| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After testing a previous patch at larger scale, a performance issue was
detected when using git show to locate parent revisions, with a single
run of the git show command taking 2 seconds or longer in a complex repo.
When the command is required tens or hundreds of times in a run of the
script, the additional wait time is unaccepatable. Replacing the command
with git rev-parse resulted in significantly increased performance, with
the command in question returning instantly.
Signed-off-by: Roger Strain <rstrain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When multiple identical parents are detected for a commit being considered
for copying, explicitly check whether one is the common merge base between
the commits. If so, the other commit can be used as the identical parent;
if not, a merge must be performed to maintain history.
In some situations two parents of a merge commit may appear to both have
identical subtree content with each other and the current commit. However,
those parents can potentially come from different commit graphs.
Previous behavior would simply select one of the identical parents to
serve as the replacement for this commit, based on the order in which they
were processed.
New behavior compares the merge base between the commits to determine if
a new merge commit is necessary to maintain history despite the identical
content.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds recursive evaluation of parent commits which were not part of the
initial commit list when performing a split.
Split expects all relevant commits to be reachable from the target commit
but not reachable from any previous rejoins. However, a branch could be
based on a commit prior to a rejoin, then later merged back into the
current code. In this case, a parent to the commit will not be present in
the initial list of commits, trigging an "incorrect order" warning.
Previous behavior was to consider that commit to have no parent, creating
an original commit containing all subtree content. This commit is not
present in an existing subtree commit graph, changing commit hashes and
making pushing to a subtree repo impossible.
New behavior will recursively check these unexpected parent commits to
track them back to either an earlier rejoin, or a true original commit.
The generated synthetic commits will properly match previously-generated
commits, allowing successful pushing to a prior subtree repo.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Changes the behavior of --ignore-joins to always consider a subtree add
commit, and ignore only splits and squashes.
The --ignore-joins option is documented to ignore prior --rejoin commits.
However, it additionally ignored subtree add commits generated when a
subtree was initially added to a repo.
Due to the logic which determines whether a commit is a mainline commit
or a subtree commit (namely, the presence or absence of content in the
subtree prefix) this causes commits before the initial add to appear to
be part of the subtree. An --ignore-joins split would therefore consider
those commits part of the subtree history and include them at the
beginning of the synthetic history, causing the resulting hashes to be
incorrect for all later commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a particularly complex repo, subtree split was not creating
compatible splits for pushing back to a separate repo. Addressing
one of the issues requires recursive handling of parent commits
that were not initially considered by the algorithm. This commit
makes no functional changes, but relocates the code to be called
recursively into a new method to simply comparisons of later
commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This mixture of quoting, pipes, and here-docs to produce expected
results in shell variables is difficult to follow. Simplify by using
simpler constructs that write output to files instead.
Noticed because without this patch, t/chainlint is not able to
understand the script in order to validate that its subshells use an
unbroken &&-chain, causing "make -C contrib/subtree test" to fail with
error: bug in the test script: broken &&-chain or run-away HERE-DOC:
in t7900.21.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Detected using t/chainlint.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" script (in contrib/) scripted around "git log", whose
output got affected by end-user configuration like log.showsignature
* sg/subtree-signed-commits:
subtree: fix add and pull for GPG-signed commits
|
|
If log.showsignature is true (or --show-signature is passed) while
performing a `subtree add` or `subtree pull`, the command fails.
toptree_for_commit() calls `log` and passes the output to `commit-tree`.
If this output shows the GPG signature data, `commit-tree` throws a
fatal error.
This commit fixes the issue by adding --no-show-signature to `log` calls
in a few places, as well as using the more appropriate `rev-parse`
instead where possible.
Signed-off-by: Stephen R Guglielmo <srg@guglielmo.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a small number of misspellings, ".gitmodule", scattered
throughout the code base, correct them ... no apparent functional
changes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Defining USE_ASCIIDOCTOR=1 when building Git uses asciidoctor over
asciidoc when generating DocBook and man page documentation. However,
the contrib/subtree module does not presently honour that flag.
This causes a build failure when asciidoc is not present on the build
system. Instead, adapt the main Documentation/Makefile logic to use
asciidoctor when requested.
Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We prefer a space between the function name and the parentheses, and no
space inside the parentheses.
The opening "{" should also be on the same line.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer "test" over "[ ... ]", use double-quotes around variables, break
long lines, and properly indent "case" statements.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" in v2.9 prevents merging unrelated histories.
"git subtree split --rejoin" creates unrelated histories when
creating a split repo from a raw sub-directory that did not
originate from an invocation of "git subtree add".
Restore the original behavior by passing --allow-unrelated-histories
when merging subtrees. This ensures that the synthetic history
created by "git subtree split" can be merged.
Add a test to ensure that this feature works as advertised.
Reported-by: Brett Cundal <brett.cundal@iugome.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow whitespace in arguments to subtree_test_create_repo.
Add missing && chains.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "split" subcommand of "git subtree" (in contrib/) incorrectly
skipped merges when it shouldn't, which was corrected.
* dw/subtree-split-do-not-drop-merge:
contrib/subtree: fix "subtree split" skipped-merge bug
|
|
* dg/subtree-test:
contrib/subtree: Make testing easier
|
|
"git subtree" (in contrib/) records the tag object name in the
commit log message when a subtree is added using a tag, without
peeling it down to the underlying commit. The tag needs to be
peeled when "git subtree split" wants to work on the commit, but
the command forgot to do so.
* rm/subtree-unwrap-tags:
contrib/subtree: unwrap tag refs
|
|
'git subtree split' can incorrectly skip a merge even when both parents
act on the subtree, provided the merge results in a tree identical to
one of the parents. Fix by copying the merge if at least one parent is
non-identical, and the non-identical parent is not an ancestor of the
identical parent.
