Age | Commit message (Collapse) | Author | Files | Lines |
|
mailmap.file configuration names a pathname, hence should honor
~/path and ~user/path as its value.
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
|
|
Like calloc(3), xcalloc() takes nmemb and then size.
* bg/xcalloc-nmemb-then-size:
transport-helper.c: rearrange xcalloc arguments
remote.c: rearrange xcalloc arguments
reflog-walk.c: rearrange xcalloc arguments
pack-revindex.c: rearrange xcalloc arguments
notes.c: rearrange xcalloc arguments
imap-send.c: rearrange xcalloc arguments
http-push.c: rearrange xcalloc arguments
diff.c: rearrange xcalloc arguments
config.c: rearrange xcalloc arguments
commit.c: rearrange xcalloc arguments
builtin/remote.c: rearrange xcalloc arguments
builtin/ls-remote.c: rearrange xcalloc arguments
|
|
* jk/strbuf-tolower:
strbuf: add strbuf_tolower function
|
|
* nd/status-auto-comment-char:
commit: allow core.commentChar=auto for character auto selection
config: be strict on core.commentChar
|
|
* ew/config-protect-mode:
config: preserve config file permissions on edits
|
|
xcalloc() takes two arguments: the number of elements and their size.
config.c includes several calls to xcalloc() that pass the arguments
in reverse order: the size of a struct lock_file*, followed by the
number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config_string() does not handle '~' and '~user' as part of the
value. Using git_config_pathname() fixes this.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a convenience wrapper to call tolower on each
character of the string.
This makes config's lowercase() function obsolete, though
note that because we have a strbuf, we are careful to
operate over the whole strbuf, rather than assuming that a
NUL is the end-of-string.
We could continue to offer a pure-string lowercase, but
there would be no callers (in most pure-string cases, we
actually duplicate and lowercase the duplicate, for which we
have the xstrdup_tolower wrapper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.commentChar is "auto", the comment char starts with '#' as
in default but if it's already in the prepared message, find another
char in a small subset. This should stop surprises because git strips
some lines unexpectedly.
Note that git is not smart enough to recognize '#' as the comment char
in custom templates and convert it if the final comment char is
different. It thinks '#' lines in custom templates as part of the
commit message. So don't use this with custom templates.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't support comment _strings_ (at least not yet). And multi-byte
character encoding could also be misinterpreted.
The test with two commas is updated because it violates this. It's
added with the patch that introduces core.commentChar in eff80a9
(Allow custom "comment char" - 2013-01-16). It's not clear to me _why_
that behavior is wanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users may already store sensitive data such as imap.pass in
.git/config; making the file world-readable when "git config"
is called to edit means their password would be compromised
on a shared system.
[v2: updated for section renames, as noted by Junio]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Squelch a false compiler warning from older gcc.
* jk/config-die-bad-number-noreturn:
config.c: mark die_bad_number as NORETURN
|
|
This can help avoid -Wuninitialized false positives in
git_config_int and git_config_ulong, as the compiler now
knows that we do not return "ret" if we hit the error
codepath.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a boolean,
but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
|
|
"git config" learned to read from the standard input when "-" is
given as the value to its "--file" parameter (attempting an
operation to update the configuration in the standard input of
course is rejected).
* ks/config-file-stdin:
config: teach "git config --file -" to read from the standard input
config: change git_config_with_options() interface
builtin/config.c: rename check_blob_write() -> check_write()
config: disallow relative include paths from blobs
|
|
"core.statinfo" configuration variable, which was a never-advertised
synonym to "core.checkstat", has been removed.
|
|
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a
boolean, but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
|
|
The patch extends git config --file interface to allow read config from
stdin.
Editing stdin or setting value in stdin is an error.
Include by absolute path is allowed in stdin config, but not by relative
path.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're going to have more options for config source.
Let's alter git_config_with_options() interface to accept struct with
all source options.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we see a relative config include like:
[include]
path = foo
we make it relative to the containing directory of the file
that contains the snippet. This makes no sense for config
read from a blob, as it is not on the filesystem. Something
like "HEAD:some/path" could have a relative path within the
tree, but:
1. It would not be part of include.path, which explicitly
refers to the filesystem.
2. It would need different parsing rules anyway to
determine that it is a tree path.
