| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In b18ae14a8f6 (vcxproj: also link-or-copy builtins, 2019-07-29), we
started to copy or hard-link the built-ins as a post-build step of the
`git` project.
At the same time, we tried to copy or hard-link `git-remote-http.exe`,
but it is quite possible that it was not built at that time.
Let's move that latter task into a post-install step of the
`git-remote-http` project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default location for `.exe` files linked by Visual Studio depends on
the mode (debug vs release) and the architecture. Meaning: after a full
build, there is a `git.exe` in the top-level directory, but none of the
built-ins are linked..
When running a test script in Git Bash, it therefore would pick up the
wrong, say, `git-receive-pack.exe`: the one installed at the same time
as the Git Bash.
Absolutely not what we want. We want to have confidence that our test
covers the MSVC-built Git executables, and not some random stuff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The entire idea of generating the VS solution makes only sense if we
generate it via Continuous Integration; otherwise potential users would
still have to download the entire Git for Windows SDK.
If we pre-generate the Visual Studio solution, Git can be built entirely
within Visual Studio, and the test scripts can be run in a regular Git
for Windows (e.g. the Portable Git flavor, which does not include a full
GCC toolchain and therefore weighs only about a tenth of Git for
Windows' SDK).
So let's just add a target in the Makefile that can be used to generate
said solution; The generated files will then be committed so that they
can be pushed to a branch ready to check out by Visual Studio users.
To make things even more useful, we also generate and commit other files
that are required to run the test suite, such as templates and
bin-wrappers: with this, developers can run the test suite in a regular
Git Bash after building the solution in Visual Studio.
Note: for this build target, we do not actually need to initialize the
`vcpkg` system, so we don't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Based on the previous patches in this patch series that fixed the
generator for `.vcproj` files (which were used by Visual Studio prior to
2015 to define projects), this patch offers to generate project
definitions for neweer versions of Visual Studio (which use `.vcxproj`
files).
To that end, this patch copy-edits the generator of the `.vcproj`.
In addition, we now use the `vcpkg` system which allows us to build
Git's dependencies (e.g. curl, libexpat) conveniently. The support
scripts were introduced in the `jh/msvc` patch series, and with this
patch we initialize the `vcpkg` conditionally, in the `libgit` project's
`PreBuildEvent`. To allow for parallel building of the projects, we
therefore put `libgit` at the bottom of the project hierarchy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the recent changes to allow building with MSVC=1, we now pass the
/OPT:REF option to the compiler. This confuses the parser that wants to
turn the output of a dry run into project definitions for QMake and Visual
Studio:
Unhandled link option @ line 213: /OPT:REF at [...]
Let's just extend the code that passes through options that start with a
dash, so that it passes through options that start with a slash, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a dependency required for the non-smart HTTP backend.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's test suite shows tons of breakages unless Git is compiled
*without* NO_ICONV. That means, in turn, that we need to generate
build definitions *with* libiconv, which in turn implies that we
have to handle the -liconv option properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upon seeing the '-lcurl' option, point to the libcurl.lib.
While there, fix the elsif indentation.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One time too many did this developer call the `generate` script passing
a `--make-out=<PATH>` option that was happily ignored (because there
should be a space, not an equal sign, between `--make-out` and the
path).
And one time too many, this script not only ignored it but did not even
complain. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an option for capturing the output of the make dry-run used in
determining the msvc-build structure for easy debugging.
You can use the output of `--make-out <path>` in subsequent runs via the
`--in <path>` option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than swallowing the errors, it is better to have them in a file.
To make it obvious what this is about, use the file name
'msvc-build-makedryerrors.txt'.
Further, if the output is empty, simply delete that file. As we target
Git for Windows' SDK (which, unlike its predecessor msysGit, offers Perl
versions newer than 5.8), we can use the quite readable syntax `if -f -z
$ErrsFile` (available in Perl >=5.10).
Note that the file will contain the new values of the GIT_VERSION and
GITGUI_VERSION if they were generated by the make file. They are omitted
if the release is tagged and indentically defined in their respective
GIT_VERSION_GEN file DEF_VER variables.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's build contains steps to handle internationalization. This caused
hiccups in the parser used to generate QMake/Visual Studio project files.
As those steps are irrelevant in this context, let's just ignore them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The engine.pl script expects file names not to contain spaces. However,
paths with spaces are quite prevalent on Windows. Use shellwords() rather
than split() to parse them correctly.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error message talked about a "lib option", but it clearly referred
to a link option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Generators/ directory can contain spurious files such as editors'
backup files. Even worse, there could be .swp files which are not even
valid Perl scripts.
