| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 'ci/test-documentation.sh' we save the standard error of 'make
doc', and, in an attempt to make sure that neither AsciiDoc nor
Asciidoctor printed any warnings, we check the emptiness of the
resulting file with '! test -s stderr.log'. This check has never
actually worked, because in our 'ci/*' build scripts we rely on 'set
-e' aborting the build job when a command exits with error, and,
unfortunately, the combination of the two doesn't work as intended.
According to POSIX [1]:
"The -e setting shall be ignored when executing [...] a pipeline
beginning with the ! reserved word" [2]
Watch and learn:
$ echo unexpected >file
$ ( set -e; ! test -s file ; echo "should not reach this" ) ; echo $?
should not reach this
0
This is why we haven't noticed the warnings from Asciidoctor that were
fixed in the first patches of this patch series, though some of them
were already there in the build of v2.18.0-rc0 [3].
Check the emptiness of that file with 'test ! -s' instead, which works
properly with 'set -e':
$ ( set -e; test ! -s file ; echo "should not reach this" ) ; echo $?
1
Furthermore, dump the contents of that file to the log for our
convenience, so if it were to unexpectedly end up being non-empty,
then we wouldn't have to scroll through all that long build log
looking for warnings, but could see them right away near the end of
the log.
Note that we are only really interested in the standard error of
AsciiDoc and Asciidoctor, but by saving the stderr of 'make doc' we
also save any error output from the make rules. Currently there is
only one such line: we build the docs with Asciidoctor right after a
'make clean', meaning that 'make USE_ASCIIDOCTOR=1 doc' always starts
with running 'GIT-VERSION-GEN', which in turn prints the version to
stderr. A 'sed' command was supposed to remove this version line to
prevent it from triggering that (previously defunct) emptiness check,
but, unfortunately, this command doesn't work as intended, either,
because it leaves the file to be checked intact, but that defunct
emptiness check hid this issue, too... Furthermore, in the near
future there will be an other line on stderr, because commit
9a71722b4d (Doc: auto-detect changed build flags, 2019-03-17) in the
currently cooking branch 'ma/doc-diff-doc-vs-doctor-comparison' will
print "* new asciidoc flags" at the beginning of both 'make doc'
invokations.
Extend that 'sed' command to remove this line, too, wrap it in a
helper function so the output of both 'make doc' is filtered the same
way, and change its invokation to actually write the logfile to be
checked.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#set
[2] POSIX doesn't discuss the meaning of '! cmd' in case of simple
commands, but it defines that "A pipeline is a sequence of one or
more commands separated by the control operator '|'", so
apparently a simple command is considered as pipeline as well.
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09_02
[3] https://travis-ci.org/git/git/jobs/385932007#L1463
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recent release of Asciidoctor v2.0.0 broke our documentation
build job on Travis CI, where we 'gem install asciidoctor', which
always brings us the latest and (supposedly) greatest. Alas, we are
not ready for that just yet, because it removed support for DocBook
4.5, and we have been requiring that particular DocBook version to
build 'user-manual.xml' with Asciidoctor, resulting in:
ASCIIDOC user-manual.xml
asciidoctor: FAILED: missing converter for backend 'docbook45'. Processing aborted.
Use --trace for backtrace
make[1]: *** [user-manual.xml] Error 1
Unfortunately, we can't simply switch to DocBook 5 right away, as
doing so leads to validation errors from 'xmlto', and working around
those leads to yet another errors... [1]
So let's stick with Asciidoctor v1.5.8 (latest stable release before
v2.0.0) in our documentation build job on Travis CI for now, until we
figure out how to deal with the fallout from Asciidoctor v2.0.0.
[1] https://public-inbox.org/git/20190324162131.GL4047@pobox.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When our '.travis.yml' was split into several 'ci/*' scripts [1], the
installation of the 'asciidoctor' gem somehow ended up in
'ci/test-documentation.sh'.
Install it in 'ci/install-dependencies.sh', where we install other
dependencies of the Documentation build job as well (asciidoc,
xmlto).
[1] 657343a602 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since Travis did not support Windows (and now only supports very limited
Windows jobs, too limited for our use, the test suite would time out
*all* the time), we added a hack where a Travis job would trigger an
Azure Pipeline (which back then was still called VSTS Build), wait for
it to finish (or time out), and download the log (if available).
Needless to say that it was a horrible hack, necessitated by a bad
situation.
