summaryrefslogtreecommitdiff
path: root/command-list.txt
AgeCommit message (Collapse)AuthorFilesLines
2018-10-26Merge branch 'du/cherry-is-plumbing'Libravatar Junio C Hamano1-1/+1
Doc update to mark "git cherry" as a plumbing command. * du/cherry-is-plumbing: doc: move git-cherry to plumbing
2018-10-26Merge branch 'du/get-tar-commit-id-is-plumbing'Libravatar Junio C Hamano1-1/+1
Doc update to mark "git get-tar-commit-id" as a plumbing command. * du/get-tar-commit-id-is-plumbing: doc: move git-get-tar-commit-id to plumbing
2018-10-26Merge branch 'du/rev-parse-is-plumbing'Libravatar Junio C Hamano1-1/+1
Doc update. * du/rev-parse-is-plumbing: doc: move git-rev-parse from porcelain to plumbing
2018-10-12doc: move git-cherry to plumbingLibravatar Daniels Umanovskis1-1/+1
Also remove git-cherry from Bash completion because plumbing commands do not belong there. Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-12doc: move git-get-tar-commit-id to plumbingLibravatar Daniels Umanovskis1-1/+1
This is definitely a low-level command, it's hard to argue against it belonging in plumbing. Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-11doc: move git-rev-parse from porcelain to plumbingLibravatar Daniels Umanovskis1-1/+1
git-rev-parse mostly seems like plumbing, and is more usd in scripts than in regular use. Online it's often mentioned as a plumbing command. Nonetheless it's listed under porcelain interrogators in `man git`. It seems appropriate to formally move git-rev-parse to plumbing interrogators. Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20Sync 'ds/multi-pack-index' to v2.19.0-rc0Libravatar Junio C Hamano1-0/+1
* ds/multi-pack-index: (23 commits) midx: clear midx on repack packfile: skip loading index if in multi-pack-index midx: prevent duplicate packfile loads midx: use midx in approximate_object_count midx: use existing midx when writing new one midx: use midx in abbreviation calculations midx: read objects from multi-pack-index config: create core.multiPackIndex setting midx: write object offsets midx: write object id fanout chunk midx: write object ids in a chunk midx: sort and deduplicate objects from packfiles midx: read pack names into array multi-pack-index: write pack names in chunk multi-pack-index: read packfile list packfile: generalize pack directory list t5319: expand test data multi-pack-index: load into memory midx: write header information to lockfile multi-pack-index: add 'write' verb ...
2018-08-13Introduce `range-diff` to compare iterations of a topic branchLibravatar Johannes Schindelin1-0/+1
This command does not do a whole lot so far, apart from showing a usage that is oddly similar to that of `git tbdiff`. And for a good reason: the next commits will turn `range-branch` into a full-blown replacement for `tbdiff`. At this point, we ignore tbdiff's color options, as they will all be implemented later using diff_options. Since f318d739159 (generate-cmds.sh: export all commands to command-list.h, 2018-05-10), every new command *requires* a man page to build right away, so let's also add a blank man page, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20multi-pack-index: add builtinLibravatar Derrick Stolee1-0/+1
This new 'git multi-pack-index' builtin will be the plumbing access for writing, reading, and checking multi-pack-index files. The initial implementation is a no-op. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-01Merge branch 'nd/command-list'Libravatar Junio C Hamano1-29/+81
The list of commands with their various attributes were spread across a few places in the build procedure, but it now is getting a bit more consolidated to allow more automation. * nd/command-list: completion: allow to customize the completable command list completion: add and use --list-cmds=alias completion: add and use --list-cmds=nohelpers Move declaration for alias.c to alias.h completion: reduce completable command list completion: let git provide the completable command list command-list.txt: documentation and guide line help: use command-list.txt for the source of guides help: add "-a --verbose" to list all commands with synopsis git: support --list-cmds=list-<category> completion: implement and use --list-cmds=main,others git --list-cmds: collect command list in a string_list git.c: convert --list-* to --list-cmds=* Remove common-cmds.h help: use command-list.h for common command list generate-cmds.sh: export all commands to command-list.h generate-cmds.sh: factor out synopsis extract code
2018-05-21completion: reduce completable command listLibravatar Nguyễn Thái Ngọc Duy1-9/+9
The following commands are removed from the complete list: - annotate obsolete, discouraged to use - filter-branch not often used - get-tar-commit-id not often used - imap-send not often used - interpreter-trailers not for interactive use - name-rev plumbing, just use git-describe - p4 too short and probably not often used (*) - svn same category as p4 (*) - verify-commit not often used (*) to be fair, send-email command which is in the same foreignscminterface group as svn and p4 does get completion, just because it's used by git and kernel development. So maybe we should include them. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-21completion: let git provide the completable command listLibravatar Nguyễn Thái Ngọc Duy1-26/+27
