summaryrefslogtreecommitdiff
path: root/connect.c
AgeCommit message (Collapse)AuthorFilesLines
2013-10-30Merge branch 'jc/upload-pack-send-symref'Libravatar Junio C Hamano1-1/+62
One long-standing flaw in the pack transfer protocol used by "git clone" was that there was no way to tell the other end which branch "HEAD" points at, and the receiving end needed to guess. A new capability has been defined in the pack protocol to convey this information so that cloning from a repository with more than one branches pointing at the same commit where the HEAD is at now reliably sets the initial branch in the resulting repository. * jc/upload-pack-send-symref: t5570: Update for clone-progress-to-stderr branch t5570: Update for symref capability clone: test the new HEAD detection logic connect: annotate refs with their symref information in get_remote_head() connect.c: make parse_feature_value() static upload-pack: send non-HEAD symbolic refs upload-pack: send symbolic ref information as capability upload-pack.c: do not pass confusing cb_data to mark_our_ref() t5505: fix "set-head --auto with ambiguous HEAD" test
2013-10-14Merge branch 'nd/clone-local-with-colon'Libravatar Jonathan Nieder1-1/+1
* nd/clone-local-with-colon: clone: tighten "local paths with colons" check a bit
2013-09-27clone: tighten "local paths with colons" check a bitLibravatar Nguyễn Thái Ngọc Duy1-1/+1
commit 6000334 (clone: allow cloning local paths with colons in them - 2013-05-04) made it possible to specify a path that has colons in it without file://, e.g. ../foo:bar/somewhere. But the check was a bit sloppy. Consider the url '[foo]:bar'. The '[]' unwrapping code will turn the string to 'foo\0:bar'. In effect this new string is the same as 'foo/:bar' in the check "path < strchrnul(host, '/')", which mistakes it for a local path (with '/' before the first ':') when it's actually not. So disable the check for '/' before ':' when the URL has been mangled by '[]' unwrapping. [jn: with tests from Jeff King] Noticed-by: Morten Stenshorne <mstensho@opera.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-17connect: annotate refs with their symref information in get_remote_head()Libravatar Junio C Hamano1-0/+60
By doing this, clients of upload-pack can now reliably tell what ref a symbolic ref points at; the updated test in t5505 used to expect failure due to the ambiguity and made sure we give diagnostics, but we no longer need to be so pessimistic. Make sure we correctly learn which branch HEAD points at from the other side instead. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17connect.c: make parse_feature_value() staticLibravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-08cache.h: move remote/connect API out of itLibravatar Junio C Hamano1-0/+1
The definition of "struct ref" in "cache.h", a header file so central to the system, always confused me. This structure is not about the local ref used by sha1-name API to name local objects. It is what refspecs are expanded into, after finding out what refs the other side has, to define what refs are updated after object transfer succeeds to what values. It belongs to "remote.h" together with "struct refspec". While we are at it, also move the types and functions related to the Git transport connection to a new header file connect.h Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02Merge branch 'nd/clone-local-with-colon'Libravatar Junio C Hamano1-2/+5
"git clone foo/bar:baz" cannot be a request to clone from a remote over git-over-ssh specified in the scp style. Detect this case and clone from a local repository at "foo/bar:baz". * nd/clone-local-with-colon: clone: allow cloning local paths with colons in them
2013-05-07clone: allow cloning local paths with colons in themLibravatar Nguyễn Thái Ngọc Duy1-2/+5
Usually "foo:bar" is interpreted as an ssh url. This patch allows to clone from such paths by putting at least one slash before the colon (i.e. /path/to/foo:bar or just ./foo:bar). file://foo:bar should also work, but local optimizations are off in that case, which may be unwanted. While at there, warn the users about --local being ignored in this case. Reported-by: William Giokas <1007380@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24teach get_remote_heads to read from a memory bufferLibravatar Jeff King1-3/+3
Now that we can read packet data from memory as easily as a descriptor, get_remote_heads can take either one as a source. This will allow further refactoring in remote-curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24pkt-line: share buffer/descriptor reading implementationLibravatar Jeff King1-1/+2
