| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
|
|
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
|
|
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
|
|
The command line completion (in contrib/) for "git stash" has been
updated.
* dl/complete-stash:
git-completion.bash: use __gitcomp_builtin() in _git_stash()
git-completion.bash: extract from else in _git_stash()
git-completion.bash: pass $__git_subcommand_idx from __git_main()
|
|
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
|
|
The $subcommand case statement in _git_stash() is quite repetitive.
Consolidate the cases together into one catch-all case to reduce the
repetition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), the $__git_subcommand_idx variable was
introduced. Naming it after the index of the subcommand is needlessly
confusing as, when this variable is used, it is in the completion
functions for commands (e.g. _git_remote()) where for `git remote add`,
the `remote` is referred to as the command and `add` is referred to as
the subcommand.
Rename this variable so that it's obvious it's about git commands. While
we're at it, shorten up its name so that it's still readable without
being a handful to type.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) has learned that
CHERRY_PICK_HEAD is a possible pseudo-ref.
* ab/complete-cherry-pick-head:
bash completion: complete CHERRY_PICK_HEAD
|
|
The command-line completion script (in contrib/) had a couple of
references that would have given a warning under the "-u" (nounset)
option.
* vs/completion-with-set-u:
completion: audit and guard $GIT_* against unset use
|
|
$GIT_COMPLETION_SHOW_ALL and $GIT_TESTING_ALL_COMMAND_LIST were used
without guarding against them being unset, causing errors in nounset
(set -u) mode.
No other nounset-unsafe $GIT_* usages were found.
While at it, remove a superfluous (duplicate) unset guard from $GIT_DIR
in __git_find_repo_path.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When e.g. in a failed cherry pick we did not recognize
CHERRY_PICK_HEAD as we do e.g. REBASE_HEAD in a failed rebase let's
rectify that.
When REBASE_HEAD was added in fbd7a232370 (rebase: introduce and use
pseudo-ref REBASE_HEAD, 2018-02-11) a completion was added for it, but
no corresponding completion existed for CHERRY_PICK_HEAD added in
d7e5c0cbfb0 (Introduce CHERRY_PICK_HEAD, 2011-02-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion for 'git stash' has not changed in a major way since it
was converted from shell script to builtin. Now that it's a builtin, we
can take advantage of the groundwork laid out by parse-options and use
the generated options.
Rewrite _git_stash() to take use __gitcomp_builtin() to generate
completions for subcommands.
The main `git stash` command does not take any arguments directly. If no
subcommand is given, it automatically defaults to `git stash push`. This
means that we can simplify the logic for when no subcommands have been
given yet. We only have to offer subcommand completions when we're
completing a non-option after "stash".
One area that this patch could improve upon is that the `git stash list`
command accepts log-options. It would be nice if the completion for this
were unified with that of _git_log() and _git_show() which would allow
completions to be provided for options such as `--pretty` but that is
outside the scope of this patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To save a level of indentation, perform an early return in the "if" arm
so we can move the "else" code out of the block.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many completion functions perform hardcoded comparisons with $cword.
This fails in the case where the main git command is given arguments
(e.g. `git -C . bundle<TAB>` would fail to complete its subcommands).
Even _git_worktree(), which uses __git_find_on_cmdline(), could still
fail. With something like `git -C add worktree move<TAB>`, the
subcommand would be incorrectly identified as "add" instead of "move".
Assign $__git_subcommand_idx in __git_main(), where the git subcommand
is actually found and the corresponding completion function is called.
Use this variable to replace hardcoded comparisons with $cword.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
|
|
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
|
|
We didn't special-case "branch -M" (with a capital M) the same as
"branch -m", nor any of the "--copy" variants. As a result these offered
any ref as the next candidate, and not just branch names.
Note that I rewrapped case-arm line since it's now quite long, and
likewise the one below it for consistency. I also re-ordered the
existing "-D" to make it more obvious how the cases group together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The former offers not just branches but tags as completion
candidates.
Mimic how "branch -d" limits its suggestion to branch names.
Reported-by: Paul Jolly <paul@myitcv.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When __git_complete was introduced, it was meant to be temporarily, while
a proper guideline for public shell functions was established
(tentatively _GIT_complete), but since that never happened, people
in the wild started to use __git_complete, even though it was marked as
not public.
Eight years is more than enough wait, let's mark this function as
public, and make it a bit more user-friendly.
So that instead of doing:
__git_complete gk __gitk_main
The user can do:
__git_complete gk gitk
And instead of:
__git_complete gf _git_fetch
Do:
__git_complete gf git_fetch
Backwards compatibility is maintained.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
1. We should quote the argument
2. We don't need two redirections
3. A safeguard for arguments (-a) would be good
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the code more readable, and also will help when new code
wants to do similar checks.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for a recent breakage.
* fc/zsh-completion:
completion: bash: fix gitk alias regression
completion: zsh: fix file completion regression
|
|
Long time ago when the _git_complete helper was introduced, _gitk was
replaced with __gitk_main, and a placeholder for backwards compatibility
pointing to __git_wrap_main_gitk was left in place.
