summaryrefslogtreecommitdiff
path: root/contrib/fast-import/git-p4
AgeCommit message (Collapse)AuthorFilesLines
2011-08-22git-p4: Allow branch definition with git configLibravatar Vitor Antunes1-0/+24
Perforce does not strictly require the usage of branch specifications to create branches. In these cases the branch detection code of git-p4 will not be able to import them. This patch adds support for git-p4.branchList configuration option, allowing branches to be defined in git config. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22git-p4: Allow filtering Perforce branches by userLibravatar Vitor Antunes1-1/+7
All branches in the Perforce server are downloaded to allow branch detection. If you have a centralized server on a remote location and there is a big number of branches this operation can take some time. This patch adds the configuration option git-p4.branchUser to allow filtering the branch list by user. Although this limits the branch maintenance in Perforce to be done by a single user, it might be an advantage when the number of branches being used in a specific depot is very small when compared with the branches available in the server. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22git-p4: Correct branch base depot path detectionLibravatar Vitor Antunes1-3/+5
When branch detection is enabled each branch is named in git after their relative depot path in Perforce. To do this the depot paths are compared against each other to find their common base path. The current algorithm makes this comparison on a character by character basis. Assuming we have the following branches: //depot/branches/featureA //depot/branches/featureB Then the base depot path would be //depot/branches/feature, which is an invalid depot path. The current patch fixes this by splitting the path into a list and comparing the list entries, making it choose correctly //depot/branches as the base path. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22git-p4: Process detectCopiesHarder with --boolLibravatar Vitor Antunes1-1/+1
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-22git-p4: Allow setting rename/copy detection thresholdLibravatar Vitor Antunes1-4/+9
Copy and rename detection arguments (-C and -M) allow setting a threshold value for the similarity ratio. If the similarity is below this threshold the rename or copy is ignored and the file is added as new. This patch allows setting git-p4.detectRenames and git-p4.detectCopies options to an integer value to set the respective threshold. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-01git-p4: commit time should be most recent p4 change timeLibravatar Pete Wyckoff1-1/+14
When importing a repo, the time on the initial commit had been just "now". But this causes problems when trying to share among git-p4 repos that were created identically, although at different times. Instead, use the time in the top-most p4 change as the time for the git import commit. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-13git-p4: warn if git authorship won't be retainedLibravatar Luke Diamand1-2/+31
If the git commits you are submitting contain changes made by other people, the authorship will not be retained. Change git-p4 to warn of this and to note that --preserve-user can be used to solve the problem (if you have suitable permissions). The warning can be disabled. Add a test case and update documentation. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-09git-p4: small improvements to user-preservationLibravatar Luke Diamand1-5/+14
. Slightly more paranoid checking of results from 'p4 change' . Remove superfluous "-G" . Don't modify the username if it is unchanged. . Add a comment in the change template to show what is going to be done. Signed-off-by: Luke Diamand <luke@diamand.org> Acked-By: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-26git-p4: add option to preserve user namesLibravatar Luke Diamand1-38/+141
Patches from git passed into p4 end up with the committer being identified as the person who ran git-p4. With "submit --preserve-user", git-p4 modifies the p4 changelist (after it has been submitted), setting the p4 author field. The submitter is required to have sufficient p4 permissions or git-p4 refuses to proceed. If the git author is not known to p4, the submit will be abandoned unless git-p4.allowMissingP4Users is true. Signed-off-by: Luke Diamand <luke@diamand.org> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-07git-p4: replace each tab with 8 spaces for consistencyLibravatar Andrew Garber1-32/+32
Note that the majority of git-p4 uses spaces, not tabs, for indentation. Consistent indentation is a good hygiene for Python scripts, and mixing tabs and spaces in Python can lead to hard-to-find bugs. Signed-off-by: Andrew Garber <andrew@andrewgarber.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-23Merge branch 'pw/p4'Libravatar Junio C Hamano1-1/+3
* pw/p4: git-p4: test sync new branch git-p4: fix sync new branch regression
2011-03-16git-p4: fix sync new branch regressionLibravatar Pete Wyckoff1-1/+3
