summaryrefslogtreecommitdiff
path: root/contrib/completion/git-prompt.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-06-27Merge branch 'vs/prompt-avoid-unset-variable'Libravatar Junio C Hamano1-3/+3
The git-prompt scriptlet (in contrib/) was not friendly with those who uses "set -u", which has been fixed. * vs/prompt-avoid-unset-variable: git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_sha
2016-06-06git-prompt.sh: Don't error on null ${ZSH,BASH}_VERSION, $short_shaLibravatar Ville Skyttä1-3/+3
When the shell is in "nounset" or "set -u" mode, referencing unset or null variables results in an error. Protect $ZSH_VERSION and $BASH_VERSION against that, and initialize $short_sha before use. Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-24bash prompt: indicate dirty index even on orphan branchesLibravatar SZEDER Gábor1-3/+2
__git_ps1() doesn't indicate dirty index while on an orphan branch. To check the dirtiness of the index, __git_ps1() runs 'git diff-index --cached ... HEAD', which doesn't work on an orphan branch, because HEAD doesn't point to a valid commit. Run 'git diff ... --cached' instead, as it does the right thing both on valid and invalid HEAD, i.e. compares the index to the existing HEAD in the former case and to the empty tree in the latter. This fixes the two failing tests added in the first commit of this series. The dirtiness of the worktree is already checked with 'git diff' and is displayed correctly even on an orphan branch. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net>
2015-11-24bash prompt: remove a redundant 'git diff' optionLibravatar SZEDER Gábor1-1/+1
To get the dirty state indicator __git_ps1() runs 'git diff' with '--quiet --exit-code' options. '--quiet' already implies '--exit-code', so the latter is unnecessary and can be removed. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net>
2015-07-20bash prompt: faster untracked status indicator with untracked directoriesLibravatar SZEDER Gábor1-1/+1
If the untracked status indicator is enabled, __git_ps1() looks for untracked files by running 'git ls-files'. This can be perceptibly slow in case of an untracked directory containing lot of files, because it lists all files found in the untracked directory only to be redirected into /dev/null right away (this is the actual command run by __git_ps1()): $ ls untracked-dir/ |wc -l 100000 $ time git ls-files --others --exclude-standard --error-unmatch \ -- ':/*' >/dev/null 2>/dev/null real 0m0.955s user 0m0.936s sys 0m0.016s Eliminate this delay by additionally passing the '--directory --no-empty-directory' options to 'git ls-files' to show only the name of non-empty untracked directories instead of all their content: $ time git ls-files --others --exclude-standard --directory \ --no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null real 0m0.010s user 0m0.008s sys 0m0.000s This follows suit of ea95c7b8f5 (completion: improve untracked directory filtering for filename completion, 2013-09-18). Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-15Merge branch 'jc/prompt-document-ps1-state-separator' into maintLibravatar Junio C Hamano1-0/+4
Docfix. * jc/prompt-document-ps1-state-separator: git-prompt.sh: document GIT_PS1_STATESEPARATOR
2015-07-01Merge branch 'jc/prompt-document-ps1-state-separator'Libravatar Junio C Hamano1-0/+4
Docfix. * jc/prompt-document-ps1-state-separator: git-prompt.sh: document GIT_PS1_STATESEPARATOR
2015-06-10git-prompt.sh: document GIT_PS1_STATESEPARATORLibravatar Joe Cridge1-0/+4
The environment variable GIT_PS1_STATESEPARATOR can be used to set the separator between the branch name and the state symbols in the prompt. At present the variable is not mentioned in the inline documentation which makes it difficult for the casual user to identify. Signed-off-by: Joe Cridge <joe.cridge@me.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-25Merge branch 'ct/prompt-untracked-fix'Libravatar Junio C Hamano1-1/+1
The prompt script (in contrib/) did not show the untracked sign when working in a subdirectory without any untracked files. * ct/prompt-untracked-fix: git prompt: use toplevel to find untracked files
2015-03-15git prompt: use toplevel to find untracked filesLibravatar Cody A Taylor1-1/+1
