| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Compiling with gcc-10, -O2, and -fsanitize=undefined results in a
compiler warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
3170 | output[0] = '\t';
| ~~~~~~~~~~^~~~~~
config.c:3076:7: note: at offset -1 to object ‘buf’ with size 1024 declared here
3076 | char buf[1024];
| ^~~
This is a false positive. The interesting lines of code are:
int i;
char *output = buf;
...
for (i = 0; buf[i] && isspace(buf[i]); i++)
; /* do nothing */
...
int offset;
offset = section_name_match(&buf[i], old_name);
if (offset > 0) {
...
output += offset + i;
if (strlen(output) > 0) {
/*
* More content means there's
* a declaration to put on the
* next line; indent with a
* tab
*/
output -= 1;
output[0] = '\t';
}
}
So we do assign output to buf initially. Later we increment it based on
"offset" and "i" and then subtract "1" from it. That latter step is what
the compiler is complaining about; it could lead to going off the left
side of the array if "output == buf" at the moment of the subtraction.
For that to be the case, then "offset + i" would have to be 0. But that
can't happen:
- we know that "offset" is at least 1, since we're in a conditional
block that checks that
- we know that "i" is not negative, since it started at 0 and only
incremented over whitespace
So the sum must be at least 1, and therefore it's OK to subtract one
from "output".
But that's not quite the whole story. Since "i" is an int, it could in
theory be possible to overflow to negative (when counting whitespace on
a very large string). But we know that's impossible because we're
counting the 1024-byte buffer we just fed to fgets(), so it can never be
larger than that.
Switching the type of "i" to "unsigned" makes the warning go away, so
let's do that.
Arguably size_t is an even better type (for this and for the other
length fields), but switching to it produces a similar but distinct
warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:13: error: array subscript -1 is outside array bounds of ‘char[1024]’ [-Werror=array-bounds]
3170 | output[0] = '\t';
| ~~~~~~^~~
config.c:3076:7: note: while referencing ‘buf’
3076 | char buf[1024];
| ^~~
If we were to ever switch off of fgets() to strbuf_getline() or similar,
we'd probably need to use size_t to avoid other overflow problems. But
for now we know we're safe because of the small fixed size of our
buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the last few commits have made it possible for the config parser
to handle config files up to the limits of size_t, the rest of the code
isn't really ready for this. In particular, we often feed the keys as
strings into printf "%s" format specifiers. And because the printf
family of functions must return an int to specify the result, they
complain. Here are two concrete examples (using glibc; we're in
uncharted territory here so results may vary):
Generate a gigantic .gitmodules file like this:
git submodule add /some/other/repo foo
{
printf '[submodule "'
perl -e 'print "a" x 2**31'
echo '"]path = foo'
} >.gitmodules
git commit -m 'huge gitmodule'
then try this:
$ git show
BUG: strbuf.c:397: your vsnprintf is broken (returned -1)
The problem is that we end up calling:
strbuf_addf(&sb, "submodule.%s.ignore", submodule_name);
which relies on vsnprintf(), and that function has no way to report back
a size larger than INT_MAX.
Taking that same file, try this:
git config --file=.gitmodules --list --name-only
On my system it produces an output with exactly 4GB of spaces. I
confirmed in a debugger that we reach the config callback with the key
intact: it's 2147483663 bytes and full of a's. But when we print it with
this call:
printf("%s%c", key_, term);
we just get the spaces.
So given the fact that these are insane cases which we have no need to
support, the weird behavior from feeding the results to printf even if
the code is careful, and the possibility of uncareful code introducing
its own integer truncation issues, let's just declare INT_MAX as a limit
for parsing config files.
We'll enforce the limit in get_next_char(), which generalizes over all
sources (blobs, files, etc) and covers any element we're parsing
(whether section, key, value, etc). For simplicity, the limit is over
the length of the _whole_ file, so you couldn't have two 1GB values in
the same file. This should be perfectly fine, as the expected size for
config files is generally kilobytes at most.