The current code just uses the "name" field, which is wrong.
Let's split that into "name" and "path" fields, use the
latter for relative includes, and fill in only the former
for blobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we see config like:
[include]
path
the expand_user_path helper notices that the config value is
empty, but we then dereference NULL while printing the error
message (glibc will helpfully print "(null)" for us here,
but we cannot rely on that).
$ git -c include.path rev-parse
error: Could not expand include path '(null)'
fatal: unable to parse command-line config
Instead of tweaking our message, let's actually use
config_error_nonbool to match other config variables that
expect a value:
$ git -c include.path rev-parse
error: Missing value for 'include.path'
fatal: unable to parse command-line config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
* tr/config-multivalue-lift-max:
config: arbitrary number of matches for --unset and --replace-all
|
|
git-config used a static match array to hold the matches we want to
unset/replace when using --unset or --replace-all. Use a
variable-sized array instead.
This in particular fixes the symptoms git-svn had when storing large
numbers of svn-remote.*.added-placeholder entries in the config file.
While the tests are rather more paranoid than just --unset and
--replace-all, the other operations already worked. Indeed git-svn's
usage only breaks the first time *after* creating so many entries,
when it wants to unset and re-add them all.
Reported-by: Jess Hottenstein <jess.hottenstein@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7192777 refactors git_parse_ulong, which is public, into a more
generic function. But since we kept the git_parse_ulong wrapper, only
that part needs to be public; nobody outside the file calls the
lower-level git_parse_unsigned.
Noticed with sparse. ("'git_parse_unsigned' was not declared. Should
it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
|
|
When you run "git config --int", the maximum size of integer
you get depends on how git was compiled, and what it
considers to be an "int".
This is almost useful, because your scripts calling "git
config" will behave similarly to git internally. But relying
on this is dubious; you have to actually know how git treats
each value internally (e.g., int versus unsigned long),
which is not documented and is subject to change. And even
if you know it is "unsigned long", we do not have a
git-config option to match that behavior.
Furthermore, you may simply be asking git to store a value
on your behalf (e.g., configuration for a hook). In that
case, the relevant range check has nothing at all to do with
git, but rather with whatever scripting tools you are using
(and git has no way of knowing what the appropriate range is
there).
Not only is the range check useless, but it is actively
harmful, as there is no way at all for scripts to look
at config variables with large values. For instance, one
cannot reliably get the value of pack.packSizeLimit via
git-config. On an LP64 system, git happily uses a 64-bit
"unsigned long" internally to represent the value, but the
script cannot read any value over 2G.
Ideally, the "--int" option would simply represent an
arbitrarily large integer. For practical purposes, however,
a 64-bit integer is large enough, and is much easier to
implement (and if somebody overflows it, we will still
notice the problem, and not simply return garbage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we try to parse an integer config argument and get a
number outside of the representable range, we die with the
cryptic message: "bad config value for '%s'".
We can improve two things:
1. Show the value that produced the error (e.g., bad
config value '3g' for 'foo.bar').
2. Mention the reason the value was rejected (e.g.,
"invalid unit" versus "out of range").
A few tests need to be updated with the new output, but that
should not be representative of real-world breakage, as
scripts should not be depending on the exact text of our
stderr output, which is subject to i18n anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are parsing an integer or unsigned long, we use
the strto*max functions, which properly set errno to ERANGE
if we get a large value. However, we also do further range
checks after applying our multiplication factor, but do not
set ERANGE. This means that a caller cannot tell if an error
was caused by ERANGE or if the input was simply not a valid
number.
This patch teaches git_parse_signed and git_parse_unsigned to set
ERANGE for range errors, and EINVAL for other errors, so that the
caller can reliably tell these cases apart.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we look at a config value as an integer using the
git_config_int function, we carefully range-check the value
we get and complain if it is out of our range. But the range
we compare to is that of a "long", which we then cast to an
"int" in the function's return value. This means that on
systems where "int" and "long" have different sizes (e.g.,
LP64 systems), we may pass the range check, but then return
nonsense by truncating the value as we cast it to an int.
