| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* tk/typofix-connect-unknown-proto-error:
connect: fix typo in result string of prot_name()
|
|
|
|
|
|
Replace 'unkown' with 'unknown'.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When executing user-specified programs, we generally always
want to use a shell, for flexibility and consistency. One
big exception is executing $GIT_SSH, which for historical
reasons must not use a shell.
Once upon a time the logic in git_connect looked like:
if (protocol == PROTO_SSH) {
... setup ssh ...
} else {
... setup local connection ...
conn->use_shell = 1;
}
But over time the PROTO_SSH block has grown, and the "local"
block has shrunk so that it contains only conn->use_shell;
it's easy to miss at the end of the large block. Moreover,
PROTO_SSH now also sometimes sets use_shell, when the new
GIT_SSH_COMMAND is used.
Let's just set conn->use_shell when we're setting up the "conn"
struct, and unset it (with a comment) in the historical GIT_SSH
case. This will make the flow easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we "switch" to another local repository to run the server
side of a fetch or push, we must clear the variables in
local_repo_env so that our local $GIT_DIR, etc, do not
pollute the upload-pack or receive-pack that is executing in
the "remote" repository.
We have never done so for ssh connections. For the most
part, nobody has noticed because ssh will not pass unknown
environment variables by default. However, it is not out of
the question for a user to configure ssh to pass along GIT_*
variables using SendEnv/AcceptEnv.
We can demonstrate the problem by using "git -c" on a local
command and seeing its impact on a remote repository. This
config ends up in $GIT_CONFIG_PARAMETERS. In the local case,
the config has no impact, but in the ssh transport, it does
(our test script has a fake ssh that passes through all
environment variables; this isn't normal, but does simulate
one possible setup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
|
|
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
|
|
The git_connect function has code to handle plink and tortoiseplink
specially, as they require different command line arguments from
OpenSSH (-P instead of -p for ports; tortoiseplink additionally requires
-batch). However, the match was done by checking for "plink" anywhere
in the string, which led to a GIT_SSH value containing "uplink" being
treated as an invocation of putty's plink.
Improve the check by looking for "plink" or "tortoiseplink" (or those
names suffixed with ".exe") only in the final component of the path.
This has the downside that a program such as "plink-0.63" would no
longer be recognized, but the increased robustness is likely worth it.
Add tests to cover these cases to avoid regressions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code path used in git_connect pushed the majority of the SSH
connection code into an else block, even though the if block returns.
Simplify the code by eliminating the else block, as it is unneeded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier update to the parser that disects a URL broke an
address, followed by a colon, followed by an empty string (instead
of the port number), e.g. ssh://example.com:/path/to/repo.
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
|
|
An earlier update to the parser that disects an address broke an
address, followed by a colon, followed by an empty string (instead
of the port number).
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
|
|
Ignore an extra ':' at the end of the hostname in URL's like
"ssh://example.com:/path/to/repo"
The colon is meant to separate a port number from the hostname.
If the port is empty, the colon should be ignored, see RFC 3986.
It had been working for URLs with ssh:// scheme, but was unintentionally
broken in 86ceb3, "allow ssh://user@[2001:db8::1]/repo.git"
Reported-by: Reid Woodbury Jr. <reidw@rawsound.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
|
|
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
|
|
When git_connect() is called to see how the URL is parsed for
debugging purposes with CONNECT_DIAG_URL set, the variable conn is
leaked. At this point in the codeflow, it only has its memory and
no other resource is associated with it, so it is sufficient to
clean it up by just freeing it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
|
|
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
|
|
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
|
|
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
|
|
The URL for ssh may have include a username before the hostname,
like ssh://user@host/repo.
When literal IPV6 addresses are used together with a username,
the substring "user@[::1]" must be converted into "user@::1".
Make that conversion visible for the user, and write userandhost
in the diagnostics
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ssh:// syntax was added in 2386d658 (Add first cut at "git
protocol" connect logic., 2005-07-13), it accepted
ssh://user@2001:db8::1/repo.git, which is now legacy.
Over the years the parser was improved to support [] and port numbers,
but the combination of ssh://user@[2001:db8::1]:222/repo.git did
never work.
The only only way to use a user name, a literall IPV6 address and a port
number was ssh://[user@2001:db8::1]:222/repo.git
(Thanks to Christian Taube <lists@hcf.yourweb.de> for reporting this long
standing issue)
New users would use ssh://user@[2001:db8::1]:222/repo.git,
so change the parser to handle it correctly.
Support the old legacy URLs as well, to be backwards compatible,
and avoid regressions for users which upgrade an existing installation
to a later Git version.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of magic string length constants and simply compare the strings
using strcmp(). This makes the intent of the code a bit clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we connect to a git-daemon at a given host and port, we
actually send the string "localhost:9418" to the other side,
which allows it to do virtual-hosting lookups. For testing
and debugging, we'd like to be able to send arbitrary
strings, rather than the hostname we actually connected to.
Using "insteadOf" config does not work for this purpose, as
the hostname determination happens at a very low level,
right before we feed the hostname to our lookup routines.
You could use /etc/hosts or similar to get around this, but
we cannot do that portably from our test suite.
Instead, this patch provides an environment variable that
can be used to send an arbitrary string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
|
|
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It may be impractical to install a wrapper script for GIT_SSH
when additional parameters need to be passed. Provide an alternative
way of specifying a shell command to be run, including command line
arguments, by means of the GIT_SSH_COMMAND environment variable,
which behaves like GIT_SSH but is passed to the shell.
