summaryrefslogtreecommitdiff
path: root/combine-diff.c
AgeCommit message (Collapse)AuthorFilesLines
2012-04-26Merge branch 'rs/combine-diff-zero-context-at-the-beginning' into maintLibravatar Junio C Hamano1-1/+1
An age-old corner case bug in combine diff (only triggered with -U0 and the hunk at the beginning of the file needs to be shown) has been fixed. By René Scharfe * rs/combine-diff-zero-context-at-the-beginning: combine-diff: fix loop index underflow
2012-03-25combine-diff: fix loop index underflowLibravatar René Scharfe1-1/+1
If both la and context are zero at the start of the loop, la wraps around and we end up reading from memory far away. Skip the loop in that case instead. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-17pass struct commit to diff_tree_combined_merge()Libravatar René Scharfe1-4/+3
Instead of passing the hash of a commit and then searching that same commit in the single caller, simply pass the commit directly. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-17use struct sha1_array in diff_tree_combined()Libravatar René Scharfe1-21/+13
Maintaining an array of hashes is easier using sha1_array than open-coding it. This patch also fixes a leak of the SHA1 array in diff_tree_combined_merge(). Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'jk/color-and-pager'Libravatar Junio C Hamano1-4/+3
* jk/color-and-pager: want_color: automatically fallback to color.ui diff: don't load color config in plumbing config: refactor get_colorbool function color: delay auto-color decision until point of use git_config_colorbool: refactor stdout_is_tty handling diff: refactor COLOR_DIFF from a flag into an int setup_pager: set GIT_PAGER_IN_USE t7006: use test_config helpers test-lib: add helper functions for config t7006: modernize calls to unset Conflicts: builtin/commit.c parse-options.c
2011-08-28Merge branch 'jc/combine-diff-callback'Libravatar Junio C Hamano1-0/+69
* jc/combine-diff-callback: combine-diff: support format_callback
2011-08-20combine-diff: support format_callbackLibravatar Junio C Hamano1-0/+69
This teaches combine-diff machinery to feed a combined merge to a callback function when DIFF_FORMAT_CALLBACK is specified. So far, format callback functions are not used for anything but 2-way diffs. A callback is given a diff_queue_struct, which is an array of diff_filepair. As its name suggests, a diff_filepair is a _pair_ of diff_filespec that represents a single preimage and a single postimage. Since "diff -c" is to compare N parents with a single merge result and filter out any paths whose result match one (or more) of the parent(s), its output has to be able to represent N preimages and 1 postimage. For this reason, a callback function that inspects a diff_filepair that results from this new infrastructure can and is expected to view the preimage side (i.e. pair->one) as an array of diff_filespec. Each element in the array, except for the last one, is marked with "has_more_entries" bit, so that the same callback function can be used for 2-way diffs and combined diffs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18diff: refactor COLOR_DIFF from a flag into an intLibravatar Jeff King1-4/+3
This lets us store more than just a bit flag for whether we want color; we can also store whether we want automatic colors. This can be useful for making the automatic-color decision closer to the point of use. This mostly just involves replacing DIFF_OPT_* calls with manipulations of the flag. The biggest exception is that calls to DIFF_OPT_TST must check for "o->use_color > 0", which lets an "unknown" value (i.e., the default) stay at "no color". In the previous code, a value of "-1" was not propagated at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-17Merge branch 'jc/maint-combined-diff-work-tree'Libravatar Junio C Hamano1-4/+10
* jc/maint-combined-diff-work-tree: diff -c/--cc: do not mistake "resolved as deletion" as "use working tree" Conflicts: combine-diff.c
2011-08-04diff -c/--cc: do not mistake "resolved as deletion" as "use working tree"Libravatar Junio C Hamano1-4/+10
The combined diff machinery can be used to compare: - a merge commit with its parent commits; - a working-tree file with multiple stages in an unmerged index; or - a working-tree file with the HEAD and the index. The internal function combine-diff.c:show_patch_diff() checked if it needs to read the "result" from the working tree by looking at the object name of the result --- if it is null_sha1, it read from the working tree. This mistook a merge that records a deletion as the conflict resolution as if it is a cue to read from the working tree. Pass this information explicitly from the caller instead. Noticed and reported by Johan Herland. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-24combine-diff: respect textconv attributesLibravatar Jeff King1-9/+32
