| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Desktops and servers tend to have no power sensor, thus on_ac_power returns
255 ("unknown"). Thus, let's take any answer other than 1 ("battery") as
no contraindication to run gc.
If that tool returns "unknown", there's no point in querying other sources
as it already queried them, and is smarter than us (can handle multiple
adapters).
Reported by: Xin Li <delphij@google.com>
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Irfan Adilovic <irfanadilovic@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changes are described in CHANGES.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Stefan Tatschner <rumpelsepp@sevenbyte.org>
Contributions-by: Simon P <simon.git@le-huit.fr>
Contributions-by: Leander Hasty <leander@1stplayable.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Elijah Newren <newren@palantir.com>
Contributions-by: Edward d'Auvergne <edward@nmr-relax.com>
Contributions-by: Vadim Zeitlin <vadim@zeitlins.org>
Contributions-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Contributions-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Elijah Newren <newren@gmail.com>
Contributions-by: Richard Hansen <rhansen@rhansen.org>
Contributions-by: Job Snijders <job@instituut.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only change is a bugfix: the SMTP mailer was not working with
Python 2.4.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent Mac OS X updates breaks the logic to detect that the machine
is on the AC power in the sample pre-auto-gc script.
* pa/auto-gc-mac-osx:
hooks/pre-auto-gc: adjust power checking for newer OS X
|
|
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Richard Hansen <rhansen@rhansen.org>
Contributions-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Elijah Newren <newren@gmail.com>
Contributions-by: Luke Mewburn <luke@mewburn.net>
Contributions-by: Dave Boutcher <daveboutcher@gmail.com>
Contributions-by: Azat Khuzhin <a3at.mail@gmail.com>
Contributions-by: Sebastian Schuberth <sschuberth@gmail.com>
Contributions-by: Mikko Johannes Koivunalho <mikko.koivunalho@iki.fi>
Contributions-by: Elijah Newren <newren@palantir.com>
Contributions-by: Benoît Ryder <benoit@ryder.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only changes are to the README files, most notably the list of
maintainers and the project URL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit contains the squashed changes from the upstream
git-multimail repository since the last code drop. Highlights:
* Fix encoding of non-ASCII email addresses in email headers.
* Fix backwards-compatibility bugs for older Python 2.x versions.
* Fix a backwards-compatibility bug for Git 1.7.1.
* Add an option commitDiffOpts to customize logs for revisions.
* Pass "-oi" to sendmail by default to prevent premature
termination
on a line containing only ".".
* Stagger email "Date:" values in an attempt to help mail clients
thread the emails in the right order.
* If a mailing list setting is missing, just skip sending the
corresponding email (with a warning) instead of failing.
* Add a X-Git-Host header that can be used for email filtering.
* Allow the sender's fully-qualified domain name to be configured.
* Minor documentation improvements.
* Add a CHANGES file.
Contributions-by: Raphaël Hertzog <hertzog@debian.org>
Contributions-by: Eric Berberich <eric.berberich@gmail.com>
Contributions-by: Michiel Holtkamp <git@elfstone.nl>
Contributions-by: Malte Swart <mswart@devtation.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The docs in contrib/hooks/pre-auto-gc-battery suggest:
For example, if the hook is stored in
/usr/share/git-core/contrib/hooks/pre-auto-gc-battery:
chmod a+x pre-auto-gc-battery
cd /path/to/your/repository.git
ln -sf /usr/share/git-core/contrib/hooks/pre-auto-gc-battery \
hooks/pre-auto-gc
Unfortunately on multi-user systems most users do not have write
access to /usr. Better to mark the sample hooks executable in
the first place so users do not have to tweak their permissions to
use them by symlinking into .git/hooks/.
Reported-by: Olivier Berger <olivier.berger@it-sudparis.eu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some email clients (e.g., claws-mail) display the message body
incorrectly when the charset is not defined explicitly in a
Content-Type header. "git log" generates logs in UTF-8 encoding by
default, so add a Content-Type header declaring that encoding to
the emails the post-receive-email example hook sends.