Also, add a test case which checks that a descendant remains a
descendent on the subtree in this case.
Signed-off-by: Dave Ware <davidw@realtimegenomics.com>
Reviewed-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add some Makefile dependencies to ensure an updated git-subtree
gets copied to the main area before testing begins.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanups for the subtree project.
* dg/subtree-test-cleanup:
contrib/subtree: Handle '--prefix' argument with a slash appended
contrib/subtree: Make each test self-contained
contrib/subtree: Add split tests
contrib/subtree: Add merge tests
contrib/subtree: Add tests for subtree add
contrib/subtree: Add test for missing subtree
contrib/subtree: Clean and refactor test code
|
|
If a subtree was added using a tag ref, the tag ref is stored in
the subtree commit message instead of the underlying commit's ref.
To split or push subsequent changes to the subtree, the subtree
command needs to unwrap the tag ref. This patch makes it do so.
The problem was described in a message to the mailing list from
Junio C Hamano dated 29 Apr 2014, with the subject "Re: git subtree
issue in more recent versions". The archived message can be found
at <http://comments.gmane.org/gmane.comp.version-control.git/247503>.
Signed-off-by: Rob Mayoff <mayoff@dqd.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
'git subtree merge' will fail if the argument of '--prefix' has a slash
appended.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Each test runs a full repository creation and any subtree actions
needed to perform the test. Each test starts with a clean slate,
making debugging and post-mortem analysis much easier.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add tests to check various options to split. Check combinations of
--prefix, --message, --annotate, --branch and --rejoin.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add some tests for various merge operations. Test combinations of merge
with --message, --prefix and --squash.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add some tests to check various options to subtree add. These test
various combinations of --message, --prefix and --squash.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Test that a merge from a non-existant subtree fails.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Mostly prepare for the later tests refactoring. This moves some
common code to helper functions and generally cleans things up to be
more presentable.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Because the "push" command is already available, remove it from the
"todo" file.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remote repository may have spaces in its path, so take it into account.
Also, as far as there are no tests for the `push` command, add them.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In common case there can be spaces in a subdirectory name. Change tests
accorgingly to this statement.
Also, as far as a call to the `rejoin_msg` function (in `cmd_split`)
does not take into account such a case this patch fixes commit message
when `--rejoin` option is set .
Besides, as `fixnl` and `multiline` functions did not take into account
the "new" tested "space in a subdirectory name" case they become unused
and redundant, so they are removed.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" (in contrib/) depended on "git log" output to be
stable, which was a no-no. Apply a workaround to force a
particular date format.
* da/subtree-date-confusion:
contrib/subtree: ignore log.date configuration
|
|
git-subtree's log format string uses "%ad" and "%cd", which
respect the user's configured log.date value.
This is problematic for git-subtree because it needs to use real
dates so that copied commits come through unchanged.
Add a test and tweak the format strings to use %aD and %cD
so that the default date format is used instead.
Reported-by: Bryan Jacobs <b@q3q.us>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests update in contrib/subtree.
* cb/subtree-tests-update:
contrib/subtree: small tidy-up to test
contrib/subtree: fix broken &&-chains and revealed test error
contrib/subtree: use tabs consitently for indentation in tests
|
|
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" script (in contrib/) used "echo -n" to produce
progress messages in a non-portable way.
* dl/subtree-avoid-tricky-echo:
contrib/subtree: portability fix for string printing
|
|
'echo -n' is not portable, but this script used it as a way to give
a string followed by a carriage return for progress messages.
Introduce a new helper shell function "progress" and use printf as a
more portable way to do this. As a side effect, this makes it
unnecessary to have a raw CR in our source, which can be munged in
some shells. For example, MsysGit trims CR before executing a shell
script file in order to make it work right on Windows even if it
uses CRLF as linefeeds.
While at it, replace "echo" using printf in debug() and say() to
eliminate the temptation of reintroducing the same bug.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation says that --squash is for 'add', 'merge',
'pull' and 'push', while --squash actually doesn't change
the behavior of 'push'. Correct the documentation.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
List items must be continued with '+' (see [asciidoc]).
[asciidoc] AsciiDoc user guide 17.7. List Item Continuation
<http://www.methods.co.nz/asciidoc/userguide.html#X15>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also adjust ignore rules accordingly.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You should be able to run "make" in contrib/subtree with no
arguments and get the "all" target. This was broken by 8e2a5cc
(contrib/subtree/Makefile: use GIT-VERSION-FILE, 2014-05-06), which
put the rule for GIT-VERSION-FILE higher in the file.
We can fix this by putting an empty "all::" target at the top of the
file, just like our main Makefile does, and document that fact.
That fixes this instance and future-proofs against it happening
again.
Reported-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ep/shell-assign-and-export-vars:
scripts: more "export VAR=VALUE" fixes
scripts: "export VAR=VALUE" construct is not portable
|
|
* jd/subtree:
contrib/subtree: allow adding an annotated tag
contrib/subtree/Makefile: clean up rule for "clean"
contrib/subtree/Makefile: clean up rules to generate documentation
contrib/subtree/Makefile: s/libexecdir/gitexecdir/
contrib/subtree/Makefile: use GIT-VERSION-FILE
contrib/subtree/Makefile: scrap unused $(gitdir)
|
Roger Strain
Strain, Roger L
Jonathan Nieder
Junio C Hamano
Stephen R Guglielmo
Robert P. J. Day
Martin Ågren
A. Wilcox
Ville Skyttä
David Aguilar
Dave Ware
David A. Greene
Jeff King
Rob Mayoff
Techlive Zheng
Fabio Porcedda
Alexey Shumkin
Charles Bailey
Danny Lin
Steffen Prohaska
Thomas Ackermann
Sebastian Schuberth