| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code clean-up.
* rs/use-xopen-in-index-pack:
index-pack: use xopen in init_thread
|
|
Support an arbitrary file descriptor expression in the semantic patch
for replacing open+die_errno with xopen, not just an identifier, and
apply it. This makes the error message at the single affected place
more consistent and reduces code duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error diagnostics improvement.
* rs/xopen-reports-open-failures:
use xopen() to handle fatal open(2) failures
xopen: explicitly report creation failures
|
|
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
|
|
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
|
|
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cleanup of old compat wrappers in bash completion caused a
regression on tcsh completion that still uses them.
Let's update the tcsh call site as well for addressing it.
Fixes: 441ecdab37fe ("completion: bash: remove old compat wrappers")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise options of commands like 'for-each-ref' are not completed.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
|
|
Update the location of system-side configuration file on Windows.
* js/gfw-system-config-loc-fix:
config: normalize the path of the system gitconfig
cmake(windows): set correct path to the system Git config
mingw: move Git for Windows' system config where users expect it
|
|
CMake update.
* mr/cmake:
cmake: add warning for ignored MSGFMT_EXE
cmake: create compile_commands.json by default
cmake: add knob to disable vcpkg
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test code clean-up.
* ar/test-code-cleanup:
t: fix whitespace around &&
|
|
Recent update to completion script (in contrib/) broke those who
use the __git_complete helper to define completion to their custom
command.
* fw/complete-cmd-idx-fix:
completion: bash: fix late declaration of __git_cmd_idx
|
|
Remove multimail from contrib/
* js/no-more-multimail:
multimail: stop shipping a copy
|
|
Update "git subtree" to work better on Windows.
* js/subtree-on-windows-fix:
subtree: fix assumption about the directory separator
subtree: fix the GIT_EXEC_PATH sanity check to work on Windows
|
|
The command line completion (in contrib/) learned that "git diff"
takes the "--anchored" option.
* tb/complete-diff-anchored:
completion: add --anchored to diff's options
|
|
Currently, when Git for Windows is built with CMake, the system Git config is
expected in a different location than when building via `make`: the former
expects it to be in `<runtime-prefix>/mingw64/etc/gitconfig`, the latter in
`<runtime-prefix>/etc/gitconfig`.
Because of this, things like `git clone` do not work correctly (because cURL is
no longer able to find its certificate bundle that it needs to validate HTTPS
certificates). See the full bug report and discussion here:
https://github.com/git-for-windows/git/issues/3071#issuecomment-789261386.
This commit aligns the CMake-based build by mimicking what is already done in
`config.mak.uname`.
This closes https://github.com/git-for-windows/git/issues/3071.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent update to contrib/completion/git-completion.bash causes bash to fail
auto complete custom commands that are wrapped with __git_func_wrap. Declaring
__git_cmd_idx=0 inside __git_func_wrap resolves the issue.
Signed-off-by: Fabian Wermelinger <fabianw@mavt.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, both forward and backslash are valid separators. In
22d550749361 (subtree: don't fuss with PATH, 2021-04-27), however, we
added code that assumes that it can only be the forward slash.
Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 22d550749361 (subtree: don't fuss with PATH, 2021-04-27), `git
subtree` was broken thoroughly on Windows.
The reason is that it assumes Unix semantics, where `PATH` is
colon-separated, and it assumes that `$GIT_EXEC_PATH:` is a verbatim
prefix of `$PATH`. Neither are true, the latter in particular because
`GIT_EXEC_PATH` is a Windows-style path, while `PATH` is a Unix-style
path list.
Let's make extra certain that `$GIT_EXEC_PATH` and the first component
of `$PATH` refer to different entities before erroring out.
We do that by using the `test <path1> -ef <path2>` command that verifies
that the inode of `<path1>` and of `<path2>` is the same.
Sadly, this construct is non-portable, according to
https://pubs.opengroup.org/onlinepubs/009695399/utilities/test.html.
However, it does not matter in practice because we still first look
whether `$GIT_EXEC_PREFIX` is string-identical to the first component of
`$PATH`. This will give us the expected result everywhere but in Git for
Windows, and Git for Windows' own Bash _does_ handle the `-ef` operator.
Just in case that we _do_ need to show the error message _and_ are
running in a shell that lacks support for `-ef`, we simply suppress the
error output for that part.
