summaryrefslogtreecommitdiff
path: root/contrib
AgeCommit message (Collapse)AuthorFilesLines
2018-11-21Merge branch 'jc/cocci-preincr' into maintLibravatar Junio C Hamano1-0/+5
Code cleanup. * jc/cocci-preincr: fsck: s/++i > 1/i++/ cocci: simplify "if (++u > 1)" to "if (u++)"
2018-10-24cocci: simplify "if (++u > 1)" to "if (u++)"Libravatar Junio C Hamano1-0/+5
It is more common to use post-increment than pre-increment when the side effect is the primary thing we want in our code and in C in general (unlike C++). Initializing a variable to 0, incrementing it every time we do something, and checking if we have already done that thing to guard the code to do that thing, is easier to understand when written if (u++) ; /* we've done that! */ else do_it(); /* just once. */ but if you try to use pre-increment, you end up with a less natural looking if (++u > 1) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-12doc: move git-cherry to plumbingLibravatar Daniels Umanovskis1-11/+0
Also remove git-cherry from Bash completion because plumbing commands do not belong there. Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20Merge branch 'js/range-diff'Libravatar Junio C Hamano1-0/+14
"git tbdiff" that lets us compare individual patches in two iterations of a topic has been rewritten and made into a built-in command. * js/range-diff: (21 commits) range-diff: use dim/bold cues to improve dual color mode range-diff: make --dual-color the default mode range-diff: left-pad patch numbers completion: support `git range-diff` range-diff: populate the man page range-diff --dual-color: skip white-space warnings range-diff: offer to dual-color the diffs diff: add an internal option to dual-color diffs of diffs color: add the meta color GIT_COLOR_REVERSE range-diff: use color for the commit pairs range-diff: add tests range-diff: do not show "function names" in hunk headers range-diff: adjust the output of the commit pairs range-diff: suppress the diff headers range-diff: indent the diffs just like tbdiff range-diff: right-trim commit messages range-diff: also show the diff between patches range-diff: improve the order of the shown commits range-diff: first rudimentary implementation Introduce `range-diff` to compare iterations of a topic branch ...
2018-08-15Merge branch 'es/mw-to-git-chain-fix'Libravatar Junio C Hamano1-1/+1
Test fix. * es/mw-to-git-chain-fix: mw-to-git/t9360: fix broken &&-chain
2018-08-15Merge branch 'jn/subtree-test-fixes'Libravatar Junio C Hamano1-90/+31
Test fix. * jn/subtree-test-fixes: subtree test: simplify preparation of expected results subtree test: add missing && to &&-chain
2018-08-15Merge branch 'js/vscode'Libravatar Junio C Hamano3-0/+390
Add a script (in contrib/) to help users of VSCode work better with our codebase. * js/vscode: vscode: let cSpell work on commit messages, too vscode: add a dictionary for cSpell vscode: use 8-space tabs, no trailing ws, etc for Git's source code vscode: wrap commit messages at column 72 by default vscode: only overwrite C/C++ settings mingw: define WIN32 explicitly cache.h: extract enum declaration from inside a struct declaration vscode: hard-code a couple defines contrib: add a script to initialize VS Code configuration
2018-08-13range-diff: make --dual-color the default modeLibravatar Johannes Schindelin1-1/+1
After using this command extensively for the last two months, this developer came to the conclusion that even if the dual color mode still leaves a lot of room for confusion about what was actually changed, the non-dual color mode is substantially worse in that regard. Therefore, we really want to make the dual color mode the default. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13completion: support `git range-diff`Libravatar Johannes Schindelin1-0/+14
Tab completion of `git range-diff` is very convenient, especially given that the revision arguments to specify the commit ranges to compare are typically more complex than, say, what is normally passed to `git log`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-02Merge branch 'ds/commit-graph-fsck'Libravatar Junio C Hamano1-1/+1
"git fsck" learns to make sure the optional commit-graph file is in a sane state. * ds/commit-graph-fsck: (23 commits) coccinelle: update commit.cocci commit-graph: update design document gc: automatically write commit-graph files commit-graph: add '--reachable' option commit-graph: use string-list API for input fsck: verify commit-graph commit-graph: verify contents match checksum commit-graph: test for corrupted octopus edge commit-graph: verify commit date commit-graph: verify generation number commit-graph: verify parent list commit-graph: verify root tree OIDs commit-graph: verify objects exist commit-graph: verify corrupt OID fanout and lookup commit-graph: verify required chunks are present commit-graph: verify catches corrupt signature commit-graph: add 'verify' subcommand commit-graph: load a root tree from specific graph commit: force commit to parse from object database commit-graph: parse commit from chosen graph ...
