summaryrefslogtreecommitdiff
path: root/connect.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-04Merge branch 'hv/remote-end-hung-up'Libravatar Junio C Hamano1-1/+17
When we get disconnected while expecting a response from the remote side because authentication failed, we issued an error message "The remote side hung up unexpectedly." Give hint that it may be a permission problem in the message when we can reasonably suspect it. * hv/remote-end-hung-up: remove the impression of unexpectedness when access is denied
2012-06-19remove the impression of unexpectedness when access is deniedLibravatar Heiko Voigt1-1/+17
If a server accessed through ssh is denying access git will currently issue the message "fatal: The remote end hung up unexpectedly" as the last line. This sounds as if something really ugly just happened. Since this is a quite typical situation in which users regularly get we do not say that if it happens at the beginning when reading the remote heads. If its in the very first beginning of reading the remote heads it is very likely an authentication error or a missing repository. If it happens later during reading the remote heads we still indicate that it happened during this initial contact phase. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-13git: Wrong parsing of ssh urls with IPv6 literals ignores portLibravatar René Scharfe1-1/+1
If we encounter an address part shaped like "[HOST]:PORT", we skip the opening bracket and replace the closing one with a NUL. The variable host then points to HOST and we've cut off the PORT part. Thus, when we go looking for it using host a bit later, we can't find it. Start at end instead, which either points to the colon, if present, or is equal to host. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08server_supports(): parse feature list more carefullyLibravatar Junio C Hamano1-2/+21
We have been carefully choosing feature names used in the protocol extensions so that the vocabulary does not contain a word that is a substring of another word, so it is not a real problem, but we have recently added "quiet" feature word, which would mean we cannot later add some other word with "quiet" (e.g. "quiet-push"), which is awkward. Let's make sure that we can eventually be able to do so by teaching the clients and servers that feature words consist of non whitespace letters. This parser also allows us to later add features with parameters e.g. "feature=1.5" (parameter values need to be quoted for whitespaces, but we will worry about the detauls when we do introduce them). Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-22Merge branch 'jk/git-prompt'Libravatar Junio C Hamano1-44/+0
* jk/git-prompt: contrib: add credential helper for OS X Keychain Makefile: OS X has /dev/tty Makefile: linux has /dev/tty credential: use git_prompt instead of git_getpass prompt: use git_terminal_prompt add generic terminal prompt function refactor git_getpass into generic prompt function move git_getpass to its own source file imap-send: don't check return value of git_getpass imap-send: avoid buffer overflow Conflicts: Makefile
2011-12-19Merge branch 'ew/keepalive'Libravatar Junio C Hamano1-0/+13
* ew/keepalive: enable SO_KEEPALIVE for connected TCP sockets
2011-12-13connect.c: drop path_match functionLibravatar Jeff King1-21/+0
This function was used for comparing local and remote ref names during fetch (which makes it a candidate for "most confusingly named function of the year"). It no longer has any callers, so let's get rid of it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13drop "match" parameter from get_remote_headsLibravatar Jeff King1-3/+0
The get_remote_heads function reads the list of remote refs during git protocol session. It dates all the way back to def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04). At that time, the idea was to come up with a list of refs we were interested in, and then filter the list as we got it from the remote side. Later, 1baaae5 (Make maximal use of the remote refs, 2005-10-28) stopped filtering at the get_remote_heads layer, letting us use the non-matching refs to find common history. As a result, all callers now simply pass an empty match list (and any future callers will want to do the same). So let's drop these now-useless parameters. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-12move git_getpass to its own source fileLibravatar Jeff King1-44/+0
This is currently in connect.c, but really has nothing to do with the git protocol itself. Let's make a new source file all about prompting the user, which will make it cleaner to refactor. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05enable SO_KEEPALIVE for connected TCP socketsLibravatar Eric Wong1-0/+13
Sockets may never receive notification of some link errors, causing "git fetch" or similar processes to hang forever. Enabling keepalive messages allows hung processes to error out after a few minutes/hours depending on the keepalive settings of the system. This is a problem noticed when running non-interactive cronjobs to mirror repositories using "git fetch". Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_ref_format() to take a flags argumentLibravatar Michael Haggerty1-1/+1
