summaryrefslogtreecommitdiff
path: root/contrib
AgeCommit message (Collapse)AuthorFilesLines
2008-10-31bash completion: add doubledash to "git show"Libravatar Markus Heidelberg1-0/+2
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-18contrib: update packinfo.pl to not use dashed commandsLibravatar Dan McGee1-7/+7
Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-16Typo "does not exists" when git remote update remote.Libravatar Mikael Magnusson1-1/+1
2008-10-05bash: remove fetch, push, pull dashed form leftoversLibravatar SZEDER Gábor1-27/+9
We don't provide complation for git-commands in dashed form anymore, so there is no need to keep those cases. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Tested-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-22Use dashless git commands in setgitperms.perlLibravatar Todd Zullinger1-2/+2
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-19completion: git commit should list --interactiveLibravatar Eric Raible1-1/+1
Signed-off-by: Eric Raible <raible@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03bash completion: Hide more plumbing commandsLibravatar Petr Baudis1-0/+10
git <tab><tab> still shows way too many commands, some of them are clearly plumbing. This patch hides the plumbing commands liberally (that is, in special cases, users still might want to call one of the hidden commands, a *normal* workflow should never involve these, though - and if it does, we have a UI problem anyway). Signed-off-by: Petr Baudis <pasky@suse.cz> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-24Clean up the git-p4 documentationLibravatar Simon Hausmann1-31/+38
This patch massages the documentation a bit for improved readability and cleans it up from outdated options/commands. Signed-off-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-22git-p4: Fix one-liner in p4_write_pipe function.Libravatar Tor Arvid Lund1-1/+1
The function built a p4 command string via the p4_build_cmd function, but ignored the result. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-22Completion: add missing '=' for 'diff --diff-filter'Libravatar Eric Raible1-1/+1
Signed-off-by: Eric Raible <raible@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-20completion: find out supported merge strategies correctlyLibravatar Junio C Hamano1-6/+8
"git-merge" is a binary executable these days, and looking for assignment to $all_strategies variable with grep/sed does not work well. When asked for an unknown strategy, pre-1.6.0 and post-1.6.0 "git merge" commands respectively say: $ $HOME/git-snap-v1.5.6.5/bin/git merge -s help available strategies are: recur recursive octopus resolve stupid ours subtree $ $HOME/git-snap-v1.6.0/bin/git merge -s help Could not find merge strategy 'help'. Available strategies are: recursive octopus resolve ours subtree. both on their standard error stream. We can use this to learn what strategies are supported. The sed script is written in such a way that it catches both old and new message styles ("Available" vs "available", and the full stop at the end). It also allows future versions of "git merge" to line-wrap the list of strategies, and add extra comments, like this: $ $HOME/git-snap-v1.6.1/bin/git merge -s help Could not find merge strategy 'help'. Available strategies are: blame recursive octopus resolve ours subtree. Also you have custom strategies: theirs Make sure you spell strategy names correctly. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-17Merge branch 'ak/p4'Libravatar Junio C Hamano2-28/+124
* ak/p4: Utilise our new p4_read_pipe and p4_write_pipe wrappers Add p4 read_pipe and write_pipe wrappers Put in the two other configuration elements found in the source Put some documentation in about the parameters that have been added Move git-p4.syncFromOrigin into a configuration parameters section Consistently use 'git-p4' for the configuration entries If the user has configured various parameters, use them. Switch to using 'p4_build_cmd' If we are in verbose mode, output what we are about to run (or return) Add a single command that will be used to construct the 'p4' command Utilise the new 'p4_system' function. Have a command that specifically invokes 'p4' (via system) Utilise the new 'p4_read_pipe_lines' command Create a specific version of the read_pipe_lines command for p4 invocations Conflicts: contrib/fast-import/git-p4
2008-08-16git-p4: chdir now properly sets PWD environment variable in msysGitLibravatar Robert Blum1-4/+9
P4 on Windows expects the PWD environment variable to be set to the current working dir, but os.chdir in python doesn't do so. Signed-off-by: Robert Blum <rob.blum@gmail.com> Acked-by: Simon Hausmann <simon@lst.de> Acked-by: Han-Wen Nienhuys <hanwen@xs4all.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-16bash-completion: Add non-command git help files to bash-completionLibravatar Marcus Griep1-1/+5
Git allows access to the gitattributes man page via `git help attributes`, but this is not discoverable via the bash-completion mechanism. This patch adds all current non-command man pages to the completion candidate list. Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14Utilise our new p4_read_pipe and p4_write_pipe wrappersLibravatar Anand Kumria1-3/+3
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14Add p4 read_pipe and write_pipe wrappersLibravatar Anand Kumria1-0/+7
Two additional wrappers to cover 3 places where we utilise p4 in piped form. Found by Tor Arvid Lund. Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14bash completion: Add '--merge' long option for 'git log'Libravatar Lee Marlow1-0/+1
Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14bash completion: Add completion for 'git mergetool'Libravatar Lee Marlow1-0/+20
The --tool= long option to "git mergetool" can be completed with: kdiff3 tkdiff meld xxdiff emerge vimdiff gvimdiff ecmerge opendiff Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14bash completion: 'git apply' should use 'fix' not 'strip'Libravatar Eric Raible1-1/+1
Bring completion up to date with the man page. Signed-off-by: Eric Raible <raible@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Put in the two other configuration elements found in the sourceLibravatar Anand Kumria1-0/+8
I am not entirely clear what these parameters do but felt it useful to call them out in the documentation. Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Put some documentation in about the parameters that have been addedLibravatar Anand Kumria1-0/+32
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Move git-p4.syncFromOrigin into a configuration parameters sectionLibravatar Anand Kumria1-12/+16
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Consistently use 'git-p4' for the configuration entriesLibravatar Anand Kumria1-1/+1
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11If the user has configured various parameters, use them.Libravatar Anand Kumria1-1/+23