The special circuitry to modify parameters in the case of using
PuTTY's plink/tortoiseplink is activated only when using GIT_SSH;
in the case of using GIT_SSH_COMMAND, it is deliberately left up to
the user to make any required parameters adaptation before calling
the underlying ssh implementation.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/more-uses-of-skip-prefix:
pack-write: simplify index_pack_lockfile using skip_prefix() and xstrfmt()
connect: simplify check_ref() using skip_prefix() and starts_with()
|
|
Both callers of check_ref() pass in NUL-terminated strings for name.
Remove the len parameter and then use skip_prefix() and starts_with()
instead of memcmp() to check if it starts with certain strings. This
gets rid of several magic string length constants and a strlen() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a helper function for initializing those struct child_process
variables for which the macro CHILD_PROCESS_INIT can't be used.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
use xmemdupz() to allocate copies of strings given by start and length
use xcalloc() to allocate zero-initialized memory
|
|
Use xmemdupz() to allocate the memory, copy the data and make sure to
NUL-terminate the result, all in one step. The resulting code is
shorter, doesn't contain the constants 1 and '\0', and avoids
duplicating function parameters.
For blame, the last copied byte (o->file.ptr[o->file.size]) is always
set to NUL by fake_working_tree_commit() or read_sha1_file(), so no
information is lost by the conversion to using xmemdupz().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This avoids magic numbers when we allocate fixed-size argv
arrays, and makes it more obvious that we are not
overflowing.
It is also the first step to fixing a memory leak. When
git_connect returns a child_process struct, the argv array
in the struct is dynamically allocated, but the individual
strings are not (they are either owned elsewhere, or are
freed). Later, in finish_connect, we free the array but
leave the strings alone.
This works for the child_process created by git_connect, but
if we use transport_take_over, we may also end up with a
child_process created by transport-helper's get_helper.
In that case, the strings are freshly allocated, and we
would want to free them. However, we have no idea in
finish_connect which type we have.
By consistently using run-command's internal argv-array, we
do not have to worry about this issue at all; finish_command
takes care of it for us, and we can drop our manual free
entirely.
Note that this actually makes the get_helper leak slightly
worse; now we are leaking both the strings and the array.
But when we adjust it in a future patch, that leak will go
away entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/indent-fix-connect-c:
connect.c: SP after "}", not TAB
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
|
|
Be more careful when parsing remote repository URL given in the
scp-style host:path notation.
* tb/clone-ssh-with-colon-for-port:
git_connect(): use common return point
connect.c: refactor url parsing
git_connect(): refactor the port handling for ssh
git fetch: support host:/~repo
t5500: add test cases for diag-url
git fetch-pack: add --diag-url
git_connect: factor out discovery of the protocol and its parts
git_connect: remove artificial limit of a remote command
t5601: add tests for ssh
t5601: remove clear_ssh, refactor setup_ssh_wrapper
|
|
No callers pass a non-empty pointer as shallow_points at this
stage. As a result, all clients still refuse to talk to shallow
repository on the other end.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The latter can do everything the former can and is used in many more
places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use only one return point from git_connect(), doing the
free();
return conn;
only at one place in the code.
There may be a little confusion what the variable "host" is for. At
some places it is only the host part, at other places it may include
the port number, so change host into hostandport here.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the function is_local() in transport.c public, rename it into
url_is_local_not_ssh() and use it in both transport.c and connect.c
Use a protocol "local" for URLs for the local file system.
One note about using file:// under Windows:
The (absolute) path on Unix like system typically starts with "/".
When the host is empty, it can be omitted, so that a shell scriptlet
url=file://$pwd
will give a URL like "file:///home/user/repo".
Windows does not have the same concept of a root directory located in "/".
When parsing the URL allow "file://C:/user/repo"
(even if RFC1738 indicates that "file:///C:/user/repo" should be used).
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use get_host_and_port() even for ssh.
Remove the variable port git_connect(), and simplify parse_connect_url()
Use only one return point in git_connect(), doing the free() and return conn.
t5601 had 2 corner test cases which now pass.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation (in urls.txt) says that
"ssh://host:/~repo",
"host:/~repo" or
"host:~repo"
specify the repository "repo" in the home directory at "host".
This has not been working for "host:/~repo".
Before commit 356bec "Support [address] in URLs", the comparison
"url != hostname" could be used to determine if the URL had a scheme
or not: "ssh://host/host" != "host".
However, after 356bec "[::1]" was converted into "::1", yielding
url != hostname as well. To fix this regression, don't use
"if (url != hostname)", but look at the separator instead.
Rename the variable "c" into "separator" to make it easier to read.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main purpose is to trace the URL parser called by git_connect() in
connect.c
The main features of the parser can be listed as this:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Add the new parameter "--diag-url" to "git fetch-pack", which prints
the value for protocol, host and path to stderr and exits.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_connect has grown large due to the many different protocols syntaxes
that are supported. Move the part of the function that parses the URL to
connect to into a separate function for readability.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since day one, function git_connect() had a limit on the command line of
the command that is invoked to make a connection. 7a33bcbe converted the
code that constructs the command to strbuf. This would have been the
right time to remove the limit, but it did not happen. Remove it now.
git_connect() uses start_command() to invoke the command; consequently,
the limits of the system still apply, but are diagnosed only at execve()
time. But these limits are more lenient than the 1K that git_connect()
imposed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Tobias Klauser
Jeff King
brian m. carlson
Torsten Bögershausen
Stefan Beller
René Scharfe
Michael Haggerty
Thomas Quinot
Nguyễn Thái Ngọc Duy
Johannes Sixt
Christian Couder