| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It *is* a confusing thing to look at a diff of diffs. All too easy is it
to mix up whether the -/+ markers refer to the "inner" or the "outer"
diff, i.e. whether a `+` indicates that a line was added by either the
old or the new diff (or both), or whether the new diff does something
different than the old diff.
To make things easier to process for normal developers, we introduced
the dual color mode which colors the lines according to the commit diff,
i.e. lines that are added by a commit (whether old, new, or both) are
colored in green. In non-dual color mode, the lines would be colored
according to the outer diff: if the old commit added a line, it would be
colored red (because that line addition is only present in the first
commit range that was specified on the command-line, i.e. the "old"
commit, but not in the second commit range, i.e. the "new" commit).
However, this dual color mode is still not making things clear enough,
as we are looking at two levels of diffs, and we still only pick a color
according to *one* of them (the outer diff marker is colored
differently, of course, but in particular with deep indentation, it is
easy to lose track of that outer diff marker's background color).
Therefore, let's add another dimension to the mix. Still use
green/red/normal according to the commit diffs, but now also dim the
lines that were only in the old commit, and use bold face for the lines
that are only in the new commit.
That way, it is much easier not to lose track of, say, when we are
looking at a line that was added in the previous iteration of a patch
series but the new iteration adds a slightly different version: the
obsolete change will be dimmed, the current version of the patch will be
bold.
At least this developer has a much easier time reading the range-diffs
that way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This "color" simply reverts background and foreground. It will be used
in the upcoming "dual color" mode of `git range-diff`, where we will
reverse colors for the -/+ markers and the fragment headers of the
"outer" diff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far, we only ever asked whether stdout wants to be colorful. In the
upcoming patches, we will want to make push errors more prominent, which
are printed to stderr, though.
So let's refactor the want_color() function into a want_color_fd()
function (which expects to be called with fd == 1 or fd == 2 for stdout
and stderr, respectively), and then define the macro `want_color()` to
use the want_color_fd() function.
And then also add a macro `want_color_stderr()`, for convenience and
for documentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add documentation explaining the functions in color.h.
While at it, migrate the function `color_set` into grep.c,
where the only callers are.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any lines inside a moved block of code are not interesting. Boundaries
of blocks are only interesting if they are next to another block of moved
code.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For a long time, we carried an in-code comment that said our
colored output would work only when we use fprintf/fputs on
Windows, which no longer is the case for the past few years.
* js/color-on-windows-comment:
color.h: remove obsolete comment about limitations on Windows
|
|
The output coloring scheme learned two new attributes, italic and
strike, in addition to existing bold, reverse, etc.
* jk/ansi-color:
color: support strike-through attribute
color: support "italic" attribute
color: allow "no-" for negating attributes
color: refactor parse_attr
add skip_prefix_mem helper
doc: refactor description of color format
color: fix max-size comment
|
|
Originally, ANSI color sequences were supported on Windows only by
overriding the printf() and fprintf() functions, as mentioned in e7821d7
(Add a notice that only certain functions can print color escape codes,
2009-11-27).
As of eac14f8 (Win32: Thread-safe windows console output, 2012-01-14),
however, this is no longer the case, as the ANSI color sequence support
code needed to be replaced with a thread-safe version, one side effect
being that stdout and stderr handled no matter which function is used to
write to it.
So let's just remove the comment that is now obsolete.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the only remaining attribute that is commonly
supported (at least by xterm) that we don't support. Let's
add it for completeness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support bold, underline, and similar attributes.
Let's add italic to the mix. According to the Wikipedia
page on ANSI colors, this attribute is "not widely
supported", but it does seem to work on my xterm.
We don't have to bump the maximum color size because we were
already over-allocating it (but we do adjust the comment
appropriately).
Requested-by: Simon Courtois <scourtois@cubyx.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use fixed-size buffers for colors, because we know our
parsing cannot grow beyond a particular bound. However, our
comment description has two issues:
1. It has the description in two forms: a short one, and
one with more explanation. Over time the latter has
been updated, but the former has not. Let's just drop
the short one (after making sure everything it says
is in the long one).
2. As of ff40d18 (parse_color: recognize "no$foo" to clear
the $foo attribute, 2014-11-20), the per-attribute size
bumped to "3" (because "nobold" is actually "21;"). But
that's not quite enough, as somebody may use both
"bold" and "nobold", requiring 5 characters.
This wasn't a problem for the final count, because we
over-estimated in other ways, but let's clarify how we
got to the final number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To set up default colors, we sometimes strcpy() from the
default string literals into our color buffers. This isn't a
bug (assuming the destination is COLOR_MAXLEN bytes), but
makes it harder to audit the code for problematic strcpy
calls.
Let's introduce a color_set which copies under the
assumption that there are COLOR_MAXLEN bytes in the
destination (of course you can call it on a smaller buffer,
so this isn't providing a huge amount of safety, but it's
more convenient than calling xsnprintf yourself).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You can turn on ANSI text attributes like "reverse" by
putting "reverse" in your color spec. However, you cannot
ask to turn reverse off.
For common cases, this does not matter. You would turn on
"reverse" at the start of a colored section, and then clear
all attributes with a "reset". However, you may wish to turn
on some attributes, then selectively disable others. For
example:
git log --format="%C(bold ul yellow)%h%C(noul) %s"
underlines just the hash, but without the need to re-specify
the rest of the attributes. This can also help third-party
programs, like contrib/diff-highlight, that want to turn
some attribute on/off without disrupting existing coloring.
