| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85d (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We should keep these files sorted in the C locale, e.g. in the C
locale the order is:
git-check-mailmap
git-check-ref-format
git-checkout
But under en_US.UTF-8 it's:
git-check-mailmap
git-checkout
git-check-ref-format
In a subsequent commit I'll change generate-cmdlist.sh to use C sort
order, and without this change we'd be led to believe that that change
caused a meaningful change in the output, so let's do this as a
separate step, right now the generate-cmdlist.sh script just uses the
order found in this file.
Note that this refers to the sort order of the lines in
command-list.txt, a subsequent commit will also change how we treat
the sort order of the "category" fields, but that's unrelated to this
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since 'git sparse-checkout' was introduced [1] it is included in
'git --help' in the section "work on the current change" along with
the commands 'add', 'mv', 'restore', and 'rm'. It clearly doesn't
belong to that group, moreover it can't be considered such a common
command to belong to 'git --help' in the first place, so remove it
from there.
[1] 94c0956b60 (sparse-checkout: create builtin with 'list'
subcommand, 2019-11-21)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git-parse-remote" shell script library outlived its usefulness.
* ab/retire-parse-remote:
submodule: fix fetch_in_submodule logic
parse-remote: remove this now-unused library
submodule: remove sh function in favor of helper
submodule: use "fetch" logic instead of custom remote discovery
|
|
The previous two commits removed the last use of a function in this
library, but most of it had been dead code for a while[1][2]. Only the
"get_default_remote" function was still being used.
Even though we had a manual page for this library it was never
intended (or I expect, actually) used outside of git.git. Let's just
remove it, if anyone still cares about a function here they can pull
them into their own project[3].
1. Last use of error_on_missing_default_upstream():
d03ebd411c ("rebase: remove the rebase.useBuiltin setting",
2019-03-18)
2. Last use of get_remote_merge_branch(): 49eb8d39c7 ("Remove
contrib/examples/*", 2018-03-25)
3. https://lore.kernel.org/git/87a6vmhdka.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'gc' builtin is our current entrypoint for automatically maintaining
a repository. This one tool does many operations, such as repacking the
repository, packing refs, and rewriting the commit-graph file. The name
implies it performs "garbage collection" which means several different
things, and some users may not want to use this operation that rewrites
the entire object database.
Create a new 'maintenance' builtin that will become a more general-
purpose command. To start, it will only support the 'run' subcommand,
but will later expand to add subcommands for scheduling maintenance in
the background.
For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin.
In fact, the only option is the '--auto' toggle, which is handed
directly to the 'gc' builtin. The current change is isolated to this
simple operation to prevent more interesting logic from being lost in
all of the boilerplate of adding a new builtin.
Use existing builtin/gc.c file because we want to share code between the
two builtins. It is possible that we will have 'maintenance' replace the
'gc' builtin entirely at some point, leaving 'git gc' as an alias for
some specific arguments to 'git maintenance run'.
Create a new test_subcommand helper that allows us to test if a certain
subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a
file. A negation mode is available that will be used in later tests.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The guides 'gitcredentials' and 'gitremote-helpers' do not currently
appear in command-list.txt.
'gitcredentials' was forgotten back when guides were added to
command-list.txt in 1b81d8cb19 (help: use command-list.txt for the
source of guides, 2018-05-20).
'gitremote-helpers' was moved to section 7 in 439cc74632 (docs: move
gitremote-helpers into section 7, 2019-03-25), but command-list.txt was
not updated at the time.
Add these two guides to the list of guides in 'command-list.txt', so
that they appear in the output of 'git help --guides', and capitalize
the first word of the description of 'gitcredentials', as was done in
1b81d8c (help: use command-list.txt for the source of guides,
2018-05-20) for the other guides.
While at it, add a comment in Documentation/Makefile to remind developers
to update command-list.txt if they add a new guide.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes git would suggest the user to run `git prune` when there are
too many unreachable loose objects. It's more user-friendly if we add
git-prune into bash completion.
Signed-off-by: John Lin <johnlinp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git help guides" now includes the newly added FAQ document.
* bc/faq:
command-list.txt: add gitfaq to the list of guides
|
|
When 'gitfaq.txt' was added in 2149b6748f (docs: add a FAQ, 2020-03-30),
it was added to the Makefile but not to command-list.txt.