The __git_ps1() prompt function would not show an untracked state when all the untracked files are outside the current working directory. Signed-off-by: Cody A Taylor <codemister99@yahoo.com> Helped-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-14Merge branch 'tf/prompt-preserve-exit-status'Libravatar Junio C Hamano1-5/+5
Using the exit status of the last command in the prompt, e.g. PS1='$(__git_ps1) $? ', did not work well because the helper function stomped on the exit status. * tf/prompt-preserve-exit-status: git-prompt: preserve value of $? in all cases
2015-01-14Merge branch 'rh/hide-prompt-in-ignored-directory'Libravatar Junio C Hamano1-7/+17
* rh/hide-prompt-in-ignored-directory: git-prompt.sh: allow to hide prompt for ignored pwd git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
2015-01-14git-prompt: preserve value of $? in all casesLibravatar Tony Finch1-4/+4
Signed-off-by: Tony Finch <dot@dotat.at> Reviewed-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-07Merge branch 'tf/prompt-preserve-exit-status'Libravatar Junio C Hamano1-0/+4
Using the exit status of the last command in the prompt, e.g. PS1='$(__git_ps1) $? ', did not work well because the helper function stomped on the exit status. * tf/prompt-preserve-exit-status: git-prompt: preserve value of $? inside shell prompt
2015-01-07git-prompt.sh: allow to hide prompt for ignored pwdLibravatar Jess Austin1-0/+13
Optionally set __git_ps1 to display nothing when present working directory is ignored, triggered by the new environment variable GIT_PS1_HIDE_IF_PWD_IGNORED. This environment variable may be overridden on any repository by setting bash.hideIfPwdIgnored to "false". In the absence of GIT_PS1_HIDE_IF_PWD_IGNORED this change has no effect. Many people manage e.g. dotfiles in their home directory with git. This causes the prompt generated by __git_ps1 to refer to that "top level" repo while working in any descendant directory. That can be distracting, so this patch helps one shut off that noise. Signed-off-by: Jess Austin <jess.austin@gmail.com> Signed-off-by: Richard Hansen <rhansen@bbn.com> Reviewed-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-07git-prompt.sh: if pc mode, immediately set PS1 to a plain promptLibravatar Richard Hansen1-7/+4
At the beginning of __git_ps1, right after determining that the function is running in pc mode, set PS1 to a plain (undecorated) prompt. This makes it possible to simply return early without having to set PS1 if the prompt should not be decorated. Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-22Merge branch 'jg/prompt-localize-temporary'Libravatar Junio C Hamano1-1/+1
"git-prompt" (in contrib/) used a variable from the global scope, possibly contaminating end-user's namespace. * jg/prompt-localize-temporary: git-prompt.sh: make $f local to __git_eread()
2014-12-22git-prompt: preserve value of $? inside shell promptLibravatar Tony Finch1-0/+4
If you have a prompt which displays the command exit status, __git_ps1 without this change corrupts it, although it has the correct value in the parent shell: ~/src/git (master) 0 $ set | grep ^PS1 PS1='\w$(__git_ps1) $? \$ ' ~/src/git (master) 0 $ false ~/src/git (master) 0 $ echo $? 1 ~/src/git (master) 0 $ There is a slightly ugly workaround: ~/src/git (master) 0 $ set | grep ^PS1 PS1='\w$(x=$?; __git_ps1; exit $x) $? \$ ' ~/src/git (master) 0 $ false ~/src/git (master) 1 $ This change makes the workaround unnecessary. Signed-off-by: Tony Finch <dot@dotat.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-12git-prompt.sh: make $f local to __git_eread()Libravatar Justin Guenther1-1/+1
This function uses (non-local) $f to store the value of its first parameter. This can interfere with the user's environment. Signed-off-by: Justin Guenther <jguenther@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-25git-prompt: do not look for refs/stash in $GIT_DIRLibravatar Jeff King1-1/+2
Since dd0b72c (bash prompt: use bash builtins to check stash state, 2011-04-01), git-prompt checks whether we have a stash by looking for $GIT_DIR/refs/stash. Generally external programs should never do this, because they would miss packed-refs. That commit claims that packed-refs does not pack refs/stash, but that is not quite true. It does pack the ref, but due to a bug, fails to prune the ref. When we fix that bug, we would want to be doing the right thing here. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-19Merge branch 'rh/prompt-pcmode-avoid-eval-on-refname'Libravatar Junio C Hamano1-17/+39