With this patch both cases above will yield:
fatal: bad config line 1 in file .gitmodules
That's not an amazing error message, but the parser isn't set up to
provide specific messages (it just breaks out of the parsing loop and
gives that generic error even if see a syntactic issue). And we really
wouldn't expect to see this case outside of somebody maliciously probing
the limits of the config system.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the config parsing infrastructure is limited in what it can
parse only by the size of memory, because it parses character by
character, building up strbufs for keys, values, etc. One exception is
the "baselen" value we keep in git_parse_source(), which is an int.
That stores the length of the section.subsection base, to which we can
then append individual key names (by truncating back to the baselen with
strbuf_setlen(), and then appending characters for the key name). But
because it's an int, if we see an absurdly long section or subsection,
we may overflow the integer, wrapping negative. That negative value is
then implicitly cast to a size_t when we pass it to strbuf_setlen(),
creating a very large value and triggering a BUG. For example:
$ {
printf '[foo "'
perl -e 'print "a" x 2**31'
echo '"]bar = value'
} >huge
$ git config --file=huge --list
fatal: BUG: strbuf_setlen() beyond buffer
While this is obviously a silly case that we don't care about
supporting, it's worth fixing it by switching to a size_t for a few
reasons:
- we should try to avoid hitting BUG assertions at all
- avoiding integer truncation or overflow sets a good example and
makes it easier to audit the code for more important issues
- the BUG outcome is what happens in _this_ instance, because we wrap
negative. If we used a 2**32 subsection, we'd wrap to a small
positive value and actually generate wrong output (the subsection of
our key would be truncated).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with the recent change to parse_config_key(), the best type to return
a string length is a size_t, as it won't cause integer truncation for a
gigantic key. And as with that change, this is mostly a clarity /
hygiene issue for now, as our config parser would choke on such a large
key anyway.
There are a few ripple effects within the config code, as callers switch
to using size_t. I also adjusted a few related variables that iterate
over strings. The most unexpected change is that a call to strbuf_addf()
had to switch to strbuf_add(). We can't use a size_t with "%.*s",
because printf precisions must have type "int" (we could cast, of
course, but that would miss the point of using size_t in the first
place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We compute the length of a subset of a string, but then use that length
only to feed a "%.*s" printf placeholder for the same string. We can
just use "%s" to achieve the same thing.
The variable became useless in cb891a5989 (Use a strbuf for building up
section header and key/value pair strings., 2007-12-14), which swapped
out a write() which _did_ use the length for a strbuf_addf() call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We return the length to a subset of a string using an "int *"
out-parameter. This is fine most of the time, as we'd expect config keys
to be relatively short, but it could behave oddly if we had a gigantic
config key. A more appropriate type is size_t.
Let's switch over, which lets our callers use size_t as appropriate
(they are bound by our type because they must pass the out-parameter as
a pointer). This is mostly just a cleanup to make it clear this code
handles long strings correctly. In practice, our config parser already
chokes on long key names (because of a similar int/size_t mixup!).