The packet_read function reads from a descriptor. The packet_get_line function is similar, but reads from an in-memory buffer, and uses a completely separate implementation. This patch teaches the generic packet_read function to accept either source, and we can do away with packet_get_line's implementation. There are two other differences to account for between the old and new functions. The first is that we used to read into a strbuf, but now read into a fixed size buffer. The only two callers are fine with that, and in fact it simplifies their code, since they can use the same static-buffer interface as the rest of the packet_read_line callers (and we provide a similar convenience wrapper for reading from a buffer rather than a descriptor). This is technically an externally-visible behavior change in that we used to accept arbitrary sized packets up to 65532 bytes, and now cap out at LARGE_PACKET_MAX, 65520. In practice this doesn't matter, as we use it only for parsing smart-http headers (of which there is exactly one defined, and it is small and fixed-size). And any extension headers would be breaking the protocol to go over LARGE_PACKET_MAX anyway. The other difference is that packet_get_line would return on error rather than dying. However, both callers of packet_get_line are actually improved by dying. The first caller does its own error checking, but we can drop that; as a result, we'll actually get more specific reporting about protocol breakage when packet_read dies internally. The only downside is that packet_read will not print the smart-http URL that failed, but that's not a big deal; anybody not debugging can already see the remote's URL already, and anybody debugging would want to run with GIT_CURL_VERBOSE anyway to see way more information. The second caller, which is just trying to skip past any extra smart-http headers (of which there are none defined, but which we allow to keep room for future expansion), did not error check at all. As a result, it would treat an error just like a flush packet. The resulting mess would generally cause an error later in get_remote_heads, but now we get error reporting much closer to the source of the problem. Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: provide a LARGE_PACKET_MAX static bufferLibravatar Jeff King1-2/+2
Most of the callers of packet_read_line just read into a static 1000-byte buffer (callers which handle arbitrary binary data already use LARGE_PACKET_MAX). This works fine in practice, because: 1. The only variable-sized data in these lines is a ref name, and refs tend to be a lot shorter than 1000 characters. 2. When sending ref lines, git-core always limits itself to 1000 byte packets. However, the only limit given in the protocol specification in Documentation/technical/protocol-common.txt is LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in pack-protocol.txt, and then only describing what we write, not as a specific limit for readers. This patch lets us bump the 1000-byte limit to LARGE_PACKET_MAX. Even though git-core will never write a packet where this makes a difference, there are two good reasons to do this: 1. Other git implementations may have followed protocol-common.txt and used a larger maximum size. We don't bump into it in practice because it would involve very long ref names. 2. We may want to increase the 1000-byte limit one day. Since packets are transferred before any capabilities, it's difficult to do this in a backwards-compatible way. But if we bump the size of buffer the readers can handle, eventually older versions of git will be obsolete enough that we can justify bumping the writers, as well. We don't have plans to do this anytime soon, but there is no reason not to start the clock ticking now. Just bumping all of the reading bufs to LARGE_PACKET_MAX would waste memory. Instead, since most readers just read into a temporary buffer anyway, let's provide a single static buffer that all callers can use. We can further wrap this detail away by having the packet_read_line wrapper just use the buffer transparently and return a pointer to the static storage. That covers most of the cases, and the remaining ones already read into their own LARGE_PACKET_MAX buffers. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: teach packet_read_line to chomp newlinesLibravatar Jeff King1-3/+2
The packets sent during ref negotiation are all terminated by newline; even though the code to chomp these newlines is short, we end up doing it in a lot of places. This patch teaches packet_read_line to auto-chomp the trailing newline; this lets us get rid of a lot of inline chomping code. As a result, some call-sites which are not reading line-oriented data (e.g., when reading chunks of packfiles alongside sideband) transition away from packet_read_line to the generic packet_read interface. This patch converts all of the existing callsites. Since the function signature of packet_read_line does not change (but its behavior does), there is a possibility of new callsites being introduced in later commits, silently introducing an incompatibility. However, since a later patch in this series will change the signature, such a commit would have to be merged directly into this commit, not to the tip of the series; we can therefore ignore the issue. This is an internal cleanup and should produce no change of behavior in the normal case. However, there is one corner case to note. Callers of packet_read_line have never been able to tell the difference between a flush packet ("0000") and an empty packet ("0004"), as