| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tests update in contrib/subtree.
* cb/subtree-tests-update:
contrib/subtree: small tidy-up to test
contrib/subtree: fix broken &&-chains and revealed test error
contrib/subtree: use tabs consitently for indentation in tests
|
|
The only change is a bugfix: the SMTP mailer was not working with
Python 2.4.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* jc/prompt-document-ps1-state-separator:
git-prompt.sh: document GIT_PS1_STATESEPARATOR
|
|
Recent Mac OS X updates breaks the logic to detect that the machine
is on the AC power in the sample pre-auto-gc script.
* pa/auto-gc-mac-osx:
hooks/pre-auto-gc: adjust power checking for newer OS X
|
|
The tcsh completion writes a bash scriptlet but that would have
failed for users with noclobber set.
* af/tcsh-completion-noclobber:
git-completion.tcsh: fix redirect with noclobber
|
|
* sg/completion-commit-cleanup:
completion: teach 'scissors' mode to 'git commit --cleanup='
|
|
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Richard Hansen <rhansen@rhansen.org>
Contributions-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Elijah Newren <newren@gmail.com>
Contributions-by: Luke Mewburn <luke@mewburn.net>
Contributions-by: Dave Boutcher <daveboutcher@gmail.com>
Contributions-by: Azat Khuzhin <a3at.mail@gmail.com>
Contributions-by: Sebastian Schuberth <sschuberth@gmail.com>
Contributions-by: Mikko Johannes Koivunalho <mikko.koivunalho@iki.fi>
Contributions-by: Elijah Newren <newren@palantir.com>
Contributions-by: Benoît Ryder <benoit@ryder.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bash completion script (in contrib/) learned a few options that
"git revert" takes.
* tb/complete-sequencing:
completion: suggest sequencer commands for revert
|
|
The environment variable GIT_PS1_STATESEPARATOR can be used to set the
separator between the branch name and the state symbols in the prompt.
At present the variable is not mentioned in the inline documentation which
makes it difficult for the casual user to identify.
Signed-off-by: Joe Cridge <joe.cridge@me.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
tcsh users who happen to have 'set noclobber' elsewhere in their
~/.tcshrc or ~/.cshrc startup files get a 'File exist' error, and
the tcsh completion file doesn't get generated/updated.
Adding a `!` in the redirect works correctly for both clobber (default)
and 'set noclobber' users.
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Ariel Faigon <github.2009@yendor.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Acked-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up for completion script (in contrib/).
* sg/completion-config:
completion: simplify query for config variables
completion: add a helper function to get config variables
|
|
Introduce http.<url>.SSLCipherList configuration variable to tweak
the list of cipher suite to be used with libcURL when talking with
https:// sites.
* ls/http-ssl-cipher-list:
http: add support for specifying an SSL cipher list
|
|
"git subtree" script (in contrib/) used "echo -n" to produce
progress messages in a non-portable way.
* dl/subtree-avoid-tricky-echo:
contrib/subtree: portability fix for string printing
|
|
"git subtree" script (in contrib/) does not have --squash option
when pushing, but the documentation and help text pretended as if
it did.
* dl/subtree-push-no-squash:
contrib/subtree: there's no push --squash
|
|
The Git subcommand completion (in contrib/) listed credential
helpers among candidates, which is not something the end user would
invoke interatively.
* sg/completion-omit-credential-helpers:
completion: remove credential helpers from porcelain commands
|
|
To get the name of all config variables in a given section we perform a
'git config --get-regex' query for all config variables containing the
name of that section, and then filter its output through a case statement
to throw away those that though contain but don't start with the given
section.
Modify the regex to match only at the beginning, so the case statement
becomes unnecessary and we can get rid of it. Add a test to check that a
match in the middle doesn't fool us.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently there are a few completion functions that perform similar 'git
config' queries and filtering to get config variable names: the completion
of pretty aliases, aliases, and remote groups for 'git remote update'.
Unify those 'git config' queries in a helper function to eliminate code
duplication.
Though the helper functions to get pretty aliases and alieses are reduced
to mere one-liner wrappers around the newly added function, keep these
helpers still, because users' completion functions out there might depend
on them. And they keep their callers a tad easier to read, too.