Change check_ref_format() to take a flags argument that indicates what is acceptable in the reference name (analogous to "git check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This is more convenient for callers and also fixes a failure in the test suite (and likely elsewhere in the code) by enabling "onelevel" and "refspec-pattern" to be allowed independently of each other. Also rename check_ref_format() to check_refname_format() to make it obvious that it deals with refnames rather than references themselves. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-11Merge branch 'dz/connect-error-report' into maintLibravatar Junio C Hamano1-14/+11
* dz/connect-error-report: Do not log unless all connect() attempts fail
2011-08-01connect: only log if all attempts failed (ipv4)Libravatar Erik Faye-Lund1-13/+10
In 63a995b (Do not log unless all connect() attempts fail), a mechanism to only log connection errors if all attempts failed was introduced for the IPv6 code-path, but not for the IPv4 one. Introduce a matching mechanism so IPv4-users also benefit from this noise-reduction. Move the call to socket after filling in sa, to make it more apparent that errno can't change in between. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-01Merge branch 'maint' into ef/ipv4-connect-error-reportLibravatar Junio C Hamano1-1/+1
* maint: connect: correctly number ipv6 network adapter
2011-08-01connect: correctly number ipv6 network adapterLibravatar Erik Faye-Lund1-1/+1
In ba50532, the variable 'cnt' was added to both the IPv6 and the IPv4 version of git_tcp_connect_sock, intended to identify which network adapter the connection failed on. But in the IPv6 version, the variable was never increased, leaving it constantly at zero. This behaviour isn't very useful, so let's fix it by increasing the variable at every loop-iteration. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-14Do not log unless all connect() attempts failLibravatar Dave Zarzycki1-14/+11
IPv6 hosts are often unreachable on the primarily IPv4 Internet and therefore we shouldn't print an error if there are still other hosts we can try to connect() to. This helps "git fetch --quiet" stay quiet. Signed-off-by: Dave Zarzycki <zarzycki@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19Merge branch 'jk/git-connection-deadlock-fix'Libravatar Junio C Hamano1-14/+21
* jk/git-connection-deadlock-fix: test core.gitproxy configuration send-pack: avoid deadlock on git:// push with failed pack-objects connect: let callers know if connection is a socket connect: treat generic proxy processes like ssh processes Conflicts: connect.c
2011-05-16connect: let callers know if connection is a socketLibravatar Jeff King1-1/+6
They might care because they want to do a half-duplex close. With pipes, that means simply closing the output descriptor; with a socket, you must actually call shutdown. Instead of exposing the magic no_fork child_process struct, let's encapsulate the test in a function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-16connect: treat generic proxy processes like ssh processesLibravatar Jeff King1-13/+15
The git_connect function returns two ends of a pipe for talking with a remote, plus a struct child_process representing the other end of the pipe. If we have a direct socket connection, then this points to a special "no_fork" child process. The code path for doing git-over-pipes or git-over-ssh sets up this child process to point to the child git command or the ssh process. When we call finish_connect eventually, we check wait() on the command and report its return value. The code path for git://, on the other hand, always sets it to no_fork. In the case of a direct TCP connection, this makes sense; we have no child process. But in the case of a proxy command (configured by core.gitproxy), we do have a child process, but we throw away its pid, and therefore ignore its return code. Instead, let's keep that information in the proxy case, and respect its return code, which can help catch some errors (though depending on your proxy command, it will be errors reported by the proxy command itself, and not propagated from git commands. Still, it is probably better to propagate such errors than to ignore them). It also means that the child_process field can reliably be used to determine whether the returned descriptors are actually a full-duplex socket, which means we should be using shutdown() instead of a simple close. Signed-off-by: Jeff King <peff@peff.net> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-30Make sure that git_getpass() never returns NULLLibravatar Johannes Schindelin1-2/+6
The result of git_getpass() is used without checking for NULL, so let's just die() instead of returning NULL. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31Allow core.askpass to override SSH_ASKPASS.Libravatar Knut Franke1-1/+2
Modify handling of the 'core.askpass' option so that it has the same effect as GIT_ASKPASS also if SSH_ASKPASS is set. Signed-off-by: Knut Franke <k.franke@science-computing.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31Add a new option 'core.askpass'.Libravatar Anselm Kruis1-1/+3