2018-07-31mw-to-git/t9360: fix broken &&-chainLibravatar Eric Sunshine1-1/+1
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30subtree test: simplify preparation of expected resultsLibravatar Jonathan Nieder1-89/+30
This mixture of quoting, pipes, and here-docs to produce expected results in shell variables is difficult to follow. Simplify by using simpler constructs that write output to files instead. Noticed because without this patch, t/chainlint is not able to understand the script in order to validate that its subshells use an unbroken &&-chain, causing "make -C contrib/subtree test" to fail with error: bug in the test script: broken &&-chain or run-away HERE-DOC: in t7900.21. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30subtree test: add missing && to &&-chainLibravatar Jonathan Nieder1-1/+1
Detected using t/chainlint. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: let cSpell work on commit messages, tooLibravatar Johannes Schindelin1-0/+2
By default, the cSpell extension ignores all files under .git/. That includes, unfortunately, COMMIT_EDITMSG, i.e. commit messages. However, spell checking is *quite* useful when writing commit messages... And since the user hardly ever opens any file inside .git (apart from commit messages, the config, and sometimes interactive rebase's todo lists), there is really not much harm in *not* ignoring .git/. The default also ignores `node_modules/`, but that does not apply to Git, so let's skip ignoring that, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: add a dictionary for cSpellLibravatar Johannes Schindelin1-1/+168
The quite useful cSpell extension allows VS Code to have "squiggly" lines under spelling mistakes. By default, this would add too much clutter, though, because so much of Git's source code uses words that would trigger cSpell. Let's add a few words to make the spell checking more useful by reducing the number of false positives. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: use 8-space tabs, no trailing ws, etc for Git's source codeLibravatar Johannes Schindelin1-0/+8
This adds a couple settings for the .c/.h files so that it is easier to conform to Git's conventions while editing the source code. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: wrap commit messages at column 72 by defaultLibravatar Johannes Schindelin1-0/+4
When configuring VS Code as core.editor (via `code --wait`), we really want to adhere to the Git conventions of wrapping commit messages. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: only overwrite C/C++ settingsLibravatar Johannes Schindelin1-3/+20
The C/C++ settings are special, as they are the only generated VS Code configurations that *will* change over the course of Git's development, e.g. when a new constant is defined. Therefore, let's only update the C/C++ settings, also to prevent user modifications from being overwritten. Ideally, we would keep user modifications in the C/C++ settings, but that would require parsing JSON, a task for which a Unix shell script is distinctly unsuited. So we write out .new files instead, and warn the user if they may want to reconcile their changes. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30vscode: hard-code a couple definesLibravatar Johannes Schindelin1-1/+13
Sadly, we do not get all of the definitions via ALL_CFLAGS. Some defines are passed to GCC *only* when compiling specific files, such as git.o. Let's just hard-code them into the script for the time being. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30contrib: add a script to initialize VS Code configurationLibravatar Johannes Schindelin3-0/+180
VS Code is a lightweight but powerful source code editor which runs on your desktop and is available for Windows, macOS and Linux. Among other languages, it has support for C/C++ via an extension, which offers to not only build and debug the code, but also Intellisense, i.e. code-aware completion and similar niceties. This patch adds a script that helps set up the environment to work effectively with VS Code: simply run the Unix shell script contrib/vscode/init.sh, which creates the relevant files, and open the top level folder of Git's source code in VS Code. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18Merge branch 'tb/grep-column'Libravatar Junio C Hamano2-3/+11
