other functions accepting the same parameters. Then there is a condition checking the existence of the tag file before invoking this function. We could still live with this if there were only a single callsite, but the next commit will add a few more, so it's worth providing a cleaner interface. Add the wrapper function __git_complete_symbol(), which encompasses the condition for checking the presence of the tag file and filling COMPREPLY, and accepts '--opt=val'-style options with default values that keep callsites simpler. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: put matching ctags symbol names directly into COMPREPLYLibravatar SZEDER Gábor1-3/+10
The one-liner awk script in __git_match_ctag() listing ctags symbol names for 'git grep <TAB>' is already smart enough to list only symbol names matching the current word to be completed. Extend this helper function to accept prefix and suffix parameters to be prepended and appended, respectively, to each listed symbol name in the awk script, so its output won't require any additional processing or filtering in the completion script before being handed over to Bash. Use the faster __gitcomp_direct() helper instead of __gitcomp_nl() to fill the fully processed matching symbol names into Bash's COMPREPLY array. Right after 'git grep <TAB>' in current git.git with 14k+ symbol names in the tag file, best of five: Before: $ time __gitcomp_nl "$(__git_match_ctag "" tags)" real 0m0.178s user 0m0.176s sys 0m0.000s After: $ time __gitcomp_direct "$(__git_match_ctag "" tags "" " ")" real 0m0.058s user 0m0.048s sys 0m0.008s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: speed up branch and tag completionLibravatar SZEDER Gábor1-6/+19
Modify __git_heads() and __git_tags() and the few callsites they have, so we can let 'git for-each-ref' do all the hard work and these functions' output won't need any further processing or filtering before being handed over to Bash, resulting in faster branch and tag completion. These are some of the same tricks used in the previous commits to speed up refs completion, namely: - Extend both functions to accept prefix, current word and suffix positional parameters, all optional and all empty by default to keep the parameterless behavior unaltered. - Specify appropriate globbing patterns to 'git for-each-ref' to list only branches or tags matching the given current word parameter. - Modify the 'git for-each-ref --format=<...>' to include the given prefix and suffix. - Adjust all callsites to specify the proper prefix, current word and suffix parameters, and to fill COMPREPLY using __gitcomp_direct(). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: fill COMPREPLY directly when completing fetch refspecsLibravatar SZEDER Gábor1-3/+3
The __git_complete_fetch_refspecs() has to iterate over __git_refs()'s output anyway to turn the listed matching refs into refspecs, and it knows about the prefix and suffix that has to be added to each refspec. Modify this function to add the prefix and suffix to each refspec while iterating and feed the result, since it doesn't need further processing, to the new __gitcomp_direct() helper added in the previous commit, because it should be faster when there are a lot of refspecs to list. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: fill COMPREPLY directly when completing refsLibravatar SZEDER Gábor2-14/+49
__gitcomp_nl() iterates over all the possible completion words it gets as argument - filtering matching words, - appending a trailing space to each matching word (in all but two cases), - prepending a prefix to each matching word (when completing words after e.g. '--option=<TAB>' or 'master..<TAB>'), and - adding each matching word to the COMPREPLY array. This takes a while when a lot of refs are passed to __gitcomp_nl(). The previous changes in this series ensure that __git_refs() lists only refs matching the current word to be completed, making a second filtering in __gitcomp_nl() redundant. Adding the necessary prefix and suffix could be done in __git_refs() as well: - When refs come from 'git for-each-ref', then that prefix and suffix could be added much more efficiently using a 'git for-each-ref' format containing said prefix and suffix. Care should be taken, though, because that prefix might contain 'for-each-ref' format specifiers as part of the left hand side of a '..' range or '...' symmetric difference notation or fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'. Doubling every '%' in the prefix will prevent 'git for-each-ref' from interpolating any of those contained specifiers. - When refs come from 'git ls-remote', then that prefix and suffix can be added in the shell loop that has to process 'git ls-remote's output anyway. - Finally, the prefix and suffix can be added to that handful of potentially matching symbolic and pseudo refs right away in the shell loop listing them. And then all what is still left to do is to assign a bunch of newline-separated words to a shell array, which can be done without a shell loop iterating over each word, basically making all of __gitcomp_nl() unnecessary for refs completion. Add the helper function __gitcomp_direct() to