Nowadays, however, we have Azure Pipelines support, and do not need that
hack anymore. So let's retire it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clearing it once upfront, and turning all the assignment into
appending, would future-proof the code even more, to prevent
mistakes the previous one fixed from happening again.
Also, mark the variable exported just once at the beginning. There
is no point in marking it exported repeatedly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 2c8921db2b (travis-ci: build with the right compiler,
2019-01-17) started to use MAKEFLAGS to specify which compiler to use
to build Git. A bit later, and in a different topic branch commit
eaa62291ff (ci: inherit --jobs via MAKEFLAGS in run-build-and-tests,
2019-01-27) started to use MAKEFLAGS as well. Unfortunately, there is
a semantic conflict between these two commits: both of them set
MAKEFLAGS, and since the line adding CC from 2c8921db2b comes later in
'ci/lib.sh', it overwrites the number of parallel jobs added in
eaa62291ff.
Consequently, since both commits have been merged all our CI jobs have
been building Git, building its documentation, and applying semantic
patches sequentially, making all build jobs a bit slower. Running
the test suite is unaffected, because the number of test jobs comes
from GIT_PROVE_OPTS.
Append to MAKEFLAGS when setting the compiler to use, to ensure that
the number of parallel jobs to use is preserved.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way the OSX build jobs updates its build environment used the
"--quiet" option to "brew update" command, but it wasn't all that
quiet to be useful. The use of the option has been replaced with
an explicit redirection to the /dev/null (which incidentally would
have worked around a breakage by recent updates to homebrew, which
has fixed itself already).
* sg/travis-osx-brew-breakage-workaround:
travis-ci: make the OSX build jobs' 'brew update' more quiet
|
|
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
|
|
Before installing the necessary dependencies, our OSX build jobs run
'brew update --quiet'. This is problematic for two reasons:
- This '--quiet' flag apparently broke overnight, resulting in
errored builds:
+brew update --quiet
==> Downloading https://homebrew.bintray.com/bottles-portable-ruby/portable-ruby-2.3.7.mavericks.bottle.tar.gz
######################################################################## 100.0%
==> Pouring portable-ruby-2.3.7.mavericks.bottle.tar.gz
Usage: brew update_report [--preinstall]
The Ruby implementation of brew update. Never called manually.
--preinstall Run in 'auto-update' mode (faster, less
output).
-f, --force Override warnings and enable potentially
unsafe operations.
-d, --debug Display any debugging information.
-v, --verbose Make some output more verbose.
-h, --help Show this message.
Error: invalid option: --quiet
The command "ci/install-dependencies.sh" failed and exited with 1 during .
I belive that this breakage will be noticed and fixed soon-ish, so
we could probably just wait a bit for this issue to solve itself,
but:
- 'brew update --quiet' wasn't really quiet in the first place, as
it listed over about 2000 lines worth of available packages that
we absolutely don't care about, see e.g. one of the latest
'master' builds:
https://travis-ci.org/git/git/jobs/486134962#L113
So drop this '--quiet' option and redirect 'brew update's standard
output to /dev/null to make it really quiet, thereby making the OSX
builds work again despite the above mentioned breakage.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fact that Git's test suite is implemented in Unix shell script that
is as portable as we can muster, combined with the fact that Unix shell
scripting is foreign to Windows (and therefore has to be emulated),
results in pretty abysmal speed of the test suite on that platform, for
pretty much no other reason than that language choice.
For comparison: while the Linux build & test is typically done within
about 8 minutes, the Windows build & test typically lasts about 80
minutes in Azure Pipelines.
To help with that, let's use the Azure Pipeline feature where you can
parallelize jobs, make jobs depend on each other, and pass artifacts
between them.
The tests are distributed using the following heuristic: listing all
test scripts ordered by size in descending order (as a cheap way to
estimate the overall run time), every Nth script is run (where N is the
total number of parallel jobs), starting at the index corresponding to
the parallel job. This slicing is performed by a new function that is
added to the `test-tool`.
To optimize the overall runtime of the entire Pipeline, we need to move
the Windows jobs to the beginning (otherwise there would be a very
decent chance for the Pipeline to be run only the Windows build, while
all the parallel Windows test jobs wait for this single one).
