summaryrefslogtreecommitdiff
path: root/config.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-04config: work around gcc-10 -Wstringop-overflow warningLibravatar Jeff King1-1/+1
Compiling with gcc-10, -O2, and -fsanitize=undefined results in a compiler warning: config.c: In function ‘git_config_copy_or_rename_section_in_file’: config.c:3170:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=] 3170 | output[0] = '\t'; | ~~~~~~~~~~^~~~~~ config.c:3076:7: note: at offset -1 to object ‘buf’ with size 1024 declared here 3076 | char buf[1024]; | ^~~ This is a false positive. The interesting lines of code are: int i; char *output = buf; ... for (i = 0; buf[i] && isspace(buf[i]); i++) ; /* do nothing */ ... int offset; offset = section_name_match(&buf[i], old_name); if (offset > 0) { ... output += offset + i; if (strlen(output) > 0) { /* * More content means there's * a declaration to put on the * next line; indent with a * tab */ output -= 1; output[0] = '\t'; } } So we do assign output to buf initially. Later we increment it based on "offset" and "i" and then subtract "1" from it. That latter step is what the compiler is complaining about; it could lead to going off the left side of the array if "output == buf" at the moment of the subtraction. For that to be the case, then "offset + i" would have to be 0. But that can't happen: - we know that "offset" is at least 1, since we're in a conditional block that checks that - we know that "i" is not negative, since it started at 0 and only incremented over whitespace So the sum must be at least 1, and therefore it's OK to subtract one from "output". But that's not quite the whole story. Since "i" is an int, it could in theory be possible to overflow to negative (when counting whitespace on a very large string). But we know that's impossible because we're counting the 1024-byte buffer we just fed to fgets(), so it can never be larger than that. Switching the type of "i" to "unsigned" makes the warning go away, so let's do that. Arguably size_t is an even better type (for this and for the other length fields), but switching to it produces a similar but distinct warning: config.c: In function ‘git_config_copy_or_rename_section_in_file’: config.c:3170:13: error: array subscript -1 is outside array bounds of ‘char[1024]’ [-Werror=array-bounds] 3170 | output[0] = '\t'; | ~~~~~~^~~ config.c:3076:7: note: while referencing ‘buf’ 3076 | char buf[1024]; | ^~~ If we were to ever switch off of fgets() to strbuf_getline() or similar, we'd probably need to use size_t to avoid other overflow problems. But for now we know we're safe because of the small fixed size of our buffer. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-10config: reject parsing of files over INT_MAXLibravatar Jeff King1-0/+15
While the last few commits have made it possible for the config parser to handle config files up to the limits of size_t, the rest of the code isn't really ready for this. In particular, we often feed the keys as strings into printf "%s" format specifiers. And because the printf family of functions must return an int to specify the result, they complain. Here are two concrete examples (using glibc; we're in uncharted territory here so results may vary): Generate a gigantic .gitmodules file like this: git submodule add /some/other/repo foo { printf '[submodule "' perl -e 'print "a" x 2**31' echo '"]path = foo' } >.gitmodules git commit -m 'huge gitmodule' then try this: $ git show BUG: strbuf.c:397: your vsnprintf is broken (returned -1) The problem is that we end up calling: strbuf_addf(&sb, "submodule.%s.ignore", submodule_name); which relies on vsnprintf(), and that function has no way to report back a size larger than INT_MAX. Taking that same file, try this: git config --file=.gitmodules --list --name-only On my system it produces an output with exactly 4GB of spaces. I confirmed in a debugger that we reach the config callback with the key intact: it's 2147483663 bytes and full of a's. But when we print it with this call: printf("%s%c", key_, term); we just get the spaces. So given the fact that these are insane cases which we have no need to support, the weird behavior from feeding the results to printf even if the code is careful, and the possibility of uncareful code introducing its own integer truncation issues, let's just declare INT_MAX as a limit for parsing config files. We'll enforce the limit in get_next_char(), which generalizes over all sources (blobs, files, etc) and covers any element we're parsing (whether section, key, value, etc). For simplicity, the limit is over the length of the _whole_ file, so you couldn't have two 1GB values in the same file. This should be perfectly fine, as the expected size for config files is generally kilobytes at most. With this patch both cases above will yield: fatal: bad config line 1 in file .gitmodules That's not an amazing error message, but the parser isn't set up to provide specific messages (it just breaks out of the parsing loop and gives that generic error even if see a syntactic issue). And we really wouldn't expect to see this case outside of somebody maliciously probing the limits of the config system. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-10config: use size_t to store parsed variable baselenLibravatar Jeff King1-1/+1