e32e00d (git-p4: better message for "git-p4 sync" when not cloned, 2011-02-19) broke another use case, that of using "git-p4 sync" to import a new branch into an existing repository. Refine the fix again, on top of the fix in ac34efc. Reported-by: Michael Horowitz <michael.horowitz@ieee.org> Signed-off-by: Pete Wyckoff <pw@padd.com> Tested-by: Michael Horowitz <michael.horowitz@ieee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-15git-p4: Fix error message crash in P4Sync.commit.Libravatar Tor Arvid Lund1-1/+1
There is an error message that crashes the script because of an invalid ref to the non-existing "path" variable. It is almost never printed, which would explain why nobody encountered this problem before... But anyway, this oneliner fixes it. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-15Teach git-p4 to ignore case in perforce filenames if configured.Libravatar Tor Arvid Lund1-7/+20
When files are added to perforce, the path to that file has whichever case configuration that exists on the machine of the user who added the file. What does that mean? It means that when Alice adds a file //depot/DirA/FileA.txt ... and Bob adds: //depot/dirA/FileB.txt ... we may or may not get a problem. If a user sets the config variable git-p4.ignorecase to "true", we will consider //depot/DirA and //depot/dirA to be the same directory. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-15git-p4: Teach gitConfig method about arguments.Libravatar Tor Arvid Lund1-2/+6
With this patch, it is possible to call the gitConfig method with an optional argument string, which will be passed to the "git config" executable. For instance: gitConfig("core.ignorecase", "--bool") will ensure that you get the value "true", and won't have to check the returned value for [1, true, on, yes]. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-13Merge branch 'pw/p4'Libravatar Junio C Hamano1-1/+1
* pw/p4: git-p4: test clone @all git-p4: fix clone @all regression
2011-03-13git-p4: fix clone @all regressionLibravatar Pete Wyckoff1-1/+1
e32e00d (git-p4: better message for "git-p4 sync" when not cloned, 2011-02-19) broke the use of the "@all" revision specifier, e.g., git-p4 clone //depot/xxx@all Fix it as per Tor Arvid's quick patch. Signed-off-by: Pete Wyckoff <pw@padd.com> Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com> Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-04Merge branch 'mh/p4'Libravatar Junio C Hamano1-1/+1
* mh/p4: git-p4 submit: prevent 'Jobs' section from being removed from p4 change log
2011-02-27Merge branch 'va/p4'Libravatar Junio C Hamano1-4/+31
* va/p4: git-p4: Add copy detection support git-p4: Improve rename detection support
2011-02-27Merge branch 'pw/p4'Libravatar Junio C Hamano1-11/+49
* pw/p4: git-p4: support clone --bare git-p4: decode p4 wildcard characters git-p4: better message for "git-p4 sync" when not cloned git-p4: reinterpret confusing p4 message git-p4: accommodate new move/delete type in p4 git-p4: add missing newline in initial import message git-p4: fix key error for p4 problem git-p4: test script
2011-02-25git-p4 submit: prevent 'Jobs' section from being removed from p4 change logLibravatar Michael Horowitz1-1/+1
In an attempt to overwrite the 'Description:' section of the p4 change log to include the git commit messages, it also overwrote the 'Jobs:' section.  This fix restores the 'Job:' section. Signed-off-by: Michael Horowitz <michael.horowitz@ieee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: Add copy detection supportLibravatar Vitor Antunes1-0/+16
Add new config options: git-p4.detectCopies - Enable copy detection. git-p4.detectCopiesHarder - Find copies harder. The detectCopies option should be set to a true/false value. The detectCopiesHarder option should be set to true/false value. P4Submit can now process diff-tree C status and integrate files accordingly. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: Improve rename detection supportLibravatar Vitor Antunes1-4/+15
Only open files for edit after integrating if the SHA1 of source and destination differ from each other. Add git config option detectRenames to allow permanent rename detection. This options should be set to a true/false value. Rename "detectRename" variable to "detectRenames" to make it more coherent with the description in git man pages, which always use plural. Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: support clone --bareLibravatar Pete Wyckoff1-4/+13
Just like git clone --bare, build a .git directory but no checked out files. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: decode p4 wildcard charactersLibravatar Pete Wyckoff1-0/+18
There are four wildcard characters in p4. Files with these characters can be added to p4 repos using the "-f" option. They are stored in %xx notation, and when checked out, p4 converts them back to normal. This patch does the same thing when importing into git, converting the four special characters. Without this change, the files appear with literal %xx in their names. Be careful not to produce "*" in filenames on windows. That will fail. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: better message for "git-p4 sync" when not clonedLibravatar Pete Wyckoff1-0/+2