This fixes https://github.com/git-for-windows/git/issues/3260
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make sense to attempt to set MSGFMT_EXE when NO_GETTEXT is
configured, as such add a check for NO_GETTEXT before attempting to set
it.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users have expressed interest in a more "batteries included" way of
building via CMake[1], and a big part of that is providing easier access
to tooling external tools.
A straightforward way to accomplish this is to make it as simple as
possible is to enable the generation of the compile_commands.json file,
which is supported by many tools such as: clang-tidy, clang-format,
sourcetrail, etc.
This does come with a small run-time overhead during the configuration
step (~6 seconds on my machine):
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=TRUE
real 1m9.840s
user 0m0.031s
sys 0m0.031s
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=FALSE
real 1m3.195s
user 0m0.015s
sys 0m0.015s
This seems like a small enough price to pay to make the project more
accessible to newer users. Additionally there are other large projects
like llvm [2] which has had this enabled by default for >6 years at the
time of this writing, and no real negative consequences that I can find
with my search-skills.
NOTE: That the compile_commands.json is currently produced only when
using the Ninja and Makefile generators. See The CMake documentation[3]
for more info.
1: https://lore.kernel.org/git/CAOjrSZusMSvs7AS-ZDsV8aQUgsF2ZA754vSDjgFKMRgi_oZAWw@mail.gmail.com/
2: https://github.com/llvm/llvm-project/commit/2c5712051b31b316a9fc972f692579bd8efa6e67
3: https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When building on windows users have the option to use vcpkg to provide
the dependencies needed to compile. Previously, this was used only when
using the Visual Studio generator which was not ideal because:
- Not all users who want to use vcpkg use the Visual Studio
generators.
- Some versions of Visual Studio 2019 moved away from using the
VS 2019 generator by default, making it impossible for Visual
Studio to configure the project in the likely event that it couldn't
find the dependencies.
- Inexperienced users of CMake are very likely to get tripped up by
the errors caused by a lack of vcpkg, making the above bullet point
both annoying and hard to debug.
As such, let's make using vcpkg the default on windows. Users who want
to avoid using vcpkg can disable it by passing -DNO_VCPKG=TRUE.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The multimail project is developed independently and has its own project
page. Traditionally, we shipped a copy in contrib/.
However, such a copy is prone to become stale, and users are much better
served to be directed to the actual project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t'`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This flag was introduced in 2477ab2e (diff: support anchoring line(s),
2017-11-27) but back then, the bash completion script did not learn
about the new flag. Add it.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "simple-ipc" did not compile without pthreads support, but the
build procedure was not properly account for it.
* jh/simple-ipc-sans-pthread:
simple-ipc: correct ifdefs when NO_PTHREADS is defined
|
|
Simple IPC always requires threads (in addition to various
platform-specific IPC support). Fix the ifdefs in the Makefile
to define SUPPORTS_SIMPLE_IPC when appropriate.
Previously, the Unix version of the code would only verify that
Unix domain sockets were available.
This problem was reported here:
https://lore.kernel.org/git/YKN5lXs4AoK%2FJFTO@coredump.intra.peff.net/T/#m08be8f1942ea8a2c36cfee0e51cdf06489fdeafc
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bash prompt script (in contrib/) did not work under "set -u".
* en/prompt-under-set-u:
git-prompt: work under set -u
|
|
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
|
|
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
|
|
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
|
|
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
|
|
The command line completion (in contrib/) for "git stash" has been
updated.
* dl/complete-stash:
git-completion.bash: use __gitcomp_builtin() in _git_stash()
git-completion.bash: extract from else in _git_stash()
git-completion.bash: pass $__git_subcommand_idx from __git_main()
|
|
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
|
|
Don't silently ignore a flag that's invalid for a given subcommand. The
user expected it to do something; we should tell the user that they are
mistaken, instead of surprising the user.
It could be argued that this change might break existing users. I'd
argue that those existing users are already broken, and they just don't
know it. Let them know that they're broken.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git subtree split' lets you specify a rev other than HEAD. 'git push'
lets you specify a mapping between a local thing and a remot ref. So
smash those together, and have 'git subtree push' let you specify which
local thing to run split on and push the result of that split to the
remote ref.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'push' does a 'split' internally, but it doesn't pass flags through to the
'split'. This is silly, if you need to pass flags to 'split', then it
means that you can't use 'push'!
