summaryrefslogtreecommitdiff
path: root/connect.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-19Merge branch 'rs/more-uses-of-skip-prefix'Libravatar Junio C Hamano1-10/+6
Code clean-up. * rs/more-uses-of-skip-prefix: pack-write: simplify index_pack_lockfile using skip_prefix() and xstrfmt() connect: simplify check_ref() using skip_prefix() and starts_with()
2014-09-02connect: simplify check_ref() using skip_prefix() and starts_with()Libravatar René Scharfe1-10/+6
Both callers of check_ref() pass in NUL-terminated strings for name. Remove the len parameter and then use skip_prefix() and starts_with() instead of memcmp() to check if it starts with certain strings. This gets rid of several magic string length constants and a strlen() call. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: introduce child_process_init()Libravatar René Scharfe1-2/+4
Add a helper function for initializing those struct child_process variables for which the macro CHILD_PROCESS_INIT can't be used. Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: introduce CHILD_PROCESS_INITLibravatar René Scharfe1-1/+1
Most struct child_process variables are cleared using memset first after declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to initialize them statically instead. That's shorter, doesn't require a function call and is slightly more readable (especially given that we already have STRBUF_INIT, ARGV_ARRAY_INIT etc.). Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-21Merge branch 'maint'Libravatar Junio C Hamano1-3/+1
* maint: use xmemdupz() to allocate copies of strings given by start and length use xcalloc() to allocate zero-initialized memory
2014-07-21use xmemdupz() to allocate copies of strings given by start and lengthLibravatar René Scharfe1-3/+1
Use xmemdupz() to allocate the memory, copy the data and make sure to NUL-terminate the result, all in one step. The resulting code is shorter, doesn't contain the constants 1 and '\0', and avoids duplicating function parameters. For blame, the last copied byte (o->file.ptr[o->file.size]) is always set to NUL by fake_working_tree_commit() or read_sha1_file(), so no information is lost by the conversion to using xmemdupz(). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-20use skip_prefix to avoid magic numbersLibravatar Jeff King1-5/+6
It's a common idiom to match a prefix and then skip past it with a magic number, like: if (starts_with(foo, "bar")) foo += 3; This is easy to get wrong, since you have to count the prefix string yourself, and there's no compiler check if the string changes. We can use skip_prefix to avoid the magic numbers here. Note that some of these conversions could be much shorter. For example: if (starts_with(arg, "--foo=")) { bar = arg + 6; continue; } could become: if (skip_prefix(arg, "--foo=", &bar)) continue; However, I have left it as: if (skip_prefix(arg, "--foo=", &v)) { bar = v; continue; } to visually match nearby cases which need to actually process the string. Like: if (skip_prefix(arg, "--foo=", &v)) { bar = atoi(v); continue; } Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-15git_connect: use argv_arrayLibravatar Jeff King1-18/+10
This avoids magic numbers when we allocate fixed-size argv arrays, and makes it more obvious that we are not overflowing. It is also the first step to fixing a memory leak. When git_connect returns a child_process struct, the argv array in the struct is dynamically allocated, but the individual strings are not (they are either owned elsewhere, or are freed). Later, in finish_connect, we free the array but leave the strings alone. This works for the child_process created by git_connect, but if we use transport_take_over, we may also end up with a child_process created by transport-helper's get_helper. In that case, the strings are freshly allocated, and we would want to free them. However, we have no idea in finish_connect which type we have. By consistently using run-command's internal argv-array, we do not have to worry about this issue at all; finish_command takes care of it for us, and we can drop our manual free entirely. Note that this actually makes the get_helper leak slightly worse; now we are leaking both the strings and the array. But when we adjust it in a future patch, that leak will go away entirely. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-25Merge branch 'nd/indent-fix-connect-c'Libravatar Junio C Hamano1-1/+1
* nd/indent-fix-connect-c: connect.c: SP after "}", not TAB
2014-03-13connect.c: SP after "}", not TABLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-17Merge branch 'nd/shallow-clone'Libravatar Junio C Hamano1-9/+13
Fetching from a shallow-cloned repository used to be forbidden, primarily because the codepaths involved were not carefully vetted and we did not bother supporting such usage. This attempts to allow object transfer out of a shallow-cloned repository in a controlled way (i.e. the receiver become a shallow repository with truncated history). * nd/shallow-clone: (31 commits) t5537: fix incorrect expectation in test case 10 shallow: remove unused code send-pack.c: mark a file-local function static git-clone.txt: remove shallow clone limitations prune: clean .git/shallow after pruning objects clone: use git protocol for cloning shallow repo locally send-pack: support pushing from a shallow clone via http receive-pack: support pushing to a shallow clone via http smart-http: support shallow fetch/clone remote-curl: pass ref SHA-1 to fetch-pack as well send-pack: support pushing to a shallow clone receive-pack: allow pushes that update .git/shallow connected.c: add new variant that runs with --shallow-file add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses receive/send-pack: support pushing from a shallow clone receive-pack: reorder some code in unpack() fetch: add --update-shallow to accept refs that update .git/shallow upload-pack: make sure deepening preserves shallow roots fetch: support fetching from a shallow repository clone: support remote shallow repository ...