Instead of maintaining a separate list of command classification, which often could go out of date, let's centralize the information back in git. While the function in git-completion.bash implies "list porcelain commands", that's not exactly what it does. It gets all commands (aka --list-cmds=main,others) then exclude certain non-porcelain ones. We could almost recreate this list two lists list-mainporcelain and others. The non-porcelain-but-included-anyway is added by the third category list-complete. Note that the current completion script incorrectly classifies filter-branch as porcelain and t9902 tests this behavior. We keep it this way in t9902 because this test does not really care which particular command is porcelain or plumbing, they're just names. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-21command-list.txt: documentation and guide lineLibravatar Nguyễn Thái Ngọc Duy1-0/+45
This is intended to help anybody who needs to update command-list.txt. It gives a brief introduction of all attributes a command can take. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-21help: use command-list.txt for the source of guidesLibravatar Nguyễn Thái Ngọc Duy1-0/+16
The help command currently hard codes the list of guides and their summary in C. Let's move this list to command-list.txt. This lets us extract summary lines from Documentation/git*.txt. This also potentially lets us list guides in git.txt, but I'll leave that for now. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-10help: use command-list.h for common command listLibravatar Nguyễn Thái Ngọc Duy1-10/+0
The previous commit added code generation for all_cmd_desc[] which includes almost everything we need to generate common command list. Convert help code to use that array instead and drop common_cmds[] array. The description of each common command group is removed from command-list.txt. This keeps this file format simpler. common-cmds.h will not be generated correctly after this change due to the command-list.txt format change. But it does not matter and common-cmds.h will be removed. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-10generate-cmds.sh: export all commands to command-list.hLibravatar Nguyễn Thái Ngọc Duy1-2/+2
The current generate-cmds.sh generates just enough to print "git help" output. That is, it only extracts help text for common commands. The script is now updated to extract help text for all commands and keep command classification a new file, command-list.h. This will be useful later: - "git help -a" could print a short summary of all commands instead of just the common ones. - "git" could produce a list of commands of one or more category. One of its use is to reduce another command classification embedded in git-completion.bash. The new file can be generated but is not used anywhere yet. The plan is we migrate away from common-cmds.h. Then we can kill off common-cmds.h build rules and generation code (and also delete duplicate content in command-list.h which we keep for now to not mess generate-cmds.sh up too much). PS. The new fixed column requirement on command-list.txt is technically not needed. But it helps simplify the code a bit at this stage. We could lift this restriction later if we want to. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-02commit-graph: create git-commit-graph builtinLibravatar Derrick Stolee1-0/+1
Teach git the 'commit-graph' builtin that will be used for writing and reading packed graph files. The current implementation is mostly empty, except for an '--object-dir' option. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-25relink: retire the commandLibravatar Johannes Schindelin1-1/+0
Back in the olden days, when all objects were loose and rubber boots were made out of wood, it made sense to try to share (immutable) objects between repositories. Ever since the arrival of pack files, it is but an anachronism. Let's move the script to the contrib/examples/ directory and no longer offer it. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-13Merge branch 'nd/multiple-work-trees'Libravatar Junio C Hamano1-0/+1
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles checking if the current branch was checked out elsewhere, when we know we are not switching the branches ourselves. * nd/multiple-work-trees: worktree: new place for "git prune --worktrees" checkout: don't check worktrees when not necessary
2015-06-29worktree: new place for "git prune --worktrees"Libravatar Nguyễn Thái Ngọc Duy1-0/+1
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30) adds "--worktrees" to "git prune" without realizing that "git prune" is for object database only. This patch moves the same functionality to a new command "git worktree". Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
2015-05-21command-list.txt: drop the "common" tagLibravatar Sébastien Guimmara1-21/+21
command-list.sh, retired in the previous patch, was the only consumer of the "common" tag, so drop this now-unnecessary attribute. before: git-add mainporcelain common worktree after: git-add mainporcelain worktree Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-21command-list.txt: add the common groups blockLibravatar Sébastien Guimmara1-20/+30
The ultimate goal is for "git help" to display common commands in groups rather than alphabetically. As a first step, define the groups in a new block, and then assign a group to each common command. Add a block at the beginning of command-list.txt: init start a working area (see also: git help tutorial) worktree work on the current change (see also:[...] info examine the history and state (see also: git [...] history grow, mark and tweak your history remote collaborate (see also: git help workflows) storing information about common commands group, then map each common command to a group: git-add mainporcelain common worktree Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Emma Jane Hogbin Westby <emma.westby@gmail.com> Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-21command-list: prepare machinery for upcoming "common groups" sectionLibravatar Eric Sunshine1-1/+1