[jn: also setting the Content-Transfer-Encoding so MTAs know what
kind of mangling might be needed when sending to a non 8-bit clean
SMTP host]
Requested-by: Alexander Gerasiov <gq@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git commands write commit messages in UTF-8 by default, but that
default can be overridden by the [i18n] commitEncoding and
logOutputEncoding settings. With such a setting, the emails written
by the post-receive-email hook use a mixture of encodings:
1. Log messages use the configured log output encoding, which is
meant to be whatever encoding works best with local terminals
(and does not have much to do with what encoding should be used
for email)
2. Filenames are left as is: on Linux, usually UTF-8, and in the Mingw
port (which uses Unicode filesystem APIs), always UTF-8
3. The "This is an automated email" preface uses a project description
from .git/description, which is typically in UTF-8 to support
gitweb.
So (1) is configurable, and (2) and (3) are unconfigurable and
typically UTF-8. Override the log output encoding to always use UTF-8
when writing the email to get the best chance of a comprehensible
single-encoding email.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This way the hook doesn't have to keep being tweaked as porcelain
learns new features like color and pagination.
While at it, replace the "git rev-list | git shortlog" idiom with
plain "git shortlog" for simplicity.
Except for depending less on the value of settings like '[log]
abbrevCommit', no change in output intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a notice to the top of post-receive-email explaining that the
script is no longer under active development and pointing the user to
git-multimail.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add git-multimail, a tool for generating notification emails for
pushes to a Git repository. It is largely plug-in compatible with
post-receive-email, and is proposed to eventually replace that script.
The advantages of git-multimail relative to post-receive-email are
described in README.migrate-from-post-receive-email.
git-multimail is organized in a directory contrib/hooks/multimail.
The directory contains:
* git_multimail.py -- a Python module that can generate notification
emails for pushes to a Git repository. The file can be used
directly as a post-receive script (configured via git config
settings), or it can be imported as a Python module and configured
via arbitrary Python code.
* README -- user-level documentation for configuring and using
git-multimail.
* post-receive -- an example of building a post-receive script that
imports git_multimail.py as a Python module, with an example of how
to change the email templates.
* README.migrate-from-post-receive-email -- documentation targeted at
current users of post-receive-email, explaining the differences and
how to migrate a post-receive-email configuration to git-multimail.
* migrate-mailhook-config -- a script that can migrate a user's
post-receive-email configuration options to the equivalent
git-multimail options.
* README.Git -- a short explanation of the relationship between
git-multimail and the rest of the Git project, plus the exact date
and revision when this version was taken from the upstream project.
All but the last file are taken verbatim from the upstream
git-multimail project.
git-multimail is originally derived from post-receive-email and also
incorporates suggestions from the mailing list as well as patches by
the people listed below.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Ramkumar Ramachandra <artagnon@gmail.com>
Contributions-by: Chris Hiestand <chrishiestand@gmail.com>
Contributions-by: Michiel Holtkamp <git@elfstone.nl>
Contributions-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This conforms to RFC3834 and is useful in preventing eg
vacation auto-responders from replying by default
Signed-off-by: Chris Hiestand <chiestand@salk.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Richard Fearn <richardfearn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prep_for_email neither is passed a fourth argument nor uses it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it easy to customize the git diff-tree options, for example
to include -p to include inline diffs.
It defaults to the current options "--stat --summary --find-copies-harder"
and thus is backward-compatible.
Signed-off-by: Jon Jensen <jon@endpoint.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function was returning 0 for failure and 1 for success which was
breaking the logic in the main loop. It now also returns in all
cases, rather than exiting.
Signed-off-by: Alan Raison <alan@theraisons.me.uk>
Acked-by: Kevin P. Fleming <kpfleming@digium.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kf/post-receive-sample-hook:
post-receive-email: ensure sent messages are not empty
|
|
Changes the logic in the script to determine whether an email message
will be sent before invoking the send_mail() function; otherwise, if
the logic determines that a message will not be sent, send_mail() will
cause an empty email to be sent. In addition, ensures that if multiple
refs are updated and a message cannot be sent for one of them,
the others are still processed normally.
Signed-off-by: Kevin P. Fleming <kpfleming@digium.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kf/post-receive-sample-hook:
post-receive-email: optional message line count limit
|
|
The previous form produced subjects like
[SCM] project.git branch, foo, updated. ...
The new one will produce the lighter
[SCM] project.git branch foo updated. ...
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have become used to the features of svnmailer when used with Subversion,
and one of those useful features is that it can limit the maximum length
(in lines) of a commit email message. This is terribly useful since once the
goes beyond a reasonable number of lines, nobody is going to read the remainder,
and if they really want the entire contents of the commits, they can use
git itself to get them using the revision IDs present in the message already.