When doing an int/size_t conversion, we have to be careful that nobody
was trying to assign a negative value to the variable. I manually
confirmed that for each case here. They tend to just feed the result to
xmemdupz() or similar; in a few cases I adjusted the parameter types for
helper functions to make sure the size_t is preserved.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
|
|
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
|
|
Users are nowadays trained to see message from CLI tools in the form
<file>:<lno>: …
To be able to give such messages when notifying the user about
configurations in any config file, it is currently only possible to get
the file name (if the value originates from a file to begin with) via
`current_config_name()`. Now it is also possible to query the current line
number for the configuration.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the changes to teach git_config_source to remember scope
information submodule-config.c never needed to consider the question of
config scope. Even though zeroing out git_config_source is still
correct and preserved the previous behavior of setting the scope to
CONFIG_SCOPE_UNKNOWN, it's better to be explicit about such situations
by explicitly setting the scope. As none of the current config_scope
enumerations make sense we create CONFIG_SCOPE_SUBMODULE to describe the
situation.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many situations where the scope of a config command is known
beforehand, such as passing of '--local', '--file', etc. to an
invocation of git config. However, this information is lost when moving
from builtin/config.c to /config.c. This historically hasn't been a big
deal, but to prepare for the upcoming --show-scope option we teach
git_config_source to keep track of the source and the config machinery
to use that information to set current_parsing_scope appropriately.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
do_git_config_sequence operated under the assumption that it was correct
to set current_parsing_scope to CONFIG_SCOPE_UNKNOWN as part of the
cleanup it does after it finishes execution. This is incorrect, as it
blows away the current_parsing_scope if do_git_config_sequence is called
recursively. As such situations are rare (git config running with the
'--blob' option is one example) this has yet to cause a problem, but the
upcoming '--show-scope' option will experience issues in that case, lets
teach do_git_config_sequence to preserve the current_parsing_scope from
before it started execution.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CONFIG_SCOPE_CMDLINE is generally used in the code to refer to config
values passed in via the -c option. Options passed in using this
mechanism share similar scoping characteristics with the --file and
--blob options of the 'config' command, namely that they are only in use
for that single invocation of git, and that they supersede the normal
system/global/local hierarchy. This patch introduces
CONFIG_SCOPE_COMMAND to reflect this new idea, which also makes
CONFIG_SCOPE_CMDLINE redundant.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously when iterating through git config variables, worktree config
and local config were both considered "CONFIG_SCOPE_REPO". This was
never a problem before as no one had needed to differentiate between the
two cases, but future functionality may care whether or not the config
options come from a worktree or from the repository's actual local
config file. For example, the planned feature to add a '--show-scope'
to config to allow a user to see which scope listed config options come
from would confuse users if it just printed 'repo' rather than 'local'
or 'worktree' as the documentation would lead them to expect. As well
as the additional benefit of making the implementation look more like
how the documentation describes the interface.
To accomplish this we split out what was previously considered repo
scope to be local and worktree.
The clients of 'current_config_scope()' who cared about
CONFIG_SCOPE_REPO are also modified to similarly care about
CONFIG_SCOPE_WORKTREE and CONFIG_SCOPE_LOCAL to preserve previous behavior.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prepare for the upcoming --show-scope option, we require the ability
to convert a config_scope enum to a string. As this was originally
implemented as a static function 'scope_name()' in
t/helper/test-config.c, we expose it via config.h and give it a less
ambiguous name 'config_scope_name()'
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
|
|
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
|
|
Switch one use of a hard-coded 40 constant to use the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core.untrackedCache config setting is slightly complicated,
so clarify its use and centralize its parsing into the repo
settings.
The default value is "keep" (returned as -1), which persists the
untracked cache if it exists.
If the value is set as "false" (returned as 0), then remove the
untracked cache if it exists.
If the value is set as "true" (returned as 1), then write the
untracked cache and persist it.
Instead of relying on magic values of -1, 0, and 1, split these
options into an enum. This allows the use of "-1" as a
default value. After parsing the config options, if the value is
unset we can initialize it to UNTRACKED_CACHE_KEEP.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the previous commit, our invariant that the_repository is never
NULL is restored, and we can stop being defensive in include_by_branch().
We can confirm the fix by showing that an onbranch config include will
not cause a segfault when run outside a git repository. I've put this in
t1309-early-config since it's related to the case added by 85fe0e800c
(config: work around bug with includeif:onbranch and early config,
2019-07-31), though technically the issue was with
read_very_early_config() and not read_early_config().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07b2c0eacac (config: learn the "onbranch:" includeIf condition,
2019-06-05), there is a potential catch-22 in the early config path: if
the `include.onbranch:` feature is used, Git assumes that the Git
directory has been initialized already. However, in the early config
code path that is not true.