2013-12-17Merge branch 'tb/clone-ssh-with-colon-for-port'Libravatar Junio C Hamano1-113/+136
Be more careful when parsing remote repository URL given in the scp-style host:path notation. * tb/clone-ssh-with-colon-for-port: git_connect(): use common return point connect.c: refactor url parsing git_connect(): refactor the port handling for ssh git fetch: support host:/~repo t5500: add test cases for diag-url git fetch-pack: add --diag-url git_connect: factor out discovery of the protocol and its parts git_connect: remove artificial limit of a remote command t5601: add tests for ssh t5601: remove clear_ssh, refactor setup_ssh_wrapper
2013-12-10connect.c: teach get_remote_heads to parse "shallow" linesLibravatar Nguyễn Thái Ngọc Duy1-1/+11
No callers pass a non-empty pointer as shallow_points at this stage. As a result, all clients still refuse to talk to shallow repository on the other end. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-10remote.h: replace struct extra_have_objects with struct sha1_arrayLibravatar Nguyễn Thái Ngọc Duy1-9/+3
The latter can do everything the former can and is used in many more places. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git_connect(): use common return pointLibravatar Torsten Bögershausen1-58/+50
Use only one return point from git_connect(), doing the free(); return conn; only at one place in the code. There may be a little confusion what the variable "host" is for. At some places it is only the host part, at other places it may include the port number, so change host into hostandport here. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09connect.c: refactor url parsingLibravatar Torsten Bögershausen1-27/+30
Make the function is_local() in transport.c public, rename it into url_is_local_not_ssh() and use it in both transport.c and connect.c Use a protocol "local" for URLs for the local file system. One note about using file:// under Windows: The (absolute) path on Unix like system typically starts with "/". When the host is empty, it can be omitted, so that a shell scriptlet url=file://$pwd will give a URL like "file:///home/user/repo". Windows does not have the same concept of a root directory located in "/". When parsing the URL allow "file://C:/user/repo" (even if RFC1738 indicates that "file:///C:/user/repo" should be used). Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git_connect(): refactor the port handling for sshLibravatar Torsten Bögershausen1-34/+13
Use get_host_and_port() even for ssh. Remove the variable port git_connect(), and simplify parse_connect_url() Use only one return point in git_connect(), doing the free() and return conn. t5601 had 2 corner test cases which now pass. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git fetch: support host:/~repoLibravatar Torsten Bögershausen1-7/+7
The documentation (in urls.txt) says that "ssh://host:/~repo", "host:/~repo" or "host:~repo" specify the repository "repo" in the home directory at "host". This has not been working for "host:/~repo". Before commit 356bec "Support [address] in URLs", the comparison "url != hostname" could be used to determine if the URL had a scheme or not: "ssh://host/host" != "host". However, after 356bec "[::1]" was converted into "::1", yielding url != hostname as well. To fix this regression, don't use "if (url != hostname)", but look at the separator instead. Rename the variable "c" into "separator" to make it easier to read. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git fetch-pack: add --diag-urlLibravatar Torsten Bögershausen1-0/+28
The main purpose is to trace the URL parser called by git_connect() in connect.c The main features of the parser can be listed as this: - parse out host and path for URLs with a scheme (git:// file:// ssh://) - parse host names embedded by [] correctly - extract the port number, if present - separate URLs like "file" (which are local) from URLs like "host:repo" which should use ssh Add the new parameter "--diag-url" to "git fetch-pack", which prints the value for protocol, host and path to stderr and exits. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git_connect: factor out discovery of the protocol and its partsLibravatar Johannes Sixt1-27/+53
git_connect has grown large due to the many different protocols syntaxes that are supported. Move the part of the function that parses the URL to connect to into a separate function for readability. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git_connect: remove artificial limit of a remote commandLibravatar Johannes Sixt1-6/+1
Since day one, function git_connect() had a limit on the command line of the command that is invoked to make a connection. 7a33bcbe converted the code that constructs the command to strbuf. This would have been the right time to remove the limit, but it did not happen. Remove it now. git_connect() uses start_command() to invoke the command; consequently, the limits of the system still apply, but are diagnosed only at execve() time. But these limits are more lenient than the 1K that git_connect() imposed. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-1/+1