both cause packet_read_line to return a length of 0. Readers treat them identically, even though Documentation/technical/protocol-common.txt says we must not; it also says that implementations should not send an empty pkt-line. By stripping out the newline before the result gets to the caller, we will now treat the newline-only packet ("0005\n") the same as an empty packet, which in turn gets treated like a flush packet. In practice this doesn't matter, as neither empty nor newline-only packets are part of git's protocols (at least not for the line-oriented bits, and readers who are not expecting line-oriented packets will be calling packet_read directly, anyway). But even if we do decide to care about the distinction later, it is orthogonal to this patch. The right place to tighten would be to stop treating empty packets as flush packets, and this change does not make doing so any harder. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: provide a generic reading function with optionsLibravatar Jeff King1-1/+2
Originally we had a single function for reading packetized data: packet_read_line. Commit 46284dd grew a more "gentle" form, packet_read, that returns an error instead of dying upon reading a truncated input stream. However, it is not clear from the names which should be called, or what the difference is. Let's instead make packet_read be a generic public interface that can take option flags, and update the single callsite that uses it. This is less code, more clear, and paves the way for introducing more options into the generic interface later. The function signature is changed, so there should be no hidden conflicts with topics in flight. While we're at it, we'll document how error conditions are handled based on the options, and rename the confusing "return_line_fail" option to "gentle_on_eof". While we are cleaning up the names, we can drop the "return_line_fail" checks in packet_read_internal entirely. They look like this: ret = safe_read(..., return_line_fail); if (return_line_fail && ret < 0) ... The check for return_line_fail is a no-op; safe_read will only ever return an error value if return_line_fail was true in the first place. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-29Merge branch 'jc/capabilities'Libravatar Junio C Hamano1-9/+36
Some capabilities were asked by fetch-pack even when upload-pack did not advertise that they are available. Fix fetch-pack not to do so. * jc/capabilities: fetch-pack: mention server version with verbose output parse_feature_request: make it easier to see feature values fetch-pack: do not ask for unadvertised capabilities do not send client agent unless server does first send-pack: fix capability-sending logic include agent identifier in capability string
2012-08-13parse_feature_request: make it easier to see feature valuesLibravatar Jeff King1-9/+36
We already take care to parse key/value capabilities like "foo=bar", but the code does not provide a good way of actually finding out what is on the right-hand side of the "=". A server using "parse_feature_request" could accomplish this with some extra parsing. You must skip past the "key" portion manually, check for "=" versus NUL or space, and then find the length by searching for the next space (or NUL). But clients can't even do that, since the "server_supports" interface does not even return the pointer. Instead, let's have our parser share more information by providing a pointer to the value and its length. The "parse_feature_value" function returns a pointer to the feature's value portion, along with the length of the value. If the feature is missing, NULL is returned. If it does not have an "=", then a zero-length value is returned. Similarly, "server_feature_value" behaves in the same way, but always checks the static server_feature_list variable. We can then implement "server_supports" in terms of "server_feature_value". We cannot implement the original "parse_feature_request" in terms of our new function, because it returned a pointer to the beginning of the feature. However, no callers actually cared about the value of the returned pointer, so we can simplify it to a boolean just as we do for "server_supports". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-04Merge branch 'hv/remote-end-hung-up'Libravatar Junio C Hamano1-1/+17
When we get disconnected while expecting a response from the remote side because authentication failed, we issued an error message "The remote side hung up unexpectedly." Give hint that it may be a permission problem in the message when we can reasonably suspect it. * hv/remote-end-hung-up: remove the impression of unexpectedness when access is denied
2012-06-19remove the impression of unexpectedness when access is deniedLibravatar Heiko Voigt1-1/+17