Add it there also, so that the new FAQ is listed in the output of
`git help --guides`.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach Git how to prompt the user for a good bug report: reproduction
steps, expected behavior, and actual behavior. Later, Git can learn how
to collect some diagnostic information from the repository.
If users can send us a well-written bug report which contains diagnostic
information we would otherwise need to ask the user for, we can reduce
the number of question-and-answer round trips between the reporter and
the Git contributor.
Users may also wish to send a report like this to their local "Git
expert" if they have put their repository into a state they are confused
by.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
|
|
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The guide "gitsubmodules" was added in d480345 (submodules: overhaul
documentation, 2017-06-22), but it was not added to
command-list.txt when commit 1b81d8c (help: use command-list.txt
for the source of guides, 2018-05-20) taught "git help" to obtain the
guide list from this file.
Add it now, and capitalize the first word of the description of
gitsubmodules, as was done in 1b81d8c (help: use command-list.txt
for the source of guides, 2018-05-20) for the other guides.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The third column in command-list.txt determines what group a common
command is printed in 'git help'.
"git reset" is currently in the "work on the current change (see also:
git help everyday)" group. While it's true that "git reset" can
manipulate the index and can be in this group, its unique
functionality is resetting HEAD, which should be the "grow, mark,
tweak history" group.
Moving it there will also avoid the confusion because both 'restore'
and 'reset' are in the same group, next to each other.
While looking at the 'group, mark, tweak history', I realize "git
diff" should not be there. All the commands in this group is about
_changing_ the commit history while "git diff" is a read-only
operation. It fits better in the "examine the history and state" group
(especially when "git status", its close friend, is already there).
This is what we have after the reorganization:
work on the current change (see also: git help everyday)
add Add file contents to the index
mv Move or rename a file, a directory, or a symlink
restore Restore working tree files
rm Remove files from the working tree and from the index
examine the history and state (see also: git help revisions)
bisect Use binary search to find the commit that introduced a bug
diff Show changes between commits, commit and working tree, etc
grep Print lines matching a pattern
log Show commit logs
show Show various types of objects
status Show the working tree status
grow, mark and tweak your common history
branch List, create, or delete branches
commit Record changes to the repository
merge Join two or more development histories together
rebase Reapply commits on top of another base tip
reset Reset current HEAD to the specified state
switch Switch branches
tag Create, list, delete or verify a tag object signed with GPG
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update to mark "git cherry" as a plumbing command.
* du/cherry-is-plumbing:
doc: move git-cherry to plumbing
|
|
Doc update to mark "git get-tar-commit-id" as a plumbing command.
* du/get-tar-commit-id-is-plumbing:
doc: move git-get-tar-commit-id to plumbing
|
|
Doc update.
* du/rev-parse-is-plumbing:
doc: move git-rev-parse from porcelain to plumbing
|
|
Also remove git-cherry from Bash completion because plumbing
commands do not belong there.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is definitely a low-level command, it's hard to argue
against it belonging in plumbing.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-rev-parse mostly seems like plumbing, and is more usd in
scripts than in regular use. Online it's often mentioned as
a plumbing command. Nonetheless it's listed under porcelain
interrogators in `man git`. It seems appropriate to formally
move git-rev-parse to plumbing interrogators.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
|
|
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d739159 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new 'git multi-pack-index' builtin will be the plumbing access
for writing, reading, and checking multi-pack-index files. The
initial implementation is a no-op.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
|
|
The following commands are removed from the complete list:
- annotate obsolete, discouraged to use
- filter-branch not often used
- get-tar-commit-id not often used
- imap-send not often used
- interpreter-trailers not for interactive use
- name-rev plumbing, just use git-describe
- p4 too short and probably not often used (*)
- svn same category as p4 (*)
- verify-commit not often used
(*) to be fair, send-email command which is in the same foreignscminterface
group as svn and p4 does get completion, just because it's used by git
and kernel development. So maybe we should include them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of maintaining a separate list of command classification,
which often could go out of date, let's centralize the information
back in git.
While the function in git-completion.bash implies "list porcelain
commands", that's not exactly what it does. It gets all commands (aka
--list-cmds=main,others) then exclude certain non-porcelain ones. We
could almost recreate this list two lists list-mainporcelain and
others. The non-porcelain-but-included-anyway is added by the third
category list-complete.