* rh/prompt-pcmode-avoid-eval-on-refname: git-prompt.sh: don't assume the shell expands the value of PS1
2014-05-19git-prompt.sh: don't assume the shell expands the value of PS1Libravatar Richard Hansen1-17/+39
Not all shells subject the prompt string to parameter expansion. Test whether the shell will expand the value of PS1, and use the result to control whether raw ref names are included directly in PS1. This fixes a regression introduced in commit 8976500 ("git-prompt.sh: don't put unsanitized branch names in $PS1"): zsh does not expand PS1 by default, but that commit assumed it did. The bug resulted in prompts containing the literal string '${__git_ps1_branch_name}' instead of the actual branch name. Reported-by: Caleb Thompson <caleb@calebthompson.io> Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-13Merge branch 'fc/prompt-zsh-read-from-file'Libravatar Junio C Hamano1-8/+8
* fc/prompt-zsh-read-from-file: contrib: completion: fix 'eread()' namespace
2014-05-13contrib: completion: fix 'eread()' namespaceLibravatar Felipe Contreras1-8/+8
Otherwise it might collide with a function of the same name in the user's environment. Suggested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-02Merge branch 'rh/prompt-pcmode-avoid-eval-on-refname'Libravatar Junio C Hamano1-2/+32
* rh/prompt-pcmode-avoid-eval-on-refname: git-prompt.sh: don't put unsanitized branch names in $PS1
2014-04-22git-prompt.sh: don't put unsanitized branch names in $PS1Libravatar Richard Hansen1-2/+32
Both bash and zsh subject the value of PS1 to parameter expansion, command substitution, and arithmetic expansion. Rather than include the raw, unescaped branch name in PS1 when running in two- or three-argument mode, construct PS1 to reference a variable that holds the branch name. Because the shells do not recursively expand, this avoids arbitrary code execution by specially-crafted branch names such as '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)'. Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-14prompt: fix missing file errors in zshLibravatar Felipe Contreras1-7/+14
zsh seems to have a bug while redirecting the stderr of the 'read' command: % read foo 2>/dev/null <foo zsh: no such file or directory: foo Which causes errors to be displayed when certain files are missing. Let's add a convenience function to manually check if the file is readable before calling "read". Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-28Merge branch 'sg/prompt-svn-remote-fix'Libravatar Junio C Hamano1-1/+1
Bash portability fix. * sg/prompt-svn-remote-fix: bash prompt: don't use '+=' operator in show upstream code path
2013-10-15bash prompt: don't use '+=' operator in show upstream code pathLibravatar SZEDER Gábor1-1/+1
The '+=' operator is not supported by old Bash versions (3.0) we still care about. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-14git-prompt.sh: optionally show upstream branch nameLibravatar Julien Carsique1-1/+6
When working with multiple remotes, it is common to switch the upstream from a remote to another. Doing so, the prompt may not be the expected one. Providing an option to display tracking information sounds useful. Add a "name" option to GIT_PS1_SHOWUPSTREAM which will show the upstream abbrev name. This option is ignored if "verbose" is false. Signed-off-by: Julien Carsique <julien.carsique@gmail.com> Improved-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-08-22contrib/git-prompt.sh: handle missing 'printf -v' more gracefullyLibravatar Brandon Casey1-1/+5
Old Bash (3.0) which is distributed with RHEL 4.X and other ancient platforms that are still in wide use, do not have a printf that supports -v. Neither does Zsh (which is already handled in the code). As suggested by Junio, let's test whether printf supports the -v option and store the result. Then later, we can use it to determine whether 'printf -v' can be used, or whether printf must be called in a subshell. Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-01Merge branch 'ed/color-prompt'Libravatar Junio C Hamano1-70/+41
Code clean-up for in-prompt status script (in contrib/). * ed/color-prompt: git-prompt.sh: add missing information in comments git-prompt.sh: do not print duplicate clean color code t9903: remove redundant tests git-prompt.sh: refactor colored prompt code t9903: add tests for git-prompt pcmode
2013-06-26git-prompt.sh: add missing information in commentsLibravatar Eduardo R. D'Avila1-11/+15