fill the COMPREPLY array with prefiltered and preprocessed words without any additional processing, without a shell loop, with just one single compound assignment. Modify __git_refs() to accept prefix and suffix parameters and add them to each and every listed ref as described above. Modify __git_complete_refs() to pass the prefix and suffix parameters to __git_refs() and to feed __git_refs()'s output to __gitcomp_direct() instead of __gitcomp_nl(). This speeds up refs completion when there are a lot of refs matching the current word to be completed. Listing all branches for completion in a repo with 100k local branches, all packed, best of five: On Linux, near the beginning of this series, for reference: $ time __git_complete_refs real 0m2.028s user 0m1.692s sys 0m0.344s Before this patch: real 0m1.135s user 0m1.112s sys 0m0.024s After: real 0m0.367s user 0m0.352s sys 0m0.020s On Windows, near the beginning: real 0m13.078s user 0m1.609s sys 0m0.060s Before this patch: real 0m2.093s user 0m1.641s sys 0m0.060s After: real 0m0.683s user 0m0.203s sys 0m0.076s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMeryLibravatar SZEDER Gábor1-1/+2
When listing unique remote branches for 'git checkout's tracking DWIMery, __git_refs() runs the classic '... |sort |uniq -u' pattern to filter out duplicate remote branches. Let 'git for-each-ref' do the sorting, sparing the overhead of fork()+exec()ing 'sort' and a stage in the pipeline where potentially relatively large amount of data can be passed between two subsequent pipeline stages. This speeds up refs completion for 'git checkout' a bit when a lot of remote branches match the current word to be completed. Listing a single local and 100k remote branches, all packed, best of five: On Linux, before: $ time __git_complete_refs --track real 0m1.856s user 0m1.816s sys 0m0.060s After: real 0m1.550s user 0m1.512s sys 0m0.060s On Windows, before: real 0m3.128s user 0m2.155s sys 0m0.183s After: real 0m2.781s user 0m1.826s sys 0m0.136s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMeryLibravatar SZEDER Gábor1-9/+3
The code listing unique remote branches for 'git checkout's tracking DWIMery outputs only remote branches that match the current word to be completed, but the filtering is done in a shell loop iterating over all remote refs. Let 'git for-each-ref' do the filtering, as it can do so much more efficiently and we can remove that shell loop entirely. This speeds up refs completion for 'git checkout' considerably when there are a lot of non-matching remote refs to be filtered out. Uniquely completing a branch in a repository with 100k remote branches, all packed, best of five: On Linux, before: $ time __git_complete_refs --cur=maste --track real 0m1.993s user 0m1.740s sys 0m0.304s After: real 0m0.266s user 0m0.248s sys 0m0.012s On Windows, before: real 0m6.187s user 0m3.358s sys 0m2.121s After: real 0m0.750s user 0m0.015s sys 0m0.090s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: let 'for-each-ref' strip the remote name from remote branchesLibravatar SZEDER Gábor1-4/+3
The code listing unique remote branches for 'git checkout's tracking DWIMery uses a shell parameter expansion in a loop iterating over each listed ref to remove the remote's name from the remote branches, i.e. the leading path component from the short ref. When listing refs from a configured remote repository, '| sed s///' is used for the same purpose. Let 'git for-each-ref' strip one more leading path component from the refs, i.e. use the format 'refname:strip=3' instead of '=2', making that parameter expansion and 'sed' execution unnecessary. This speeds up refs completion for 'git checkout'. Uniquely completing a branch for 'git checkout maste<TAB>' in a repo with 100k remote branches, all packed, best of five: On Linux, near the beginning of this series, for reference: $ time __git_complete_refs --cur=maste --track real 0m8.185s user 0m6.896s sys 0m1.616s Before this patch: real 0m2.714s user 0m2.344s sys 0m0.436s After: real 0m1.993s user 0m1.740s sys 0m0.304s On Windows, near the beginning: real 1m8.421s user 0m7.591s sys 0m3.557s Before this patch: real 0m8.191s user 0m4.638s sys 0m2.918s After: real 0m6.187s user 0m3.358s sys 0m2.121s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: let 'for-each-ref' and 'ls-remote' filter matching refsLibravatar SZEDER Gábor1-11/+30
When completing refs, several __git_refs() code paths list all the refs from the refs/{heads,tags,remotes}/ hierarchy and then __gitcomp_nl() iterates over those refs in a shell loop to filter out refs not matching the current ref to be completed. This comes with a considerable performance penalty when a repository contains a lot of refs but the current ref can be uniquely completed or when only a handful of refs match the current ref. Reduce the number of iterations in __gitcomp_nl() from the number of refs to the number of matching refs by specifying appropriate globbing patterns to 'git for-each-ref' and 'git ls-remote' to list only those refs that match the current ref to be completed. However, do so only when the ref to match is explicitly given as parameter, because the current word on the command line might contain a prefix like '--option=' or 'branch..'