If a server accessed through ssh is denying access git will currently issue the message "fatal: The remote end hung up unexpectedly" as the last line. This sounds as if something really ugly just happened. Since this is a quite typical situation in which users regularly get we do not say that if it happens at the beginning when reading the remote heads. If its in the very first beginning of reading the remote heads it is very likely an authentication error or a missing repository. If it happens later during reading the remote heads we still indicate that it happened during this initial contact phase. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-13git: Wrong parsing of ssh urls with IPv6 literals ignores portLibravatar René Scharfe1-1/+1
If we encounter an address part shaped like "[HOST]:PORT", we skip the opening bracket and replace the closing one with a NUL. The variable host then points to HOST and we've cut off the PORT part. Thus, when we go looking for it using host a bit later, we can't find it. Start at end instead, which either points to the colon, if present, or is equal to host. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08server_supports(): parse feature list more carefullyLibravatar Junio C Hamano1-2/+21
We have been carefully choosing feature names used in the protocol extensions so that the vocabulary does not contain a word that is a substring of another word, so it is not a real problem, but we have recently added "quiet" feature word, which would mean we cannot later add some other word with "quiet" (e.g. "quiet-push"), which is awkward. Let's make sure that we can eventually be able to do so by teaching the clients and servers that feature words consist of non whitespace letters. This parser also allows us to later add features with parameters e.g. "feature=1.5" (parameter values need to be quoted for whitespaces, but we will worry about the detauls when we do introduce them). Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-22Merge branch 'jk/git-prompt'Libravatar Junio C Hamano1-44/+0
* jk/git-prompt: contrib: add credential helper for OS X Keychain Makefile: OS X has /dev/tty Makefile: linux has /dev/tty credential: use git_prompt instead of git_getpass prompt: use git_terminal_prompt add generic terminal prompt function refactor git_getpass into generic prompt function move git_getpass to its own source file imap-send: don't check return value of git_getpass imap-send: avoid buffer overflow Conflicts: Makefile
2011-12-19Merge branch 'ew/keepalive'Libravatar Junio C Hamano1-0/+13
* ew/keepalive: enable SO_KEEPALIVE for connected TCP sockets
2011-12-13connect.c: drop path_match functionLibravatar Jeff King1-21/+0
This function was used for comparing local and remote ref names during fetch (which makes it a candidate for "most confusingly named function of the year"). It no longer has any callers, so let's get rid of it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13drop "match" parameter from get_remote_headsLibravatar Jeff King1-3/+0
The get_remote_heads function reads the list of remote refs during git protocol session. It dates all the way back to def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04). At that time, the idea was to come up with a list of refs we were interested in, and then filter the list as we got it from the remote side. Later, 1baaae5 (Make maximal use of the remote refs, 2005-10-28) stopped filtering at the get_remote_heads layer, letting us use the non-matching refs to find common history. As a result, all callers now simply pass an empty match list (and any future callers will want to do the same). So let's drop these now-useless parameters. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-12move git_getpass to its own source fileLibravatar Jeff King1-44/+0
This is currently in connect.c, but really has nothing to do with the git protocol itself. Let's make a new source file all about prompting the user, which will make it cleaner to refactor. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05enable SO_KEEPALIVE for connected TCP socketsLibravatar Eric Wong1-0/+13
Sockets may never receive notification of some link errors, causing "git fetch" or similar processes to hang forever. Enabling keepalive messages allows hung processes to error out after a few minutes/hours depending on the keepalive settings of the system. This is a problem noticed when running non-interactive cronjobs to mirror repositories using "git fetch". Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_ref_format() to take a flags argumentLibravatar Michael Haggerty1-1/+1
Change check_ref_format() to take a flags argument that indicates what is acceptable in the reference name (analogous to "git check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This is more convenient for callers and also fixes a failure in the test suite (and likely elsewhere in the code) by enabling "onelevel" and "refspec-pattern" to be allowed independently of each other. Also rename check_ref_format() to check_refname_format() to make it obvious that it deals with refnames rather than references themselves. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-11Merge branch 'dz/connect-error-report' into maintLibravatar Junio C Hamano1-14/+11
* dz/connect-error-report: Do not log unless all connect() attempts fail
2011-08-01connect: only log if all attempts failed (ipv4)Libravatar Erik Faye-Lund1-13/+10