Mention that the command below is needed for prompt in ZSH with PS1: setopt PROMPT_SUBST Rephrase some parts that mention only the "current branch name" being displayed in the prompt. Replace it by stating that the "repository status" is displayed. Make it clear that colored prompt is only available in PROMPT_COMMAND/precmd mode. With-suggestions-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26git-prompt.sh: do not print duplicate clean color codeLibravatar Eduardo R. D'Avila1-1/+1
Do not print a duplicate clean color code when there is no other indicators other than the current branch in colored prompt. Acked-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26git-prompt.sh: refactor colored prompt codeLibravatar Eduardo R. D'Avila1-59/+26
__git_ps1_colorize_gitstring() sets color codes and builds the prompt gitstring. It has duplicated code to handle color codes for bash and zsh shells. __git_ps1() also has duplicated logic to build the prompt gitstring. Remove duplication of logic to build gitstring in __git_ps1_colorize_gitstring() and __git_ps1(). Leave in __git_ps1_colorize_gitstring() only logic to set color codes. Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-24bash prompt: mention that PROMPT_COMMAND mode is fasterLibravatar SZEDER Gábor1-5/+5
__git_ps1() is usually added to the prompt inside a command substitution, imposing the overhead of fork()ing a subshell. Using __git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids that command substitution. Mention this in the comments about setting up the git prompt. The whole series speeds up the bash prompt on Windows/MSysGit considerably. Here are some timing results in three scenarios, each repeated 10 times: At the top of the work tree, before: $ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done real 0m1.716s user 0m0.301s sys 0m0.772s After: real 0m0.687s user 0m0.075s sys 0m0.396s After, from $PROMPT_COMMAND: $ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done real 0m0.546s user 0m0.075s sys 0m0.181s At the top of the work tree, detached head, before: real 0m2.574s user 0m0.376s sys 0m1.207s After: real 0m1.139s user 0m0.151s sys 0m0.500s After, from $PROMPT_COMMAND: real 0m1.030s user 0m0.245s sys 0m0.336s In a subdirectory, during rebase, stash status indicator enabled, before: real 0m3.557s user 0m0.495s sys 0m1.767s After: real 0m0.717s user 0m0.120s sys 0m0.300s After, from $PROMPT_COMMAND: real 0m0.577s user 0m0.047s sys 0m0.258s On Linux the speedup ratio is comparable to Windows, but overall it was about an order of magnitude faster to begin with. The last case from above, repeated 100 times, before: $ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done real 0m2.806s user 0m0.180s sys 0m0.264s After: real 0m0.857s user 0m0.020s sys 0m0.028s Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: avoid command substitution when finalizing gitstringLibravatar SZEDER Gábor1-1/+5
Before setting $PS1, __git_ps1() uses a command substitution to redirect the output from a printf into a variable. Spare the overhead of fork()ing a subshell by using 'printf -v <var>' to directly assign the output to that variable. zsh's printf doesn't support the '-v <var>' option, so stick with the command substitution when under zsh. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: avoid command substitution when checking for untracked filesLibravatar SZEDER Gábor1-1/+1
When enabled, the bash prompt can indicate the presence of untracked files with a '%' sign. __git_ps1() checks for untracked files by running the '$(git ls-files --others --exclude-standard)' command substitution, and displays the indicator when there is no output. Avoid this command substitution by additionally passing '--error-unmatch *', and checking the command's return value. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: use bash builtins to check stash stateLibravatar SZEDER Gábor1-2/+3