Change the post-receive-email script to respond to an 'emailmaxlines' config key
which, if specified, will limit the number of lines generated (including
headers); any lines beyond the limit are suppressed, and a final line is added
indicating the number that were suppressed.
Signed-off-by: Kevin P. Fleming <kpfleming@digium.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the default hooks/post-receive file, the hook is called
with three arguments on stdin:
<oldrev> <newrev> <refname>
In command-line mode, the arguments come in a different order, because
the email hook instead calls:
generate_email $2 $3 $1
Add a comment to explain why, based on comments from the mailing list
and the commit message to v1.5.1~9. Thanks to Andy for the
explanation.
Requested-by: martin f. krafft <madduck@debian.org>
Cc: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a compound word.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a comment showing how to include a web link (i.e. gitweb/cgit)
and a patch in the email that is sent for each pushed commit.
The quoting was tricky enough that it's worth documenting. To add
two blank lines (i.e. put \n\n in the printf), you would need to
say \\\\n\\\\n, and in the end, the pair of "echo" statements seemed
better. This is used in glibc.git repository:
http://sources.redhat.com/git/gitweb.cgi?p=glibc.git;a=summary
push-triggered messages have been sent to this list since May 21:
http://sourceware.org/ml/glibc-cvs/2009-q2/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the show_new_revisions function, the original code:
git rev-parse --not --branches | grep -v $(git rev-parse $refname) |
isn't quite right since one can create a new branch and push it
without any new commits. In that case, two refs will have the same
sha1 but both would get filtered by the 'grep'. In the end, we'll
show ALL the history which is not what we want. Instead, we should
list the branches by name and remove the branch being updated and THEN
pass that list through rev-parse.
Revised as suggested by Jakub Narebski and Junio C Hamano to use
git-for-each-ref instead of git-branch. (Thanks!)
Signed-off-by: Pat Notz <pknotz@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add configuration option hooks.showrev, letting the user override how
revisions will be shown in the commit email.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The display of a revision in an email-appropriate format is done in
two places with similar code. In preparation for making that display
more complex, move it into a separate function that handles both cases.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the hook gets invoked with identical old and new ids there
is no change taking place. We probably should not have been
called, but instead of failing silently allow the no-op.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user or group ACL file does not exist in the current tip
revision of the acl repository we will get an error from cat-file
when we ask for that blob as it cannot be resolved. A quick look
at the history by rev-list can tell us if there is a path there
or not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Listing all files in a branch during branch creation is silly;
the user's file-level ACLs probably don't mean anything at this
point. We now treat the base case of 0{40} as an empty diff,
as this happens only when the user is creating the branch and
there are file level ACLs that diff against the old value of
the branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
post-receive-email: fix accidental removal of a trailing space in signature line
Escape project names before creating pathinfo URLs
Escape project name in regexp
bash: Add completion for git diff --base --ours --theirs
diff-options.txt: document the new "--dirstat" option
|
|
post-receive-email adds a signature to the end of emails in
generate_email_footer(). The signature was separated from the main email
body using the standard string "-- ". (see RFC 3676)
a6080a0 (War on whitespace, 2007-06-07) removed the trailing whitespace
from "-- ", leaving it as "--", which is not a correct signature
separator.
This patch restores the missing space, but does it in a way that will
not set off the trailing whitespace alarms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It disables git-gc --auto when you are running Linux and you are
not on AC.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following patch will introduce a new configuration variable,
"format.pretty", from then on the pretty format without specifying
"--pretty" might not be the default "--pretty=medium", it depends on
the user's config. So all kinds of Shell/Perl/Emacs scripts that needs
the default medium pretty format must specify it explicitly.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all git command calls to use the git (space) command format, and
remove the use of git-repo-config in place of git config.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Adam Borowski
Ville Skyttä
Matthieu Moy
Junio C Hamano
Panagiotis Astithas
Michael Haggerty
Jonathan Nieder
Gerrit Pape
David Aguilar
Chris Hiestand
Richard Fearn
Jon Jensen
Sitaram Chamarty
Alan Raison
Kevin P. Fleming
Felipe Contreras
Jim Meyering
Pat Notz
Pete Harlan
Miklos Vajna
Jonathan del Strother
Todd Zullinger
Shawn O. Pearce
Andy Parkins
Denis Cheng
Dan McGee