Let's just ignore anything but .pm files in said directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 4b623d8 (MSVC: link in invalidcontinue.obj for better POSIX
compatibility, 2014-03-29), invalidcontinue.obj is linked in the MSVC
build, but it was not parsed correctly by the buildsystem. Ignore it, as
it is known to Visual Studio and will be handled elsewhere.
Also only substitute filenames ending with .o when generating the
source .c filename, otherwise we would start to expect .cbj files to
generate .obj files (which are not generated by our build)...
In the future there may be source files that produce .obj files
so keep the two issues (.obj files with & without source files)
separate.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Duncan Smart <duncan.smart@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not necessary, and Visual Studio 2015 no longer supports it, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Visual Studio takes the first listed application/library as the default
startup project [1].
Detect the 'git' project and place it at the head of the project list,
rather than at the tail.
Export the apps list before libs list for both the projects and global
structures of the .sln file.
[1] http://stackoverflow.com/questions/1238553/
vs2008-where-is-the-startup-project-setting-stored-for-a-solution
"In the solution file, there are a list of pseudo-XML "Project"
entries. It turns out that whatever is the first one ends up as
the Startup Project, unless it’s overridden in the suo file. Argh.
I just rearranged the order in the file and it’s good."
"just moving the pseudo-xml isn't enough. You also have to move the
group of entries in the "GlobalSection(ProjectConfigurationPlatforms)
= postSolution" group that has the GUID of the project you moved to
the top. So there are two places to move lines."
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We ran out GUIDs. Again. But there is no need to: we can generate them
semi-randomly from the target file name of the project.
Note: the Vcproj generator is probably only interesting for historical
reasons; nevertheless, the upcoming Vcxproj generator (to support modern
Visual Studio versions) is based on the Vcproj generator and it is
better to fix this here first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
Code clean-up.
* rs/copy-array:
use COPY_ARRAY for copying arrays
coccinelle: use COPY_ARRAY for copying arrays
|
|
An incorrect list of options was cached after command line
completion failed (e.g. trying to complete a command that requires
a repository outside one), which has been corrected.
* nd/completion-no-cache-failure:
completion: do not cache if --git-completion-helper fails
|
|
Even though dwim is enabled by default, it will never be done when
--detached is specified. If you force "-d --guess" you will get an error
because --guess then implies -c which cannot be used with -d. So we can
disable dwim in "switch -d". It makes the completion list in this case a
bit shorter.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current semantic patch for COPY_ARRAY transforms memcpy(3) calls on
pointers, but Coccinelle distinguishes them from arrays. It already
contains three rules to handle the options for sizeof (i.e. source,
destination and type), and handling arrays as source and destination
would require four times as many rules if we enumerated all cases.
We also don't handle array subscripts, and supporting that would
increase the number of rules by another factor of four. (An isomorphism
telling Coccinelle that "sizeof x[...]" is equivalent to "sizeof *x"
would be nice..)
Support arrays and array subscripts, but keep the number of rules down
by adding normalization steps: First turn array subscripts into
derefences, then determine the types of expressions used with sizeof and
replace them with these types, and then convert the different possible
combinations of arrays and pointers with memcpy(3) to COPY_ARRAY.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git <cmd> --git-completion-helper" could fail if the command checks for
a repo before parse_options(). If the result is cached, later on when
the user moves to a worktree with repo, tab completion will still fail.
Avoid this by detecting errors and not cache the completion output. We
can try again and hopefully succeed next time (e.g. when a repo is
found).
Of course if --git-completion-helper fails permanently because of other
reasons (*), this will slow down completion. But I don't see any better
option to handle that case.
(*) one of those cases is if __gitcomp_builtin is called on a command
that does not support --git-completion-helper. And we do have a
generic call
__git_complete_common "$command"
but this case is protected with __git_support_parseopt_helper so we're
good.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If someone wants to use as a filter a sparse file that is in the
repository, something like "--filter=sparse:oid=<ref>:<path>"
already works.
So 'sparse:path' is only interesting if the sparse file is not in
the repository. In this case though the current implementation has
a big security issue, as it makes it possible to ask the server to
read any file, like for example /etc/password, and to explore the
filesystem, as well as individual lines of files.
If someone is interested in using a sparse file that is not in the
repository as a filter, then at the minimum a config option, such
as "uploadpack.sparsePathFilter", should be implemented first to
restrict the directory from which the files specified by
'sparse:path' can be read.
For now though, let's just disable 'sparse:path' filters.