. The __git_complete_refs() and __git_complete_fetch_refspecs() helpers introduced previously in this patch series already call __git_refs() specifying this current ref parameter, so all their callsites, i.e. all places in the completion script doing refs completion, can benefit from this optimization. Furthermore, list only those symbolic and pseudo refs that match the current ref to be completed. Though it doesn't matter at all in itself performance-wise, it will allow us further significant optimizations later in this series. This speeds up refs completion considerably when there are a lot of non-matching refs to be filtered out. Uniquely completing a branch in a repository with 100k local branches, all packed, best of five: On Linux, before: $ time __git_complete_refs --cur=maste real 0m0.831s user 0m0.808s sys 0m0.028s After: real 0m0.119s user 0m0.104s sys 0m0.008s On Windows, before: real 0m1.480s user 0m1.031s sys 0m0.060s After: real 0m0.377s user 0m0.015s sys 0m0.030s Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: don't disambiguate short refsLibravatar SZEDER Gábor1-3/+3
When the completion script lists short refs it does so using the 'git for-each-ref' format 'refname:short', which makes sure that all listed refs are unambiguous. While disambiguating refs is technically correct in this case, as opposed to the cases discussed in the previous patch, this disambiguation involves several stat() syscalls for each ref, thus, unfortunately, comes at a steep cost especially on Windows and/or when there are a lot of refs to be listed. A user of Git for Windows reported[1] 'git checkout <TAB>' taking ~11 seconds in a repository with just about 4000 refs. However, it's questionable whether ambiguous refs are really that bad to justify that much extra cost: - Ambiguous refs are not that common, - even if a repository contains ambiguous refs, they only hurt when the user actually happens to want to do something with one of the ambiguous refs, and - the issue can be easily circumvented by renaming those ambiguous refs. - On the other hand, apparently not that many refs are needed to make refs completion unacceptably slow on Windows, - and this slowness bites each and every time the user attempts refs completion, even when the repository doesn't contain any ambiguous refs. - Furthermore, circumventing the issue might not be possible or might be considerably more difficult and requires various trade-offs (e.g. working in a repository with only a few selected important refs while keeping a separate repository with all refs for reference). Arguably, in this case the benefits of technical correctness are rather minor compared to the price we pay for it, and we are better off opting for performance over correctness. Use the 'git for-each-ref' format 'refname:strip=2' to list short refs to spare the substantial cost of disambiguating. This speeds up refs completion considerably. Uniquely completing a branch in a repository with 100k local branches, all packed, best of five: On Linux, before: $ time __git_complete_refs --cur=maste real 0m1.662s user 0m1.368s sys 0m0.296s After: real 0m0.831s user 0m0.808s sys 0m0.028s On Windows, before: real 0m12.457s user 0m1.016s sys 0m0.092s After: real 0m1.480s user 0m1.031s sys 0m0.060s [1] - https://github.com/git-for-windows/git/issues/524 Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: don't disambiguate tags and branchesLibravatar SZEDER Gábor1-2/+2
When the completion script has to list only tags or only branches, it uses the 'git for-each-ref' format 'refname:short', which makes sure that all listed tags and branches are unambiguous. However, disambiguating tags and branches in these cases is wrong, because: - __git_tags(), the helper function listing possible tagname arguments for 'git tag', lists an ambiguous tag 'refs/tags/ambiguous' as 'tags/ambiguous'. Its only consumer, 'git tag' expects its tagname argument to be under 'refs/tags/', thus it interprets that abgiguous tag as 'refs/tags/tags/ambiguous'. Clearly wrong. - __git_heads() lists possible branchname arguments for 'git branch' and possible 'branch.<branchname>' configuration subsections. Both of these expect branchnames to be under 'refs/heads/' and misinterpret a disambiguated branchname like 'heads/ambiguous'. Furthermore, disambiguation involves several stat() syscalls for each tag or branch, thus comes at a steep cost especially on Windows and/or when there are a lot of tags or branches to be listed. Use the 'git for-each-ref' format 'refname:strip=2' instead of 'refname:short' to avoid harmful disambiguation of tags and branches in __git_tags() and __git_heads(). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: support excluding full refsLibravatar SZEDER Gábor1-4/+4
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made possible to complete short refs with a '^' prefix. Extend the support to full refs to make completing '^refs/...' work. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: support completing fully qualified non-fast-forward refspecsLibravatar SZEDER Gábor1-1/+20