A common error is to do "git-p4 sync" in a repository that was not initialized by "git-p4 clone". There will be no p4 refs. The error message in this case is a traceback for an assertion, which is confusing. Change it instead to explain the likely problem. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: reinterpret confusing p4 messageLibravatar Pete Wyckoff1-0/+4
Error output will look like this: glom$ git p4 clone //deopt Importing from //deopt into . Reinitialized existing Git repository in /tmp/x/.git/ Doing initial import of //deopt from revision #head into refs/remotes/p4/master p4 returned an error: //deopt/... - must refer to client glom. This particular p4 error is misleading. Perhaps the depot path was misspelled. Depot path: //deopt Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: accommodate new move/delete type in p4Libravatar Pete Wyckoff1-5/+7
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21) taught git-p4 sync to recognize the new move/delete type, but this type can also show up in an initial clone and labels output. Instead of replicating the support in three places, hoist the definition somewhere global. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: add missing newline in initial import messageLibravatar Pete Wyckoff1-1/+1
Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21git-p4: fix key error for p4 problemLibravatar Pete Wyckoff1-1/+4
Some p4 failures result in an error, but the info['code'] is not set. These include a bad p4 executable, or a core dump from p4, and other odd internal errors where p4 fails to generate proper marshaled output. Make sure the info key exists before using it to avoid a python traceback. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-14Obey p4 views when using client specLibravatar Ian Wienand1-4/+46
When using the p4 client spec, this attempts to obey the client's output preferences. For example, a view like //depot/foo/branch/... //client/branch/foo/... //depot/bar/branch/... //client/branch/bar/... will result in a directory layout in the git tree of branch/ branch/foo branch/bar p4 can do various other reordering that this change doesn't support, but we should detect it and at least fail nicely. Signed-off-by: Ian Wienand <ianw@vmware.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-22Fix handling of git-p4 on deleted filesLibravatar Andrew Waters1-1/+3
Signed-off-by: Andrew Waters <apwaters@googlemail.com> Tested-by: Thomas Berg <merlin66b@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Fix a spelling mistake in a git-p4 console messageLibravatar Benjamin C Meyer1-1/+1
Signed-off-by: Benjamin C Meyer <bmeyer@rim.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20git-p4: fix bug in symlink handlingLibravatar Evan Powers1-3/+2
Fix inadvertent breakage from b932705 (git-p4: stream from perforce to speed up clones, 2009-07-30) in the code that strips the trailing '\n' from p4 print on a symlink. (In practice, contents is of the form ['target\n', ''].) Signed-off-by: Evan Powers <evan.powers@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-01git-p4: Fix sync errors due to new server versionLibravatar Pal-Kristian Engstad1-1/+1
Fix sync errors due to new Perforce servers. The P4D/NTX64/2009.2/228098 (2009/12/16) server reports 'move/delete' instead of 'delete'. This causes the Perforce depot and the git repo to get out of sync. Fixed by adding the new status string. Signed-off-by: Pal-Kristian Engstad <pal_engstad@naughtydog.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-21fix git-p4 editor invocationLibravatar Nicolas Pitre1-1/+1
The strip() is required to remove the trailing newline character, as already done elsewhere. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-13add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"Libravatar Jonathan Nieder1-4/+1
Use the new "git var GIT_EDITOR" feature to decide what editor to use, instead of duplicating its logic elsewhere. This should make the behavior of commands in edge cases (e.g., editor names with spaces) a little more consistent. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-10git-p4: Avoid modules deprecated in Python 2.6.Libravatar Reilly Grant1-7/+5
The popen2, sha and sets modules are deprecated in Python 2.6 (sha in Python 2.5). Both popen2 and sha are not actually used in git-p4. Replace usage of sets.Set with the builtin set object. The built-in set object was added in Python 2.4 and is already used in other parts of this script, so this dependency is nothing new. Signed-off-by: Reilly Grant <reillyeon@qotw.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-10git-p4: stream from perforce to speed up clonesLibravatar Luke Diamand1-67/+102