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30Merge branch 'jc/upload-pack-send-symref'Libravatar Junio C Hamano1-1/+62
One long-standing flaw in the pack transfer protocol used by "git clone" was that there was no way to tell the other end which branch "HEAD" points at, and the receiving end needed to guess. A new capability has been defined in the pack protocol to convey this information so that cloning from a repository with more than one branches pointing at the same commit where the HEAD is at now reliably sets the initial branch in the resulting repository. * jc/upload-pack-send-symref: t5570: Update for clone-progress-to-stderr branch t5570: Update for symref capability clone: test the new HEAD detection logic connect: annotate refs with their symref information in get_remote_head() connect.c: make parse_feature_value() static upload-pack: send non-HEAD symbolic refs upload-pack: send symbolic ref information as capability upload-pack.c: do not pass confusing cb_data to mark_our_ref() t5505: fix "set-head --auto with ambiguous HEAD" test
2013-10-14Merge branch 'nd/clone-local-with-colon'Libravatar Jonathan Nieder1-1/+1
* nd/clone-local-with-colon: clone: tighten "local paths with colons" check a bit
2013-09-27clone: tighten "local paths with colons" check a bitLibravatar Nguyễn Thái Ngọc Duy1-1/+1
commit 6000334 (clone: allow cloning local paths with colons in them - 2013-05-04) made it possible to specify a path that has colons in it without file://, e.g. ../foo:bar/somewhere. But the check was a bit sloppy. Consider the url '[foo]:bar'. The '[]' unwrapping code will turn the string to 'foo\0:bar'. In effect this new string is the same as 'foo/:bar' in the check "path < strchrnul(host, '/')", which mistakes it for a local path (with '/' before the first ':') when it's actually not. So disable the check for '/' before ':' when the URL has been mangled by '[]' unwrapping. [jn: with tests from Jeff King] Noticed-by: Morten Stenshorne <mstensho@opera.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-17connect: annotate refs with their symref information in get_remote_head()Libravatar Junio C Hamano1-0/+60
By doing this, clients of upload-pack can now reliably tell what ref a symbolic ref points at; the updated test in t5505 used to expect failure due to the ambiguity and made sure we give diagnostics, but we no longer need to be so pessimistic. Make sure we correctly learn which branch HEAD points at from the other side instead. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17connect.c: make parse_feature_value() staticLibravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-08cache.h: move remote/connect API out of itLibravatar Junio C Hamano1-0/+1
The definition of "struct ref" in "cache.h", a header file so central to the system, always confused me. This structure is not about the local ref used by sha1-name API to name local objects. It is what refspecs are expanded into, after finding out what refs the other side has, to define what refs are updated after object transfer succeeds to what values. It belongs to "remote.h" together with "struct refspec". While we are at it, also move the types and functions related to the Git transport connection to a new header file connect.h Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02Merge branch 'nd/clone-local-with-colon'Libravatar Junio C Hamano1-2/+5
"git clone foo/bar:baz" cannot be a request to clone from a remote over git-over-ssh specified in the scp style. Detect this case and clone from a local repository at "foo/bar:baz". * nd/clone-local-with-colon: clone: allow cloning local paths with colons in them
2013-05-07clone: allow cloning local paths with colons in themLibravatar Nguyễn Thái Ngọc Duy1-2/+5
Usually "foo:bar" is interpreted as an ssh url. This patch allows to clone from such paths by putting at least one slash before the colon (i.e. /path/to/foo:bar or just ./foo:bar). file://foo:bar should also work, but local optimizations are off in that case, which may be unwanted. While at there, warn the users about --local being ignored in this case. Reported-by: William Giokas <1007380@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24teach get_remote_heads to read from a memory bufferLibravatar Jeff King1-3/+3
Now that we can read packet data from memory as easily as a descriptor, get_remote_heads can take either one as a source. This will allow further refactoring in remote-curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24pkt-line: share buffer/descriptor reading implementationLibravatar Jeff King1-1/+2