Add tests for the pretty alias and alias helper to show that they work
as before; not for the remote groups query, though, because that's not
extracted into a helper function and it's not worth the effort to do so
for a sole callsite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* sg/completion-no-redundant-all-command-list:
completion: remove redundant __git_compute_all_commands() call
|
|
The completion for "log --decorate=" parameter value was incorrect.
* sg/complete-decorate-full-not-long:
completion: fix and update 'git log --decorate=' options
|
|
'echo -n' is not portable, but this script used it as a way to give
a string followed by a carriage return for progress messages.
Introduce a new helper shell function "progress" and use printf as a
more portable way to do this. As a side effect, this makes it
unnecessary to have a raw CR in our source, which can be munged in
some shells. For example, MsysGit trims CR before executing a shell
script file in order to make it work right on Windows even if it
uses CRLF as linefeeds.
While at it, replace "echo" using printf in debug() and say() to
eliminate the temptation of reintroducing the same bug.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git about a new option, "http.sslCipherList", which permits one to
specify a list of ciphers to use when negotiating SSL connections. The
setting can be overwridden by the GIT_SSL_CIPHER_LIST environment
variable.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation says that --squash is for 'add', 'merge',
'pull' and 'push', while --squash actually doesn't change
the behavior of 'push'. Correct the documentation.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't offer the "main" 'git credential' command or any of the credential
helpers from contrib/credential/ when completing git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git log --decorate=' understands the 'full', 'short' and 'no' options.
From these the completion script only offered 'short' and it offered
'long' instead of 'full'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During lazy-initialization of the lists of all commands and porcelain
commands the function __git_compute_all_commands() is called twice. The
relevant part of the call sequence looks like this:
__git_compute_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands uninitialized>
__git_list_all_commands()
<initializes list of all commands>
__git_list_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands already initialized, does nothing>
<filters porcelains from list of all commands>
Either one of the two calls could be removed and the initialization of
both command lists would still work as a whole, but let's remove the call
from __git_compute_porcelain_commands(), because this way
__git_list_porcelain_commands() will keep working in itself.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/multimail-renewal:
Update git-multimail to version 1.0.2
|
|
The only changes are to the README files, most notably the list of
maintainers and the project URL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
|
|
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
|
|
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
|
|
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the input is UTF-8 and Perl is operating on bytes instead of
characters, a diff that changes one multibyte character to another
that shares an initial byte sequence will result in a broken diff
display as the common byte sequence prefix will be separated from
the rest of the bytes in the multibyte character.
For example, if a single line contains only the unicode character
U+C9C4 (encoded as UTF-8 0xEC, 0xA7, 0x84) and that line is then
changed to the unicode character U+C9C0 (encoded as UTF-8 0xEC,
0xA7, 0x80), when operating on bytes diff-highlight will show only
the single byte change from 0x84 to 0x80 thus creating invalid UTF-8
and a broken diff display.
Fix this by putting Perl into character mode when splitting the line
and then back into byte mode after the split is finished.
The utf8::xxx functions require Perl 5.8 so we require that as well.
Also, since we are mucking with code in the split_line function, we
change a '*' quantifier to a '+' quantifier when matching the $COLOR
expression which has the side effect of speeding everything up while
eliminating useless '' elements in the returned array.
Reported-by: Yi EungJun <semtlenori@gmail.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* sg/completion-gitcomp-nl-for-refs:
completion: use __gitcomp_nl() for completing refs
|
|
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
|
|
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
|
|
Code clean-up.
* sg/completion-gitcomp-nl-for-refs:
completion: use __gitcomp_nl() for completing refs
|
|
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
|
|
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
|
|
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
|
|
Code simplification.
* sg/completion-remote:
completion: simplify __git_remotes()
completion: add a test for __git_remotes() helper function
|
|
Documentation fixes.
* mg/doc-status-color-slot:
config,completion: add color.status.unmerged
|
|
We do that almost everywhere, because it's faster for large number of
refs, see a31e62629 (completion: optimize refs completion, 2011-10-15).
These were the last two places where we still used __gitcomp() for
completing refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation fixes.
* mg/doc-status-color-slot:
config,completion: add color.status.unmerged
|
Junio C Hamano
Matthieu Moy
Charles Bailey
Panagiotis Astithas
Joe Cridge
Ariel Faigon
SZEDER Gábor
Thomas Braun
Danny Lin
Lars Kellogg-Stedman
Michael Haggerty
Márcio Almada
Kyle J. McKay