We use Azure Pipelines Artifacts for both the minimal Git for Windows
SDK as well as the built executables, as deduplication and caching close
to the agents makes that really fast. For comparison: while downloading
and unpacking the minimal Git for Windows SDK via PowerShell takes only
one minute (down from anywhere between 2.5 to 7 when using a shallow
clone), uploading it as Pipeline Artifact takes less than 30s and
downloading and unpacking less than 20s (sometimes even as little as
only twelve seconds).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As Unix shell scripting comes at a hefty price on Windows, we have to
see where we can save some time to run the test suite.
Let's skip the chain linting and the bin-wrappers/ redirection on
Windows; this seems to shave of anywhere between 10-30% from the overall
runtime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit adds an azure-pipelines.yml file which is Azure DevOps'
equivalent to Travis CI's .travis.yml.
The main idea is to replicate the Travis configuration as faithfully as
possible, to make it easy to compare the Azure Pipeline builds to the
Travis ones (spoiler: some parts, especially the macOS jobs, are way
faster in Azure Pileines). Meaning: the number and the order of the jobs
added in this commit faithfully replicates what we have in .travis.yml.
Note: Our .travis.yml configuration has a Windows part that is *not*
replicated in the Azure Pipelines definition. The reason is easy to see:
As Travis cannot support our Windws needs (even with the preliminary
Windows support that was recently added to Travis after waiting for
*years* for that feature, our test suite would simply hit Travis'
timeout every single time).
To make things a bit easier to understand, we refrain from using the
`matrix` feature here because (while it is powerful) it can be a bit
confusing to users who are not familiar with CI setups. Therefore, we
use a separate phase even for similar configurations (such as GCC vs
Clang on Linux, GCC vs Clang on macOS).
Also, we make use of the shiny new feature we just introduced where the
test suite can output JUnit-style .xml files. This information is made
available in a nice UI that allows the viewer to filter by phase and/or
test number, and to see trends such as: number of (failing) tests, time
spent running the test suite, etc. (While this seemingly contradicts the
intention to replicate the Travis configuration as faithfully as
possible, it is just too nice to show off that capability here already.)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a conditional arm that defines some environment
variables and a function that displays the URL given the job id (to
identify previous runs for known-good trees).
Because Azure Pipeline's macOS agents already have git-lfs and gettext
installed, we can leave `BREW_INSTALL_PACKAGES` empty (unlike in
Travis' case).
Note: this patch does not introduce an Azure Pipelines definition yet;
That is left for the next patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Symbolic links are still not quite as easy to use on Windows as on Linux
(for example, on versions older than Windows 10, only administrators can
create symlinks, and on Windows 10 you still need to be in developer
mode for regular users to have permission), but NTFS junctions can give
us a way out.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's not decide in the generic ci/ part how many jobs to run in
parallel; different CI configurations would favor a different number of
parallel jobs, and it is easy enough to hand that information down via
the `MAKEFLAGS` variable.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The upcoming patches will allow building git.git via Azure Pipelines
(i.e. Azure DevOps' Continuous Integration), where variable names and
URLs look a bit different than in Travis CI.
Also, the configurations of the available agents are different. For
example, Travis' and Azure Pipelines' macOS agents are set up
differently, so that on Travis, we have to install the git-lfs and
gettext Homebrew packages, and on Azure Pipelines we do not need to.
Likewise, Azure Pipelines' Ubuntu agents already have asciidoctor
installed.
Finally, on Azure Pipelines the natural way is not to base64-encode tar
files of the trash directories of failed tests, but to publish build
artifacts instead. Therefore, that code to log those base64-encoded tar
files is guarded to be Travis-specific.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name is hard-coded to reflect that we use Travis CI for continuous
testing.
In the next commits, we will extend this to be able use Azure DevOps,
too.
So let's adjust the name to make it more generic.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When building a PR, TRAVIS_BRANCH refers to the *target branch*.
Therefore, if a PR targets `master`, and `master` happened to be tagged,
we skipped the build by mistake.
Fix this by using TRAVIS_PULL_REQUEST_BRANCH (i.e. the *source branch*)
when available, falling back to TRAVIS_BRANCH (i.e. for CI builds, also
known as "push builds").
Let's give it a new variable name, too: CI_BRANCH (as it is different
from TRAVIS_BRANCH). This also prepares for the upcoming patches which
will make our ci/* code a bit more independent from Travis and open it
to other CI systems (in particular to Azure Pipelines).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our 'Makefile' hardcodes the compiler to build Git as 'CC = cc'. This
CC variable can be overridden from the command line, i.e. 'make
CC=gcc-X.Y' will build with that particular GCC version, but not from
the environment, i.e. 'CC=gcc-X.Y make' will still build with whatever
'cc' happens to be on the platform.