"git grep" learned the "--column" option that gives not just the line number but the column number of the hit. * tb/grep-column: contrib/git-jump/git-jump: jump to exact location grep.c: add configuration variables to show matched option builtin/grep.c: add '--column' option to 'git-grep(1)' grep.c: display column number of first match grep.[ch]: extend grep_opt to allow showing matched column grep.c: expose {,inverted} match column in match_line() Documentation/config.txt: camel-case lineNumber for consistency
2018-07-16coccinelle: update commit.cocciLibravatar Derrick Stolee1-1/+1
A recent patch series renamed the get_commit_tree_from_graph method but forgot to update the coccinelle script that exempted it from rules regarding accesses to 'maybe_tree'. This fixes that oversight to bring the coccinelle scripts back to a good state. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-28Merge branch 'tz/cred-netrc-cleanup'Libravatar Junio C Hamano3-6/+11
Build and test procedure for netrc credential helper (in contrib/) has been updated. * tz/cred-netrc-cleanup: git-credential-netrc: make "all" default target of Makefile git-credential-netrc: fix exit status when tests fail git-credential-netrc: use in-tree Git.pm for tests git-credential-netrc: minor whitespace cleanup in test script
2018-06-28Merge branch 'nd/completion-negation'Libravatar Junio C Hamano1-24/+37
Continuing with the idea to programmatically enumerate various pieces of data required for command line completion, the codebase has been taught to enumerate options prefixed with "--no-" to negate them. * nd/completion-negation: completion: collapse extra --no-.. options completion: suppress some -no- options parse-options: option to let --git-completion-helper show negative form
2018-06-25Merge branch 'ls/complete-remote-update-names'Libravatar Junio C Hamano1-1/+1
"git remote update" can take both a single remote nickname and a nickname for remote groups, and the completion script (in contrib/) has been taught about it. * ls/complete-remote-update-names: completion: complete remote names too
2018-06-25Merge branch 'nd/complete-config-vars'Libravatar Junio C Hamano1-333/+29
Continuing with the idea to programatically enumerate various pieces of data required for command line completion, teach the codebase to report the list of configuration variables subcommands care about to help complete them. * nd/complete-config-vars: completion: complete general config vars in two steps log-tree: allow to customize 'grafted' color completion: support case-insensitive config vars completion: keep other config var completion in camelCase completion: drop the hard coded list of config vars am: move advice.amWorkDir parsing back to advice.c advice: keep config name in camelCase in advice_config[] fsck: produce camelCase config key names help: add --config to list all available config fsck: factor out msg_id_info[] lazy initialization code grep: keep all colors in an array Add and use generic name->id mapping code for color slot parsing
2018-06-22contrib/git-jump/git-jump: jump to exact locationLibravatar Taylor Blau2-3/+11
Take advantage of 'git-grep(1)''s new option, '--column' in order to teach Peff's 'git-jump' script how to jump to the correct column for any given match. 'git-grep(1)''s output is in the correct format for Vim's jump list, so no additional cleanup is necessary. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-18git-credential-netrc: make "all" default target of MakefileLibravatar Todd Zullinger1-0/+3
Running "make" in contrib/credential/netrc should run the "all" target rather than the "test" target. Add an empty "all::" target like most of our other Makefiles. Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-18Merge branch 'ab/cred-netrc-no-autodie'Libravatar Junio C Hamano1-1/+0
Hotfix for contrib/ stuff broken by this cycle. * ab/cred-netrc-no-autodie: git-credential-netrc: remove use of "autodie"
2018-06-18git-credential-netrc: fix exit status when tests failLibravatar Luis Marsano1-1/+3
Signed-off-by: Luis Marsano <luis.marsano@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-18git-credential-netrc: use in-tree Git.pm for testsLibravatar Luis Marsano2-2/+2
The netrc test.pl script calls git-credential-netrc which imports the Git module. Pass GITPERLLIB to git-credential-netrc via PERL5LIB to ensure the in-tree Git module is used for testing. Signed-off-by: Luis Marsano <luis.marsano@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-18git-credential-netrc: minor whitespace cleanup in test scriptLibravatar Todd Zullinger1-4/+4