In 63a995b (Do not log unless all connect() attempts fail), a mechanism to only log connection errors if all attempts failed was introduced for the IPv6 code-path, but not for the IPv4 one. Introduce a matching mechanism so IPv4-users also benefit from this noise-reduction. Move the call to socket after filling in sa, to make it more apparent that errno can't change in between. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-01Merge branch 'maint' into ef/ipv4-connect-error-reportLibravatar Junio C Hamano1-1/+1
* maint: connect: correctly number ipv6 network adapter
2011-08-01connect: correctly number ipv6 network adapterLibravatar Erik Faye-Lund1-1/+1
In ba50532, the variable 'cnt' was added to both the IPv6 and the IPv4 version of git_tcp_connect_sock, intended to identify which network adapter the connection failed on. But in the IPv6 version, the variable was never increased, leaving it constantly at zero. This behaviour isn't very useful, so let's fix it by increasing the variable at every loop-iteration. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-14Do not log unless all connect() attempts failLibravatar Dave Zarzycki1-14/+11
IPv6 hosts are often unreachable on the primarily IPv4 Internet and therefore we shouldn't print an error if there are still other hosts we can try to connect() to. This helps "git fetch --quiet" stay quiet. Signed-off-by: Dave Zarzycki <zarzycki@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19Merge branch 'jk/git-connection-deadlock-fix'Libravatar Junio C Hamano1-14/+21
* jk/git-connection-deadlock-fix: test core.gitproxy configuration send-pack: avoid deadlock on git:// push with failed pack-objects connect: let callers know if connection is a socket connect: treat generic proxy processes like ssh processes Conflicts: connect.c
2011-05-16connect: let callers know if connection is a socketLibravatar Jeff King1-1/+6
They might care because they want to do a half-duplex close. With pipes, that means simply closing the output descriptor; with a socket, you must actually call shutdown. Instead of exposing the magic no_fork child_process struct, let's encapsulate the test in a function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-16connect: treat generic proxy processes like ssh processesLibravatar Jeff King1-13/+15
The git_connect function returns two ends of a pipe for talking with a remote, plus a struct child_process representing the other end of the pipe. If we have a direct socket connection, then this points to a special "no_fork" child process. The code path for doing git-over-pipes or git-over-ssh sets up this child process to point to the child git command or the ssh process. When we call finish_connect eventually, we check wait() on the command and report its return value. The code path for git://, on the other hand, always sets it to no_fork. In the case of a direct TCP connection, this makes sense; we have no child process. But in the case of a proxy command (configured by core.gitproxy), we do have a child process, but we throw away its pid, and therefore ignore its return code. Instead, let's keep that information in the proxy case, and respect its return code, which can help catch some errors (though depending on your proxy command, it will be errors reported by the proxy command itself, and not propagated from git commands. Still, it is probably better to propagate such errors than to ignore them). It also means that the child_process field can reliably be used to determine whether the returned descriptors are actually a full-duplex socket, which means we should be using shutdown() instead of a simple close. Signed-off-by: Jeff King <peff@peff.net> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-30Make sure that git_getpass() never returns NULLLibravatar Johannes Schindelin1-2/+6
The result of git_getpass() is used without checking for NULL, so let's just die() instead of returning NULL. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31Allow core.askpass to override SSH_ASKPASS.Libravatar Knut Franke1-1/+2
Modify handling of the 'core.askpass' option so that it has the same effect as GIT_ASKPASS also if SSH_ASKPASS is set. Signed-off-by: Knut Franke <k.franke@science-computing.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31Add a new option 'core.askpass'.Libravatar Anselm Kruis1-1/+3
Setting this option has the same effect as setting the environment variable 'GIT_ASKPASS'. Signed-off-by: Knut Franke <k.franke@science-computing.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'gv/portable'Libravatar Junio C Hamano1-1/+1
* gv/portable: test-lib: use DIFF definition from GIT-BUILD-OPTIONS build: propagate $DIFF to scripts Makefile: Tru64 portability fix Makefile: HP-UX 10.20 portability fixes Makefile: HPUX11 portability fixes Makefile: SunOS 5.6 portability fix inline declaration does not work on AIX Allow disabling "inline" Some platforms lack socklen_t type Make NO_{INET_NTOP,INET_PTON} configured independently Makefile: some platforms do not have hstrerror anywhere git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition test_cmp: do not use "diff -u" on platforms that lack one fixup: do not unconditionally disable "diff -u" tests: use "test_cmp", not "diff", when verifying the result Do not use "diff" found on PATH while building and installing enums: omit trailing comma for portability Makefile: -lpthread may still be necessary when libc has only pthread stubs Rewrite dynamic structure initializations to runtime assignment Makefile: pass CPPFLAGS through to fllow customization Conflicts: Makefile wt-status.h