After 'git fetch <remote> <TAB>' our completion script offers refspecs that will fetch to a local branch with the same name as in the remote repository, e.g. 'master:master'. This also completes non-fast-forward refspecs, i.e. after a '+' prefix like '+master:master', and fully qualified refspecs, e.g. 'refs/heads/master:refs/heads/master'. However, it does not complete non-fast-forward fully qualified refspecs (or fully qualified refspecs following any other prefix, e.g. '--option=', though currently no git command supports such an option, but third party git commands might). These refspecs are listed by the __git_refs2() function, which is just a thin wrapper iterating over __git_refs()'s output, turning each listed ref into a refspec. Now, it's certainly possible to modify __git_refs2() and its callsite to pass an extra parameter containing only the ref part of the current word to be completed (to follow suit of the previous commit) to deal with prefixed fully qualified refspecs as well. Unfortunately, keeping the current behavior unchanged in the "no extra parameter" case brings in a bit of subtlety, which makes the resulting code ugly and compelled me to write a 8-line long comment in the proof of concept. Not good. However, since the callsite has to be modified for proper functioning anyway, we might as well leave __git_refs2() as is and introduce a new helper function without backwards compatibility concerns. Add the new function __git_complete_fetch_refspecs() that has all the necessary parameters to do the right thing in all cases mentioned above, including non-fast-forward fully qualified refspecs. This new function can also easier benefit from optimizations coming later in this patch series. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: support completing full refs after '--option=refs/<TAB>'Libravatar SZEDER Gábor1-7/+14
Completing full refs currently only works when the full ref stands on in its own on the command line, but doesn't work when the current word to be completed contains a prefix before the full ref, e.g. '--option=refs/<TAB>' or 'master..refs/bis<TAB>'. The reason is that __git_refs() looks at the current word to be completed ($cur) as a whole to decide whether it has to list full (if it starts with 'refs/') or short refs (otherwise). However, $cur also holds said '--option=' or 'master..' prefixes, which of course throw off this decision. Luckily, the default action is to list short refs, that's why completing short refs happens to work even after a 'master..<TAB>' prefix and similar cases. Pass only the ref part of the current word to be completed to __git_refs() as a new positional parameter, so it can make the right decision even if the whole current word contains some kind of a prefix. Make this new parameter the 4. positional parameter and leave the 3. as an ignored placeholder for now (it will be used later in this patch series). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-23completion: wrap __git_refs() for better option parsingLibravatar SZEDER Gábor1-35/+67
__git_refs() currently accepts two optional positional parameters: a remote and a flag for 'git checkout's tracking DWIMery. To fix a minor bug, and, more importantly, for faster refs completion, this series will add three more parameters: a prefix, the current word to be completed and a suffix, i.e. the options accepted by __gitcomp() & friends, and will change __git_refs() to list only refs matching that given current word and to add that given prefix and suffix to the listed refs. However, __git_refs() is the helper function that is most likely used in users' custom completion scriptlets for their own git commands, and we don't want to break those, so - we can't change __git_refs()'s default output format, i.e. we can't by default append a trailing space to every listed ref, meaning that the suffix parameter containing the default trailing space would have to be specified on every invocation, and - we can't change the position of existing positional parameters either, so there would have to be plenty of set-but-empty placeholder positional parameters all over the completion script. Furthermore, with five positional parameters it would be really hard to remember which position means what. To keep callsites simple, add the new wrapper function __git_complete_refs() around __git_refs(), which: - instead of positional parameters accepts real '--opt=val'-style options and with minimalistic option parsing translates them to __git_refs()'s and __gitcomp_nl()'s positional parameters, and - includes the '__gitcomp_nl "$(__git_refs ...)" ...' command substitution to make its behavior match its name and the behavior of other __git_complete_* functions, and to limit future changes in this series to __git_refs() and this new wrapper function. Call this wrapper function instead of __git_refs() wherever possible throughout the completion script, i.e. when __git_refs()'s output is fed to __gitcomp_nl() right away without further processing, which means all callsites except a single one in the __git_refs2() helper. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-21Merge branch 'mg/prompt-describe-tags'Libravatar Junio C Hamano1-0/+3
The command line prompt (in contrib/) learned a new 'tag' style that can be specified with GIT_PS1_DESCRIBE_STYLE, to describe a detached HEAD with "git describe --tags". * mg/prompt-describe-tags: git-prompt: add a describe style for any tags