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-13Merge branch 'sg/completion-zsh-workaround'Libravatar Junio C Hamano2-2/+5
Work around zsh segfaulting when loading git-completion.zsh * sg/completion-zsh-workaround: completion: correct zsh detection when run from git-completion.zsh
2018-06-13git-credential-netrc: remove use of "autodie"Libravatar Ævar Arnfjörð Bjarmason1-1/+0
The "autodie" module was added in Perl 5.10.1, but our INSTALL document says "version 5.8 or later is needed". As discussed in <87efhfvxzu.fsf@evledraar.gmail.com> this script is in contrib/, so we might not want to apply that policy, however in this case "autodie" was recently added as a "gratuitous safeguard" in 786ef50a23 ("git-credential-netrc: accept gpg option", 2018-05-12) (see <CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>). Looking at it more carefully the addition of "autodie" inadvertently introduced a logic error, since having it is equivalent to this patch: @@ -245,10 +244,10 @@ sub load_netrc { if ($gpgmode) { my @cmd = ($options{'gpg'}, qw(--decrypt), $file); log_verbose("Using GPG to open $file: [@cmd]"); - open $io, "-|", @cmd; + open $io, "-|", @cmd or die "@cmd: $!"; } else { log_verbose("Opening $file..."); - open $io, '<', $file; + open $io, '<', $file or die "$file: $!$!; } # nothing to do if the open failed (we log the error later) As shown in the context the intent of that code is not do die but to log the error later. Per my reading of the file this was the only thing autodie was doing in this file (there was no other code it altered). So let's remove it, both to fix the logic error and to get rid of the dependency. 1. <87efhfvxzu.fsf@evledraar.gmail.com> (https://public-inbox.org/git/87efhfvxzu.fsf@evledraar.gmail.com/) 2. <CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com> (https://public-inbox.org/git/CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com/) Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-12completion: correct zsh detection when run from git-completion.zshLibravatar SZEDER Gábor2-2/+5
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached --options, 2018-04-18) worked around a bug in bash's "set" builtin on MacOS by using compgen instead. It was careful to avoid breaking zsh by guarding this workaround with if [[ -n ${ZSH_VERSION-}} ]] Alas, this interacts poorly with git-completion.zsh's bash emulation: ZSH_VERSION='' . "$script" Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell variable to detect whether git-completion.bash is being sourced from git-completion.zsh. This way, the zsh variant is used both when run from zsh directly and when run via git-completion.zsh. Reproduction recipe: 1. cd git/contrib/completion && cp git-completion.zsh _git 2. Put the following in a new ~/.zshrc file: autoload -U compinit; compinit autoload -U bashcompinit; bashcompinit fpath=(~/src/git/contrib/completion $fpath) 3. Open zsh and "git <TAB>". With this patch: Triggers nice git-completion.bash based tab completion Without: contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX zsh:12: command not found: ___main zsh:15: _default: function definition file not found _dispatch:70: bad math expression: operand expected at `/usr/bin/g...' Segmentation fault Reported-by: Rick van Hattem <wolph@wol.ph> Reported-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11completion: collapse extra --no-.. optionsLibravatar Nguyễn Thái Ngọc Duy1-0/+23
The commands that make use of --git-completion-helper feature could now produce a lot of --no-xxx options that a command can take. This in many case could nearly double the amount of completable options, using more screen estate and also harder to search for the wanted option. This patch attempts to mitigate that by collapsing extra --no- options, the ones that are added by --git-completion-helper and not in original struct option arrays. The "--no-..." option will be displayed in this case to hint about more options, e.g. > ~/w/git $ git clone -- --bare --origin= --branch= --progress --checkout --quiet --config= --recurse-submodules --depth= --reference= --dissociate --reference-if-able= --filter= --separate-git-dir= --hardlinks --shallow-exclude= --ipv4 --shallow-since= --ipv6 --shallow-submodules --jobs= --shared --local --single-branch --mirror --tags --no-... --template= --no-checkout --upload-pack= --no-hardlinks --verbose --no-tags and when you complete it with --no-<tab>, all negative options will be presented: > ~/w/git $ git clone --no- --no-bare --no-quiet --no-branch --no-recurse-submodules --no-checkout --no-reference --no-config --no-reference-if-able --no-depth --no-separate-git-dir --no-dissociate --no-shallow-exclude --no-filter --no-shallow-since --no-hardlinks --no-shallow-submodules --no-ipv4 --no-shared --no-ipv6 --no-single-branch --no-jobs --no-tags --no-local --no-template --no-mirror --no-upload-pack --no-origin --no-verbose --no-progress Corner case: to make sure that people will never accidentally complete the fake option "--no-..." there must be one real --no- in the first complete listing even if it's not from the original struct option. PS. This could could be made simpler with ";&" to fall through from "--no-*" block and share the code but ";&" is not available on bash-3 (i.e. Mac) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-01Merge branch 'pa/import-tars-long-names'Libravatar Junio C Hamano1-2/+29
The import-tars script (in contrib/) has been taught to handle tarballs with overly long paths that use PAX extended headers. * pa/import-tars-long-names: import-tars: read overlong names from pax extended header
2018-06-01Merge branch 'nd/command-list'Libravatar Junio C Hamano1-132/+16
The list of commands with their various attributes were spread across a few places in the build procedure, but it now is getting a bit more consolidated to allow more automation. * nd/command-list: completion: allow to customize the completable command list completion: add and use --list-cmds=alias completion: add and use --list-cmds=nohelpers Move declaration for alias.c to alias.h completion: reduce completable command list completion: let git provide the completable command list command-list.txt: documentation and guide line help: use command-list.txt for the source of guides help: add "-a --verbose" to list all commands with synopsis git: support --list-cmds=list-<category> completion: implement and use --list-cmds=main,others git --list-cmds: collect command list in a string_list git.c: convert --list-* to --list-cmds=* Remove common-cmds.h help: use command-list.h for common command list generate-cmds.sh: export all commands to command-list.h generate-cmds.sh: factor out synopsis extract code
2018-06-01completion: complete remote names tooLibravatar Łukasz Stelmach1-1/+1
"git remote update" accepts both groups and single remotes. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-30Merge branch 'lm/credential-netrc'Libravatar Junio C Hamano7-50/+135
Update credential-netrc helper (in contrib/) to allow customizing the GPG used to decrypt the encrypted .netrc file. * lm/credential-netrc: git-credential-netrc: accept gpg option git-credential-netrc: adapt to test framework for git
2018-05-30Merge branch 'sg/complete-paths'Libravatar Junio C Hamano2-26/+200
Command line completion (in contrib/) learned to complete pathnames for various commands better. * sg/complete-paths: t9902-completion: exercise __git_complete_index_file() directly completion: don't return with error from __gitcomp_file_direct() completion: fill COMPREPLY directly when completing paths completion: improve handling quoted paths in 'git ls-files's output completion: remove repeated dirnames with 'awk' during path completion t9902-completion: ignore COMPREPLY element order in some tests completion: use 'awk' to strip trailing path components completion: let 'ls-files' and 'diff-index' filter matching paths completion: improve handling quoted paths on the command line completion: support completing non-ASCII pathnames completion: simplify prefix path component handling during path completion completion: move __git_complete_index_file() next to its helpers t9902-completion: add tests demonstrating issues with quoted pathnames
2018-05-29completion: complete general config vars in two stepsLibravatar Nguyễn Thái Ngọc Duy1-2/+7
There are 581 config variables as of now when you do "git config <tab>" which can fill up a few screens and is not very helpful when you have to look through columns of text to find what you want. This patch instead shows you only first level when you do git config <tab> There are 78 items, which use up 8 rows in my screen. Compared to screens of text, it's pretty good. Once you have chosen you first level, e.g. color: git config color.<tab> will show you all color.* This is not a new idea. branch.* and remote.* completion already does this for second and third levels. For those variables, you'll need to <tab> three times to get full variable name. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29completion: support case-insensitive config varsLibravatar Nguyễn Thái Ngọc Duy1-1/+9