Most of the config parsing infrastructure is limited in what it can parse only by the size of memory, because it parses character by character, building up strbufs for keys, values, etc. One exception is the "baselen" value we keep in git_parse_source(), which is an int. That stores the length of the section.subsection base, to which we can then append individual key names (by truncating back to the baselen with strbuf_setlen(), and then appending characters for the key name). But because it's an int, if we see an absurdly long section or subsection, we may overflow the integer, wrapping negative. That negative value is then implicitly cast to a size_t when we pass it to strbuf_setlen(), creating a very large value and triggering a BUG. For example: $ { printf '[foo "' perl -e 'print "a" x 2**31' echo '"]bar = value' } >huge $ git config --file=huge --list fatal: BUG: strbuf_setlen() beyond buffer While this is obviously a silly case that we don't care about supporting, it's worth fixing it by switching to a size_t for a few reasons: - we should try to avoid hitting BUG assertions at all - avoiding integer truncation or overflow sets a good example and makes it easier to audit the code for more important issues - the BUG outcome is what happens in _this_ instance, because we wrap negative. If we used a 2**32 subsection, we'd wrap to a small positive value and actually generate wrong output (the subsection of our key would be truncated). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-10git_config_parse_key(): return baselen as size_tLibravatar Jeff King1-7/+10
As with the recent change to parse_config_key(), the best type to return a string length is a size_t, as it won't cause integer truncation for a gigantic key. And as with that change, this is mostly a clarity / hygiene issue for now, as our config parser would choke on such a large key anyway. There are a few ripple effects within the config code, as callers switch to using size_t. I also adjusted a few related variables that iterate over strings. The most unexpected change is that a call to strbuf_addf() had to switch to strbuf_add(). We can't use a size_t with "%.*s", because printf precisions must have type "int" (we could cast, of course, but that would miss the point of using size_t in the first place). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-10config: drop useless length variable in write_pair()Libravatar Jeff King1-3/+1
We compute the length of a subset of a string, but then use that length only to feed a "%.*s" printf placeholder for the same string. We can just use "%s" to achieve the same thing. The variable became useless in cb891a5989 (Use a strbuf for building up section header and key/value pair strings., 2007-12-14), which swapped out a write() which _did_ use the length for a strbuf_addf() call. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-10parse_config_key(): return subsection len as size_tLibravatar Jeff King1-2/+2
We return the length to a subset of a string using an "int *" out-parameter. This is fine most of the time, as we'd expect config keys to be relatively short, but it could behave oddly if we had a gigantic config key. A more appropriate type is size_t. Let's switch over, which lets our callers use size_t as appropriate (they are bound by our type because they must pass the out-parameter as a pointer). This is mostly just a cleanup to make it clear this code handles long strings correctly. In practice, our config parser already chokes on long key names (because of a similar int/size_t mixup!). When doing an int/size_t conversion, we have to be careful that nobody was trying to assign a negative value to the variable. I manually confirmed that for each case here. They tend to just feed the result to xmemdupz() or similar; in a few cases I adjusted the parameter types for helper functions to make sure the size_t is preserved. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-25Merge branch 'bw/remote-rename-update-config'Libravatar Junio C Hamano1-0/+8