Change commit() to stream data from Perforce and into fast-import rather than reading into memory first, and then writing out. This hugely reduces the memory requirements when cloning non-incrementally. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-07git-p4: remove tabs from usermap fileLibravatar Pete Wyckoff1-1/+1
Some users have tabs in their names, oddly enough. This causes problems when loading the usercache from disk, as split separates the fields on the wrong tabs. When fast-import's parse_ident() tries to parse the committer field, it is unhappy about the unbalanced <..> angle brackets. It is easy enough to convert the tabs to single spaces. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-23git-p4: avoid syncing duplicate changesLibravatar Pete Wyckoff1-5/+6
When a particular changeset affects multiple depot paths, it will appear multiple times in the output of "p4 changes". Filter out the duplicates to avoid the extra empty commits that this otherwise would create. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-09git-p4: Fix regression in p4Where method.Libravatar Tor Arvid Lund1-3/+10
Unfortunately, I introduced a bug in commit 7f705dc36 (git-p4: Fix bug in p4Where method). This happens because sometimes the result from "p4 where <somepath>" doesn't contain a "depotFile" key, but instead a "data" key that needs further parsing. This commit should ensure that both of these cases are checked. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-04git-p4: Fix bug in p4Where method.Libravatar Tor Arvid Lund1-1/+9
When running: p4 where //depot/SomePath/... The result can in some situations look like: //depot/SomePath/... //client/SomePath/... /home/user/p4root/SomePath/... -//depot/SomePath/UndesiredSubdir/... //client/SomePath/UndesiredSubdir/... /home/user/p4root/SomePath/UndesiredSubdir/... This depends on the users Client view. The current p4Where method will now return /home/user/p4root/SomePath/UndesiredSubdir/... which is not what we want. This patch loops through the results from "p4 where", and picks the one where the depotFile exactly matches the given depotPath (//depot/SomePath/... in this example). Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-27Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: sha1_file.c: resolve confusion EACCES vs EPERM sha1_file: avoid bogus "file exists" error message git checkout: don't warn about unborn branch if -f is already passed bash: offer refs instead of filenames for 'git revert' bash: remove dashed command leftovers git-p4: fix keyword-expansion regex fast-export: use an unsorted string list for extra_refs Add new testcase to show fast-export does not always exports all tags
2008-11-27git-p4: fix keyword-expansion regexLibravatar Pete Wyckoff1-1/+1
This text: my $dir = $File::Find::dir; return if ($dir !~ m,$options->{dirpat}$,); was improperly converted to: my $dir = $File$dir !~ m,$options->{dirpat}$,); by the keyword identifier expansion code. Add a \n to make sure the regex doesn't go across end-of-line boundaries. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11git-p4: Cache git config for performanceLibravatar John Chapman1-1/+4
This makes git-p4 noticibly faster on Windows. Signed-off-by: John Chapman <thestar@fussycoder.id.au> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11git-p4: Support purged files and optimize memory usageLibravatar John Chapman1-7/+7
Purged files are handled as if they are merely deleted, which is not entirely optimal, but I don't know of any other way to handle them. File data is deleted from memory as early as they can, and they are more efficiently handled, at (significant) cost to CPU usage. Still need to handle p4 branches with spaces in their names. Still need to make git-p4 clone more reliable. - Perhaps with a --continue option. (Sometimes the p4 server kills the connection) Signed-off-by: John Chapman <thestar@fussycoder.id.au> Acked-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-29git-p4: Fix checkout bug when using --import-local.Libravatar Tor Arvid Lund1-2/+6
When this option is passed to git p4 clone, the checkout at the end would previously fail. This patch fixes it by optionally creating the master branch from refs/heads/p4/master, which is the correct one for this option. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Acked-By: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-27Make it possible to abort the submission of a change to PerforceLibravatar Simon Hausmann1-8/+23
Currently it is not possible to skip the submission of a change to Perforce when running git-p4 submit. This patch compares the modification time before and after the submit editor invokation and offers a prompt for skipping if the submit template file was not saved. Signed-off-by: Simon Hausmann <simon@lst.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-22git-p4: Fix one-liner in p4_write_pipe function.Libravatar Tor Arvid Lund1-1/+1
The function built a p4 command string via the p4_build_cmd function, but ignored the result. Signed-off-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 20:35:55 +0000