Setting this option has the same effect as setting the environment variable 'GIT_ASKPASS'. Signed-off-by: Knut Franke <k.franke@science-computing.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'gv/portable'Libravatar Junio C Hamano1-1/+1
* gv/portable: test-lib: use DIFF definition from GIT-BUILD-OPTIONS build: propagate $DIFF to scripts Makefile: Tru64 portability fix Makefile: HP-UX 10.20 portability fixes Makefile: HPUX11 portability fixes Makefile: SunOS 5.6 portability fix inline declaration does not work on AIX Allow disabling "inline" Some platforms lack socklen_t type Make NO_{INET_NTOP,INET_PTON} configured independently Makefile: some platforms do not have hstrerror anywhere git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition test_cmp: do not use "diff -u" on platforms that lack one fixup: do not unconditionally disable "diff -u" tests: use "test_cmp", not "diff", when verifying the result Do not use "diff" found on PATH while building and installing enums: omit trailing comma for portability Makefile: -lpthread may still be necessary when libc has only pthread stubs Rewrite dynamic structure initializations to runtime assignment Makefile: pass CPPFLAGS through to fllow customization Conflicts: Makefile wt-status.h
2010-05-31enums: omit trailing comma for portabilityLibravatar Gary V. Vaughan1-1/+1
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX 5.1 fails to compile git. enum style is inconsistent already, with some enums declared on one line, some over 3 lines with the enum values all on the middle line, sometimes with 1 enum value per line... and independently of that the trailing comma is sometimes present and other times absent, often mixing with/without trailing comma styles in a single file, and sometimes in consecutive enum declarations. Clearly, omitting the comma is the more portable style, and this patch changes all enum declarations to use the portable omitted dangling comma style consistently. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24decode file:// and ssh:// URLsLibravatar Jeff King1-1/+7
We generally treat these as equivalent to "/path/to/repo" and "host:path_to_repo" respectively. However, they are URLs and as such may be percent-encoded. The current code simply uses them as-is without any decoding. With this patch, we will now percent-decode any file:// or ssh:// url (or ssh+git, git+ssh, etc) at the transport layer. We continue to treat plain paths and "host:path" syntax literally. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Merge branch 'fl/askpass'Libravatar Junio C Hamano1-0/+37
* fl/askpass: git-core: Support retrieving passwords with GIT_ASKPASS git-svn: Support retrieving passwords with GIT_ASKPASS
2010-03-07Merge branch 'gb/maint-submodule-env'Libravatar Junio C Hamano1-12/+2
* gb/maint-submodule-env: is_submodule_modified(): clear environment properly submodules: ensure clean environment when operating in a submodule shell setup: clear_local_git_env() function rev-parse: --local-env-vars option Refactor list of of repo-local env vars
2010-03-04git-core: Support retrieving passwords with GIT_ASKPASSLibravatar Frank Li1-0/+37
git tries to read a password from the terminal in imap-send and when talking to a http server that requires authentication. When a GUI is driving git, however, the end user is not paying attention to the terminal (there may not even be a terminal). GUI would appear to hang forever. Fix this problem by allowing a password-retrieving command to be specified in GIT_ASKPASS Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02Merge branch 'ml/connect-refactor'Libravatar Junio C Hamano1-54/+29
* ml/connect-refactor: connect.c: move duplicated code to a new function 'get_host_and_port'
2010-02-24Refactor list of of repo-local env varsLibravatar Giuseppe Bilotta1-12/+2
Move the list of GIT_* environment variables that are local to a repository into a static list in environment.c, as it is also useful elsewhere. Also add the missing GIT_CONFIG variable to the list. Make it easy to use the list both by NULL-termination and by size; the latter (excluding the terminating NULL) is stored in the local_repo_env_size define. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17connect.c: move duplicated code to a new function 'get_host_and_port'Libravatar Michael Lukashov1-54/+29
The following functions: git_tcp_connect_sock (IPV6 version) git_tcp_connect_sock (no IPV6 version), git_proxy_connect have common block of code. Move it to a new function 'get_host_and_port' Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-03Typofixes outside documentation areaLibravatar Junio C Hamano1-1/+1
begining -> beginning canonicalizations -> canonicalization comand -> command dewrapping -> unwrapping dirtyness -> dirtiness DISCLAMER -> DISCLAIMER explicitely -> explicitly feeded -> fed impiled -> implied madatory -> mandatory mimick -> mimic preceeding -> preceding reqeuest -> request substition -> substitution Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-27Merge branch 'il/maint-colon-address'Libravatar Junio C Hamano1-2/+8
