| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
|
|
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
|
|
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
|
|
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
|
|
'branch_track' feels more closely related to branching, and it is
needed later in branch.h; rather than #include'ing cache.h in branch.h
for this small enum, just move the enum and the external declaration
for git_branch_track to branch.h.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user reported a submodule issue regarding a section mix-up,
but it could be boiled down to the following test case:
$ git init test && cd test
$ git config foo."Bar".key test
$ git config foo."bar".key test
$ tail -n 3 .git/config
[foo "Bar"]
key = test
key = test
Sub sections are case sensitive and we have a test for correctly reading
them. However we do not have a test for writing out config correctly with
case sensitive subsection names, which is why this went unnoticed in
6ae996f2acf (git_config_set: make use of the config parser's event
stream, 2018-04-09)
Unfortunately we have to make a distinction between old style configuration
that looks like
[foo.Bar]
key = test
and the new quoted style as seen above. The old style is documented as
case-agnostic, hence we need to keep 'strncasecmp'; although the
resulting setting for the old style config differs from the configuration.
That will be fixed in a follow up patch.
Reported-by: JP Sugarbroad <jpsugar@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The singleton commit-graph in-core instance is made per in-core
repository instance.
* jt/commit-graph-per-object-store:
commit-graph: add repo arg to graph readers
commit-graph: store graph in struct object_store
commit-graph: add free_commit_graph
commit-graph: add missing forward declaration
object-store: add missing include
commit-graph: refactor preparing commit graph
|
|
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can already disable replace refs using a command line
option or environment variable, but those are awkward to
apply universally. Let's add a config option to do the same
thing.
That raises the question of why one might want to do so
universally. The answer is that replace refs violate the
immutability of objects. For instance, if you wanted to
cache the diff between commit XYZ and its parent, then in
theory that never changes; the hash XYZ represents the total
state. But replace refs violate that; pushing up a new ref
may create a completely new diff.
The obvious "if it hurts, don't do it" answer is not to
create replace refs if you're doing this kind of caching.
But for a site hosting arbitrary repositories, they may want
to allow users to share replace refs with each other, but
not actually respect them on the site (because the caching
is more important than the replace feature).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The underlying config parser knows how to handle a
config_options struct, but git_config_from_mem() always
passes NULL. Let's allow our callers to specify the options
struct.
We could add a "_with_options" variant, but since there are
only a handful of callers, let's just update them to pass
NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can currently die() or error(), but there's not yet any
way for callers to ask us just to quietly return an error.
Let's give them one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config code has a die_on_error flag, which lets us emit
an error() instead of dying when we see a bogus config file.
But there's no way for a caller of the config code to set
this: it's auto-set based on whether we're reading a file or
a blob.
Instead, let's add it to the config_options struct. When
it's not set (or we have no options) we'll continue to fall
back to the existing file/blob behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Fix for 2.17-era regression around `core.safecrlf`.
* as/safecrlf-quiet-fix:
config.c: fix regression for core.safecrlf false
|
|
The .gitmodules file is not meant as a place to store arbitrary
configuration to distribute with the repository.
Move config_from_gitmodules() out of config.c and into
submodule-config.c to make it even clearer that it is not a mechanism to
retrieve arbitrary configuration from the .gitmodules file.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
|
|
http-backend reads whole input until EOF. However, the RFC 3875 specifies
that a script must read only as many bytes as specified by CONTENT_LENGTH
environment variable. Web server may exercise the specification by not closing
the script's standard input after writing content. In that case http-backend
would hang waiting for the input. The issue is known to happen with
IIS/Windows, for example.
Make http-backend read only CONTENT_LENGTH bytes, if it's defined, rather than
the whole input until EOF. If the variable is not defined, keep older behavior
of reading until EOF because it is used to support chunked transfer-encoding.
This commit only fixes buffered input, whcih reads whole body before
processign it. Non-buffered input is going to be fixed in subsequent commit.
Signed-off-by: Florian Manschwetus <manschwetus@cs-software-gmbh.de>
[mk: fixed trivial build failures and polished style issues]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A regression introduced in 8462ff43 ("convert_to_git():
safe_crlf/checksafe becomes int conv_flags", 2018-01-13) back in Git
2.17 cycle caused autocrlf rewrites to produce a warning message
despite setting safecrlf=false.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Acked-By: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leak plugging.
* ma/config-store-data-clear:
config: let `config_store_data_clear()` handle `key`
config: let `config_store_data_clear()` handle `value_regex`
config: free resources of `struct config_store_data`
|
|
Error codepath fix.
* js/empty-config-section-fix:
config: a user-provided invalid section is not a BUG
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
Instead of hard coding the name-to-id mapping in C code, keep it in an
array and use a common function to do the parsing. This reduces code
and also allows us to list all possible color slots later.
This starts using C99 designated initializers more for convenience
(the first designated initializers have been introduced in builtin/clean.c
for some time without complaints)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of remembering to free `key` in each code path, let
`config_store_data_clear()` handle that.
We still need to free it before replacing it, though. Move that freeing
closer to the replacing to be safe. Note that in that same part of the
code, we can no longer set `key` to the original pointer, but need to
`xstrdup()` it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of duplicating the logic for clearing up `value_regex`, let
`config_store_data_clear()` handle that.
When `regcomp()` fails, the current code does not call `regfree()`. Make
sure we do the same by immediately invalidating `value_regex`. Some
implementations are able to handle such an extra `regfree()`-call [1],
but from the example in [2], we should not do so. (The language itself
in [2] is not super-clear on this.)