Helped-by: Matthew DeVore <matvore@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix for a diff-highlight tool (in contrib/).
* cw/diff-highlight:
diff-highlight: use correct /dev/null for UNIX and Windows
|
|
Use File::Spec->devnull() for output redirection to avoid messages
when Windows version of Perl is first in path. The message 'The
system cannot find the path specified.' is displayed each time git is
run to get colors.
Signed-off-by: Chris. Webster <chris@webstech.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
|
|
Completion for restore is straightforward. We could still do better
though by giving the list of just tracked files instead of all present
ones. But let's leave it for later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule" learns "set-branch" subcommand that allows the
submodule.*.branch settings to be modified.
* dl/submodule-set-branch:
submodule: teach set-branch subcommand
submodule--helper: teach config subcommand --unset
git-submodule.txt: "--branch <branch>" option defaults to 'master'
|
|
"git mergetool" learned to offer Sublime Merge (smerge) as one of
its backends.
* da/smerge:
contrib/completion: add smerge to the mergetool completion candidates
mergetools: add support for smerge (Sublime Merge)
|
|
Code clean-up.
* dl/flex-str-cocci:
cocci: FLEX_ALLOC_MEM to FLEX_ALLOC_STR
midx.c: convert FLEX_ALLOC_MEM to FLEX_ALLOC_STR
|
|
The completion helper code now pays attention to repository-local
configuration (when available), which allows --list-cmds to honour
a repository specific setting of completion.commands, for example.
* tz/completion:
completion: use __git when calling --list-cmds
completion: fix multiple command removals
t9902: test multiple removals via completion.commands
git: read local config in --list-cmds
|
|
Remove the implicit dependency on the_repository in this function.
It will be used in sha1-name.c functions when they are updated to take
any 'struct repository'. get_commit_tree() remains as a compat wrapper,
to be slowly replaced later.
Any access to "maybe_tree" field directly will result in _broken_ code
after running through commit.cocci because we can't know what is the
right repository to use.
the_repository would be correct most of the time. But we're relying less
and less on the_repository and that assumption may no longer be
true. The transformation now is more of a poor man replacement for a C++
compiler catching access to private fields.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"maybe" pointer in 'struct commit' is tricky because it can be lazily
initialized to take advantage of commit-graph if available. This makes
it not safe to access directly.
This leads to a rule in commit.cocci to rewrite 'x->maybe_tree' to
'get_commit_tree(x)'. But that rule alone could lead to incorrectly
rewrite assignments, e.g. from
x->maybe_tree = yes
to
get_commit_tree(x) = yes
Because of this we have a second rule to revert this effect. Szeder
found out that we could do better by performing the assignment rewrite
rule first, then the remaining is read-only access and handled by the
current first rule.
For this to work, we need to transform "x->maybe_tree = y" to something
that does NOT contain "x->maybe_tree" to avoid the original first
rule. This is where set_commit_tree() comes in.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches git-submodule the set-branch subcommand which allows the
branch of a submodule to be set through a porcelain command without
having to manually manipulate the .gitmodules file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ensure that a FLEX_MALLOC_MEM that uses 'strlen' for its 'len' uses
FLEX_ALLOC_STR instead, since these are equivalent forms.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion support for --guess could be made better. If no --detach is
given, we should only provide a list of refs/heads/* and dwim ones,
not the entire ref space. But I still can't penetrate that
__git_refs() function yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we made --list-cmds read the local configuration file in an
earlier step, the completion.commands variable respects repo-level
configuration. Use __git which ensures that the proper repo config
is consulted if the command line contains 'git -C /some/other/repo'.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While looking at the inline help for git-subtree.sh, I noticed that
git subtree split --prefix=<prefix> <commit...>
was given as an option. However, it only really makes sense to provide
one revision because of the way the commits are forwarded to rev-parse
so change "<commit...>" to "<commit>" to reflect this. In addition,
check the arguments to ensure that only one rev is provided for all
subcommands that accept a commit.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
Command-line completion (in contrib/) learned to tab-complete the
"git submodule absorbgitdirs" subcommand.
* dl/complete-submodule-absorbgitdirs:
completion: complete git submodule absorbgitdirs
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cocci rule update.
* sg/strbuf-addbuf-cocci:
strbuf.cocci: suggest strbuf_addbuf() to add one strbuf to an other
|
|
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
|
|
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
|
Johannes Schindelin
Philip Oakley
Junio C Hamano
Nguyễn Thái Ngọc Duy
René Scharfe
Christian Couder
Chris. Webster
Denton Liu
David Aguilar
Todd Zullinger