When doing a combined diff, we did not respect textconv attributes at all. This generally lead to us printing "Binary files differ" when we could show a combined diff of the converted text. This patch converts file contents according to textconv attributes. The implementation is slightly ugly; because the textconv code is tightly linked with the diff_filespec code, we temporarily create a diff_filespec during conversion. In practice, though, this should not create a performance problem. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-23combine-diff: handle binary files as binaryLibravatar Jeff King1-2/+35
The combined diff code path is totally different from the regular diff code path, and didn't handle binary files at all. The results of a combined diff on a binary file could range from annoying (since we spewed binary garbage, possibly upsetting the user's terminal), to wrong (embedded NULs caused us to show incorrect diffs, with lines truncated at the NUL character), to potential security problems (embedded NULs could interfere with "-z" output, possibly defeating policy hooks which parse diff output). Instead, we consider a combined diff to be binary if any of the input blobs is binary. To show a binary combined diff, we indicate "Binary blobs differ"; the "index" meta line will show which parents had which blob. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-23combine-diff: calculate mode_differs earlierLibravatar Jeff King1-2/+7
One loop combined both the patch generation and checking whether there was any mode change to report. Let's factor that into two separate loops, as we may care about the mode change even if we are not generating patches (e.g., because we are showing a binary diff, which will come in a future patch). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-23combine-diff: split header printing into its own functionLibravatar Jeff King1-61/+74
This is a pretty big logical chunk, so it makes the function a bit more readable to have it split out. In addition, it will make it easier to add an alternate code path for binary diffs in a future patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'rs/diff-no-minimal' into maintLibravatar Junio C Hamano1-1/+1
* rs/diff-no-minimal: git diff too slow for a file
2010-06-13Merge branch 'rs/diff-no-minimal'Libravatar Junio C Hamano1-1/+1
* rs/diff-no-minimal: git diff too slow for a file
2010-05-04remove ecb parameter from xdi_diff_outf()Libravatar René Scharfe1-2/+1
xdi_diff_outf() overrides the structure members of its last parameter, ignoring any value that callers pass in. It's no surprise then that all callers pass a pointer to an uninitialized structure. They also don't read it after the call, so the parameter is neither used for input nor for output. Turn it into a local variable of xdi_diff_outf(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-02git diff too slow for a fileLibravatar René Scharfe1-1/+1
Ever since the xdiff library had been introduced to git, all its callers have used the flag XDF_NEED_MINIMAL. It makes sure that the smallest possible diff is produced, but that takes quite some time if there are lots of differences that can be expressed in multiple ways. This flag makes a difference for only 0.1% of the non-merge commits in the git repo of Linux, both in terms of diff size and execution time. The patches there are mostly nice and small. SungHyun Nam however reported a case in a different repo where a diff took more than 20 times longer to generate with XDF_NEED_MINIMAL than without. Rebasing became really slow. This patch removes this flag from all callers. The default of xdiff is saner because it has minimal to no impact in the normal case of small diffs and doesn't incur that much of a speed penalty for large ones. A follow-up patch may introduce a command line option to set the flag if the user needs it, similar to GNU diff's -d/--minimal. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-17combined diff: correctly handle truncated fileLibravatar Thomas Rast1-6/+8