The ultimate goal is for "git help" to classify common commands by group. Toward this end, a subsequent patch will add a new "common groups" section to command-list.txt preceding the actual command list. As preparation, teach existing command-list.txt parsing machinery, which doesn't care about grouping, to skip over this upcoming "common groups" section. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-08command-list.txt: fix whitespace inconsistencyLibravatar Sébastien Guimmara1-5/+5
The overwhelming majority of lines were single space aligned, except a few ones aligned by tabs. Fix inconsistency by using single space everywhere. Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-13Documentation: add documentation for 'git interpret-trailers'Libravatar Christian Couder1-0/+1
While at it add git-interpret-trailers to "command-list.txt". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-23verify-commit: scriptable commit signature verificationLibravatar Michael J Gruber1-0/+1
Commit signatures can be verified using "git show -s --show-signature" or the "%G?" pretty format and parsing the output, which is well suited for user inspection, but not for scripting. Provide a command "verify-commit" which is analogous to "verify-tag": It returns 0 for good signatures and non-zero otherwise, has the gpg output on stderr and (optionally) the commit object on stdout, sans the signature, just like "verify-tag" does. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12peek-remote: remove deprecated alias of ls-remoteLibravatar John Keeping1-1/+0
This has been deprecated since commit 87194d2 (Deprecate peek-remote, 2007-11-24), included in version 1.5.4. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12lost-found: remove deprecated commandLibravatar John Keeping1-1/+0
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate git-lost-found, 2007-11-08), included in version 1.5.4. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12tar-tree: remove deprecated commandLibravatar John Keeping1-1/+0
"git tar-tree" has been a thin wrapper around "git archive" since commit fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to git-archive, 2006-09-24), which also made it print a message indicating that git-tar-tree is deprecated. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12repo-config: remove deprecated alias for "git config"Libravatar John Keeping1-1/+0
The release notes for Git 1.5.4 say that "git repo-config" will be removed in the next feature release. Since Git 2.0 is nearly here, remove it. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-13builtin: add git-check-mailmap commandLibravatar Eric Sunshine1-0/+1
Introduce command check-mailmap, similar to check-attr and check-ignore, which allows direct testing of .mailmap configuration. As plumbing accessible to scripts and other porcelain, check-mailmap publishes the stable, well-tested .mailmap functionality employed by built-in Git commands. Consequently, script authors need not re-implement .mailmap functionality manually, thus avoiding potential quirks and behavioral differences. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23Merge branch 'as/check-ignore'Libravatar Junio C Hamano1-0/+1
Add a new command "git check-ignore" for debugging .gitignore files. The variable names may want to get cleaned up but that can be done in-tree. * as/check-ignore: clean.c, ls-files.c: respect encapsulation of exclude_list_groups t0008: avoid brace expansion add git-check-ignore sub-command setup.c: document get_pathspec() add.c: extract new die_if_path_beyond_symlink() for reuse add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse pathspec.c: rename newly public functions for clarity add.c: move pathspec matchers into new pathspec.c for reuse add.c: remove unused argument from validate_pathspec() dir.c: improve docs for match_pathspec() and match_pathspec_depth() dir.c: provide clear_directory() for reclaiming dir_struct memory dir.c: keep track of where patterns came from dir.c: use a single struct exclude_list per source of excludes Conflicts: builtin/ls-files.c dir.c
2013-01-06add git-check-ignore sub-commandLibravatar Adam Spiers1-0/+1
This works in a similar manner to git-check-attr. Thanks to Jeff King and Junio C Hamano for the idea: http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-08command-list: mention git-credential-* helpersLibravatar Jeff King1-0/+2
These commands were never added to the command-list. Adding them makes "make check-docs" run without complaint. While we're at it, let's capitalize the first letter of their one-line summaries to match the rest of the git manpages. The credential-cache--daemon command is somewhat special. It is already ignored by check-docs because it contains a "--", marking it as a non-interesting implementation detail. It is, in fact, documented, but since the documentation basically just redirects you to a more appropriate command anyway, let's explicitly omit it so it is not mentioned in git(1). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-08command-list: add git-sh-i18nLibravatar Jeff King1-0/+1
