| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git subtree" (in contrib/) depended on "git log" output to be
stable, which was a no-no. Apply a workaround to force a
particular date format.
* da/subtree-date-confusion:
contrib/subtree: ignore log.date configuration
|
|
git-subtree's log format string uses "%ad" and "%cd", which
respect the user's configured log.date value.
This is problematic for git-subtree because it needs to use real
dates so that copied commits come through unchanged.
Add a test and tweak the format strings to use %aD and %cD
so that the default date format is used instead.
Reported-by: Bryan Jacobs <b@q3q.us>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests update in contrib/subtree.
* cb/subtree-tests-update:
contrib/subtree: small tidy-up to test
contrib/subtree: fix broken &&-chains and revealed test error
contrib/subtree: use tabs consitently for indentation in tests
|
|
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" script (in contrib/) used "echo -n" to produce
progress messages in a non-portable way.
* dl/subtree-avoid-tricky-echo:
contrib/subtree: portability fix for string printing
|
|
'echo -n' is not portable, but this script used it as a way to give
a string followed by a carriage return for progress messages.
Introduce a new helper shell function "progress" and use printf as a
more portable way to do this. As a side effect, this makes it
unnecessary to have a raw CR in our source, which can be munged in
some shells. For example, MsysGit trims CR before executing a shell
script file in order to make it work right on Windows even if it
uses CRLF as linefeeds.
While at it, replace "echo" using printf in debug() and say() to
eliminate the temptation of reintroducing the same bug.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation says that --squash is for 'add', 'merge',
'pull' and 'push', while --squash actually doesn't change
the behavior of 'push'. Correct the documentation.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
List items must be continued with '+' (see [asciidoc]).
[asciidoc] AsciiDoc user guide 17.7. List Item Continuation
<http://www.methods.co.nz/asciidoc/userguide.html#X15>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also adjust ignore rules accordingly.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You should be able to run "make" in contrib/subtree with no
arguments and get the "all" target. This was broken by 8e2a5cc
(contrib/subtree/Makefile: use GIT-VERSION-FILE, 2014-05-06), which
put the rule for GIT-VERSION-FILE higher in the file.
We can fix this by putting an empty "all::" target at the top of the
file, just like our main Makefile does, and document that fact.
That fixes this instance and future-proofs against it happening
again.
Reported-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ep/shell-assign-and-export-vars:
scripts: more "export VAR=VALUE" fixes
scripts: "export VAR=VALUE" construct is not portable
|
|
* jd/subtree:
contrib/subtree: allow adding an annotated tag
contrib/subtree/Makefile: clean up rule for "clean"
contrib/subtree/Makefile: clean up rules to generate documentation
contrib/subtree/Makefile: s/libexecdir/gitexecdir/
contrib/subtree/Makefile: use GIT-VERSION-FILE
contrib/subtree/Makefile: scrap unused $(gitdir)
|
|
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
|
|
Found by check-non-portable-shell.pl
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_add_commit() is passed FETCH_HEAD by cmd_add_repository, which
is then rev-parsed into an object name. However, if the user is
fetching a tag rather than a branch HEAD, such as by executing:
$ git subtree add -P oldGit https://github.com/git/git.git tags/v1.8.0
the object name refers to a tag and is never peeled, and the git
commit-tree call (line 561) slaps us in the face because it doesn't
peel tags to commits.
Because peeling a committish doesn't do anything if it's already a
commit, fix by peeling the object name before assigning it to $rev
using peel_committish() from git:git-sh-setup.sh, a pre-existing
dependency of git-subtree.
Reported-by: Kevin Cagle <kcagle@micron.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git:Documentation/Makefile and others establish "RM ?= rm -f" as a
convention for rm calls in clean rules, hence follow this convention
instead of simply forcing clean to use rm.
subproj and mainline no longer need to be removed in clean, as they are
no longer created in git:contrib/subtree by "make test". Hence, remove
the rm call for those folders.
Other makefiles don't remove "*~" files, remove the rm call to prevent
unexpected behaviour in the future. Similarly, clean doesn't remove the
installable file, so rectify this.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git:Documentation/Makefile establishes asciidoc/xmlto calls as being
handled through their appropriate variables, Hence, change to bring into
congruency with.
