| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
|
|
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
|
|
Config file reading order is important because each file can override
values in the previous files and this is expected behavior. Normally
we read in this order, all in do_git_config_sequence():
1. $HOME/.gitconfig
2. $GIT_DIR/config
3. config from command line
However in read_early_config() the order may be swapped a bit if
setup_git_directory() has not been called:
1. $HOME/.gitconfig
2. $GIT_DIR/config is NOT read because .git dir is not found _yet_
3. config from command line
4. $GIT_DIR/config is now READ (after discover_git_directory() call)
The reading at step 4 could override config at step 3, which is not
the expectation.
Now that we could pass the .git dir around, we could feed
discover_git_directory() back to step 2, so that it works again, and
remove step 4.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far we can only pass one flag, respect_includes, to thie function. We
need to pass some more (non-flag even), so let's make it accept a struct
instead of an integer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$GIT_DIR returned by get_git_dir() is normalized, with all symlinks
resolved (see setup_work_tree function). In order to match paths (or
patterns) against $GIT_DIR char-by-char, they have to be normalized
too. There is a note in config.txt about this, that the user need to
resolve symlinks by themselves if needed.
The problem is, we allow certain path expansion, '~/' and './', for
convenience and can't ask the user to resolve symlinks in these
expansions. Make sure the expanded paths have all symlinks resolved.
PS. The strbuf_realpath(&text, get_git_dir(), 1) is still needed because
get_git_dir() may return relative path.
Noticed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
|
|
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
|
|
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
|
|
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far, we only look whether the startup_info claims to have seen a
git_dir.
However, do_git_config_sequence() (and consequently the
git_config_with_options() call used by read_early_config() asks the
have_git_dir() function whether we have a .git/ directory, which in turn
also looks at git_dir and at the environment variable GIT_DIR. And when
this is the case, the repository config is handled already, so we do not
have to do that again explicitly.
Let's just use the same function, have_git_dir(), to determine whether we
have to handle .git/config explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pager configuration needs to be read early, possibly before
discovering any .git/ directory.
Let's not hide this function in pager.c, but make it available to other
callers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
|
|
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
|
|
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new function will be used in a following commit to know
if we want to use the split index feature or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parse_config_key() function was introduced to make it
easier to match "section.subsection.key" variables. It also
handles the simpler "section.key", and the caller is
responsible for distinguishing the two from its
out-parameters.
Most callers who _only_ want "section.key" would just use a
strcmp(var, "section.key"), since there is no parsing
required. However, they may still use parse_config_key() if
their "section" variable isn't a constant (an example of
this is in parse_hide_refs_config).
Using the parse_config_key is a bit clunky, though:
const char *subsection;
int subsection_len;
const char *key;
if (!parse_config_key(var, section, &subsection, &subsection_len, &key) &&
!subsection) {
/* matched! */
}
Instead, let's treat a NULL subsection as an indication that
the caller does not expect one. That lets us write:
const char *key;
if (!parse_config_key(var, section, NULL, NULL, &key)) {
/* matched! */
}
Existing callers should be unaffected, as passing a NULL
subsection would currently segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This saves us having to repeatedly add in "section_len" (and
also avoids walking over the first part of the string
multiple times for a strlen() and strrchr()).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parsing of one-shot assignments of configuration variables that
come from the command line historically was quite loose and allowed
anything to pass. It also downcased everything in the variable name,
even a three-level <section>.<subsection>.<variable> name in which
the <subsection> part must be treated in a case sensitive manner.
Existing git_config_parse_key() helper is used to parse the variable
name that comes from the command line, i.e. "git config VAR VAL",
and handles these details correctly. Replace the strbuf_tolower()
call in git_config_parse_parameter() with a call to it to correct
both issues. git_config_parse_key() does a bit more things that are
not necessary for the purpose of this codepath (e.g. it allocates a
separate buffer to return the canonicalized variable name because it
takes a "const char *" input), but we are not in a performance-critical
codepath here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config_parse_key() implements the validation and downcasing of
<section> and <variable> in "<section>[.<subsection>].<variable>"
configuration variable name. Move it (and helpers it uses) a bit up
so that it can be used by git_config_parse_parameter(), which is
used to check configuration settings that are given on the command
line (i.e. "git -c VAR=VAL cmd"), in a later patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
|
|
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
|
|
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
|
|
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
|
|
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
|
|
We somehow forgot to update the "default is 7" in the
documentation. Also give a way to explicitly ask the auto-scaling
by setting config.abbrev to "auto".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We could rely on atexit() to clean up everything, but let's be
explicit when we can. And it's good anyway because the function is
called the second time in the same process, we're in trouble.
This function should not affect the successful case because after
commit_lock_file() is called, rollback_lock_file() becomes no-op,
as long as it is initialized.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
teach submodules to load a '.gitmodules' file from a commit sha1. This
enables the population of the submodule_cache to be based on the state
of the '.gitmodules' file from a particular commit.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two ways to unlock a file: commit, or revert. Rename it to
commit_and_out to avoid confusion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are three codepaths that use a variable whose name is
pack_compression_level to affect how objects and deltas sent to a
packfile is compressed. Unlike zlib_compression_level that controls
the loose object compression, however, this variable was static to
each of these codepaths. Two of them read the pack.compression
configuration variable, using core.compression as the default, and
one of them also allowed overriding it from the command line.
The other codepath in bulk-checkin did not pay any attention to the
configuration.
Unify the configuration parsing to git_default_config(), where we
implement the parsing of core.loosecompression and core.compression
and make the former override the latter, by moving code to parse
pack.compression and also allow core.compression to give default to
this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we find ambiguous short sha1s, we may get a
disambiguation rule from our caller's context. But if we
don't, we fall back to treating all sha1s the same, even
though most projects will tend to refer only to commits by
their short sha1s.