"git remote rename X Y" needs to adjust configuration variables (e.g. branch.<name>.remote) whose value used to be X to Y. branch.<name>.pushRemote is now also updated. * bw/remote-rename-update-config: remote rename/remove: gently handle remote.pushDefault config config: provide access to the current line number remote rename/remove: handle branch.<name>.pushRemote config values remote: clean-up config callback remote: clean-up by returning early to avoid one indentation pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
2020-02-17Merge branch 'mr/show-config-scope'Libravatar Junio C Hamano1-7/+28
"git config" learned to show in which "scope", in addition to in which file, each config setting comes from. * mr/show-config-scope: config: add '--show-scope' to print the scope of a config value submodule-config: add subomdule config scope config: teach git_config_source to remember its scope config: preserve scope in do_git_config_sequence config: clarify meaning of command line scoping config: split repo scope to local and worktree config: make scope_name non-static and rename it t1300: create custom config file without special characters t1300: fix over-indented HERE-DOCs config: fix typo in variable name
2020-02-10config: provide access to the current line numberLibravatar Bert Wesarg1-0/+8
Users are nowadays trained to see message from CLI tools in the form <file>:<lno>: … To be able to give such messages when notifying the user about configurations in any config file, it is currently only possible to get the file name (if the value originates from a file to begin with) via `current_config_name()`. Now it is also possible to query the current line number for the configuration. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10submodule-config: add subomdule config scopeLibravatar Matthew Rogers1-0/+2
Before the changes to teach git_config_source to remember scope information submodule-config.c never needed to consider the question of config scope. Even though zeroing out git_config_source is still correct and preserved the previous behavior of setting the scope to CONFIG_SCOPE_UNKNOWN, it's better to be explicit about such situations by explicitly setting the scope. As none of the current config_scope enumerations make sense we create CONFIG_SCOPE_SUBMODULE to describe the situation. Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10config: teach git_config_source to remember its scopeLibravatar Matthew Rogers1-0/+3
There are many situations where the scope of a config command is known beforehand, such as passing of '--local', '--file', etc. to an invocation of git config. However, this information is lost when moving from builtin/config.c to /config.c. This historically hasn't been a big deal, but to prepare for the upcoming --show-scope option we teach git_config_source to keep track of the source and the config machinery to use that information to set current_parsing_scope appropriately. Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10config: preserve scope in do_git_config_sequenceLibravatar Matthew Rogers1-1/+2
do_git_config_sequence operated under the assumption that it was correct to set current_parsing_scope to CONFIG_SCOPE_UNKNOWN as part of the cleanup it does after it finishes execution. This is incorrect, as it blows away the current_parsing_scope if do_git_config_sequence is called recursively. As such situations are rare (git config running with the '--blob' option is one example) this has yet to cause a problem, but the upcoming '--show-scope' option will experience issues in that case, lets teach do_git_config_sequence to preserve the current_parsing_scope from before it started execution. Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10config: clarify meaning of command line scopingLibravatar Matthew Rogers1-3/+3
CONFIG_SCOPE_CMDLINE is generally used in the code to refer to config values passed in via the -c option. Options passed in using this mechanism share similar scoping characteristics with the --file and --blob options of the 'config' command, namely that they are only in use for that single invocation of git, and that they supersede the normal system/global/local hierarchy. This patch introduces CONFIG_SCOPE_COMMAND to reflect this new idea, which also makes CONFIG_SCOPE_CMDLINE redundant. Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10config: split repo scope to local and worktreeLibravatar Matthew Rogers1-7/+6
