| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* cp/completion-clone-recurse-submodules:
completion: add option '--recurse-submodules' to 'git clone'
|
|
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-prompt scriptlet (in contrib/) was not friendly with those
who uses "set -u", which has been fixed.
* vs/prompt-avoid-unset-variable:
git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
|
|
When the shell is in "nounset" or "set -u" mode, referencing unset or
null variables results in an error. Protect $ZSH_VERSION and
$BASH_VERSION against that, and initialize $short_sha before use.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion scripts (in contrib/) did not include the
"--cherry-mark" option when completing "git log <HT>".
* mg/complete-cherry-mark-to-log:
completion: complete --cherry-mark for git log
|
|
Shell completion (in contrib/) updates.
* rt/completion-help:
completion: add 'revisions' and 'everyday' to 'git help'
completion: add option '--guides' to 'git help'
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pw/completion-stash:
completion: fix mis-indentation in _git_stash()
|
|
* pw/completion-stash:
completion: fix mis-indentation in _git_stash()
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the untracked cache subsystem and change its primary UI from
"git update-index" to "git config".
* cc/untracked:
t7063: add tests for core.untrackedCache
test-dump-untracked-cache: don't modify the untracked cache
config: add core.untrackedCache
dir: simplify untracked cache "ident" field
dir: add remove_untracked_cache()
dir: add {new,add}_untracked_cache()
update-index: move 'uc' var declaration
update-index: add untracked cache notifications
update-index: add --test-untracked-cache
update-index: use enum for untracked cache options
dir: free untracked cache when removing it
|
|
* tb/complete-word-diff-regex:
completion: complete "diff --word-diff-regex="
|
|
* pw/completion-stash:
completion: update completion arguments for stash
|
|
* pw/completion-show-branch:
completion: complete show-branch "--date-order"
|
|
* pw/completion-stash:
completion: update completion arguments for stash
|
|
* pw/completion-show-branch:
completion: complete show-branch "--date-order"
|
|
* jk/completion-rebase:
completion: add missing git-rebase options
|
|
* tb/complete-word-diff-regex:
completion: complete "diff --word-diff-regex="
|
|
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
|
|
Add --all and --include-untracked to the git stash save completions.
Add --quiet to the git stash drop completions.
Update git stash branch so that the first argument expands out to the
possible branch names, and the other arguments expand to the stash
names.
Signed-off-by: Paul Wagland <paul@kungfoocoder.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Paul Wagland <paul@kungfoocoder.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds the --no-* variants where those are documented in
git-rebase(1).
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
|
|
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
|
|
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
|
|
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A fix-up for recent topic.
* jk/send-email-complete-aliases:
completion: fix completing unstuck email alias arguments
|
|
Completing unstuck form of email aliases doesn't quite work:
$ git send-email --to <TAB>
alice bob cecil
$ git send-email --to a<TAB>
alice bob cecil
While listing email aliases works as expected, the second case should
just complete to 'alice', but it keeps offering all email aliases
instead.
The cause for this behavior is that in this case we mistakenly tell
__gitcomp() explicitly that the current word to be completed is empty,
while in reality it is not. As a result __gitcomp() doesn't filter
out non-matching aliases, so all aliases end up being offered over and
over again.
Fix this by not passing the current word to be completed to
__gitcomp() and letting it go the default route and grab it from the
'$cur' variable. Don't pass empty prefix either, because it's assumed
to be empty when unspecified, so it's not necessary.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git column' is an internal helper, so it should not be offered on
'git <TAB>' along with porcelain commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Produce correct "dirty" marker for shell prompts, even when we
are on an orphan or an unborn branch.
* sg/bash-prompt-dirty-orphan:
bash prompt: indicate dirty index even on orphan branches
bash prompt: remove a redundant 'git diff' option
bash prompt: test dirty index and worktree while on an orphan branch
|
|
__git_ps1() doesn't indicate dirty index while on an orphan branch.
To check the dirtiness of the index, __git_ps1() runs 'git diff-index
--cached ... HEAD', which doesn't work on an orphan branch,
because HEAD doesn't point to a valid commit.