The packet_read function reads from a descriptor. The packet_get_line function is similar, but reads from an in-memory buffer, and uses a completely separate implementation. This patch teaches the generic packet_read function to accept either source, and we can do away with packet_get_line's implementation. There are two other differences to account for between the old and new functions. The first is that we used to read into a strbuf, but now read into a fixed size buffer. The only two callers are fine with that, and in fact it simplifies their code, since they can use the same static-buffer interface as the rest of the packet_read_line callers (and we provide a similar convenience wrapper for reading from a buffer rather than a descriptor). This is technically an externally-visible behavior change in that we used to accept arbitrary sized packets up to 65532 bytes, and now cap out at LARGE_PACKET_MAX, 65520. In practice this doesn't matter, as we use it only for parsing smart-http headers (of which there is exactly one defined, and it is small and fixed-size). And any extension headers would be breaking the protocol to go over LARGE_PACKET_MAX anyway. The other difference is that packet_get_line would return on error rather than dying. However, both callers of packet_get_line are actually improved by dying. The first caller does its own error checking, but we can drop that; as a result, we'll actually get more specific reporting about protocol breakage when packet_read dies internally. The only downside is that packet_read will not print the smart-http URL that failed, but that's not a big deal; anybody not debugging can already see the remote's URL already, and anybody debugging would want to run with GIT_CURL_VERBOSE anyway to see way more information. The second caller, which is just trying to skip past any extra smart-http headers (of which there are none defined, but which we allow to keep room for future expansion), did not error check at all. As a result, it would treat an error just like a flush packet. The resulting mess would generally cause an error later in get_remote_heads, but now we get error reporting much closer to the source of the problem. Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: provide a LARGE_PACKET_MAX static bufferLibravatar Jeff King1-2/+2
Most of the callers of packet_read_line just read into a static 1000-byte buffer (callers which handle arbitrary binary data already use LARGE_PACKET_MAX). This works fine in practice, because: 1. The only variable-sized data in these lines is a ref name, and refs tend to be a lot shorter than 1000 characters. 2. When sending ref lines, git-core always limits itself to 1000 byte packets. However, the only limit given in the protocol specification in Documentation/technical/protocol-common.txt is LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in pack-protocol.txt, and then only describing what we write, not as a specific limit for readers. This patch lets us bump the 1000-byte limit to LARGE_PACKET_MAX. Even though git-core will never write a packet where this makes a difference, there are two good reasons to do this: 1. Other git implementations may have followed protocol-common.txt and used a larger maximum size. We don't bump into it in practice because it would involve very long ref names. 2. We may want to increase the 1000-byte limit one day. Since packets are transferred before any capabilities, it's difficult to do this in a backwards-compatible way. But if we bump the size of buffer the readers can handle, eventually older versions of git will be obsolete enough that we can justify bumping the writers, as well. We don't have plans to do this anytime soon, but there is no reason not to start the clock ticking now. Just bumping all of the reading bufs to LARGE_PACKET_MAX would waste memory. Instead, since most readers just read into a temporary buffer anyway, let's provide a single static buffer that all callers can use. We can further wrap this detail away by having the packet_read_line wrapper just use the buffer transparently and return a pointer to the static storage. That covers most of the cases, and the remaining ones already read into their own LARGE_PACKET_MAX buffers. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: teach packet_read_line to chomp newlinesLibravatar Jeff King1-3/+2
The packets sent during ref negotiation are all terminated by newline; even though the code to chomp these newlines is short, we end up doing it in a lot of places. This patch teaches packet_read_line to auto-chomp the trailing newline; this lets us get rid of a lot of inline chomping code. As a result, some call-sites which are not reading line-oriented data (e.g., when reading chunks of packfiles alongside sideband) transition away from packet_read_line to the generic packet_read interface. This patch converts all of the existing callsites. Since the function signature of packet_read_line does not change (but its behavior does), there is a possibility of new callsites being introduced in later commits, silently introducing an incompatibility. However, since a later patch in this series will change the signature, such a commit would have to be merged directly into this commit, not to the tip of the series; we can therefore ignore the issue. This is an internal cleanup and should produce no change of behavior in the normal case. However, there is one corner case to note. Callers of packet_read_line have never been able to tell the difference between a flush packet ("0000") and an empty packet ("0004"), as both cause packet_read_line to return a length of 0. Readers treat them identically, even though Documentation/technical/protocol-common.txt says we must not; it also says that implementations should not send an empty pkt-line. By stripping out the newline before the result gets to the caller, we will now treat the newline-only packet ("0005\n") the same as an empty packet, which in turn gets treated like a flush packet. In practice this doesn't matter, as neither empty nor newline-only packets are part of git's protocols (at least not for the line-oriented bits, and readers who are not expecting line-oriented packets will be calling packet_read directly, anyway). But even if we do decide to care about the distinction later, it is orthogonal to this patch. The right place to tighten would be to stop treating empty packets as flush packets, and this change does not make doing so any harder. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: provide a generic reading function with optionsLibravatar Jeff King1-1/+2