2010-05-31enums: omit trailing comma for portabilityLibravatar Gary V. Vaughan1-1/+1
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX 5.1 fails to compile git. enum style is inconsistent already, with some enums declared on one line, some over 3 lines with the enum values all on the middle line, sometimes with 1 enum value per line... and independently of that the trailing comma is sometimes present and other times absent, often mixing with/without trailing comma styles in a single file, and sometimes in consecutive enum declarations. Clearly, omitting the comma is the more portable style, and this patch changes all enum declarations to use the portable omitted dangling comma style consistently. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-24decode file:// and ssh:// URLsLibravatar Jeff King1-1/+7
We generally treat these as equivalent to "/path/to/repo" and "host:path_to_repo" respectively. However, they are URLs and as such may be percent-encoded. The current code simply uses them as-is without any decoding. With this patch, we will now percent-decode any file:// or ssh:// url (or ssh+git, git+ssh, etc) at the transport layer. We continue to treat plain paths and "host:path" syntax literally. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Merge branch 'fl/askpass'Libravatar Junio C Hamano1-0/+37
* fl/askpass: git-core: Support retrieving passwords with GIT_ASKPASS git-svn: Support retrieving passwords with GIT_ASKPASS
2010-03-07Merge branch 'gb/maint-submodule-env'Libravatar Junio C Hamano1-12/+2
* gb/maint-submodule-env: is_submodule_modified(): clear environment properly submodules: ensure clean environment when operating in a submodule shell setup: clear_local_git_env() function rev-parse: --local-env-vars option Refactor list of of repo-local env vars
2010-03-04git-core: Support retrieving passwords with GIT_ASKPASSLibravatar Frank Li1-0/+37
git tries to read a password from the terminal in imap-send and when talking to a http server that requires authentication. When a GUI is driving git, however, the end user is not paying attention to the terminal (there may not even be a terminal). GUI would appear to hang forever. Fix this problem by allowing a password-retrieving command to be specified in GIT_ASKPASS Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02Merge branch 'ml/connect-refactor'Libravatar Junio C Hamano1-54/+29
* ml/connect-refactor: connect.c: move duplicated code to a new function 'get_host_and_port'
2010-02-24Refactor list of of repo-local env varsLibravatar Giuseppe Bilotta1-12/+2
Move the list of GIT_* environment variables that are local to a repository into a static list in environment.c, as it is also useful elsewhere. Also add the missing GIT_CONFIG variable to the list. Make it easy to use the list both by NULL-termination and by size; the latter (excluding the terminating NULL) is stored in the local_repo_env_size define. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17connect.c: move duplicated code to a new function 'get_host_and_port'Libravatar Michael Lukashov1-54/+29
The following functions: git_tcp_connect_sock (IPV6 version) git_tcp_connect_sock (no IPV6 version), git_proxy_connect have common block of code. Move it to a new function 'get_host_and_port' Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-03Typofixes outside documentation areaLibravatar Junio C Hamano1-1/+1
begining -> beginning canonicalizations -> canonicalization comand -> command dewrapping -> unwrapping dirtyness -> dirtiness DISCLAMER -> DISCLAIMER explicitely -> explicitly feeded -> fed impiled -> implied madatory -> mandatory mimick -> mimic preceeding -> preceding reqeuest -> request substition -> substitution Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-27Merge branch 'il/maint-colon-address'Libravatar Junio C Hamano1-2/+8
* il/maint-colon-address: Allow use of []-wrapped addresses in git:// Support addresses with ':' in git-daemon
2010-01-26Allow use of []-wrapped addresses in git://Libravatar Ilari Liusvaara1-2/+8
Allow using "["<host>"]":<port> and "["<host>"]" notations in git:// host addresses. This is needed to be able to connect to addresses that contain ':' (e.g. numeric IPv6 addresses). Also send the host header []-wrapped so it can actually be parsed by remote end. Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25git_connect: use use_shell instead of explicit "sh", "-c"Libravatar Johannes Sixt1-2/+1
This is a followup to ac0ba18 (run-command: convert simple callsites to use_shell, 2009-12-30), for consistency. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>