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set __git_ps1() checks the presence of stashes by running 'git rev-parse --verify refs/stash'. This command not only checks that the 'refs/stash' ref exists but also, well, verifies that it's a valid ref. However, we don't need to be that thorough for the bash prompt. We can omit that verification and only check whether 'refs/stash' exists or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter of checking the existence of a ref file. Perform this check using only bash builtins to spare the overhead of fork()+exec()ing a git process. Also run 'git pack-refs --all' in the corresponding test to document that the prompt script depends on 'git pack-refs' not packing 'refs/stash' and to catch possible breakages should this behavior ever change. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: use bash builtins to check for unborn branch for dirty stateLibravatar SZEDER Gábor1-1/+1
When the dirty work tree and index status indicator is enabled, __git_ps1() checks for changes in the index by running 'git diff-index --cached --quiet HEAD --' and looking at its exit code. However, that makes sense only when HEAD points to a valid commit: on an unborn branch the failure of said command would be caused by the invalid HEAD, not by changes in the index. Therefore, __git_ps1() first checks for a valid HEAD by running 'git rev-parse --quiet --verify HEAD'. Since the previous patch we implicitly check HEAD's validity by running 'git rev-parse ... --short HEAD', making the dirty status indicator's 'git rev-parse' check redundant. It's sufficient to check for non-emptyness of the variable holding the abbreviated commit object name, thereby sparing the overhead of fork()+exec()ing a git process. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: combine 'git rev-parse' for detached headLibravatar SZEDER Gábor1-4/+12
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE environment variable fails, __git_ps1() now runs the '$(git rev-parse --short HEAD)' command substitution to get the abbreviated detached HEAD commit object name. This imposes the overhead of fork()ing a subshell and fork()+exec()ing a git process. Avoid this overhead by combining this command substitution with the "main" 'git rev-parse' execution for getting the path to the .git directory & co. This means that we'll look for the abbreviated commit object name even when it's not necessary, because we're on a branch or the detached HEAD can be described. It doesn't matter, however, because once 'git rev-parse' is up and running to fulfill all those other queries, the additional overhead of looking for the abbreviated commit object name is not measurable because it's lost in the noise. There is a caveat, however, when we are on an unborn branch, because in that case HEAD doesn't point to a valid commit, hence the query for the abbreviated commit object name fails. Therefore, '--short HEAD' must be the last options to 'git rev-parse' in order to get all the other necessary information for the prompt even on an unborn branch. Furthermore, in that case, and in that case only, 'git rev-parse' doesn't output the last line containing the abbreviated commit object name, obviously, so we have to take care to only parse it if 'git rev-parse' exited without any error. Although there are tests already excercising __git_ps1() on unborn branches, they all do so implicitly. Add a test that checks this explicitly. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: combine 'git rev-parse' executions in the main code pathLibravatar SZEDER Gábor1-5/+13
There are a couple of '$(git rev-parse --<opt>)' command substitutions in __git_ps1() and three of them are executed in the main code path: - the first to get the path to the .git directory ('--git-dir'), - the second to check whether we're inside the .git directory ('--is-inside-git-dir'), - and the last, depending on the results of the second, either * to check whether it's a bare repo ('--is-bare-repository'), or * to check whether inside a work tree ('--is-inside-work-tree'). Naturally, this imposes the overhead of fork()ing three subshells and fork()+exec()ing three git commands. Combine these four 'git rev-parse' queries into a single one and use bash parameter expansions to parse the combined output, i.e. to separate the path to the .git directory from the true/false of '--is-inside-git-dir', etc. This way we can eliminate two of the three subshells and git commands. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: use bash builtins to find out current branchLibravatar SZEDER Gábor1-18/+33