This patch introduces a configuration option that lets the
user pick a different fallback (e.g., only commits). It's
possible that we may want to make this the default, but it's
a good idea to start as a config option for two reasons:
1. It lets people experiment with this and see if it's a
good idea (i.e., the "tend to" above is an assumption;
we don't really know if this will break some obscure
cases).
2. Even if we do flip the default, it gives people an
escape hatch if it causes problems (you can sometimes
override it by asking for "1234^{tree}", but not all
combinations are possible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
|
|
When git_config() runs, it looks in the system, user-wide,
and repo-level config files. It gets the latter by calling
git_pathdup(), which in turn calls get_git_dir(). If we
haven't set up the git repository yet, this may simply
return ".git", and we will look at ".git/config". This
seems like it would be helpful (presumably we haven't set up
the repository yet, so it tries to find it), but it turns
out to be a bad idea for a few reasons:
- it's not sufficient, and therefore hides bugs in a
confusing way. Config will be respected if commands are
run from the top-level of the working tree, but not from
a subdirectory.
- it's not always true that we haven't set up the
repository _yet_; we may not want to do it at all. For
instance, if you run "git init /some/path" from inside
another repository, it should not load config from the
existing repository.
- there might be a path ".git/config", but it is not the
actual repository we would find via setup_git_directory().
This may happen, e.g., if you are storing a git
repository inside another git repository, but have
munged one of the files in such a way that the
inner repository is not valid (e.g., by removing HEAD).
We have at least two bugs of the second type in git-init,
introduced by ae5f677 (lazily load core.sharedrepository,
2016-03-11). It causes init to use git_configset(), which
loads all of the config, including values from the current
repo (if any). This shows up in two ways:
1. If we happen to be in an existing repository directory,
we'll read and respect core.sharedrepository from it,
even though it should have no bearing on the new
repository. A new test in t1301 covers this.
2. Similarly, if we're in an existing repo that sets
core.logallrefupdates, that will cause init to fail to
set it in a newly created repository (because it thinks
that the user's templates already did so). A new test
in t0001 covers this.
We also need to adjust an existing test in t1302, which
gives another example of why this patch is an improvement.
That test creates an embedded repository with a bogus
core.repositoryformatversion of "99". It wants to make sure
that we actually stop at the bogus repo rather than
continuing upward to find the outer repo. So it checks that
"git config core.repositoryformatversion" returns 99. But
that only works because we blindly read ".git/config", even
though we _know_ we're in a repository whose vintage we do
not understand.
After this patch, we avoid reading config from the unknown
vintage repository at all, which is a safer choice. But we
need to tweak the test, since core.repositoryformatversion
will not return 99; it will claim that it could not find the
variable at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git_pager(), we really only care about getting the value
of core.pager. But to do so, we use the git_default_config()
callback, which loads many other values. Ordinarily it
isn't a big deal to load this config an extra time, as it
simply overwrites the values from the previous run. But it's
a bad idea here, for two reasons:
1. The pager setup may be called very early in the
program, before we have found the git repository. As a
result, we may fail to read the correct repo-level
config file. This is a problem for core.pager, too,
but we should at least try to minimize the pollution to
other configured values.
2. Because we call setup_pager() from git.c, basically
every builtin command _may_ end up reading this config
and getting an implicit git_default_config() setup.
Which doesn't sound like a terrible thing, except that
we don't do it consistently; it triggers only when
stdout is a tty. So if a command forgets to load the
default config itself (but depends on it anyway), it
may appear to work, and then mysteriously fail when the
pager is not in use.
We can improve this by loading _just_ the core.pager config
from git_pager().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduced in 473166b ("config: add 'origin_type' to config_source
struct", 2016-02-19), Git can inform the user about the origin of a
config error, but the implementation does not allow translators to
translate the keywords 'file', 'blob, 'standard input', and
'submodule-blob'. Moreover, for the second message, a reason for the
error is appended to the message, not allowing translators to translate
that reason either.
Unfold the message into several templates for each known origin_type.
That would result in better translation at the expense of code
verbosity.
Add enum config_oringin_type to ease management of the various
configuration origin types (blob, file, etc). Previously origin type
was considered from command line if cf->origin_type == NULL, i.e.,
uninitialized. Now we set origin_type to CONFIG_ORIGIN_CMDLINE in
git_config_from_parameters() and configset_add_value().
For error message in git_parse_source(), use xstrfmt() function to
prepare the message string, instead of doing something like it's done
for die_bad_number(), because intelligibility and code conciseness are
improved for that instance.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"upload-pack" allows a custom "git pack-objects" replacement when
responding to "fetch/clone" via the uploadpack.packObjectsHook.
* jk/upload-pack-hook:
upload-pack: provide a hook for running pack-objects
t1308: do not get fooled by symbolic links to the source tree
config: add a notion of "scope"
config: return configset value for current_config_ functions
config: set up config_source for command-line config
git_config_parse_parameter: refactor cleanup code
git_config_with_options: drop "found" counting
|
|
Typofix.
* pc/occurred:
config.c: fix misspelt "occurred" in an error message
refs.h: fix misspelt "occurred" in a comment
|
|
* pc/occurred:
config.c: fix misspelt "occurred" in an error message
refs.h: fix misspelt "occurred" in a comment
|
|
Signed-off-by: Peter Colberg <peter@colberg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
|
Junio C Hamano
Johannes Schindelin
Nguyễn Thái Ngọc Duy
David Turner
Christian Couder
Jeff King
Cornelius Weig
Brandon Williams
Jean-Noel Avila
Vasco Almeida
Peter Colberg