Previously when iterating through git config variables, worktree config and local config were both considered "CONFIG_SCOPE_REPO". This was never a problem before as no one had needed to differentiate between the two cases, but future functionality may care whether or not the config options come from a worktree or from the repository's actual local config file. For example, the planned feature to add a '--show-scope' to config to allow a user to see which scope listed config options come from would confuse users if it just printed 'repo' rather than 'local' or 'worktree' as the documentation would lead them to expect. As well as the additional benefit of making the implementation look more like how the documentation describes the interface. To accomplish this we split out what was previously considered repo scope to be local and worktree. The clients of 'current_config_scope()' who cared about CONFIG_SCOPE_REPO are also modified to similarly care about CONFIG_SCOPE_WORKTREE and CONFIG_SCOPE_LOCAL to preserve previous behavior. Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10config: make scope_name non-static and rename itLibravatar Matthew Rogers1-0/+16
To prepare for the upcoming --show-scope option, we require the ability to convert a config_scope enum to a string. As this was originally implemented as a static function 'scope_name()' in t/helper/test-config.c, we expose it via config.h and give it a less ambiguous name 'config_scope_name()' Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10strbuf: add and use strbuf_insertstr()Libravatar René Scharfe1-1/+1
Add a function for inserting a C string into a strbuf. Use it throughout the source to get rid of magic string length constants and explicit strlen() calls. Like strbuf_addstr(), implement it as an inline function to avoid the implicit strlen() calls to cause runtime overhead. Helped-by: Taylor Blau <me@ttaylorr.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22sparse-checkout: add 'cone' modeLibravatar Derrick Stolee1-0/+5
The sparse-checkout feature can have quadratic performance as the number of patterns and number of entries in the index grow. If there are 1,000 patterns and 1,000,000 entries, this time can be very significant. Create a new Boolean config option, core.sparseCheckoutCone, to indicate that we expect the sparse-checkout file to contain a more limited set of patterns. This is a separate config setting from core.sparseCheckout to avoid breaking older clients by introducing a tri-state option. The config option does nothing right now, but will be expanded upon in a later commit. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-15Merge branch 'ew/hashmap'Libravatar Junio C Hamano1-11/+13
Code clean-up of the hashmap API, both users and implementation. * ew/hashmap: hashmap_entry: remove first member requirement from docs hashmap: remove type arg from hashmap_{get,put,remove}_entry OFFSETOF_VAR macro to simplify hashmap iterators hashmap: introduce hashmap_free_entries hashmap: hashmap_{put,remove} return hashmap_entry * hashmap: use *_entry APIs for iteration hashmap_cmp_fn takes hashmap_entry params hashmap_get{,_from_hash} return "struct hashmap_entry *" hashmap: use *_entry APIs to wrap container_of hashmap_get_next returns "struct hashmap_entry *" introduce container_of macro hashmap_put takes "struct hashmap_entry *" hashmap_remove takes "const struct hashmap_entry *" hashmap_get takes "const struct hashmap_entry *" hashmap_add takes "struct hashmap_entry *" hashmap_get_next takes "const struct hashmap_entry *" hashmap_entry_init takes "struct hashmap_entry *" packfile: use hashmap_entry in delta_base_cache_entry coccicheck: detect hashmap_entry.hash assignment diff: use hashmap_entry_init on moved_entry.ent
2019-10-11Merge branch 'bc/object-id-part17'Libravatar Junio C Hamano1-1/+1
Preparation for SHA-256 upgrade continues. * bc/object-id-part17: (26 commits) midx: switch to using the_hash_algo builtin/show-index: replace sha1_to_hex rerere: replace sha1_to_hex builtin/receive-pack: replace sha1_to_hex builtin/index-pack: replace sha1_to_hex packfile: replace sha1_to_hex wt-status: convert struct wt_status to object_id cache: remove null_sha1 builtin/worktree: switch null_sha1 to null_oid builtin/repack: write object IDs of the proper length pack-write: use hash_to_hex when writing checksums sequencer: convert to use the_hash_algo bisect: switch to using the_hash_algo sha1-lookup: switch hard-coded constants to the_hash_algo config: use the_hash_algo in abbrev comparison combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo bundle: switch to use the_hash_algo connected: switch GIT_SHA1_HEXSZ to the_hash_algo show-index: switch hard-coded constants to the_hash_algo blame: remove needless comparison with GIT_SHA1_HEXSZ ...