Some repositories require authentication and access to certain hosts. Allow git-p4 to pull this information from the configuration Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Switch to using 'p4_build_cmd'Libravatar Anand Kumria1-7/+3
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11If we are in verbose mode, output what we are about to run (or return)Libravatar Anand Kumria1-0/+2
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Add a single command that will be used to construct the 'p4' commandLibravatar Anand Kumria1-0/+11
Rather than having three locations where the 'p4' command is built up, refactor this into the one place. This will, eventually, allow us to have one place where we modify the evironment or pass extra command-line options to the 'p4' binary. Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Utilise the new 'p4_system' function.Libravatar Anand Kumria1-9/+9
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Have a command that specifically invokes 'p4' (via system)Libravatar Anand Kumria1-0/+7
Similiar to our 'p4_read_pipe_lines' command, we can isolate specific changes to the invocation method in the one location with this change. Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Utilise the new 'p4_read_pipe_lines' commandLibravatar Anand Kumria1-2/+2
Now that we have the new command, we can utilise it and then eventually, isolate any changes required to the one place. Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Create a specific version of the read_pipe_lines command for p4 invocationsLibravatar Anand Kumria1-0/+7
This will make it easier to isolate changes to how 'p4' is invoked (whether with parameters or not, etc.). Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-08bash: remove redundant check for 'git stash apply' optionsLibravatar SZEDER Gábor1-1/+1
It will never trigger anyway because of the first check, and even if it would, it would not offer the command line option. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git mv'Libravatar Lee Marlow1-0/+13
Add completions for all long options specified in the docs --dry-run Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git ls-files'Libravatar Lee Marlow1-0/+21
Add completions for all long options specified in the docs --cached --deleted --modified --others --ignored --stage --directory --no-empty-directory --unmerged --killed --exclude= --exclude-from= --exclude-per-directory= --exclude-standard --error-unmatch --with-tree= --full-name --abbrev --ignored --exclude-per-directory Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git archive'Libravatar Lee Marlow1-0/+24
Add completions for all long options specified in the docs --format= --list --verbose --prefix= --remote= --exec= The --format= long option can be completed with available formats and the --remote= can be completed with defined remote repositories. Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: More completions for 'git stash'Libravatar Lee Marlow1-1/+11
Add branch subcommand to completions and USAGE for git-stash.sh. Complete stash names for show, apply, drop, pop, and branch. Add "--index" long option for apply. Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git revert'Libravatar Lee Marlow1-0/+13
Add completions for all long options specified in the docs --edit --mainline --no-edit --no-commit --signoff Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git init'Libravatar Lee Marlow1-0/+19
Add completions for all long options specified in the docs --quiet --bare --template= --shared --shared={false|true|umask|group|all|world|everybody} Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git clean'Libravatar Lee Marlow1-0/+15
Add completions for all long options specified in the docs --dry-run --quiet Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: Add completion for 'git clone'Libravatar Lee Marlow1-0/+26
Add completions for all long options specified in the docs --local --no-hardlinks --shared --reference --quiet --no-checkout --bare --mirror --origin --upload-pack --template= --depth Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-04bash completion: Add completion for 'git grep'Libravatar Lee Marlow1-0/+24
Add completions for all long options specified in the docs --cached --text --ignore-case --word-regexp --invert-match --full-name --extended-regexp --basic-regexp --fixed-strings --files-with-matches --name-only --files-without-match --count --and --or --not --all-match Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-02bash completion: Add more long options for 'git log'Libravatar Lee Marlow1-0/+1
Options added: --parents --children --full-history Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-02bash completion: remove unused function _git_diff_treeLibravatar Lee Marlow1-5/+0
completion for git diff-tree was removed in 5cfb4fe Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30Replace uses of "git-var" with "git var"Libravatar Todd Zullinger2-4/+4
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-27bash completion: Add completion for 'git help'Libravatar Lee Marlow1-7/+39
Rename cached __git_commandlist to __git_porcelain_commandlist and add __git_all_commandlist that only filters out *--* helpers. Completions for 'git help' will use the __git_all_commandlist, while the __git_porcelain_commandlist is used for git command completion. Users who actually read man pages may want to see help for plumbing commands. Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-27bash completion: Add long options for 'git describe'Libravatar Thomas Rast1-0/+9
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-24bash: offer only paths after '--' for 'git checkout'Libravatar SZEDER Gábor1-0/+2
Commit d773c631 (bash: offer only paths after '--', 2008-07-08) did the same for several other git commands, but 'git checkout' went unnoticed. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23git-completion.bash: provide completion for 'show-branch'Libravatar Thomas Rast1-1/+17
It previously used the same as 'log', but the options are quite different and the arguments must be single refs (or globs). Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23bash completion: Add long options for 'git rm'Libravatar Lee Marlow1-0/+15
Options added: --cached --dry-run --ignore-unmatch --quiet Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23svnimport: newer libsvn wants us to ask for the root with "", not "/"Libravatar P. Christeas1-1/+1
In r27729, libsvn introduced an assert which explicitly forbids searching the tree at "/". Luckily enough, it still accepts an empty string "" as the starting point. http://svn.collab.net/viewvc/svn/trunk/subversion/libsvn_ra/ra_loader.c?r1=27653&r2=27729 Tested against libsvn0-1.5.0-4mdv2009.0 (needs the fix), libsvn0-1.4.6-5mdv2008.1 (works anyway) Signed-off-by: P. Christeas <p_christ@hol.gr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 13:04:21 +0000