* il/maint-colon-address: Allow use of []-wrapped addresses in git:// Support addresses with ':' in git-daemon
2010-01-26Allow use of []-wrapped addresses in git://Libravatar Ilari Liusvaara1-2/+8
Allow using "["<host>"]":<port> and "["<host>"]" notations in git:// host addresses. This is needed to be able to connect to addresses that contain ':' (e.g. numeric IPv6 addresses). Also send the host header []-wrapped so it can actually be parsed by remote end. Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25git_connect: use use_shell instead of explicit "sh", "-c"Libravatar Johannes Sixt1-2/+1
This is a followup to ac0ba18 (run-command: convert simple callsites to use_shell, 2009-12-30), for consistency. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-23Merge branch 'cc/replace'Libravatar Junio C Hamano1-0/+1
* cc/replace: Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS Documentation: fix typos and spelling in replace documentation replace: use a GIT_NO_REPLACE_OBJECTS env variable
2009-11-20replace: use a GIT_NO_REPLACE_OBJECTS env variableLibravatar Christian Couder1-0/+1
This has the same effect as --no-replace-objects option; git ignores the replace refs. When --no-replace-objects option is passed to git, this environment variable is set to "1" and exported to subprocesses in order to propagate the same setting. It is useful for example for scripts, as the git commands used in them can now be aware that they must not read replace refs. Tested-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-30Move "get_ack()" back to fetch-packLibravatar Shawn O. Pearce1-21/+0
In 41cb7488 Linus moved this function to connect.c for reuse inside of the git-clone-pack command. That was 2005, but in 2006 Junio retired git-clone-pack in commit efc7fa53. Since then the only caller has been fetch-pack. Since this ACK/NAK exchange is only used by the fetch-pack/upload-pack protocol we should move it back to be a private detail of fetch-pack. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-31Style fixes, add a space after if/for/while.Libravatar Brian Gianforcaro1-1/+1
The majority of code in core git appears to use a single space after if/for/while. This is an attempt to bring more code to this standard. These are entirely cosmetic changes. Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-20Fix various sparse warnings in the git source codeLibravatar Linus Torvalds1-1/+1
There are a few remaining ones, but this fixes the trivial ones. It boils down to two main issues that sparse complains about: - warning: Using plain integer as NULL pointer Sparse doesn't like you using '0' instead of 'NULL'. For various good reasons, not the least of which is just the visual confusion. A NULL pointer is not an integer, and that whole "0 works as NULL" is a historical accident and not very pretty. A few of these remain: zlib is a total mess, and Z_NULL is just a 0. I didn't touch those. - warning: symbol 'xyz' was not declared. Should it be static? Sparse wants to see declarations for any functions you export. A lack of a declaration tends to mean that you should either add one, or you should mark the function 'static' to show that it's in file scope. A few of these remain: I only did the ones that should obviously just be made static. That 'wt_status_submodule_summary' one is debatable. It has a few related flags (like 'wt_status_use_color') which _are_ declared, and are used by builtin-commit.c. So maybe we'd like to export it at some point, but it's not declared now, and not used outside of that file, so 'static' it is in this patch. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-13Merge branch 'sp/msysgit'Libravatar Junio C Hamano1-2/+6
* sp/msysgit: compat/ has subdirectories: do not omit them in 'make clean' Fix typo in nedmalloc warning fix MinGW: Teach Makefile to detect msysgit and apply specific settings Fix warnings in nedmalloc when compiling with GCC 4.4.0 Add custom memory allocator to MinGW and MacOS builds MinGW readdir reimplementation to support d_type connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows git: browsing paths with spaces when using the start command MinGW: fix warning about implicit declaration of _getch() test-chmtime: work around Windows limitation Work around a regression in Windows 7, causing erase_in_line() to crash sometimes Quiet make: do not leave Windows behind MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore Conflicts: Makefile
2009-06-06daemon: Strictly parse the "extra arg" part of the commandLibravatar Shawn O. Pearce1-1/+4
