| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/multimail-renewal:
Update git-multimail to version 1.0.2
|
|
The only changes are to the README files, most notably the list of
maintainers and the project URL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
|
|
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
|
|
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
|
|
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the input is UTF-8 and Perl is operating on bytes instead of
characters, a diff that changes one multibyte character to another
that shares an initial byte sequence will result in a broken diff
display as the common byte sequence prefix will be separated from
the rest of the bytes in the multibyte character.
For example, if a single line contains only the unicode character
U+C9C4 (encoded as UTF-8 0xEC, 0xA7, 0x84) and that line is then
changed to the unicode character U+C9C0 (encoded as UTF-8 0xEC,
0xA7, 0x80), when operating on bytes diff-highlight will show only
the single byte change from 0x84 to 0x80 thus creating invalid UTF-8
and a broken diff display.
Fix this by putting Perl into character mode when splitting the line
and then back into byte mode after the split is finished.
The utf8::xxx functions require Perl 5.8 so we require that as well.
Also, since we are mucking with code in the split_line function, we
change a '*' quantifier to a '+' quantifier when matching the $COLOR
expression which has the side effect of speeding everything up while
eliminating useless '' elements in the returned array.
Reported-by: Yi EungJun <semtlenori@gmail.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* sg/completion-gitcomp-nl-for-refs:
completion: use __gitcomp_nl() for completing refs
|
|
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
|
|
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
|
|
Code clean-up.
* sg/completion-gitcomp-nl-for-refs:
completion: use __gitcomp_nl() for completing refs
|
|
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
|
|
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
|
|
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
|
|
Code simplification.
* sg/completion-remote:
completion: simplify __git_remotes()
completion: add a test for __git_remotes() helper function
|
|
Documentation fixes.
* mg/doc-status-color-slot:
config,completion: add color.status.unmerged
|
|
We do that almost everywhere, because it's faster for large number of
refs, see a31e62629 (completion: optimize refs completion, 2011-10-15).
These were the last two places where we still used __gitcomp() for
completing refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation fixes.
* mg/doc-status-color-slot:
config,completion: add color.status.unmerged
|
|
Code simplification.
* sg/completion-remote:
completion: simplify __git_remotes()
completion: add a test for __git_remotes() helper function
|
|
The __git_ps1() prompt function would not show an untracked state
when all the untracked files are outside the current working
directory.
Signed-off-by: Cody A Taylor <codemister99@yahoo.com>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current definition results in an incorrect expansion of the term under zsh.
For instance "/^${1////\\/}/" under zsh with the argument "hi" results in:
/^/\/h/\/i/
This results in an output similar to this when trying to complete `git grep
chartab` under zsh:
:: git grep chartabawk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ backslash not last character on line
awk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ syntax error
Leaving the prompt in a goofy state until the user hits a key.
Escaping the literal / in the parameter expansion (using "/^${1//\//\\/}/")
results in:
/^chartab/
allowing the completion to work correctly.
This formulation also works under bash.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: "Mladen B." <mladen074@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The __git_remotes() helper function lists the remotes from the config
file by processing the output of a 'git config' query. A simple 'git
remote' produces the exact same output, so run that instead.
Remotes under '$GIT_DIR/remotes' are still listed by running 'ls -1',
because 'git remote' unfortunately ignores them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The credential helper for Windows (in contrib/) used to mishandle
a user name with an at-sign in it.
* av/wincred-with-at-in-username-fix:
wincred: fix get credential if username has "@"
|
|
The credential helper for Windows (in contrib/) used to mishandle
a user name with an at-sign in it.
* av/wincred-with-at-in-username-fix:
wincred: fix get credential if username has "@"
|
|
"git log --invert-grep --grep=WIP" will show only commits that do
not have the string "WIP" in their messages.
* cj/log-invert-grep:
log: teach --invert-grep option
|
|
Such a username with "@" in it isn't all that unusual these days.
cf. https://groups.google.com/forum/#!msg/msysgit/YVuCqmwwRyY/HULHj5OoE88J
Signed-off-by: Aleksey Vasenev <margtu-fivt@ya.ru>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? in all cases
|
|
* rh/hide-prompt-in-ignored-directory:
git-prompt.sh: allow to hide prompt for ignored pwd
git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
|
|
* mm/complete-rebase-autostash:
git-completion: add --autostash for 'git rebase'
|
|
* sp/subtree-doc:
subtree: fix AsciiDoc list item continuation
|
|
Signed-off-by: Tony Finch <dot@dotat.at>
Reviewed-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? inside shell prompt
|
|
The top-of-the-file instruction for completion scripts (in contrib/)
did not name the files correctly.
* pd/completion-filenames-fix:
Update documentation occurrences of filename .sh
|
|
This option was added in 58794775 (rebase: implement
--[no-]autostash and rebase.autostash, 2013-05-12).
Completion of "--autosquash" has been there, but this was not;
addition of this would require people completing "--autosquash" to
type a bit more than before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optionally set __git_ps1 to display nothing when present working
directory is ignored, triggered by the new environment variable
GIT_PS1_HIDE_IF_PWD_IGNORED. This environment variable may be
overridden on any repository by setting bash.hideIfPwdIgnored to
"false". In the absence of GIT_PS1_HIDE_IF_PWD_IGNORED this change
has no effect.
Many people manage e.g. dotfiles in their home directory with git.
This causes the prompt generated by __git_ps1 to refer to that "top
level" repo while working in any descendant directory. That can be
distracting, so this patch helps one shut off that noise.
Signed-off-by: Jess Austin <jess.austin@gmail.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the beginning of __git_ps1, right after determining that the
function is running in pc mode, set PS1 to a plain (undecorated)
prompt. This makes it possible to simply return early without having
to set PS1 if the prompt should not be decorated.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
List items must be continued with '+' (see [asciidoc]).
[asciidoc] AsciiDoc user guide 17.7. List Item Continuation
<http://www.methods.co.nz/asciidoc/userguide.html#X15>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git-prompt" (in contrib/) used a variable from the global scope,
possibly contaminating end-user's namespace.
* jg/prompt-localize-temporary:
git-prompt.sh: make $f local to __git_eread()
|
|
"diff-highlight" filter (in contrib/) allows its color output
to be customized via configuration variables.
* jk/colors:
parse_color: drop COLOR_BACKGROUND macro
diff-highlight: allow configurable colors
parse_color: recognize "no$foo" to clear the $foo attribute
parse_color: support 24-bit RGB values
parse_color: refactor color storage
|
|
* rt/completion-tag:
completion: add git-tag options
|
|
"git new-workdir" (in contrib/) can be used to populate an empty
and existing directory now.
* ps/new-workdir-into-empty-directory:
git-new-workdir: don't fail if the target directory is empty
|
|
If you have a prompt which displays the command exit status,
__git_ps1 without this change corrupts it, although it has
the correct value in the parent shell:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(__git_ps1) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 0 $ echo $?
1
~/src/git (master) 0 $
There is a slightly ugly workaround:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(x=$?; __git_ps1; exit $x) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 1 $
This change makes the workaround unnecessary.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation in the completion scripts for Bash and Zsh state the wrong filenames.
Signed-off-by: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Charles Bailey
Junio C Hamano
Michael Haggerty
Márcio Almada
Kyle J. McKay
SZEDER Gábor
Cody A Taylor
John Szakmeister
Dave Olszewski
Michael J Gruber
Aleksey Vasenev
Tony Finch
Christoph Junghans
Matthieu Moy
Jess Austin
Richard Hansen
Steffen Prohaska
Peter van der Does