This is in the same category as git-sh-setup. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-08Documentation: list git-credential in plumbing commandsLibravatar Matthieu Moy1-0/+1
Commit e30b2feb1b (Jun 24 2012, add 'git credential' plumbing command) forgot to add git-credential to command-list.txt, hence the command was not appearing in the documentation, making it hard for users to discover it. While we're there, capitalize the description line for git-crendential for consistency with other commands. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03Merge branch 'nd/columns'Libravatar Junio C Hamano1-0/+1
A couple of commands learn --column option to produce columnar output. By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1) * nd/columns: tag: add --column column: support piping stdout to external git-column process status: add --column branch: add --column help: reuse print_columns() for help -a column: add dense layout support t9002: work around shells that are unable to set COLUMNS to 1 column: add columnar layout Stop starting pager recursively Add column layout skeleton and git-column
2012-04-27Add column layout skeleton and git-columnLibravatar Nguyễn Thái Ngọc Duy1-0/+1
A column option string consists of many token separated by either a space or a comma. A token belongs to one of three groups: - enabling: always, never and auto - layout mode: currently plain (which does not layout at all) - other future tuning flags git-column can be used to pipe output to from a command that wants column layout, but not to mess with its own output code. Simpler output code can be changed to use column layout code directly. Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-09git-p4: move to toplevelLibravatar Pete Wyckoff1-0/+1
Move git-p4 out of contrib/fast-import into the main code base, aside other foreign SCM tools. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-16Documentation: Link to gitweb(1) and gitweb.conf(5) in other manpagesLibravatar Jakub Narebski1-0/+1
Add link to gitweb(1) in "SEE ALSO" section of git-instaweb(1) manpage, and "Ancillary Commands" section of git(1) manpage (the latter by the way of command-list.txt file). Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-26Add git-http-backend to command-list.Libravatar Tarmigan Casebolt1-0/+1
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-20Merge branch 'jh/notes' (early part)Libravatar Junio C Hamano1-0/+1
* 'jh/notes' (early part): Add selftests verifying concatenation of multiple notes for the same commit Refactor notes code to concatenate multiple notes annotating the same object Add selftests verifying that we can parse notes trees with various fanouts Teach the notes lookup code to parse notes trees with various fanout schemes Teach notes code to free its internal data structures on request Add '%N'-format for pretty-printing commit notes Add flags to get_commit_notes() to control the format of the note string t3302-notes-index-expensive: Speed up create_repo() fast-import: Add support for importing commit notes Teach "-m <msg>" and "-F <file>" to "git notes edit" Add an expensive test for git-notes Speed up git notes lookup Add a script to edit/inspect notes Introduce commit notes Conflicts: .gitignore Documentation/pretty-formats.txt pretty.c
2009-10-19Add a script to edit/inspect notesLibravatar Johannes Schindelin1-0/+1
The script 'git notes' allows you to edit and show commit notes, by calling either git notes show <commit> or git notes edit <commit> This patch has been improved by the following contributions: - Tor Arne Vestbø: fix printing of multi-line notes - Michael J Gruber: test and handle empty notes gracefully - Thomas Rast: - only clean up message file when editing - use GIT_EDITOR and core.editor over VISUAL/EDITOR - t3301: fix confusing quoting in test for valid notes ref - t3301: use test_must_fail instead of ! - refuse to edit notes outside refs/notes/ - Junio C Hamano: tests: fix "export var=val" - Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt" - Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-11Documentation: add 'git replace' to main git manpageLibravatar SZEDER Gábor1-0/+1
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07difftool: move 'git-difftool' out of contribLibravatar David Aguilar1-0/+1
This prepares 'git-difftool' and its documentation for mainstream use. 'git-difftool-helper' became 'git-difftool--helper' since users should not use it directly. 'git-difftool' was added to the list of commands as an ancillaryinterrogator. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-10Revert "Merge branch 'js/notes'"Libravatar Junio C Hamano1-1/+0
This reverts commit 7b75b331f6744fbf953fe8913703378ef86a2189, reversing changes made to 5d680a67d7909c89af96eba4a2d77abed606292b.
2008-12-21Add a script to edit/inspect notesLibravatar Johannes Schindelin1-0/+1
The script 'git notes' allows you to edit and show commit notes, by calling either git notes show <commit> or git notes edit <commit> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-17Officially deprecate repo-config.Libravatar Junio C Hamano1-0/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-14Retire git-runstatus for real.Libravatar Junio C Hamano1-1/+0
The command was removed from the builtin command list and there was no way to invoke it, but the code was still there. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03Add git-fast-export to list of commands.Libravatar Junio C Hamano1-0/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>