When "__git_complete gitk __gitk_main" was called, that created the
__git_wrap__gitk_main helper, which is just basically "__git_func_wrap
__gitk_main" plus `complete` options.
Unfortunately the commit b0a4b2d257 (completion: add support for
backwards compatibility, 2012-05-19) missed a previous instance of a
call to _gitk in _git_gitk
So, basically we had __git_wrap__git_main -> __git_func_wrap __git_main ->
__git_complete_command gitk -> _git_gitk -> _gitk ->
__git_wrap__gitk_main -> __git_func_wrap __gitk_main -> __gitk_main.
There was never any need to call __git_func_wrap twice. Since _git_gitk
is always called inside the wrapper, it can call __gitk_main directly.
And then, in commit 441ecdab37 (completion: bash: remove old compat
wrappers, 2020-10-27) _gitk was removed, which triggers the following
error:
_git_gitk:9: command not found: _gitk
Let's call the correct function: __gitk_main.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is possible for the name of an alias to end with the name of another
alias, in which case the code will incorrectly detect a loop.
We can fix that by adding an extra space between words.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't want to be stuck in an endless cycle.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is possible to have recursive aliases like:
l = log --oneline
lg = l --graph
So the completion should detect such aliases as well.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Zsh autocompletion (in contrib/) update.
* fc/zsh-completion: (29 commits)
zsh: update copyright notices
completion: bash: remove old compat wrappers
completion: bash: cleanup cygwin check
completion: bash: trivial cleanup
completion: zsh: add simple version check
completion: zsh: trivial simplification
completion: zsh: add alias descriptions
completion: zsh: improve command tags
completion: zsh: refactor command completion
completion: zsh: shuffle functions around
completion: zsh: simplify file_direct
completion: zsh: simplify nl_append
completion: zsh: trivial cleanup
completion: zsh: simplify direct compadd
completion: zsh: simplify compadd functions
completion: zsh: fix splitting of words
completion: zsh: add missing direct_append
completion: fix conflict with bashcomp
completion: zsh: fix completion for --no-.. options
completion: bash: remove zsh wrapper
...
|
|
"git diff A...B" learned "git diff --merge-base A B", which is a
longer short-hand to say the same thing.
* dl/diff-merge-base:
contrib/completion: complete `git diff --merge-base`
builtin/diff-tree: learn --merge-base
builtin/diff-index: learn --merge-base
t4068: add --merge-base tests
diff-lib: define diff_get_merge_base()
diff-lib: accept option flags in run_diff_index()
contrib/completion: extract common diff/difftool options
git-diff.txt: backtick quote command text
git-diff-index.txt: make --cached description a proper sentence
t4068: remove unnecessary >tmp
|
|
It's been eight years, more than enough time to move on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid Yoda conditions, and use $OSTYPE.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to set a variable we are not going to use.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been deprecated for more than eight years now, it's never up to
date, and it's a hassle to maintain.
It's time to move on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A function was missing.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" learned to use checkout.guess configuration variable
and enable/disable its "--[no-]guess" option accordingly.
* dl/checkout-guess:
checkout: learn to respect checkout.guess
Documentation/config/checkout: replace sq with backticks
|
|
Many callers append a space suffix, but zsh automatically appends a
space, making the completion add two spaces, for example:
git log ma<tab>
Will complete 'master '.
Let's remove that extra space.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current behavior of git checkout/switch is that --guess is currently
enabled by default. However, some users may not wish for this to happen
automatically. Instead of forcing users to specify --no-guess manually
each time, teach these commands the checkout.guess configuration
variable that gives users the option to set a default behavior.
Teach the completion script to recognize the new config variable and
disable DWIM logic if it is set to false.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Robert Karszniewicz <avoidr@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the same time also deduplicate those options from command completions
which use $__git_diff_common_options.
Signed-off-by: Robert Karszniewicz <avoidr@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently only the long version (--source=) supports completion.
Add completion support to the short (-s) option too.
Signed-off-by: Ákos Uzonyi <uzonyi.akos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In both _git_checkout and _git_switch a new "prevword" variable were
introduced, however the "prev" variable already contains the last word.
The "prevword" variable is replaced with "prev", and the case is moved
to the beginning of the function, like it's done in many other places
(e.g. _git_commit). Also the indentaion of the case is fixed.
Signed-off-by: Ákos Uzonyi <uzonyi.akos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion for format-patch currently suggests --base=, --interdiff=
and --range-diff= as options. However, with these `=` forms of the
options, there is no space and we'd enter the `--*` case which means we
don't call the __git_complete_revlist() at the end.
Teach _git_format_patch() to complete refs in the case of --base=,
--interdiff= and --range-diff=.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
difftool parses its own options and then passes the remaining options
onto diff. As a result, they share common command-line options. Instead
of duplicating the list, use a shared $__git_diff_difftool_options list.
The completion for diff is missing --relative and the completion for
difftool is missing --no-index. Add both of these to the common list.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
David Aguilar
Junio C Hamano
Đoàn Trần Công Danh
Sardorbek Imomaliev
Denton Liu
Ville Skyttä
Ævar Arnfjörð Bjarmason
Jeff King
Felipe Contreras
Robert Karszniewicz
Ákos Uzonyi