Note that the current completion script incorrectly classifies
filter-branch as porcelain and t9902 tests this behavior. We keep it
this way in t9902 because this test does not really care which
particular command is porcelain or plumbing, they're just names.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is intended to help anybody who needs to update command-list.txt.
It gives a brief introduction of all attributes a command can take.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The help command currently hard codes the list of guides and their
summary in C. Let's move this list to command-list.txt. This lets us
extract summary lines from Documentation/git*.txt. This also
potentially lets us list guides in git.txt, but I'll leave that for
now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit added code generation for all_cmd_desc[] which
includes almost everything we need to generate common command list.
Convert help code to use that array instead and drop common_cmds[] array.
The description of each common command group is removed from
command-list.txt. This keeps this file format simpler. common-cmds.h
will not be generated correctly after this change due to the
command-list.txt format change. But it does not matter and
common-cmds.h will be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current generate-cmds.sh generates just enough to print "git help"
output. That is, it only extracts help text for common commands.
The script is now updated to extract help text for all commands and
keep command classification a new file, command-list.h. This will be
useful later:
- "git help -a" could print a short summary of all commands instead of
just the common ones.
- "git" could produce a list of commands of one or more category. One
of its use is to reduce another command classification embedded in
git-completion.bash.
The new file can be generated but is not used anywhere yet. The plan
is we migrate away from common-cmds.h. Then we can kill off
common-cmds.h build rules and generation code (and also delete
duplicate content in command-list.h which we keep for now to not mess
generate-cmds.sh up too much).
PS. The new fixed column requirement on command-list.txt is
technically not needed. But it helps simplify the code a bit at this
stage. We could lift this restriction later if we want to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git the 'commit-graph' builtin that will be used for writing and
reading packed graph files. The current implementation is mostly
empty, except for an '--object-dir' option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in the olden days, when all objects were loose and rubber boots were
made out of wood, it made sense to try to share (immutable) objects
between repositories.
Ever since the arrival of pack files, it is but an anachronism.
Let's move the script to the contrib/examples/ directory and no longer
offer it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
|
|
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
command-list.sh, retired in the previous patch, was the only
consumer of the "common" tag, so drop this now-unnecessary
attribute.
before:
git-add mainporcelain common worktree
after:
git-add mainporcelain worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ultimate goal is for "git help" to display common commands in
groups rather than alphabetically. As a first step, define the
groups in a new block, and then assign a group to each
common command.
Add a block at the beginning of command-list.txt:
init start a working area (see also: git help tutorial)
worktree work on the current change (see also:[...]
info examine the history and state (see also: git [...]
history grow, mark and tweak your history
remote collaborate (see also: git help workflows)
storing information about common commands group, then map each common
command to a group:
git-add mainporcelain common worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Emma Jane Hogbin Westby <emma.westby@gmail.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ultimate goal is for "git help" to classify common commands by
group. Toward this end, a subsequent patch will add a new "common
groups" section to command-list.txt preceding the actual command list.
As preparation, teach existing command-list.txt parsing machinery, which
doesn't care about grouping, to skip over this upcoming "common groups"
section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The overwhelming majority of lines were single space aligned,
except a few ones aligned by tabs. Fix inconsistency by using
single space everywhere.
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at it add git-interpret-trailers to "command-list.txt".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This has been deprecated since commit 87194d2 (Deprecate peek-remote,
2007-11-24), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate
git-lost-found, 2007-11-08), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git tar-tree" has been a thin wrapper around "git archive" since commit
fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to
git-archive, 2006-09-24), which also made it print a message indicating
that git-tar-tree is deprecated.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The release notes for Git 1.5.4 say that "git repo-config" will be
removed in the next feature release. Since Git 2.0 is nearly here,
remove it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
SZEDER Gábor
Junio C Hamano
Derrick Stolee
Philippe Blain
John Lin
Emily Shaffer
Nguyễn Thái Ngọc Duy
Daniels Umanovskis
Johannes Schindelin
Derrick Stolee
Sébastien Guimmara
Eric Sunshine
Christian Couder
Michael J Gruber
John Keeping