| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
No need to calculate a new $c with a space if we are not going to do
anything it with it.
There should be no functional changes, except that a word "foo " with no
suffixes can't be matched. But $cur cannot have a space at the end
anyway. So it's safe.
Based on the code from SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no point in calling a separate function that is only used
in one place. Especially considering that there's no need to call
compgen, and we traverse the words ourselves both in __gitcompadd,
and __gitcomp_1.
Let's squash the functions together, and traverse only once.
This improves performance. For N number of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.005s
new: 0.001s
== 100 ==
original: 0.009s
new: 0.006s
== 1000 ==
original: 0.027s
new: 0.019s
== 10000 ==
original: 0.163s
new: 0.151s
== 100000 ==
original: 1.555s
new: 1.497s
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea is to never touch the COMPREPLY variable directly.
This allows other completion systems (i.e. zsh) to override
__gitcompadd, and do something different instead.
Also, this allows further optimizations down the line.
There should be no functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no functional reason for those, the only purpose they are
supposed to serve is to say "we don't provide any words here", but
even for that it's not used consistently.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
|
|
* mp/complete-paths:
git-completion.bash: zsh does not implement function redirection correctly
|
|
A recent change added functions whose entire standard error stream
is redirected to /dev/null using a construct that is valid POSIX.1
but is not widely used:
funcname () {
cd "$1" && run some command "$2"
} 2>/dev/null
Even though this file is "git-completion.bash", zsh completion
support dot-sources it (instead of asking bash to grok it like tcsh
completion does), and zsh does not implement this redirection
correctly.
With zsh, trying to complete an inexistant directory gave this:
git add no-such-dir/__git_ls_files_helper:cd:2: no such file or directory: no-such-dir/
Also these functions use "cd" to first go somewhere else before
running a command, but the location the caller wants them to go that
is given as an argument to them should not be affected by CDPATH
variable the users may have set for their interactive session.
To fix both of these, wrap the body of the function in a subshell,
unset CDPATH at the beginning of the subshell, and redirect the
standard error stream of the subshell to /dev/null.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
|
|
This needs to be done in two places: __git_config_get_set_variables to
allow clever completion of "git config --local --get foo<tab>", and
_git_config to allow "git config --loc<tab>" to complete to --local.
While we're there, change the order of options in the code to match
git-config.txt.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion script used to let the default completer to suggest
pathnames, which gave too many irrelevant choices (e.g. "git add"
would not want to add an unmodified path). Teach it to use a more
git-aware logic to enumerate only relevant ones.
* mp/complete-paths:
git-completion.bash: add support for path completion
|
|
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
|
|
Fix use of an array notation that older versions of bash do not
understand.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
|
|
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
Based on an idea by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
|
|
When commit d8b45314 began separating the zsh completion from the bash
completion, it introduced a zsh completion "bridge" section into the bash
completion script for zsh users to use until they migrated to the zsh
script. The zsh '+=()' append-to-array notation prevents bash 3.00.15 on
CentOS 4.x from loading the completion script and breaks test 9902. We can
easily work around this by using standard Bash array notation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An internal ls-tree call made by completion code only to probe if
a path exists in the tree recorded in a commit object leaked error
messages when the path is not there. It is not an error at all and
should not be shown to the end user.
* ds/completion-silence-in-tree-path-probe:
git-completion.bash: silence "not a valid object" errors
|
|
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though --patience was already there, we missed --minimal and
--histogram for some reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-completion.bash script did not implemented full, git aware,
support to complete paths, for git commands that operate on files within
the current working directory or the index.
As an example:
git add <TAB>
will suggest all files in the current working directory, including
ignored files and files that have not been modified.
Support path completion, for git commands where the non-option arguments
always refer to paths within the current working directory or the index,
as follows:
* the path completion for the "git rm" and "git ls-files"
commands will suggest all cached files.
* the path completion for the "git add" command will suggest all
untracked and modified files. Ignored files are excluded.
* the path completion for the "git clean" command will suggest all
untracked files. Ignored files are excluded.
* the path completion for the "git mv" command will suggest all cached
files when expanding the first argument, and all untracked and cached
files for subsequent arguments. In the latter case, empty directories
are included and ignored files are excluded.
* the path completion for the "git commit" command will suggest all
files that have been modified from the HEAD, if HEAD exists, otherwise
it will suggest all cached files.
For all affected commands, completion will always stop at directory
boundary. Only standard ignored files are excluded, using the
--exclude-standard option of the ls-files command.
When using a recent Bash version, Git path completion will be the same
as builtin file completion, e.g.
git add contrib/
will suggest relative file names.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trying to complete the command
git show master:./file
would cause a "Not a valid object name" error to be output on standard
error. Silence the error so it won't appear on the command line.
Signed-off-by: Dylan Smith <dylan.ah.smith@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This works in a similar manner to git-check-attr.
Thanks to Jeff King and Junio C Hamano for the idea:
http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "-c" and "-C" options take an existing commit, so let's
complete refs, just as we would for --squash or --fixup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* fc/zsh-completion:
completion: start moving to the new zsh completion
completion: add new zsh completion
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sg/complete-help-undup:
completion: remove 'help' duplicate from porcelain commands
|
|
|
|
The user can be presented with invalid completion results
when trying to complete a 'git checkout' command. This can happen
when using a branch name prefix that matches multiple remote branches.