2019-10-07hashmap: remove type arg from hashmap_{get,put,remove}_entryLibravatar Eric Wong1-2/+1
Since these macros already take a `keyvar' pointer of a known type, we can rely on OFFSETOF_VAR to get the correct offset without relying on non-portable `__typeof__' and `offsetof'. Argument order is also rearranged, so `keyvar' and `member' are sequential as they are used as: `keyvar->member' Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07OFFSETOF_VAR macro to simplify hashmap iteratorsLibravatar Eric Wong1-1/+0
While we cannot rely on a `__typeof__' operator being portable to use with `offsetof'; we can calculate the pointer offset using an existing pointer and the address of a member using pointer arithmetic for compilers without `__typeof__'. This allows us to simplify usage of hashmap iterator macros by not having to specify a type when a pointer of that type is already given. In the future, list iterator macros (e.g. list_for_each_entry) may also be implemented using OFFSETOF_VAR to save hackers the trouble of using container_of/list_entry macros and without relying on non-portable `__typeof__'. v3: use `__typeof__' to avoid clang warnings Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap: introduce hashmap_free_entriesLibravatar Eric Wong1-1/+1
`hashmap_free_entries' behaves like `container_of' and passes the offset of the hashmap_entry struct to the internal `hashmap_free_' function, allowing the function to free any struct pointer regardless of where the hashmap_entry field is located. `hashmap_free' no longer takes any arguments aside from the hashmap itself. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap: use *_entry APIs for iterationLibravatar Eric Wong1-2/+3
Inspired by list_for_each_entry in the Linux kernel. Once again, these are somewhat compromised usability-wise by compilers lacking __typeof__ support. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_cmp_fn takes hashmap_entry paramsLibravatar Eric Wong1-4/+6
Another step in eliminating the requirement of hashmap_entry being the first member of a struct. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_get{,_from_hash} return "struct hashmap_entry *"Libravatar Eric Wong1-1/+2
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash or container_of as appropriate. This is another step towards eliminating the requirement of hashmap_entry being the first field in a struct. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_get takes "const struct hashmap_entry *"Libravatar Eric Wong1-1/+1
This is less error-prone than "const void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_add takes "struct hashmap_entry *"Libravatar Eric Wong1-1/+1
This is less error-prone than "void *" as the compiler now detects invalid types being passed. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07hashmap_entry_init takes "struct hashmap_entry *"Libravatar Eric Wong1-2/+2
C compilers do type checking to make life easier for us. So rely on that and update all hashmap_entry_init callers to take "struct hashmap_entry *" to avoid future bugs while improving safety and readability. Signed-off-by: Eric Wong <e@80x24.org> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-18Merge branch 'cc/multi-promisor'Libravatar Junio C Hamano1-5/+0
Teach the lazy clone machinery that there can be more than one promisor remote and consult them in order when downloading missing objects on demand. * cc/multi-promisor: Move core_partial_clone_filter_default to promisor-remote.c Move repository_format_partial_clone to promisor-remote.c Remove fetch-object.{c,h} in favor of promisor-remote.{c,h} remote: add promisor and partial clone config to the doc partial-clone: add multiple remotes in the doc t0410: test fetching from many promisor remotes builtin/fetch: remove unique promisor remote limitation promisor-remote: parse remote.*.partialclonefilter Use promisor_remote_get_direct() and has_promisor_remote() promisor-remote: use repository_format_partial_clone promisor-remote: add promisor_remote_reinit() promisor-remote: implement promisor_remote_get_direct() Add initial support for many promisor remotes fetch-object: make functions return an error code t0410: remove pipes after git commands
2019-09-09Merge branch 'ds/feature-macros'Libravatar Junio C Hamano1-24/+0
A mechanism to affect the default setting for a (related) group of configuration variables is introduced. * ds/feature-macros: repo-settings: create feature.experimental setting repo-settings: create feature.manyFiles setting repo-settings: parse core.untrackedCache commit-graph: turn on commit-graph by default t6501: use 'git gc' in quiet mode repo-settings: consolidate some config settings