Consider an evil merge of two commits A and B, both of which have a file 'foo', but the merge result does not have that file. The combined-diff code learned in 4462731 (combine-diff: do not punt on removed or added files., 2006-02-06) to concisely show only the removal, since that is the evil part and the previous contents are presumably uninteresting. However, to diagnose an empty merge result, it overloaded the variable that holds the file's length. This means that the check also triggers for truncated files. Consequently, such files were not shown in the diff at all despite the merge being clearly evil. Fix this by adding a new variable that distinguishes whether the file was deleted (which is the case 4462731 handled) or truncated. In the truncated case, we show the full combined diff again, which is rather spammy but at least does not hide the evilness. Reported-by: David Martínez Martí <desarrollo@gestiweb.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-28Give the hunk comment its own colorLibravatar Bert Wesarg1-1/+4
Inspired by the coloring of quilt. Introduce a separate color and paint the hunk comment part, i.e. the name of the function, in a separate color "diff.func" (defaults to plain). Whitespace between hunk header and hunk comment is printed in plain color. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-22Merge branch 'maint'Libravatar Junio C Hamano1-15/+14
* maint: Trailing whitespace and no newline fix diff --cc: a lost line at the beginning of the file is shown incorrectly combine-diff.c: fix performance problem when folding common deleted lines
2009-07-22diff --cc: a lost line at the beginning of the file is shown incorrectlyLibravatar Junio C Hamano1-7/+9
When combine-diff inspected the diff from one parent to the merge result, it misinterpreted a header in the form @@ -l,k +0,0 @@. This hunk header means that K lines were removed from the beginning of the file, so the lost lines must be queued to the sline that represents the first line of the merge result, but we incremented our pointer incorrectly and ended up queuing it to the second line, which in turn made the lossage appear _after_ the first line. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-22combine-diff.c: fix performance problem when folding common deleted linesLibravatar Junio C Hamano1-8/+5
For a deleted line in a patch with the parent we are looking at, the append_lost() function finds the same line among a run of lines that were deleted from the same location by patches from parents we previously checked. This is so that patches with two parents @@ -1,4 +1,3 @@ @@ -1,4 +1,3 @@ one one -two -two three three -quatro -fyra +four +four can be coalesced into this sequence, reusing one line that describes the removal of "two" for both parents. @@@ -1,4 -1,4 +1,3 @@@ one --two three - quatro -frya ++four While reading the second patch (that removes "two" and then "fyra"), after finding where removal of the "two" matches, we need to find existing removal of "fyra" (if exists) in the removal list, but the match has to happen after all the existing matches (in this case "two"). The code used a naïve O(n^2) algorithm to compute this by scanning the whole removal list over and over again. This patch remembers where the next scan should be started in the existing removal list to avoid this. Noticed by Linus Torvalds. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Use die_errno() instead of die() when checking syscallsLibravatar Thomas Rast1-1/+1
Lots of die() calls did not actually report the kind of error, which can leave the user confused as to the real problem. Use die_errno() where we check a system/library call that sets errno on failure, or one of the following that wrap such calls: Function Passes on error from -------- -------------------- odb_pack_keep open read_ancestry fopen read_in_full xread strbuf_read xread strbuf_read_file open or strbuf_read_file strbuf_readlink readlink write_in_full xwrite Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-01Fix a bunch of pointer declarations (codestyle)Libravatar Felipe Contreras1-2/+2
Essentially; s/type* /type */ as per the coding guidelines. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-29Merge branch 'maint'Libravatar Junio C Hamano1-9/+25
* maint: diff -c -p: do not die on submodules Conflicts: combine-diff.c
2009-04-29Merge branch 'maint-1.6.0' into maint-1.6.1Libravatar Junio C Hamano1-12/+26
* maint-1.6.0: diff -c -p: do not die on submodules
2009-04-29diff -c -p: do not die on submodulesLibravatar Junio C Hamano1-12/+26
The combine diff logic knew only about blobs (and their checked-out form in the work tree, either regular files or symlinks), and barfed when fed submodules. This "externalizes" gitlinks in the same way as the normal patch generation codepath does (i.e. "Subproject commit Xxx\n") to fix the issue. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-17Merge branch 'kb/checkout-optim'Libravatar Junio C Hamano1-3/+1