Our build jobs on Travis CI are badly affected by this. In the build
matrix we have dedicated build jobs to build Git with GCC and Clang
both on Linux and macOS from the very beginning (522354d70f (Add
Travis CI support, 2015-11-27)). Alas, this never really worked as
supposed to, because Travis CI specifies the compiler for those build
jobs as 'export CC=gcc' and 'export CC=clang' (which works fine for
projects built with './configure && make'). Consequently, our
'linux-clang' build job has always used GCC, because that's where 'cc'
points at in Travis CI's Linux images, while the 'osx-gcc' build job
has always used Clang. Furthermore, 37fa4b3c78 (travis-ci: run gcc-8
on linux-gcc jobs, 2018-05-19) added an 'export CC=gcc-8' in an
attempt to build with a more modern compiler, but to no avail.
Set MAKEFLAGS with CC based on the $CC environment variable, so 'make'
will run the "right" compiler. The Xcode 10.1 macOS image on Travis
CI already contains the gcc@8 package from Homebrew, but we have to
'brew link' it first to be able to use it.
So with this patch our build jobs will build Git with the following
compiler versions:
linux-clang: clang version 5.0.0 (tags/RELEASE_500/final)
linux-gcc: gcc-8 (Ubuntu 8.1.0-5ubuntu1~14.04) 8.1.0
osx-clang: Apple LLVM version 10.0.0 (clang-1000.11.45.5)
osx-gcc: gcc-8 (Homebrew GCC 8.2.0) 8.2.0
GETTEXT_POISON: gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All Travis CI build jobs run the test suite with 'make --quiet test'.
On one hand, being quiet doesn't save us from much clutter in the
output:
$ make test |wc -l
861
$ make --quiet test |wc -l
848
It only spares 13 lines, mostly the output of entering the 't/'
directory and the pre- and post-cleanup commands, which is negligible
compared to the ~700 lines printed while building Git and the ~850
lines of 'prove' output.
On the other hand, it's asking for trouble. In our CI build scripts
we build Git and run the test suite in two separate 'make'
invocations. In a prelimiary version of one of the later patches in
this series, to explicitly specify which compiler to use, I changed
them to basically run:
make CC=$CC
make --quiet test
naively thinking that it should Just Work... but then that 'make
--quiet test' got all clever on me, noticed the changed build flags,
and then proceeded to rebuild everything with the default 'cc'. And
because of that '--quiet' option, it did so, well, quietly, only
saying "* new build flags", and it was by mere luck that I happened to
notice that something is amiss.
Let's just drop that '--quiet' option when running the test suite in
all build scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
|
|
The procedure to install dependencies before testing at Travis CI
is getting revamped for both simplicity and flexibility, taking
advantage of the recent move to the vm-based environment.
* sg/travis-install-dependencies:
travis-ci: install packages in 'ci/install-dependencies.sh'
|
|
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since we started using Travis CI, we specified the list of
packages to install in '.travis.yml' via the APT addon. While running
our builds on Travis CI's container-based infrastructure we didn't
have another choice, because that environment didn't support 'sudo',
and thus we didn't have permission to install packages ourselves. With
the switch to the VM-based infrastructure in the previous patch we do
get a working 'sudo', so we can install packages by running 'sudo
apt-get -y install ...' as well.
Let's make use of this and install necessary packages in
'ci/install-dependencies.sh', so all the dependencies (i.e. both
packages and "non-packages" (P4 and Git-LFS)) are handled in the same
file. Install gcc-8 only in the 'linux-gcc' build job; so far it has
been unnecessarily installed in the 'linux-clang' build job as well.
Print the versions of P4 and Git-LFS conditionally, i.e. only when
they have been installed; with this change even the static analysis
and documentation build jobs start using 'ci/install-dependencies.sh'
to install packages, and neither of these two build jobs depend on and
thus install those.
This change will presumably be beneficial for the upcoming Azure
Pipelines integration [1]: preliminary versions of that patch series
run a couple of 'apt-get' commands to install the necessary packages
before running 'ci/install-dependencies.sh', but with this patch it
will be sufficient to run only 'ci/install-dependencies.sh'.
[1] https://public-inbox.org/git/1a22efe849d6da79f2c639c62a1483361a130238.1539598316.git.gitgitgadget@gmail.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph and multi-pack-index features introduce optional
data structures that are not required for normal Git operations.