2019-08-19config: use the_hash_algo in abbrev comparisonLibravatar brian m. carlson1-1/+1
Switch one use of a hard-coded 40 constant to use the_hash_algo. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-13repo-settings: parse core.untrackedCacheLibravatar Derrick Stolee1-24/+0
The core.untrackedCache config setting is slightly complicated, so clarify its use and centralize its parsing into the repo settings. The default value is "keep" (returned as -1), which persists the untracked cache if it exists. If the value is set as "false" (returned as 0), then remove the untracked cache if it exists. If the value is set as "true" (returned as 1), then write the untracked cache and persist it. Instead of relying on magic values of -1, 0, and 1, split these options into an enum. This allows the use of "-1" as a default value. After parsing the config options, if the value is unset we can initialize it to UNTRACKED_CACHE_KEEP. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-06config: stop checking whether the_repository is NULLLibravatar Jeff King1-1/+1
Since the previous commit, our invariant that the_repository is never NULL is restored, and we can stop being defensive in include_by_branch(). We can confirm the fix by showing that an onbranch config include will not cause a segfault when run outside a git repository. I've put this in t1309-early-config since it's related to the case added by 85fe0e800c (config: work around bug with includeif:onbranch and early config, 2019-07-31), though technically the issue was with read_very_early_config() and not read_early_config(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-31config: work around bug with includeif:onbranch and early configLibravatar Johannes Schindelin1-1/+2
Since 07b2c0eacac (config: learn the "onbranch:" includeIf condition, 2019-06-05), there is a potential catch-22 in the early config path: if the `include.onbranch:` feature is used, Git assumes that the Git directory has been initialized already. However, in the early config code path that is not true. One way to trigger this is to call the following commands in any repository: git config includeif.onbranch:refs/heads/master.path broken git help -a The symptom triggered by the `git help -a` invocation reads like this: BUG: refs.c:1851: attempting to get main_ref_store outside of repository Let's work around this, simply by ignoring the `includeif.onbranch:` setting when parsing the config when the ref store has not been initialized (yet). Technically, there is a way to solve this properly: teach the refs machinery to initialize the ref_store from a given gitdir/commondir pair (which we _do_ have in the early config code path), and then use that in `include_by_branch()`. This, however, is a pretty involved project, and we're already in the feature freeze for Git v2.23.0. Note: when calling above-mentioned two commands _outside_ of any Git worktree (passing the `--global` flag to `git config`, as there is obviously no repository config available), at the point when `include_by_branch()` is called, `the_repository` is `NULL`, therefore we have to be extra careful not to dereference it in that case. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-25Merge branch 'ab/test-env'Libravatar Junio C Hamano1-9/+19
Many GIT_TEST_* environment variables control various aspects of how our tests are run, but a few followed "non-empty is true, empty or unset is false" while others followed the usual "there are a few ways to spell true, like yes, on, etc., and also ways to spell false, like no, off, etc." convention. * ab/test-env: env--helper: mark a file-local symbol as static tests: make GIT_TEST_FAIL_PREREQS a boolean tests: replace test_tristate with "git env--helper" tests README: re-flow a previously changed paragraph tests: make GIT_TEST_GETTEXT_POISON a boolean t6040 test: stop using global "script" variable config.c: refactor die_bad_number() to not call gettext() early env--helper: new undocumented builtin wrapping git_env_*() config tests: simplify include cycle test
2019-07-09Merge branch 'rs/config-unit-parsing'Libravatar Junio C Hamano1-21/+18
The code to parse scaled numbers out of configuration files has been made more robust and also easier to follow. * rs/config-unit-parsing: config: simplify parsing of unit factors config: don't multiply in parse_unit_factor() config: use unsigned_mult_overflows to check for overflows
2019-07-09Merge branch 'js/gcc-8-and-9'Libravatar Junio C Hamano1-2/+2