Config variables are case-insensitive but this case/esac construct is case-sensitive by default. For bash v4, it'll be easy. For platforms that are stuck with older versions, we need an external command, but that is not that critical. And where this additional overhead matters the most is Windows, but luckily Git for Windows ships with Bash v4. Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29completion: keep other config var completion in camelCaseLibravatar Nguyễn Thái Ngọc Duy1-6/+6
The last patch makes "git config <tab>" shows camelCase names because that's what's in the source: config.txt. There are still a couple manual var completion in this code. Let's make them follow the naming convention as well. In theory we could automate this part too because we have the information. But let's stick to one step at a time and leave this for later. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29completion: drop the hard coded list of config varsLibravatar Nguyễn Thái Ngọc Duy1-326/+9
The new help option --config-for-completion is a machine friendlier version of --config where all the placeholders and wildcards are dropped, leaving only the good, completable prefixes for git-completion.bash to consume. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29Merge branch 'nd/command-list' into nd/complete-config-varsLibravatar Junio C Hamano1-132/+16
* nd/command-list: completion: allow to customize the completable command list completion: add and use --list-cmds=alias completion: add and use --list-cmds=nohelpers Move declaration for alias.c to alias.h completion: reduce completable command list completion: let git provide the completable command list command-list.txt: documentation and guide line help: use command-list.txt for the source of guides help: add "-a --verbose" to list all commands with synopsis git: support --list-cmds=list-<category> completion: implement and use --list-cmds=main,others git --list-cmds: collect command list in a string_list git.c: convert --list-* to --list-cmds=* Remove common-cmds.h help: use command-list.h for common command list generate-cmds.sh: export all commands to command-list.h generate-cmds.sh: factor out synopsis extract code
2018-05-29parse-options: option to let --git-completion-helper show negative formLibravatar Nguyễn Thái Ngọc Duy1-24/+14
When 7fb6aefd2a (Merge branch 'nd/parseopt-completion' - 2018-03-14) is merged, the completion for negative form is left out because the series is alread long and it could be done in a follow up series. This is it. --git-completion-helper now provides --no-xxx so that git-completion.bash can drop the extra custom --no-xxx in the script. It adds a lot more --no-xxx than what's current provided by the git-completion.bash script. We'll trim that down later. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-24import-tars: read overlong names from pax extended headerLibravatar Pedro Alvarez Piedehierro1-2/+29
Importing gcc tarballs[1] with import-tars script (in contrib) fails when hitting a pax extended header. Make sure we always read the extended attributes from the pax entries, and store the 'path' value if found to be used in the next ustar entry. The code to parse pax extended headers was written consulting the Pax Pax Interchange Format documentation [2]. [1] http://ftp.gnu.org/gnu/gcc/gcc-7.3.0/gcc-7.3.0.tar.xz [2] https://www.freebsd.org/cgi/man.cgi?manpath=FreeBSD+8-current&query=tar&sektion=5 Signed-off-by: Pedro Alvarez <palvarez89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-23Merge branch 'fg/completion-external'Libravatar Junio C Hamano1-2/+9
The command line completion mechanism (in contrib/) learned to load custom completion file for "git $command" where $command is a custom "git-$command" that the end user has on the $PATH when using newer version of bash. * fg/completion-external: completion: load completion file for external subcommand
2018-05-23Merge branch 'nd/completion-aliasfiletype-typofix'Libravatar Junio C Hamano1-1/+1
Typofix. * nd/completion-aliasfiletype-typofix: completion: fix misspelled config key aliasesfiletype