* kb/checkout-optim: Revert "lstat_cache(): print a warning if doing ping-pong between cache types" checkout bugfix: use stat.mtime instead of stat.ctime in two places Makefile: Set compiler switch for USE_NSEC Create USE_ST_TIMESPEC and turn it on for Darwin Not all systems use st_[cm]tim field for ns resolution file timestamp Record ns-timestamps if possible, but do not use it without USE_NSEC write_index(): update index_state->timestamp after flushing to disk verify_uptodate(): add ce_uptodate(ce) test make USE_NSEC work as expected fix compile error when USE_NSEC is defined check_updates(): effective removal of cache entries marked CE_REMOVE lstat_cache(): print a warning if doing ping-pong between cache types show_patch_diff(): remove a call to fstat() write_entry(): use fstat() instead of lstat() when file is open write_entry(): cleanup of some duplicated code create_directories(): remove some memcpy() and strchr() calls unlink_entry(): introduce schedule_dir_for_removal() lstat_cache(): swap func(length, string) into func(string, length) lstat_cache(): generalise longest_match_lstat_cache() lstat_cache(): small cleanup and optimisation
2009-03-07Move local variables to narrower scopesLibravatar Benjamin Kramer1-2/+1
These weren't used outside and can be safely moved Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09show_patch_diff(): remove a call to fstat()Libravatar Kjetil Barvik1-3/+1
Currently inside show_patch_diff() we have an fstat() call after an ok lstat() call. Since before the call to fstat() we have already tested for the link case with S_ISLNK(), the fstat() can be removed. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-17combine-diff.c: use strbuf_readlink()Libravatar Junio C Hamano1-5/+5
When showing combined diff using work tree contents, use strbuf_readlink() to read symbolic links. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-25Always initialize xpparam_t to 0Libravatar Brian Downing1-0/+1
We're going to be adding some parameters to this, so we can't have any uninitialized data in it. Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-12Replace calls to strbuf_init(&foo, 0) with STRBUF_INIT initializerLibravatar Brandon Casey1-2/+1
Many call sites use strbuf_init(&foo, 0) to initialize local strbuf variable "foo" which has not been accessed since its declaration. These can be replaced with a static initialization using the STRBUF_INIT macro which is just as readable, saves a function call, and takes up fewer lines. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-18Merge branch 'jc/diff-prefix'Libravatar Junio C Hamano1-2/+6
* jc/diff-prefix: diff: vary default prefix depending on what are compared
2008-09-07Merge branch 'jc/hide-cr-in-diff-from-less'Libravatar Junio C Hamano1-2/+14
* jc/hide-cr-in-diff-from-less: diff: Help "less" hide ^M from the output
2008-08-30diff: vary default prefix depending on what are comparedLibravatar Junio C Hamano1-2/+6
With a new configuration "diff.mnemonicprefix", "git diff" shows the differences between various combinations of preimage and postimage trees with prefixes different from the standard "a/" and "b/". Hopefully this will make the distinction stand out for some people. "git diff" compares the (i)ndex and the (w)ork tree; "git diff HEAD" compares a (c)ommit and the (w)ork tree; "git diff --cached" compares a (c)ommit and the (i)ndex; "git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity; "git diff --no-index a b" compares two non-git things (1) and (2). Because these mnemonics now have meanings, they are swapped when reverse diff is in effect and this feature is enabled. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-30diff: Help "less" hide ^M from the outputLibravatar Junio C Hamano1-2/+14
When the tracked contents have CRLF line endings, colored diff output shows "^M" at the end of output lines, which is distracting, even though the pager we use by default ("less") knows to hide them. The problem is that "less" hides a carriage-return only at the end of the line, immediately before a line feed. The colored diff output does not take this into account, and emits four element sequence for each line: - force this color; - the line up to but not including the terminating line feed; - reset color - line feed. By including the carriage return at the end of the line in the second item, we are breaking the smart our pager has in order not to show "^M". This can be fixed by changing the sequence to: - force this color; - the line up to but not including the terminating end-of-line; - reset color - end-of-line. where end-of-line is either a single linefeed or a CRLF pair. When the output is not colored, "force this color" and "reset color" sequences are both empty, so we won't have this problem with or without this patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-24Merge branch 'maint' to sync with 1.6.0.1Libravatar Junio C Hamano1-0/+12