Code clean-up for new compilers. * js/gcc-8-and-9: config: avoid calling `labs()` on too-large data type winansi: simplify loading the GetCurrentConsoleFontEx() function kwset: allow building with GCC 8 poll (mingw): allow compiling with GCC 8 and DEVELOPER=1
2019-06-25Move core_partial_clone_filter_default to promisor-remote.cLibravatar Christian Couder1-5/+0
Now that we can have a different default partial clone filter for each promisor remote, let's hide core_partial_clone_filter_default as a static in promisor-remote.c to avoid it being use for anything other than managing backward compatibility. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-24config: simplify parsing of unit factorsLibravatar René Scharfe1-18/+12
Just return the value of the factor or zero for unrecognized strings instead of using an output reference and a separate return value to indicate success. This is shorter and simpler. It basically reverts that function to before c8deb5a146 ("Improve error messages when int/long cannot be parsed from config", 2007-12-25), while keeping the better messages, so restore its old name, get_unit_factor(), as well. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-24config: don't multiply in parse_unit_factor()Libravatar René Scharfe1-7/+9
parse_unit_factor() multiplies the number that is passed to it with the value of a recognized unit factor (K, M or G for 2^10, 2^20 and 2^30, respectively). All callers pass in 1 as a number, though, which allows them to check the actual multiplication for overflow before they are doing it themselves. Ignore the passed in number and don't multiply, as this feature of parse_unit_factor() is not used anymore. Rename the output parameter to reflect that it's not about the end result anymore, but just about the unit factor. Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-24config: use unsigned_mult_overflows to check for overflowsLibravatar René Scharfe1-6/+7
parse_unit_factor() checks if a K, M or G is present after a number and multiplies it by 2^10, 2^20 or 2^30, respectively. One of its callers checks if the result is smaller than the number alone to detect overflows. The other one passes 1 as the number and does multiplication and overflow check itself in a similar manner. This works, but is inconsistent, and it would break if we added support for a bigger unit factor. E.g. 16777217T is 2^64 + 2^40, i.e. too big for a 64-bit number. Modulo 2^64 we get 2^40 == 1TB, which is bigger than the raw number 16777217 == 2^24 + 1, so the overflow would go undetected by that method. Let both callers pass 1 and handle overflow check and multiplication themselves. Do the check before the multiplication, using unsigned_mult_overflows, which is simpler and can deal with larger unit factors. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-21tests: make GIT_TEST_GETTEXT_POISON a booleanLibravatar Ævar Arnfjörð Bjarmason1-0/+9
Change the GIT_TEST_GETTEXT_POISON variable from being "non-empty?" to being a more standard boolean variable. Since it needed to be checked in both C code and shellscript (via test -n) it was one of the remaining shellscript-like variables. Now that we have "env--helper" we can change that. There's a couple of tricky edge cases that arise because we're using git_env_bool() early, and the config-reading "env--helper". If GIT_TEST_GETTEXT_POISON is set to an invalid value die_bad_number() will die, but to do so it would usually call gettext(). Let's detect the special case of GIT_TEST_GETTEXT_POISON and always emit that message in the C locale, lest we infinitely loop. As seen in the updated tests in t0017-env-helper.sh there's also a caveat related to "env--helper" needing to read the config for trace2 purposes. Since the C_LOCALE_OUTPUT prerequisite is lazy and relies on "env--helper" we could get invalid results if we failed to read the config (e.g. because we'd loop on includes) when combined with e.g. "test_i18ngrep" wanting to check with "env--helper" if GIT_TEST_GETTEXT_POISON was true or not. I'm crossing my fingers and hoping that a test similar to the one I removed in the earlier "config tests: simplify include cycle test" change in this series won't happen again, and testing for this explicitly in "env--helper"'s own tests. This change breaks existing uses of e.g. GIT_TEST_GETTEXT_POISON=YesPlease, which we've documented in po/README and other places. As noted in [1] we might want to consider also accepting "YesPlease" in "env--helper" as a special-case. But as the lack of uproar over 6cdccfce1e ("i18n: make GETTEXT_POISON a runtime option", 2018-11-08) demonstrates the audience for this option is a really narrow set of git developers, who shouldn't have much trouble modifying their test scripts, so I think it's better to deal with that minor headache now and make all the relevant GIT_TEST_* variables boolean in the same way than carry the "YesPlease" special-case forward. 1. https://public-inbox.org/git/xmqqtvckm3h8.fsf@gitster-ct.c.googlers.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-21config.c: refactor die_bad_number() to not call gettext() earlyLibravatar Ævar Arnfjörð Bjarmason1-9/+10