One way to trigger this is to call the following commands in any
repository:
git config includeif.onbranch:refs/heads/master.path broken
git help -a
The symptom triggered by the `git help -a` invocation reads like this:
BUG: refs.c:1851: attempting to get main_ref_store outside of repository
Let's work around this, simply by ignoring the `includeif.onbranch:`
setting when parsing the config when the ref store has not been
initialized (yet).
Technically, there is a way to solve this properly: teach the refs
machinery to initialize the ref_store from a given gitdir/commondir pair
(which we _do_ have in the early config code path), and then use that in
`include_by_branch()`. This, however, is a pretty involved project, and
we're already in the feature freeze for Git v2.23.0.
Note: when calling above-mentioned two commands _outside_ of any Git
worktree (passing the `--global` flag to `git config`, as there is
obviously no repository config available), at the point when
`include_by_branch()` is called, `the_repository` is `NULL`, therefore
we have to be extra careful not to dereference it in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
|
|
The code to parse scaled numbers out of configuration files has
been made more robust and also easier to follow.
* rs/config-unit-parsing:
config: simplify parsing of unit factors
config: don't multiply in parse_unit_factor()
config: use unsigned_mult_overflows to check for overflows
|
|
Code clean-up for new compilers.
* js/gcc-8-and-9:
config: avoid calling `labs()` on too-large data type
winansi: simplify loading the GetCurrentConsoleFontEx() function
kwset: allow building with GCC 8
poll (mingw): allow compiling with GCC 8 and DEVELOPER=1
|
|
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just return the value of the factor or zero for unrecognized strings
instead of using an output reference and a separate return value to
indicate success. This is shorter and simpler.
It basically reverts that function to before c8deb5a146 ("Improve error
messages when int/long cannot be parsed from config", 2007-12-25), while
keeping the better messages, so restore its old name, get_unit_factor(),
as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_unit_factor() multiplies the number that is passed to it with the
value of a recognized unit factor (K, M or G for 2^10, 2^20 and 2^30,
respectively). All callers pass in 1 as a number, though, which allows
them to check the actual multiplication for overflow before they are
doing it themselves.
Ignore the passed in number and don't multiply, as this feature of
parse_unit_factor() is not used anymore. Rename the output parameter to
reflect that it's not about the end result anymore, but just about the
unit factor.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_unit_factor() checks if a K, M or G is present after a number and
multiplies it by 2^10, 2^20 or 2^30, respectively. One of its callers
checks if the result is smaller than the number alone to detect
overflows. The other one passes 1 as the number and does multiplication
and overflow check itself in a similar manner.
This works, but is inconsistent, and it would break if we added support
for a bigger unit factor. E.g. 16777217T is 2^64 + 2^40, i.e. too big
for a 64-bit number. Modulo 2^64 we get 2^40 == 1TB, which is bigger
than the raw number 16777217 == 2^24 + 1, so the overflow would go
undetected by that method.
Let both callers pass 1 and handle overflow check and multiplication
themselves. Do the check before the multiplication, using
unsigned_mult_overflows, which is simpler and can deal with larger unit
factors.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GIT_TEST_GETTEXT_POISON variable from being "non-empty?" to
being a more standard boolean variable.
Since it needed to be checked in both C code and shellscript (via test
-n) it was one of the remaining shellscript-like variables. Now that
we have "env--helper" we can change that.
There's a couple of tricky edge cases that arise because we're using
git_env_bool() early, and the config-reading "env--helper".
If GIT_TEST_GETTEXT_POISON is set to an invalid value die_bad_number()
will die, but to do so it would usually call gettext(). Let's detect
the special case of GIT_TEST_GETTEXT_POISON and always emit that
message in the C locale, lest we infinitely loop.
As seen in the updated tests in t0017-env-helper.sh there's also a
caveat related to "env--helper" needing to read the config for trace2
purposes.