For example, if available branches are:
master
remotes/GitHub/maint
remotes/GitHub/master
remotes/origin/maint
remotes/origin/master
When performing completion on 'git checkout ma' the user will be
given the choices:
maint
master
However, 'git checkout maint' will fail in this case, although
completion previously said 'maint' was valid. Furthermore, when
performing completion on 'git checkout mai', no choices will be
suggested. So, the user is first told that the branch name
'maint' is valid, but when trying to complete 'mai' into 'maint',
that completion is no longer valid.
The completion results should never propose 'maint' as a valid
branch name, since 'git checkout' will refuse it.
The reason for this bug is that the uniq program only
works with sorted input. The man page states
"uniq prints the unique lines in a sorted file".
When __git_refs uses the guess heuristic employed by checkout for
tracking branches it wants to consider remote branches but only if
the branch name is unique. To do that, it calls 'uniq -u'. However
the input given to 'uniq -u' is not sorted.
Therefore, in the above example, when dealing with 'git checkout ma',
"__git_refs '' 1" will find the following list:
master
maint
master
maint
master
which, when passed to 'uniq -u' will remain the same. Therefore
'maint' will be wrongly suggested as a valid option.
When dealing with 'git checkout mai', the list will be:
maint
maint
which happens to be sorted and will be emptied by 'uniq -u',
properly ignoring 'maint'.
A solution for preventing the completion script from suggesting
such invalid branch names is to first call 'sort' and then 'uniq -u'.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Zsh's bash completion emulation is buggy, not properly maintained, and
we have some workarounds in place for different bugs that appeared in
various versions.
Since I'm the only one that has worked on that code lately[1], it might make
snese to use the code I wrote specifically for git.
The advantages are:
1) Less workarounds
* No need to hack __get_comp_words_by_ref
* No need to hack IFS or words
2) Improved features
* 'git show master' now properly adds a space at the end (IFS bug)
* 'git checkout --conflict=' now properly returns the sub-items
(missing feature)
3) Consolidated code
* It's all now in a single chunk, and it's basically the same as
git-completion.zsh
Since there's some interest in moving the zsh-specific code out of this
script, lets go ahead and warn the users that they should be using
git-completion.zsh.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=history;f=Completion/bashcompinit
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of all git commands is computed from the output of 'git help
-a', which already includes 'help', so there is no need to explicitly
add it once more when computing the list of porcelain commands.
Note that 'help' wasn't actually offered twice because of this,
because Bash filters duplicates from possible completion words.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Revert "completion: fix shell expansion of items"
|
|
This reverts commit 25ae7cfd19c8f21721363c64163cd5d9d1135b20.
That patch does fix expansion of weird variables in some
simple tests, but it also seems to break other things, like
expansion of refs by "git checkout".
While we're sorting out the correct solution, we are much
better with the original bug (people with metacharacters in
their completions occasionally see an error message) than
the current bug (ref completion does not work at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Document signature showing options
completion: fix shell expansion of items
|
|
* nd/maint-remote-remove:
remote: prefer subcommand name 'remove' to 'rm'
|
|
As reported by Jeroen Meijer[1]; the current code doesn't deal properly
with items (tags, branches, etc.) that have ${} in them because they get
expaned by bash while using compgen.
A simple solution is to quote the items so they get expanded properly
(\$\{\}).
In order to achieve that I took bash-completion's quote() function,
which is rather simple, and renamed it to __git_quote() as per Jeff
King's suggestion.
Solves the original problem for me.
[1] http://article.gmane.org/gmane.comp.version-control.git/201596
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
|
|
Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to the recently graduated topic to introduce
"git branch --set-upstream-to" option.
* cn/branch-set-upstream-to:
completion: complete branch name for "branch --set-upstream-to="
completion: add --set-upstream-to and --unset-upstream
|
|
* nd/maint-remote-remove:
remote: prefer subcommand name 'remove' to 'rm'
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove --set-upstream as it's deprecated now.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git difftool --dir-diff" learned to use symbolic links to prepare
temporary copy of the working tree when available.
* da/difftool-updates:
difftool: silence warning
Add Code Compare v2.80.4 as a merge / diff tool for Windows
mergetool,difftool: Document --tool-help consistently
difftool: Disable --symlinks on cygwin
difftool: Handle compare() returning -1
difftool: Wrap long lines for readability
difftool: Check all return codes from compare()
difftool: Handle finding mergetools/ in a path with spaces
difftool: Use symlinks when diffing against the worktree
difftool: Call the temp directory "git-difftool"
difftool: Move option values into a hash
difftool: Eliminate global variables
difftool: Simplify print_tool_help()
|
|
Code Compare is a commercial file comparison tool for Windows, see
http://www.devart.com/codecompare/
Version 2.80.4 added support for command line arguments preceded by a
dash instead of a slash. This is required for Git for Windows because
slashes in command line arguments get mangled with according to these
rules:
http://www.mingw.org/wiki/Posix_path_conversion
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Felipe Contreras
Junio C Hamano
Matthieu Moy
Jens Lehmann
Brandon Casey
Michal Privoznik
Manlio Perillo
Dylan Smith
Adam Spiers
Jeff King
Ralf Thielow
Marc Khouzam
SZEDER Gábor
Yacine Belkadi
Michael J Gruber
Carlos Martín Nieto
Nguyễn Thái Ngọc Duy
Sebastian Schuberth