So, have 'push' accept 'split' flags, and pass them through to 'split'.
Add tests for this by copying split's tests with minimal modification.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Besides being a genuinely useful thing to do, this also just makes sense
and harmonizes which flags may be used when. `git subtree split
--rejoin` amounts to "automatically go ahead and do a `git subtree
merge` after doing the main `git subtree split`", so it's weird and
arbitrary that you can't pass `--squash` to `git subtree split --rejoin`
like you can `git subtree merge`. It's weird that `git subtree split
--rejoin` inherits `git subtree merge`'s `--message` but not `--squash`.
Reconcile the situation by just having `split --rejoin` actually just
call `merge` internally (or call `add` instead, as appropriate), so it
can get access to the full `merge` behavior, including `--squash`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just went through the docs looking for anything inaccurate or that can
be improved.
In the '-h' text, in the man page synopsis, and in the man page
description: Normalize the ordering of the list of sub-commands: 'add',
'merge', 'split', 'pull', 'push'. This allows us to kinda separate the
lower-level add/merge/split from the higher-level pull/push.
'-h' text:
- correction: Indicate that split's arg is optional.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
man page:
- correction: State that all subcommands take options (it seemed to
indicate that only 'split' takes any options other than '-P').
- correction: 'split' only guarantees that the results are identical if
the flags are identical.
- correction: The flag is named '--ignore-joins', not '--ignore-join'.
- completeness: Clarify that 'push' always operates on HEAD, and that
'split' operates on HEAD if no local commit is given.
- clarity: In the description, when listing commands, repeat what their
arguments are. This way the reader doesn't need to flip back and
forth between the command description and the synopsis and the full
description to understand what's being said.
- clarity: In the <variables> used to give command arguments, give
slightly longer, descriptive names. Like <local-commit> instead of
just <commit>.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
- style: In the synopsis, list options before the subcommand. This
makes things line up and be much more readable when shown
non-monospace (such as in `make html`), and also more closely matches
other man pages (like `git-submodule.txt`).
- style: Use the correct syntax for indicating the options ([<options>]
instead of [OPTIONS]).
- style: In the synopsis, separate 'pull' and 'push' from the other
lower-level commands. I think this helps readability.
- style: Code-quote things in prose that seem like they should be
code-quoted, like '.gitmodules', flags, or full commands.
- style: Minor wording improvements, like more consistent mood (many
of the command descriptions start in the imperative mood and switch
to the indicative mode by the end). That sort of thing.
- style: Capitalize "ID".
- style: Remove the "This option is only valid for XXX command" remarks
from each option, and instead rely on the section headings.
- style: Since that line is getting edited anyway, switch "behaviour" to
American "behavior".
- style: Trim trailing whitespace.
`todo`:
- style: Trim trailing whitespace.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the $indent variable is just used to track how deeply we're
nested, and the debug log is indented by things like
debug " foo"
That is: The indentation-level is hard-coded. It used to be that the
code couldn't recurse, so the indentation level could be known
statically, so it made sense to just hard-code it in the
output. However, since 315a84f9aa ("subtree: use commits before rejoins
for splits", 2018-09-28), it can now recurse, and the debug log is
misleading.
So fix that. Indent according to $indent.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, debug output (triggered by passing '-d') and progress output
stomp on each other. The debug output is just streamed as lines to
stderr, and the progress output is sent to stderr as '%s\r'. When
writing to a file, it is awkward to read and difficult to distinguish
between the debug output and a progress line. When writing to a
terminal the debug lines hide progress lines.
So, when '-d' has been passed, spit out progress as 'progress: %s\n',
instead of as '%s\r', so that it can be detected, and so that the debug
lines don't overwrite the progress when written to a terminal.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
René Scharfe
Takashi Iwai
Felipe Contreras
Ævar Arnfjörð Bjarmason
Dennis Ameling
Fabian Wermelinger
Johannes Schindelin
Matthew Rogers
Andrei Rybak
David Aguilar
Thomas Braun
Jeff Hostetler
Elijah Newren
Đoàn Trần Công Danh
Sardorbek Imomaliev
Luke Shumaker