It is important to run the normal test suite without them enabled,
but it is helpful to also run the test suite using them.
Our continuous integration scripts include a second test stage that
runs with optional GIT_TEST_* variables enabled. Add the following
two variables to that stage:
GIT_TEST_COMMIT_GRAPH
GIT_TEST_MULTI_PACK_INDEX
This will slow down the operation, as we build a commit-graph file
after every 'git commit' operation and build a multi-pack-index
during every 'git repack' operation. However, it is important that
future changes are compatible with these features.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a recent update in 2.18 era, "git pack-objects" started
producing a larger than necessary packfiles by missing
opportunities to use large deltas.
* nd/pack-deltify-regression-fix:
pack-objects: fix performance issues on packing large deltas
|
|
The Travis CI scripts were taught to ship back the test data from
failed tests.
* sg/travis-retrieve-trash-upon-failure:
travis-ci: include the trash directories of failed tests in the trace log
|
|
The trash directory of a failed test might contain invaluable
information about the cause of the failure, but we have no access to
the trash directories of Travis CI build jobs. The only feedback we
get from there is the build job's trace log, so...
Modify 'ci/print-test-failures.sh' to create a tar.gz archive of the
trash directory of each failed test, encode that archive with base64,
and print the resulting block of ASCII text, so it gets embedded in
the trace log. Furthermore, run tests with '--immediate' to
faithfully preserve the failed state.
Extracting the trash directories from the trace log turned out to be a
bit of a hassle, partly because of the size of these logs (usually
resulting in several hundreds or even thousands of lines of
base64-encoded text), and partly because these logs have CRLF, CRCRLF
and occasionally even CRCRCRLF line endings, which cause 'base64 -d'
from coreutils to complain about "invalid input". For convenience add
a small script 'ci/util/extract-trash-dirs.sh', which will extract and
unpack all base64-encoded trash directories embedded in the log fed to
its standard input, and include an example command to be copy-pasted
into a terminal to do it all at the end of the failure report.
A few of our tests create sizeable trash directories, so limit the
size of each included base64-encoded block, let's say, to 1MB. And
just in case something fundamental gets broken and a lot of tests fail
at once, don't include trash directories when the combined size of the
included base64-encoded blocks would exceed 1MB.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Coccinelle's and in turn 'make coccicheck's exit code only indicates
that Coccinelle managed to finish its analysis without any errors
(e.g. no unknown --options, no missing files, no syntax errors in the
semantic patches, etc.), but it doesn't indicate whether it found any
undesired code patterns to transform or not. To find out the latter,
one has to look closer at 'make coccicheck's standard output and look
for lines like:
SPATCH result: contrib/coccinelle/<something>.cocci.patch
And this only indicates that there is something to transform, but to
see what the suggested transformations are one has to actually look
into those '*.cocci.patch' files.
This makes the automated static analysis build job on Travis CI not
particularly useful, because it neither draws our attention to
Coccinelle's findings, nor shows the actual findings. Consequently,
new topics introducing undesired code patterns graduated to master
on several occasions without anyone noticing.
The only way to draw attention in such an automated setting is to fail
the build job. Therefore, modify the 'ci/run-static-analysis.sh'
build script to check all the resulting '*.cocci.patch' files, and
fail the build job if any of them turns out to be not empty. Include
those files' contents, i.e. Coccinelle's suggested transformations, in
the build job's trace log, so we'll know why it failed.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the static analysis build job runs Coccinelle using a single
'make' job. Using two parallel jobs cuts down the build job's run
time from around 10-12mins to 6-7mins, sometimes even under 6mins
(there is quite large variation between build job runtimes). More
than two parallel jobs don't seem to bring further runtime benefits.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's start with some background about oe_delta_size() and
oe_set_delta_size(). If you already know, skip the next paragraph.
These two are added in 0aca34e826 (pack-objects: shrink delta_size
field in struct object_entry - 2018-04-14) to help reduce 'struct
object_entry' size. The delta size field in this struct is reduced to
only contain max 1MB. So if any new delta is produced and larger than
1MB, it's dropped because we can't really save such a large size
anywhere. Fallback is provided in case existing packfiles already have
large deltas, then we can retrieve it from the pack.
While this should help small machines repacking large repos without
large deltas (i.e. less memory pressure), dropping large deltas during
the delta selection process could end up with worse pack files. And if
existing packfiles already have >1MB delta and pack-objects is
instructed to not reuse deltas, all of them will be dropped on the
floor, and the resulting pack would be definitely bigger.