[1] https://www.redhat.com/archives/libvir-list/2013-September/msg00262.html
[2] http://pubs.opengroup.org/onlinepubs/9699919799/functions/regcomp.html
Researched-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit fee8572c6d (config: avoid using the global variable `store`,
2018-04-09) dropped the staticness of a certain struct, instead letting
the users create an instance on the stack and pass around a pointer.
We do not free all the memory that the struct tracks. When the struct
was static, the memory would always be reachable. Now that we keep the
struct on the stack, though, as soon as we return, it goes out of scope
and we leak the memory it points to. In particular, we leak the memory
pointed to by the `parsed` and `seen` fields.
Introduce and use a helper function `config_store_data_clear()` to plug
these leaks. The memory tracked here is config parser events. Once the
users (`git_config_set_multivar_in_file_gently()` and
`git_config_copy_or_rename_section_in_file()` at the moment) are done,
no-one should be holding on to a pointer into this memory.
There are two more members of the struct that are candidates for freeing
in this new function (`key` and `value_regex`). Those are actually
already being taken care of. The next couple of patches will move their
freeing into the function we are adding here.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was pointed out by Jeff King while the empty-config-section-fix
patch series was cooking, and was not addressed in time for that patch
series to advance to `master`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error messages from "git push" can be painted for more visibility.
* js/colored-push-errors:
config: document the settings to colorize push errors/hints
push: test to verify that push errors are colored
push: colorize errors
color: introduce support for colorizing stderr
|
|
"git config --get" learned the "--default" option, to help the
calling script. Building on top of the tb/config-type topic, the
"git config" learns "--type=color" type. Taken together, you can
do things like "git config --get foo.color --default blue" and get
the ANSI color sequence for the color given to foo.color variable,
or "blue" if the variable does not exist.
* tb/config-default:
builtin/config: introduce `color` type specifier
config.c: introduce 'git_config_color' to parse ANSI colors
builtin/config: introduce `--default`
|
|
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
|
|
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
|
|
"git config --unset a.b", when "a.b" is the last variable in an
otherwise empty section "a", left an empty section "a" behind, and
worse yet, a subsequent "git config a.c value" did not reuse that
empty shell and instead created a new one. These have been
(partially) corrected.
* js/empty-config-section-fix:
git_config_set: reuse empty sections
git config --unset: remove empty sections (in the common case)
git_config_set: make use of the config parser's event stream
git_config_set: do not use a state machine
config_set_store: rename some fields for consistency
config: avoid using the global variable `store`
config: introduce an optional event stream while parsing
t1300: `--unset-all` can leave an empty section behind (bug)
t1300: add a few more hairy examples of sections becoming empty
t1300: remove unreasonable expectation from TODO
t1300: avoid relying on a bug
config --replace-all: avoid extra line breaks
t1300: demonstrate that --replace-all can "invent" newlines
t1300: rename it to reflect that `repo-config` was deprecated
git_config_set: fix off-by-two
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename bunch of source files to more consistently use dashes
instead of underscores to connect words.
* sb/filenames-with-dashes:
replace_object.c: rename to use dash in file name
sha1_file.c: rename to use dash in file name
sha1_name.c: rename to use dash in file name
exec_cmd: rename to use dash in file name
unicode_width.h: rename to use dash in file name
write_or_die.c: rename to use dashes in file name
|
|
Code clean-up.
* jk/flockfile-stdio:
config: move flockfile() closer to unlocked functions
|
|
This is an attempt to resolve an issue I experience with people that are
new to Git -- especially colleagues in a team setting -- where they miss
that their push to a remote location failed because the failure and
success both return a block of white text.
An example is if I push something to a remote repository and then a
colleague attempts to push to the same remote repository and the push
fails because it requires them to pull first, but they don't notice
because a success and failure both return a block of white text. They
then continue about their business, thinking it has been successfully
pushed.
This patch colorizes the errors and hints (in red and yellow,
respectively) so whenever there is a failure when pushing to a remote
repository that fails, it is more noticeable.
[jes: fixed a couple bugs, added the color.{advice,push,transport}
settings, refactored to use want_color_stderr().]
Signed-off-by: Ryan Dammrose ryandammrose@gmail.com
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for adding `--type=color` to the `git-config(1)` builtin,
let's introduce a color parsing utility, `git_config_color` in a similar
fashion to `git_config_<type>`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
UTF supports lossless conversion round tripping and conversions between
UTF and other encodings are mostly round trip safe as Unicode aims to be
a superset of all other character encodings. However, certain encodings
(e.g. SHIFT-JIS) are known to have round trip issues [1].
Add 'core.checkRoundtripEncoding', which contains a comma separated
list of encodings, to define for what encodings Git should check the
conversion round trip if they are used in the 'working-tree-encoding'
attribute.
Set SHIFT-JIS as default value for 'core.checkRoundtripEncoding'.
[1] https://support.microsoft.com/en-us/help/170559/prb-conversion-problem-between-shift-jis-and-unicode
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
The commit graph feature is controlled by the new core.commitGraph config
setting. This defaults to 0, so the feature is opt-in.
The intention of core.commitGraph is that a user can always stop checking
for or parsing commit graph files if core.commitGraph=0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ben Peart
Jean-Noël Avila
Elijah Newren
Stefan Beller
Nguyễn Thái Ngọc Duy
Jeff King
Jonathan Tan
Antonio Ospite
Max Kirillov
Anthony Sottile
Martin Ågren
Johannes Schindelin
Ryan Dammrose
Taylor Blau
Lars Schneider
Derrick Stolee