Run 'git diff ... --cached' instead, as it does the right thing both
on valid and invalid HEAD, i.e. compares the index to the existing
HEAD in the former case and to the empty tree in the latter. This
fixes the two failing tests added in the first commit of this series.
The dirtiness of the worktree is already checked with 'git diff' and
is displayed correctly even on an orphan branch.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
To get the dirty state indicator __git_ps1() runs 'git diff' with
'--quiet --exit-code' options. '--quiet' already implies
'--exit-code', so the latter is unnecessary and can be removed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Using the new --dump-aliases option from git-send-email, add completion
for --to, --cc, --bcc, and --from with the available configured aliases.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
"git config --list" output was hard to parse when values consist of
multiple lines. "--name-only" option is added to help this.
* sg/config-name-only:
get_urlmatch: avoid useless strbuf write
format_config: simplify buffer handling
format_config: don't init strbuf
config: restructure format_config() for better control flow
completion: list variable names reliably with 'git config --name-only'
config: add '--name-only' option to list only variable names
|
|
A new configuration variable http.sslVersion can be used to specify
what specific version of SSL/TLS to use to make a connection.
* ep/http-configure-ssl-version:
http: add support for specifying the SSL version
|
|
The command-line completion script (in contrib/) has been updated.
* tb/complete-rebase-i-edit-todo:
completion: offer '--edit-todo' during interactive rebase
|
|
Teach git about a new option, "http.sslVersion", which permits one
to specify the SSL version to use when negotiating SSL connections.
The setting can be overridden by the GIT_SSL_VERSION environment
variable.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recenty I created a multi-line branch description with '.' and '='
characters on one of the lines, and noticed that fragments of that line
show up when completing set variable names for 'git config', e.g.:
$ git config --get branch.b.description
Branch description to fool the completion script with a
second line containing dot . and equals = characters.
$ git config --unset <TAB>
...
second line containing dot . and equals
...
The completion script runs 'git config --list' and processes its output
to strip the values and keep only the variable names. It does so by
looking for lines containing '.' and '=' and outputting everything
before the '=', which was fooled by my multi-line branch description.
A similar issue exists with aliases and pretty format aliases with
multi-line values, but in that case 'git config --get-regexp' is run and
lines in its output are simply stripped after the first space, so
subsequent lines don't even have to contain '.' and '=' to fool the
completion script.
Use the new '--name-only' option added in the previous commit to list
config variable names reliably in both cases, without error-prone post
processing.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: John Keeping <john@keeping.me.uk>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optimize computation of untracked status indicator by bash prompt
script (in contrib/).
* sg/bash-prompt-untracked-optim:
bash prompt: faster untracked status indicator with untracked directories
bash prompt: test untracked files status indicator with untracked dirs
|
|
* sg/completion-commit-cleanup:
completion: teach 'scissors' mode to 'git commit --cleanup='
|
|
If the untracked status indicator is enabled, __git_ps1() looks for
untracked files by running 'git ls-files'. This can be perceptibly slow
in case of an untracked directory containing lot of files, because it
lists all files found in the untracked directory only to be redirected
into /dev/null right away (this is the actual command run by __git_ps1()):
$ ls untracked-dir/ |wc -l
100000
$ time git ls-files --others --exclude-standard --error-unmatch \
-- ':/*' >/dev/null 2>/dev/null
real 0m0.955s
user 0m0.936s
sys 0m0.016s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the name of
non-empty untracked directories instead of all their content:
$ time git ls-files --others --exclude-standard --directory \
--no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null
real 0m0.010s
user 0m0.008s
sys 0m0.000s
This follows suit of ea95c7b8f5 (completion: improve untracked directory
filtering for filename completion, 2013-09-18).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* jc/prompt-document-ps1-state-separator:
git-prompt.sh: document GIT_PS1_STATESEPARATOR
|
|
The tcsh completion writes a bash scriptlet but that would have
failed for users with noclobber set.
* af/tcsh-completion-noclobber:
git-completion.tcsh: fix redirect with noclobber
|
Junio C Hamano
Chris Packham
Ville Skyttä
Michael J Gruber
Ralf Thielow
SZEDER Gábor
Christian Couder
Paul Wagland
John Keeping
Thomas Braun
Johannes Schindelin
Victor Leschuk
Jacob Keller
Elia Pinto