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution to find out whether we are on a branch and to find out the name of that branch. This imposes the overhead of fork()ing a subshell and fork()+exec()ing a git process. Since HEAD is in most cases a single-line file and the symbolic ref format is quite simple to recognize and parse, read and parse it using only bash builtins, thereby sparing all that fork()+exec() overhead. Don't display the git prompt if reading HEAD fails, because a readable HEAD is required for a git repository. HEAD can also be a symlink symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins for reading HEAD only when HEAD is not a symlink. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: use bash builtins to find out rebase stateLibravatar SZEDER Gábor1-6/+6
During an ongoing interactive rebase __git_ps1() finds out the name of the rebased branch, the total number of patches and the number of the current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command substitution for each. That is not quite the most efficient way to read single line single word files, because it imposes the overhead of fork()ing a subshell and fork()+exec()ing 'cat' several times. Use the 'read' bash builtin instead to avoid those overheads. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: run 'git rev-parse --git-dir' directly instead of __gitdir()Libravatar SZEDER Gábor1-25/+1
__git_ps1() finds out the path to the repository by using the __gitdir() helper function. __gitdir() is basically just a wrapper around 'git rev-parse --git-dir', extended with support for recognizing a remote repository given as argument, to use the path given on the command line, and with a few shortcuts to recognize a git repository in cwd or at $GIT_DIR quickly without actually running 'git rev-parse'. However, the former two is only necessary for the completion script but makes no sense for the bash prompt, while the latter shortcuts are performance optimizations __git_ps1() can do without (they just avoid the overhead of fork()+exec()ing a git process). Run 'git rev-parse --git-dir' directly in __git_ps1(), because it will allow this patch series to combine several $(git rev-parse ...) command substitutions in the main code path, and the overall performance benefit will far outweigh the loss of those few shortcuts in __gitdir(). Furthermore, since __gitdir() is not needed anymore for the prompt, remove it from the prompt script finally eliminating its duplication between the prompt and completion scripts. Also remove the comment from the completion script warning about this code duplication. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: return early from __git_ps1() when not in a git repositoryLibravatar SZEDER Gábor1-100/+101
... to gain one level of indentation for the bulk of the function. (The patch looks quite unreadable, you'd better check it with 'git diff -w'.) Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-24bash prompt: print unique detached HEAD abbreviated object nameLibravatar SZEDER Gábor1-1/+1
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to show the 7 hexdigits abbreviated commit object name in the prompt. Obviously, this neither respects core.abbrev nor produces a unique object name. Fix this by using 'git rev-parse --short HEAD' instead and adjust the corresponding test to use non-standard number of hexdigits. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
2013-06-14prompt: squelch error output from catLibravatar Ramkumar Ramachandra1-6/+6
The files $g/rebase-{merge,apply}/{head-name,msgnum,end} are not guaranteed to exist. When attempting to cat them, squelch the error output. In addition to guarding against stray directories, this patch addresses a real problem: # on terminal 1 $ git rebase -i master # ignore editor, and switch to terminal 2 cat: .git/rebase-merge/msgnum: No such file or directory cat: .git/rebase-merge/end: No such file or directory $ Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-06Merge branch 'fc/show-branch-in-rebase-am'Libravatar Junio C Hamano1-0/+2
The bash prompt code (in contrib/) displayed the name of the branch being rebased when "rebase -i/-m/-p" modes are in use, but not the plain vanilla "rebase". * fc/show-branch-in-rebase-am: prompt: fix for simple rebase
2013-06-05Merge branch 'tg/maint-zsh-svn-remote-prompt'Libravatar Junio C Hamano1-3/+4
zsh prompt script that borrowed from bash prompt script did not work due to slight differences in array variable notation between these two shells. * tg/maint-zsh-svn-remote-prompt: prompt: fix show upstream with svn and zsh