Originally we had a single function for reading packetized data: packet_read_line. Commit 46284dd grew a more "gentle" form, packet_read, that returns an error instead of dying upon reading a truncated input stream. However, it is not clear from the names which should be called, or what the difference is. Let's instead make packet_read be a generic public interface that can take option flags, and update the single callsite that uses it. This is less code, more clear, and paves the way for introducing more options into the generic interface later. The function signature is changed, so there should be no hidden conflicts with topics in flight. While we're at it, we'll document how error conditions are handled based on the options, and rename the confusing "return_line_fail" option to "gentle_on_eof". While we are cleaning up the names, we can drop the "return_line_fail" checks in packet_read_internal entirely. They look like this: ret = safe_read(..., return_line_fail); if (return_line_fail && ret < 0) ... The check for return_line_fail is a no-op; safe_read will only ever return an error value if return_line_fail was true in the first place. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-29Merge branch 'jc/capabilities'Libravatar Junio C Hamano1-9/+36
Some capabilities were asked by fetch-pack even when upload-pack did not advertise that they are available. Fix fetch-pack not to do so. * jc/capabilities: fetch-pack: mention server version with verbose output parse_feature_request: make it easier to see feature values fetch-pack: do not ask for unadvertised capabilities do not send client agent unless server does first send-pack: fix capability-sending logic include agent identifier in capability string
2012-08-13parse_feature_request: make it easier to see feature valuesLibravatar Jeff King1-9/+36
We already take care to parse key/value capabilities like "foo=bar", but the code does not provide a good way of actually finding out what is on the right-hand side of the "=". A server using "parse_feature_request" could accomplish this with some extra parsing. You must skip past the "key" portion manually, check for "=" versus NUL or space, and then find the length by searching for the next space (or NUL). But clients can't even do that, since the "server_supports" interface does not even return the pointer. Instead, let's have our parser share more information by providing a pointer to the value and its length. The "parse_feature_value" function returns a pointer to the feature's value portion, along with the length of the value. If the feature is missing, NULL is returned. If it does not have an "=", then a zero-length value is returned. Similarly, "server_feature_value" behaves in the same way, but always checks the static server_feature_list variable. We can then implement "server_supports" in terms of "server_feature_value". We cannot implement the original "parse_feature_request" in terms of our new function, because it returned a pointer to the beginning of the feature. However, no callers actually cared about the value of the returned pointer, so we can simplify it to a boolean just as we do for "server_supports". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-04Merge branch 'hv/remote-end-hung-up'Libravatar Junio C Hamano1-1/+17
When we get disconnected while expecting a response from the remote side because authentication failed, we issued an error message "The remote side hung up unexpectedly." Give hint that it may be a permission problem in the message when we can reasonably suspect it. * hv/remote-end-hung-up: remove the impression of unexpectedness when access is denied
2012-06-19remove the impression of unexpectedness when access is deniedLibravatar Heiko Voigt1-1/+17
If a server accessed through ssh is denying access git will currently issue the message "fatal: The remote end hung up unexpectedly" as the last line. This sounds as if something really ugly just happened. Since this is a quite typical situation in which users regularly get we do not say that if it happens at the beginning when reading the remote heads. If its in the very first beginning of reading the remote heads it is very likely an authentication error or a missing repository. If it happens later during reading the remote heads we still indicate that it happened during this initial contact phase. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-13git: Wrong parsing of ssh urls with IPv6 literals ignores portLibravatar René Scharfe1-1/+1