We can solve this by converting git_parse_long into
git_parse_int, and range-checking the "int" range. Nobody
actually cared that we used a "long" internally, since the
result was truncated anyway. And the only other caller of
git_parse_long is git_config_maybe_bool, which should be
fine to just use int (though we will now forbid out-of-range
nonsense like setting "merge.ff" to "10g" to mean "true",
which is probably a good thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are parsing integers for config, we use an intmax_t
(or uintmax_t) internally, and then check against the size
of our result type at the end. We can parameterize the
maximum representable value, which will let us re-use the
parsing code for a variety of range checks.
Unfortunately, we cannot combine the signed and unsigned
parsing functions easily, as we have to rely on the signed
and unsigned C types internally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compilation fix on platforms with fgetc() and friends defined as
macros.
* hv/config-from-blob:
config: do not use C function names as struct members
|
|
Portability fix.
* hv/config-from-blob:
config: do not use C function names as struct members
|
|
According to C99, section 7.1.4:
Any function declared in a header may be additionally
implemented as a function-like macro defined in the
header.
Therefore calling our struct member function pointer "fgetc"
may run afoul of unwanted macro expansion when we call:
char c = cf->fgetc(cf);
This turned out to be a problem on uclibc, which defines
fgetc as a macro and causes compilation failure.
The standard suggests fixing this in a few ways:
1. Using extra parentheses to inhibit the function-like
macro expansion. E.g., "(cf->fgetc)(cf)". This is
undesirable as it's ugly, and each call site needs to
remember to use it (and on systems without the macro,
forgetting will compile just fine).
2. Using #undef (because a conforming implementation must
also be providing fgetc as a function). This is
undesirable because presumably the implementation was
using the macro for a performance benefit, and we are
dropping that optimization.
Instead, we can simply use non-colliding names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
|
|
If a config parsing error in a file occurs we can die and let the user
fix the issue. This is different for the buf parsing function since it
can be used to parse blobs of .gitmodules files. If a parsing error
occurs here we should proceed since otherwise a database containing such
an error in a single revision could be rendered unusable.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To simplify adding other sources we extract all functions needed for
parsing into a list of callbacks. We implement those callbacks for the
current file parsing. A new source can implement its own set of callbacks.
Instead of storing the concrete FILE pointer for parsing we store a void
pointer. A new source can use this to store its custom data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The global variable cf is set with an initialized value in all codepaths before
calling this function.
The complete call graph looks like this:
git_config_from_file
-> do_config_from
-> git_parse_file
-> get_next_char
-> get_value
-> get_next_char
-> parse_value
-> get_next_char
-> get_base_var
-> get_next_char
-> get_extended_base_var
-> get_next_char
The variable is initialized in do_config_from.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because a config callback may start parsing a new file, the
global context regarding the current config file is stored
as a stack. Currently we only need to manage that stack from
git_config_from_file. Let's factor it out to allow new
sources of config data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/traces:
git.txt: document GIT_TRACE_PACKET
core: use env variable instead of config var to turn on logging pack access
|
|
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration variable core.checkstat was advertised in the
documentation but the code expected core.statinfo instead.
For now, we accept both core.checkstat and core.statinfo, but the
latter will be removed in the longer term.
* jc/core-checkstat:
deprecate core.statinfo at Git 2.0 boundary
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c08e4d5b5cfa (Enable minimal stat checking, 2013-01-22) advertised
the configuration variable core.checkstat in the documentation and
its log message, but the code expected core.statinfo instead.
For now, add core.checkstat, and warn people who have core.statinfo
in their configuration file that we will remove it in Git 2.0.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Configuration parsing for tar.* configuration variables were
broken. Introduce a new config-keyname parser API to make the
callers much less error prone.
* jk/config-parsing-cleanup:
reflog: use parse_config_key in config callback
help: use parse_config_key for man config
submodule: simplify memory handling in config parsing
submodule: use parse_config_key when parsing config
userdiff: drop parse_driver function
convert some config callbacks to parse_config_key
archive-tar: use parse_config_key when parsing config
config: add helper function for parsing key names
|
|
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
|
|
The config callback functions get keys of the general form:
section.subsection.key
(where the subsection may be contain arbitrary data, or may
be missing). For matching keys without subsections, it is
simple enough to call "strcmp". Matching keys with
subsections is a little more complicated, and each callback
does it in an ad-hoc way, usually involving error-prone
pointer arithmetic.
Let's provide a helper that keeps the pointer arithmetic all
in one place.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|