2008-08-23Respect core.autocrlf in combined diffLibravatar Alexander Gavrilov1-0/+12
Fix git-diff to make it produce useful 3-way diffs for merge conflicts in repositories with autocrlf enabled. Otherwise it always reports that the whole file was changed, because it uses the contents from the working tree without necessary conversion. Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14xdiff-interface: hide the whole "xdiff_emit_state" business from the callerLibravatar Junio C Hamano1-5/+2
This further enhances xdi_diff_outf() interface so that it takes two common parameters: the callback function that processes one line at a time, and a pointer to its application specific callback data structure. xdi_diff_outf() creates its own "xdiff_emit_state" structure and stashes these two away inside it, which is used by the lowest level output function in the xdiff_outf() callchain, consume_one(), to call back to the application layer. With this restructuring, we lift the requirement that the caller supplied callback data structure embeds xdiff_emit_state structure as its first member. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-13Make xdi_diff_outf interface for running xdiff_outf diffsLibravatar Brian Downing1-3/+2
To prepare for the need to initialize and release resources for an xdi_diff with the xdiff_outf output function, make a new function to wrap this usage. Old: ecb.outf = xdiff_outf; ecb.priv = &state; ... xdi_diff(file_p, file_o, &xpp, &xecfg, &ecb); New: xdi_diff_outf(file_p, file_o, &state.xm, &xpp, &xecfg, &ecb); Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22Merge branch 'jc/maint-combine-diff-pre-context'Libravatar Junio C Hamano1-2/+5
* jc/maint-combine-diff-pre-context: diff -c/--cc: do not include uninteresting deletion before leading context
2008-06-18diff -c/--cc: do not include uninteresting deletion before leading contextLibravatar Junio C Hamano1-2/+5
When we include a few uninteresting lines before the interesting ones as context, we are only interested in seeing the surviving lines themselves and not the deleted lines that are before them. Mark the added leading context lines in give_context() and not show deleted lines form them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-03Cleanup xread() loops to use read_in_full()Libravatar Heikki Orsila1-9/+8
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-03Remove dead code: show_log() sep argument and diff_options.msg_sepLibravatar Adam Simpkins1-3/+3
These variables were made unnecessary by commit 3969cf7db1a13a78f3b7a36d8c1084bbe0a53459. Signed-off-by: Adam Simpkins <adam@adamsimpkins.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-27Die for an early EOF in a file reading loopLibravatar Heikki Orsila1-3/+3
The resulting data is zero terminated after the read loop, but the subsequent loop that scans for '\n' will overrun the buffer. Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-26Fix rewrite_diff() name quoting.Libravatar Junio C Hamano1-10/+1
This moves the logic to quote two paths (prefix + path) in C-style introduced in the previous commit from the dump_quoted_path() in combine-diff.c to quote.c, and uses it to fix rewrite_diff() that never C-quoted the pathnames correctly. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-26combine-diff: Fix path quotingLibravatar Junio C Hamano1-10/+31
Earlier when showing combined diff, the filenames on the ---/+++ header lines were quoted incorrectly. a/ (or b/) prefix was output literally and then the path was output, with c-quoting. This fixes the quoting logic, and while at it, adjusts the code to use the customizable prefix (a_prefix and b_prefix) introduced recently. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-13xdl_diff: identify call sites.Libravatar Junio C Hamano1-1/+1
This inserts a new function xdi_diff() that currently does not do anything other than calling the underlying xdl_diff() to the callchain of current callers of xdl_diff() function. Signed-off-by: Junio C Hamano <gitster@pobox.com>