Since the C_LOCALE_OUTPUT prerequisite is lazy and relies on
"env--helper" we could get invalid results if we failed to read the
config (e.g. because we'd loop on includes) when combined with
e.g. "test_i18ngrep" wanting to check with "env--helper" if
GIT_TEST_GETTEXT_POISON was true or not.
I'm crossing my fingers and hoping that a test similar to the one I
removed in the earlier "config tests: simplify include cycle test"
change in this series won't happen again, and testing for this
explicitly in "env--helper"'s own tests.
This change breaks existing uses of
e.g. GIT_TEST_GETTEXT_POISON=YesPlease, which we've documented in
po/README and other places. As noted in [1] we might want to consider
also accepting "YesPlease" in "env--helper" as a special-case.
But as the lack of uproar over 6cdccfce1e ("i18n: make GETTEXT_POISON
a runtime option", 2018-11-08) demonstrates the audience for this
option is a really narrow set of git developers, who shouldn't have
much trouble modifying their test scripts, so I think it's better to
deal with that minor headache now and make all the relevant GIT_TEST_*
variables boolean in the same way than carry the "YesPlease"
special-case forward.
1. https://public-inbox.org/git/xmqqtvckm3h8.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare die_bad_number() for a change to specially handle
GIT_TEST_GETTEXT_POISON calling git_env_bool() by making
die_bad_number() not call gettext() early, which would in turn call
git_env_bool().
There's no meaningful change here yet, just a re-arrangement of the
current code to make that subsequent change easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `labs()` function operates, as the initial `l` suggests, on `long`
parameters. However, in `config.c` we tried to use it on values of type
`intmax_t`.
This problem was found by GCC v9.x.
To fix it, let's just "unroll" the function (i.e. negate the value if it
is negative).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, if a user wishes to have individual settings per branch, they
are required to manually keep track of the settings in their head and
manually set the options on the command-line or change the config at
each branch.
Teach config the "onbranch:" includeIf condition so that it can
conditionally include configuration files if the branch that is checked
out in the current worktree matches the pattern given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
|
|
Teach do_git_config_sequence() to optionally gently check for access to
the system config. Use this option in read_very_early_config() when
initializing trace2.
In [1] SZEDER Gábor reported that my changes in [2] introduced a
regression when the user does not have permission to read the system
config.
This commit addresses that problem by optionally ignoring that error.
[1] https://public-inbox.org/git/285beb2b2d740ce20fdd8af1becf371ab39703db.1554995916.git.gitgitgadget@gmail.com/T/#m342e839289aec515523a98b5e34d7f42d3f1fd79
[2] https://public-inbox.org/git/285beb2b2d740ce20fdd8af1becf371ab39703db.1554995916.git.gitgitgadget@gmail.com/T/#m11b59c9228c698442f750ee8f9b10c629399ae48
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A buglet in configuration parser has been fixed.
* nd/include-if-wildmatch:
config: correct '**' matching in includeIf patterns
|
|
Created an even lighter version of read_early_config() that
only looks at system and global config settings. It omits
repo-local, worktree-local, and command-line settings.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Initialize opts structure in repo_read_config().
This change fixes a crash in later commit after a new field is added
to the structure.
In commit 3b256228a66f8587661481ef3e08259864f3ba2a, repo_read_config()
was added. It only initializes 3 fields in the opts structure. It is
passed to config_with_options() and then to do_git_config_sequence().
However, do_git_config_sequence() drops the opts on the floor and calls
git_config_from_file() rather than git_config_from_file_with_options(),
so that may be why this hasn't been a problem in the past.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Bert Wesarg
Matthew Rogers
René Scharfe
Derrick Stolee
Eric Wong
brian m. carlson
Johannes Schindelin
Christian Couder
Ævar Arnfjörð Bjarmason
Denton Liu
Jeff Hostetler