Since 1.4.4.5 (49ba83fb67 "Add virtualization support to git-daemon") git daemon enters an infinite loop and never terminates if a client hides any extra arguments in the initial request line which is not exactly "\0host=blah\0". Since that change, a client must never insert additional extra arguments, or attempt to use any argument other than "host=", as any daemon will get stuck parsing the request line and will never complete the request. Since the client can't tell if the daemon is patched or not, it is not possible to know if additional extra args might actually be able to be safely requested. If we ever need to extend the git daemon protocol to support a new feature, we may have to do something like this to the exchange: # If both support git:// v2 # C: 000cgit://v2 S: 0010ok host user C: 0018host git.kernel.org C: 0027git-upload-pack /pub/linux-2.6.git S: ...git-upload-pack header... # If client supports git:// v2, server does not: # C: 000cgit://v2 S: <EOF> C: 003bgit-upload-pack /pub/linux-2.6.git\0host=git.kernel.org\0 S: ...git-upload-pack header... This requires the client to create two TCP connections to talk to an older git daemon, however all daemons since the introduction of daemon.c will safely reject the unknown "git://v2" command request, so the client can quite easily determine the server supports an older protocol. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-01connect.c: Support PuTTY plink and TortoisePlink as SSH on WindowsLibravatar Edward Z. Yang1-2/+6
OpenSSH uses -p to specify custom ports, while PuTTY plink and TortoisePlink use -P. Git now detects if plink is in GIT_SSH and modify its flags as necessary. We call plink with -batch, so that it will error out with an error message instead of waiting for user input. As reported in msysGit issue 96, plink wants to interact with the user asking if a host key should be accepted, but this just blocks the terminal, since plink tries to get the answer from stdin. However, stdin is already connected to Git that wants to send input to the remote command. But we do not pass -batch to TortoisePlink, because TortoisePlink uses a GUI to communicate with the user, and it does not understand -batch. Signed-off-by: Edward Z. Yang <edwardzyang@thewritingpot.com> Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-25connect: replace inet_ntop with getnameinfoLibravatar Benjamin Kramer1-11/+4
inet_ntop is not protocol independent. getnameinfo(3) is part of POSIX and is available when getaddrinfo(3) is. This code is only compiled when NO_IPV6 isn't defined. The old method was buggy anyway, not every ipv6 address was converted properly because the buffer (addr) was too small. Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-14Remove unused assignmentsLibravatar Benjamin Kramer1-1/+1
These variables were always overwritten or the assigned value was unused: builtin-diff-tree.c::cmd_diff_tree(): nr_sha1 builtin-for-each-ref.c::opt_parse_sort(): sort_tail builtin-mailinfo.c::decode_header_bq(): in builtin-shortlog.c::insert_one_record(): len connect.c::git_connect(): path imap-send.c::v_issue_imap_cmd(): n pretty.c::pp_user_info(): filler remote::parse_refspec_internal(): llen Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-10connect.c: remove a few globals by using git_config callback dataLibravatar Erik Faye-Lund1-6/+3
Since ef90d6d (Provide git_config with a callback-data parameter, 2008-05-14), git_config() takes a callback data pointer that can be used to pass extra parameters to the parsing function. The codepath to parse configuration variables related to git proxy predates this facility and used a pair of file scope static variables instead. This patch removes the need for these global variables by passing the name of the host we are trying to access as the callback data. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-05remove trailing LF in die() messagesLibravatar Alexander Potashev1-1/+1
LF at the end of format strings given to die() is redundant because die already adds one on its own. Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21connect.c: stricter port validation, silence compiler warningLibravatar René Scharfe1-2/+2
In addition to checking if the provided port is numeric, also check that the string isn't empty and that the port number is within the valid range. Incidentally, this silences a compiler warning about ignoring strtol's return value. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-02connect.c: add a way for git-daemon to pass an error back to clientLibravatar Tom Preston-Werner1-0/+3
The current behavior of git-daemon is to simply close the connection on any error condition. This leaves the client without any information as to the cause of the failed fetch/push/etc. This patch allows get_remote_heads to accept a line prefixed with "ERR" that it can display to the user in an informative fashion. Once clients can understand this ERR line, git-daemon can be made to properly report "repository not found", "permission denied", or other errors. Example S: ERR No matching repository. C: fatal: remote error: No matching repository. Signed-off-by: Tom Preston-Werner <tom@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-18make alloc_ref_from_str() the new alloc_ref()Libravatar René Scharfe1-1/+1
With all calls to alloc_ref() gone, we can remove it and then we're free to give alloc_ref_from_str() the shorter name. It's a much nicer interface, as the callers always need to have a name string when they allocate a ref anyway and don't need to calculate and pass its length+1 any more. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>