2017-03-15git-prompt: add a describe style for any tagsLibravatar Michael J Gruber1-0/+3
git-prompt has various describe styles, among them "describe" (by annotated tags) and "default" (by exact match with any tag). Add a mode "tag" that describes by any tag, annotated or not. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-12Merge branch 'ss/remote-bzr-hg-placeholder-wo-python'Libravatar Junio C Hamano2-18/+14
There is no need for Python only to give a few messages to the standard error stream, but we somehow did. * ss/remote-bzr-hg-placeholder-wo-python: contrib: git-remote-{bzr,hg} placeholders don't need Python
2017-03-10Merge branch 'rs/strbuf-add-real-path'Libravatar Junio C Hamano2-0/+22
An helper function to make it easier to append the result from real_path() to a strbuf has been added. * rs/strbuf-add-real-path: strbuf: add strbuf_add_real_path() cocci: use ALLOC_ARRAY
2017-03-03contrib: git-remote-{bzr,hg} placeholders don't need PythonLibravatar Sebastian Schuberth2-18/+14
It does not make sense for these placeholder scripts to depend on Python just because the real scripts do. At the example of Git for Windows, we would not even be able to see those warnings as it does not ship with Python. So just use plain shell scripts instead. Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-27Merge branch 'sg/completion'Libravatar Junio C Hamano1-85/+165
Clean-up and updates to command line completion (in contrib/). * sg/completion: (22 commits) completion: restore removed line continuating backslash completion: cache the path to the repository completion: extract repository discovery from __gitdir() completion: don't guard git executions with __gitdir() completion: consolidate silencing errors from git commands completion: don't use __gitdir() for git commands completion: respect 'git -C <path>' rev-parse: add '--absolute-git-dir' option completion: fix completion after 'git -C <path>' completion: don't offer commands when 'git --opt' needs an argument completion: list short refs from a remote given as a URL completion: don't list 'HEAD' when trying refs completion outside of a repo completion: list refs from remote when remote's name matches a directory completion: respect 'git --git-dir=<path>' when listing remote refs completion: fix most spots not respecting 'git --git-dir=<path>' completion: ensure that the repository path given on the command line exists completion tests: add tests for the __git_refs() helper function completion tests: check __gitdir()'s output in the error cases completion tests: consolidate getting path of current working directory completion tests: make the $cur variable local to the test helper functions ...
2017-02-27Merge branch 'jk/describe-omit-some-refs'Libravatar Junio C Hamano1-0/+1
"git describe" and "git name-rev" have been taught to take more than one refname patterns to restrict the set of refs to base their naming output on, and also learned to take negative patterns to name refs not to be used for naming via their "--exclude" option. * jk/describe-omit-some-refs: describe: teach describe negative pattern matches describe: teach --match to accept multiple patterns name-rev: add support to exclude refs by pattern match name-rev: extend --refs to accept multiple patterns doc: add documentation for OPT_STRING_LIST
2017-02-27strbuf: add strbuf_add_real_path()Libravatar René Scharfe1-0/+6
Add a function for appending the canonized absolute pathname of a given path to a strbuf. It keeps the existing contents intact, as expected of a function of the strbuf_add() family, while avoiding copying the result if the given strbuf is empty. It's more consistent with the rest of the strbuf API than strbuf_realpath(), which it's wrapping. Also add a semantic patch demonstrating its intended usage and apply it to the current tree. Using strbuf_add_real_path() instead of calling strbuf_addstr() and real_path() avoids an extra copy to a static buffer. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-27cocci: use ALLOC_ARRAYLibravatar René Scharfe1-0/+16
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply the transformation on the current source tree. The macro checks for multiplication overflow and infers the element size automatically; the result is shorter and safer code. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-16Merge branch 'rs/cocci-check-free-only-null'Libravatar Junio C Hamano1-0/+6
A new coccinelle rule that catches a check of !pointer before the pointer is free(3)d, which most likely is a bug. * rs/cocci-check-free-only-null: cocci: detect useless free(3) calls
2017-02-15Merge branch 'cw/completion'Libravatar Junio C Hamano1-21/+118
More command line completion (in contrib/) for recent additions. * cw/completion: completion: recognize more long-options completion: teach remote subcommands to complete options completion: teach replace to complete options completion: teach ls-remote to complete options completion: improve bash completion for git-add completion: add subcommand completion for rerere completion: teach submodule subcommands to complete options
