Age | Commit message (Collapse) | Author | Files | Lines |
|
'git subtree split' can incorrectly skip a merge even when both parents
act on the subtree, provided the merge results in a tree identical to
one of the parents. Fix by copying the merge if at least one parent is
non-identical, and the non-identical parent is not an ancestor of the
identical parent.
Also, add a test case which checks that a descendant remains a
descendent on the subtree in this case.
Signed-off-by: Dave Ware <davidw@realtimegenomics.com>
Reviewed-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git subtree merge' will fail if the argument of '--prefix' has a slash
appended.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Each test runs a full repository creation and any subtree actions
needed to perform the test. Each test starts with a clean slate,
making debugging and post-mortem analysis much easier.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add tests to check various options to split. Check combinations of
--prefix, --message, --annotate, --branch and --rejoin.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add some tests for various merge operations. Test combinations of merge
with --message, --prefix and --squash.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add some tests to check various options to subtree add. These test
various combinations of --message, --prefix and --squash.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Test that a merge from a non-existant subtree fails.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Mostly prepare for the later tests refactoring. This moves some
common code to helper functions and generally cleans things up to be
more presentable.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Remote repository may have spaces in its path, so take it into account.
Also, as far as there are no tests for the `push` command, add them.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In common case there can be spaces in a subdirectory name. Change tests
accorgingly to this statement.
Also, as far as a call to the `rejoin_msg` function (in `cmd_split`)
does not take into account such a case this patch fixes commit message
when `--rejoin` option is set .
Besides, as `fixnl` and `multiline` functions did not take into account
the "new" tested "space in a subdirectory name" case they become unused
and redundant, so they are removed.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" (in contrib/) depended on "git log" output to be
stable, which was a no-no. Apply a workaround to force a
particular date format.
* da/subtree-date-confusion:
contrib/subtree: ignore log.date configuration
|
|
git-subtree's log format string uses "%ad" and "%cd", which
respect the user's configured log.date value.
This is problematic for git-subtree because it needs to use real
dates so that copied commits come through unchanged.
Add a test and tweak the format strings to use %aD and %cD
so that the default date format is used instead.
Reported-by: Bryan Jacobs <b@q3q.us>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ep/shell-assign-and-export-vars:
scripts: more "export VAR=VALUE" fixes
scripts: "export VAR=VALUE" construct is not portable
|
|
Found by check-non-portable-shell.pl
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Noticed with Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use %B to format the commit message and body to avoid an extra newline
if a commit only has a subject line.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Delete the comments indicating test numbers as it causes maintenance
headaches. t*.sh -i will help us find any broken tests and these
numbers are not helping us anyway.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Set TEST_DIRECTORY to the main git test area. This allows the
git-subtree out-of-tree tests to run correctly.
Signed-off-by: David A. Greene <greened@obbligato.org>
|
|
git-subtree-dir: contrib/subtree
git-subtree-mainline: e8dde3e5f9ddb7cf95a6ff3cea6cf07c3a2db80d
git-subtree-split: d3a04e06c77d57978bb5230361c64946232cc346
|