Similarly, MANPAGE_XSL exists in git:Documentation/Makefile, while
MANPAGE_NORMAL_XSL does not outside contrib/subtree. Hence, replace
MANPAGE_NORMAL_XSL with MANPAGE_XSL.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$(libexecdir) isn't used anywhere else in the project, while
$(gitexecdir) is the standard in the other appropriate makefiles. Hence,
replace the former with the latter.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GVF is already being used in most/all other makefiles in the project,
and has been for _quite_ a while. Hence, drop file-unique gitver and
replace with GIT_VERSION.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 7ff8463dba0d74fc07a766bed457ae7afcc902b5, the references to gitdir
were removed but the assignment itself wasn't. Hence, drop the gitdir
assignment.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We parse the "--prefix" command-line option into the
"$prefix" shell variable. However, if we do not see such an
option, the variable is left with whatever value it had in
the environment. We should initialize it to a known value,
like we do for other variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working with a remote repository add/pull/push do not accept a
<refspec> as parameter but just a <ref>. They should accept any
well-formatted ref name.
This patch:
- relaxes the check the <ref> argument in "git subtree add <repo>"
(previous code would not accept a ref name that does not exist
locally too, new code only ensures that the ref is well formatted)
- add the same check in "git subtree pull/push" + check the number of
parameters
- update the doc to use <ref> instead of <refspec>
Signed-off-by: Anthony Baire <Anthony.Baire@irisa.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/subtree-install-fix:
subtree: add makefile target for html docs
|
|
The Makefile currently builds the roff manpage, but not the
html form. As some people may prefer the latter, let's make
it an option to build that, too. We also wire it into "make
doc" so that it is built by default.
This patch does not build or install it as part of
"install-doc"; that would require extra infrastructure to
handle installing the html as we do in git's regular
Documentation/ tree. That can come later if somebody is
interested.
Tested-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ob/typofixes:
many small typofixes
|
|
* ms/subtree-install-fix:
contrib/subtree: Fix make install target
|
|
* lf/echo-n-is-not-portable:
Avoid using `echo -n` anywhere
|
|
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Reviewed-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that git-subtree script does not have to be run with
bash.
* dm/unbash-subtree:
contrib/git-subtree: Use /bin/sh interpreter instead of /bin/bash
|
|
Use /bin/sh interpreter instead of /bin/bash for contrib/git-subtree:
it's required for systems which don't use bash by default (for example,
FreeBSD), while there seem to be no bashisms in the script (confirmed
by looking through the source and tesing subtree functionality with
FreeBSD's /bin/sh) to require specifically bash and not the generic
posix shell.
Signed-off-by: Dmitry Marakasov <amdmi3@amdmi3.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using "git subtree push" to split out a subtree and push it to a
remote repository, we do not detect if the split command fails which
causes the LHS of the refspec to be empty, deleting the remote branch.
Fix this by pulling the result of the split command into a variable so
that we can die if the command fails.
Reported-by: Steffen Jaeckel <steffen.jaeckel@stzedn.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Noticed with Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
contrib/subtree updates, but here are only the ones that looked
ready. The remainder of the patches will have another day.
* dg/subtree-fixes:
contrib/subtree: make the manual directory if needed
contrib/subtree: honor DESTDIR
contrib/subtree: fix synopsis
contrib/subtree: better error handling for 'subtree add'
contrib/subtree: use %B for split subject/body
contrib/subtree: remove test number comments
|
|
Before install git-subtree documentation, make sure the manpage
directory exists.
Signed-off-by: Jesper L. Nielsen <lyager@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-subtree's Makefile to honor DESTDIR.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the documentation of add to show that a repository can be
specified along with a commit.
Suggested by Yann Dirson <dirson@bertin.fr>.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check refspecs for validity before passing them on to other commands.
This lets us generate more helpful error messages.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use %B to format the commit message and body to avoid an extra newline
if a commit only has a subject line.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Delete the comments indicating test numbers as it causes maintenance
headaches. t*.sh -i will help us find any broken tests and these
numbers are not helping us anyway.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the install instructions to reflect the changes for an
integrated git-subtree.
Signed-off-by: David A. Greene <greened@obbligato.org>
|
|
Use the Makefile in contrib/subtree/t to run git-subtree tests.
Signed-off-by: David A. Greene <greened@obbligato.org>
|
Junio C Hamano
David Aguilar
Charles Bailey
Danny Lin
Steffen Prohaska
Thomas Ackermann
Sebastian Schuberth
Jeff King
Elia Pinto
James Denholm
Anthony Baire
Michal Sojka
Ondřej Bílka
Lukas Fleischer
Dmitry Marakasov
John Keeping
Stefano Lattarini
Jesper L. Nielsen
Adam Tkac
David A. Greene
Techlive Zheng
Michael Schubert