If we encounter an address part shaped like "[HOST]:PORT", we skip the opening bracket and replace the closing one with a NUL. The variable host then points to HOST and we've cut off the PORT part. Thus, when we go looking for it using host a bit later, we can't find it. Start at end instead, which either points to the colon, if present, or is equal to host. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08server_supports(): parse feature list more carefullyLibravatar Junio C Hamano1-2/+21
We have been carefully choosing feature names used in the protocol extensions so that the vocabulary does not contain a word that is a substring of another word, so it is not a real problem, but we have recently added "quiet" feature word, which would mean we cannot later add some other word with "quiet" (e.g. "quiet-push"), which is awkward. Let's make sure that we can eventually be able to do so by teaching the clients and servers that feature words consist of non whitespace letters. This parser also allows us to later add features with parameters e.g. "feature=1.5" (parameter values need to be quoted for whitespaces, but we will worry about the detauls when we do introduce them). Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-22Merge branch 'jk/git-prompt'Libravatar Junio C Hamano1-44/+0
* jk/git-prompt: contrib: add credential helper for OS X Keychain Makefile: OS X has /dev/tty Makefile: linux has /dev/tty credential: use git_prompt instead of git_getpass prompt: use git_terminal_prompt add generic terminal prompt function refactor git_getpass into generic prompt function move git_getpass to its own source file imap-send: don't check return value of git_getpass imap-send: avoid buffer overflow Conflicts: Makefile
2011-12-19Merge branch 'ew/keepalive'Libravatar Junio C Hamano1-0/+13
* ew/keepalive: enable SO_KEEPALIVE for connected TCP sockets
2011-12-13connect.c: drop path_match functionLibravatar Jeff King1-21/+0
This function was used for comparing local and remote ref names during fetch (which makes it a candidate for "most confusingly named function of the year"). It no longer has any callers, so let's get rid of it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13drop "match" parameter from get_remote_headsLibravatar Jeff King1-3/+0
The get_remote_heads function reads the list of remote refs during git protocol session. It dates all the way back to def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04). At that time, the idea was to come up with a list of refs we were interested in, and then filter the list as we got it from the remote side. Later, 1baaae5 (Make maximal use of the remote refs, 2005-10-28) stopped filtering at the get_remote_heads layer, letting us use the non-matching refs to find common history. As a result, all callers now simply pass an empty match list (and any future callers will want to do the same). So let's drop these now-useless parameters. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-12move git_getpass to its own source fileLibravatar Jeff King1-44/+0
This is currently in connect.c, but really has nothing to do with the git protocol itself. Let's make a new source file all about prompting the user, which will make it cleaner to refactor. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05enable SO_KEEPALIVE for connected TCP socketsLibravatar Eric Wong1-0/+13
Sockets may never receive notification of some link errors, causing "git fetch" or similar processes to hang forever. Enabling keepalive messages allows hung processes to error out after a few minutes/hours depending on the keepalive settings of the system. This is a problem noticed when running non-interactive cronjobs to mirror repositories using "git fetch". Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_ref_format() to take a flags argumentLibravatar Michael Haggerty1-1/+1
Change check_ref_format() to take a flags argument that indicates what is acceptable in the reference name (analogous to "git check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This is more convenient for callers and also fixes a failure in the test suite (and likely elsewhere in the code) by enabling "onelevel" and "refspec-pattern" to be allowed independently of each other. Also rename check_ref_format() to check_refname_format() to make it obvious that it deals with refnames rather than references themselves. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-11Merge branch 'dz/connect-error-report' into maintLibravatar Junio C Hamano1-14/+11
* dz/connect-error-report: Do not log unless all connect() attempts fail
2011-08-01connect: only log if all attempts failed (ipv4)Libravatar Erik Faye-Lund1-13/+10
In 63a995b (Do not log unless all connect() attempts fail), a mechanism to only log connection errors if all attempts failed was introduced for the IPv6 code-path, but not for the IPv4 one. Introduce a matching mechanism so IPv4-users also benefit from this noise-reduction. Move the call to socket after filling in sa, to make it more apparent that errno can't change in between. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>