Note that some attribute specifications are probably
nonsensical (e.g., "bold nobold"). We do not bother to flag
such constructs, and instead let the terminal sort it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some terminals (like XTerm) allow full 24-bit RGB color
specifications using an extension to the regular ANSI color
scheme. Let's allow users to specify hex RGB colors,
enabling the all-important feature of hot pink ref
decorations:
git log --format="%h%C(#ff69b4)%d%C(reset) %s"
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the "do we want color" flags default to -1 to
indicate that we don't have any color configured. This value
is handled in one of two ways:
1. In porcelain, we check early on whether the value is
still -1 after reading the config, and set it to the
value of color.ui (which defaults to 0).
2. In plumbing, it stays untouched as -1, and want_color
defaults it to off.
This works fine, but means that every porcelain has to check
and reassign its color flag. Now that want_color gives us a
place to put this check in a single spot, we can do that,
simplifying the calling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff config callback is split into two functions: one
which loads "ui" config, and one which loads "basic" config.
The former chains to the latter, as the diff UI config is a
superset of the plumbing config.
The color.diff variable is only loaded in the UI config.
However, the basic config actually chains to
git_color_default_config, which loads color.ui. This doesn't
actually cause any bugs, because the plumbing diff code does
not actually look at the value of color.ui.
However, it is somewhat nonsensical, and it makes it
difficult to refactor the color code. It probably came about
because there is no git_color_config to load only color
config, but rather just git_color_default_config, which
loads color config and chains to git_default_config.
This patch splits out the color-specific portion of
git_color_default_config so that the diff UI config can call
it directly. This is perhaps better explained by the
chaining of callbacks. Before we had:
git_diff_ui_config
-> git_diff_basic_config
-> git_color_default_config
-> git_default_config
Now we have:
git_diff_ui_config
-> git_color_config
-> git_diff_basic_config
-> git_default_config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also adds the new colors to show-branch that were added a while
back for graph output.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce status_printf{,_ln,_more} wrapper functions around
color_vfprintf() which take care of adding "#" to the beginning of
status lines automatically. The semantics:
- status_printf() is just like color_fprintf() but it adds a "# "
at the beginning of each line of output;
- status_printf_ln() is a convenience function that additionally
adds "\n" at the end;
- status_printf_more() is a variant of status_printf() used to
continue lines that have already started. It suppresses the "#" at
the beginning of the first line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This gives it the same behavior as we had prior to 1d28232
(status: show branchname with a configurable color).
To do this we need the concept of a "NIL" color, which is
provided by color.[ch]. The implementation is very simple;
in particular, there are no precautions taken against code
accidentally printing the NIL. This should be fine in
practice because:
1. You can't input a NIL color in the config, so it must
come from the in-code defaults. Which means it is up
the client code to handle the NILs it defines.
2. If we do ever print a NIL, it will be obvious what the
problem is, and the bug can be fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ml/color-grep:
grep: Colorize selected, context, and function lines
grep: Colorize filename, line number, and separator
Add GIT_COLOR_BOLD_* and GIT_COLOR_BG_*
|
|
* jc/color-attrs:
color: allow multiple attributes
|
|
In configuration files (and "git config --color" command line), we
supported one and only one attribute after foreground and background
color. Accept combinations of attributes, e.g.
[diff.color]
old = red reverse bold
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add GIT_COLOR_BOLD_* macros to set both bold and the color in one
sequence. This saves two characters of output ("ESC [ m", minus ";")
and makes the code more readable.
Add the remaining GIT_COLOR_BG_* macros to make the list complete.
The white and black colors are not included since they look bad on most
terminals.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We emulate color escape codes on Windows by overriding printf, fprintf,
and fputs. Warn developers that these are the only functions that can be
used to print them.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have these checks in many printf-type functions that have
prototypes which are in header files. Add these same checks to some
more prototypes in header functions and to static functions in .c
files.
cc: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Modified the graph drawing logic to colorize edges based on parent-child
relationships similiarly to gitk.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the literal ANSI escape sequences and replace them by readable
constants.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
|
|
We have very featureful color-parsing routines which are
used for color.diff.* and other options. Let's make it
easier to use those routines from other parts of the code.
This patch adds a color_parse_mem() helper function which
takes a length-bounded string instead of a NUL-terminated
one. While the helper is only a few lines long, it is nice
to abstract this out so that:
- callers don't forget to free() the temporary buffer
- right now, it is implemented in terms of color_parse().
But it would be more efficient to reverse this and
implement color_parse in terms of color_parse_mem.
This also changes the error string for an invalid color not
to mention the word "config", since it is not always
appropriate (and when it is, the context is obvious since
the offending config variable is given).
Finally, while we are in the area, we clean up the parameter
names in the declaration of color_parse; the var and value
parameters were reversed from the actual implementation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have to set the color before every line and reset it before every
newline. Add a function color_fwrite_lines() which does that for us.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Kestenholz <mk@spinlock.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds an option to help scripts find out color settings from
the configuration file.
git config --get-colorbool color.diff
inspects color.diff variable, and exits with status 0 (i.e. success) if
color is to be used. It exits with status 1 otherwise.
If a script wants "true"/"false" answer to the standard output of the
command, it can pass an additional boolean parameter to its command
line, telling if its standard output is a terminal, like this:
git config --get-colorbool color.diff true
When called like this, the command outputs "true" to its standard output
if color is to be used (i.e. "color.diff" says "always", "auto", or
"true"), and "false" otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Still defaults to stdout, but you can now override wt_status.fp after
calling wt_status_prepare().
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The intent is to lib-ify colorizing code so it can be reused.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Johannes Schindelin
Stefan Beller
Junio C Hamano
Jeff King
Dan McGee
Jonathan Nieder
Thomas Rast
Mark Lodato
Johannes Sixt
Tarmigan Casebolt
Allan Caffee
Arjen Laarhoven
Matthias Kestenholz
Kristian Høgsberg