2017-02-15Merge branch 'rs/swap'Libravatar Junio C Hamano1-0/+28
Code clean-up. * rs/swap: graph: use SWAP macro diff: use SWAP macro use SWAP macro apply: use SWAP macro add SWAP macro
2017-02-13completion: remove redundant __gitcomp_nl() options from _git_commit()Libravatar SZEDER Gábor1-1/+1
Those two options are specifying the default values that __gitcomp_nl() would use anyway when invoked with no options at all. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-13completion: restore removed line continuating backslashLibravatar SZEDER Gábor1-1/+1
Recent commit 1cd23e9e0 (completion: don't use __gitdir() for git commands, 2017-02-03) rewrapped a couple of long lines, and while doing so it inadvertently removed a '\' from the end of a line, thus breaking completion for 'git config remote.name.push <TAB>'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-11cocci: detect useless free(3) callsLibravatar René Scharfe1-0/+6
Add a semantic patch for removing checks that cause free(3) to only be called with a NULL pointer, as that must be a programming mistake. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-10Merge branch 'ew/complete-svn-authorship-options'Libravatar Junio C Hamano1-2/+2
Correct command line completion (in contrib/) on "git svn" * ew/complete-svn-authorship-options: completion: fix git svn authorship switches
2017-02-10Merge branch 'bw/push-submodule-only'Libravatar Junio C Hamano1-1/+1
Add missing documentation update to a recent topic. * bw/push-submodule-only: completion: add completion for --recurse-submodules=only doc: add doc for git-push --recurse-submodules=only
2017-02-06completion: fix git svn authorship switchesLibravatar Eric Wong1-2/+2
--add-author-from and --use-log-author are for "git svn dcommit", not "git svn (init|clone)" Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: recognize more long-optionsLibravatar Cornelius Weig1-9/+20
Command completion only recognizes a subset of the available options for the various git commands. The set of recognized options needs to balance between having all useful options and to not clutter the terminal. This commit adds all long-options that are mentioned in the man-page synopsis of the respective git command. Possibly dangerous options are not included in this set, to avoid accidental data loss. The added options are: - apply: --recount --directory= - archive: --output - branch: --column --no-column --sort= --points-at - clone: --no-single-branch --shallow-submodules - commit: --patch --short --date --allow-empty - describe: --first-parent - fetch, pull: --unshallow --update-shallow - fsck: --name-objects - grep: --break --heading --show-function --function-context --untracked --no-index - mergetool: --prompt --no-prompt - reset: --keep - revert: --strategy= --strategy-option= - shortlog: --email - tag: --merged --no-merged --create-reflog Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: teach remote subcommands to complete optionsLibravatar Cornelius Weig1-7/+38
Git-remote needs to complete remote names, its subcommands, and options thereof. In addition to the existing subcommand and remote name completion, do also complete the options - add: --track --master --fetch --tags --no-tags --mirror= - set-url: --push --add --delete - get-url: --push --all - prune: --dry-run Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: teach replace to complete optionsLibravatar Cornelius Weig1-0/+6
Git-replace needs to complete references and its own options. In addition to the existing references completions, do also complete the options --edit --graft --format= --list --delete. Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: teach ls-remote to complete optionsLibravatar Cornelius Weig1-0/+6
ls-remote needs to complete remote names and its own options. In addition to the existing remote name completions, do also complete the options --heads, --tags, --refs, --get-url, and --symref. Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: improve bash completion for git-addLibravatar Cornelius Weig1-3/+7
Command completion for git-add did not recognize some long-options. This commits adds completion for all long-options that are mentioned in the man-page synopsis. In addition, if the user specified `--update` or `-u`, path completion will only suggest modified tracked files. Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: add subcommand completion for rerereLibravatar Cornelius Weig1-0/+11
Managing recorded resolutions requires command-line usage of git-rerere. Added subcommand completion for rerere and path completion for its subcommand forget. Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-03completion: teach submodule subcommands to complete optionsLibravatar Cornelius Weig1-2/+30
Each submodule subcommand has specific long-options. Therefore, teach bash completion to support option completion based on the current subcommand. All long-options that are mentioned in the man-page synopsis are added. Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>