Prepare die_bad_number() for a change to specially handle GIT_TEST_GETTEXT_POISON calling git_env_bool() by making die_bad_number() not call gettext() early, which would in turn call git_env_bool(). There's no meaningful change here yet, just a re-arrangement of the current code to make that subsequent change easier to read. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-13config: avoid calling `labs()` on too-large data typeLibravatar Johannes Schindelin1-2/+2
The `labs()` function operates, as the initial `l` suggests, on `long` parameters. However, in `config.c` we tried to use it on values of type `intmax_t`. This problem was found by GCC v9.x. To fix it, let's just "unroll" the function (i.e. negate the value if it is negative). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-05config: learn the "onbranch:" includeIf conditionLibravatar Denton Liu1-2/+29
Currently, if a user wishes to have individual settings per branch, they are required to manually keep track of the settings in their head and manually set the options on the command-line or change the config at each branch. Teach config the "onbranch:" includeIf condition so that it can conditionally include configuration files if the branch that is checked out in the current worktree matches the pattern given. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-13Merge branch 'jh/trace2-sid-fix'Libravatar Junio C Hamano1-5/+25
Polishing of the new trace2 facility continues. The system-level configuration can specify site-wide trace2 settings, which can be overridden with per-user configuration and environment variables. * jh/trace2-sid-fix: trace2: fixup access problem on /etc/gitconfig in read_very_early_config trace2: update docs to describe system/global config settings trace2: make SIDs more unique trace2: clarify UTC datetime formatting trace2: report peak memory usage of the process trace2: use system/global config for default trace2 settings config: add read_very_early_config() trace2: find exec-dir before trace2 initialization trace2: add absolute elapsed time to start event trace2: refactor setting process starting time config: initialize opts structure in repo_read_config()
2019-05-07trace2: fixup access problem on /etc/gitconfig in read_very_early_configLibravatar Jeff Hostetler1-1/+4
Teach do_git_config_sequence() to optionally gently check for access to the system config. Use this option in read_very_early_config() when initializing trace2. In [1] SZEDER Gábor reported that my changes in [2] introduced a regression when the user does not have permission to read the system config. This commit addresses that problem by optionally ignoring that error. [1] https://public-inbox.org/git/285beb2b2d740ce20fdd8af1becf371ab39703db.1554995916.git.gitgitgadget@gmail.com/T/#m342e839289aec515523a98b5e34d7f42d3f1fd79 [2] https://public-inbox.org/git/285beb2b2d740ce20fdd8af1becf371ab39703db.1554995916.git.gitgitgadget@gmail.com/T/#m11b59c9228c698442f750ee8f9b10c629399ae48 Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-22Merge branch 'nd/include-if-wildmatch'Libravatar Junio C Hamano1-1/+1
A buglet in configuration parser has been fixed. * nd/include-if-wildmatch: config: correct '**' matching in includeIf patterns
2019-04-16config: add read_very_early_config()Libravatar Jeff Hostetler1-3/+20
Created an even lighter version of read_early_config() that only looks at system and global config settings. It omits repo-local, worktree-local, and command-line settings. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16config: initialize opts structure in repo_read_config()Libravatar Jeff Hostetler1-1/+1
Initialize opts structure in repo_read_config(). This change fixes a crash in later commit after a new field is added to the structure. In commit 3b256228a66f8587661481ef3e08259864f3ba2a, repo_read_config() was added. It only initializes 3 fields in the opts structure. It is passed to config_with_options() and then to do_git_config_sequence(). However, do_git_config_sequence() drops the opts on the floor and calls git_config_from_file() rather than git_config_from_file_with_options(), so that may be why this hasn't been a problem in the past. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>