There is also a regression in terms of CPU/IO if we have large on-disk
deltas because fallback code needs to parse the pack every time the
delta size is needed and just access to the mmap'd pack data is enough
for extra page faults when memory is under pressure.
Both of these issues were reported on the mailing list. Here's some
numbers for comparison.
Version Pack (MB) MaxRSS(kB) Time (s)
------- --------- ---------- --------
2.17.0 5498 43513628 2494.85
2.18.0 10531 40449596 4168.94
This patch provides a better fallback that is
- cheaper in terms of cpu and io because we won't have to read
existing pack files as much
- better in terms of pack size because the pack heuristics is back to
2.17.0 time, we do not drop large deltas at all
If we encounter any delta (on-disk or created during try_delta phase)
that is larger than the 1MB limit, we stop using delta_size_ field for
this because it can't contain such size anyway. A new array of delta
size is dynamically allocated and can hold all the deltas that 2.17.0
can. This array only contains delta sizes that delta_size_ can't
contain.
With this, we do not have to drop deltas in try_delta() anymore. Of
course the downside is we use slightly more memory, even compared to
2.17.0. But since this is considered an uncommon case, a bit more
memory consumption should not be a problem.
Delta size limit is also raised from 1MB to 16MB to better cover
common case and avoid that extra memory consumption (99.999% deltas in
this reported repo are under 12MB; Jeff noted binary artifacts topped
out at about 3MB in some other private repos). Other fields are
shuffled around to keep this struct packed tight. We don't use more
memory in common case even with this limit update.
A note about thread synchronization. Since this code can be run in
parallel during delta searching phase, we need a mutex. The realloc
part in packlist_alloc() is not protected because it only happens
during the object counting phase, which is always single-threaded.
Access to e->delta_size_ (and by extension
pack->delta_size[e - pack->objects]) is unprotected as before, the
thread scheduler in pack-objects must make sure "e" is never updated
by two different threads.
The area under the new lock is as small as possible, avoiding locking
at all in common case, since lock contention with high thread count
could be expensive (most blobs are small enough that delta compute
time is short and we end up taking the lock very often). The previous
attempt to always hold a lock in oe_delta_size() and
oe_set_delta_size() increases execution time by 33% when repacking
linux.git with with 40 threads.
Reported-by: Elijah Newren <newren@gmail.com>
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Developer support. Use newer GCC on one of the builds done at
TravisCI.org to get more warnings and errors diagnosed.
* nd/travis-gcc-8:
travis-ci: run gcc-8 on linux-gcc jobs
|
|
Switch from gcc-4.8 to gcc-8. Newer compilers come with more warning
checks (usually in -Wextra). Since -Wextra is enabled in developer
mode (which is also enabled in travis), this lets travis report more
warnings before other people do it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some recent optimizations have been added to pack-objects to reduce
memory usage and some code paths are split into two: one for common
use cases and one for rare ones. Make sure the rare cases are tested
with Travis since it requires manual test configuration that is
unlikely to be done by developers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at there, document about this special mode when running the test
suite.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
|
|
Build the executable in 'script' phase in Travis CI integration, to
follow the established practice, rather than during 'before_script'
phase. This allows the CI categorize the failures better ('failed'
is project's fault, 'errored' is build environment's).
* sg/travis-build-during-script-phase:
travis-ci: build Git during the 'script' phase
|
|
Now that the test suite runs successfully with '-x' tracing even with
/bin/sh, enable it on Travis CI in order to
- get more information about test failures, and
- catch constructs breaking '-x' with /bin/sh sneaking into our test
suite.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Travis updates.
* sg/travis-linux32-sanity:
travis-ci: don't fail if user already exists on 32 bit Linux build job
travis-ci: don't run the test suite as root in the 32 bit Linux build
travis-ci: don't repeat the path of the cache directory
travis-ci: use 'set -e' in the 32 bit Linux build job
travis-ci: use 'set -x' for the commands under 'su' in the 32 bit Linux build
|
|
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
|
|
The 32 bit Linux build job runs in a Docker container, which lends
itself to running and debugging locally, too. Especially during
debugging one usually doesn't want to start with a fresh container
every time, to save time spent on installing a bunch of dependencies.
However, that doesn't work quite smootly, because the script running
in the container always creates a new user, which then must be removed
every time before subsequent executions, or the build script fails.
Make this process more convenient and don't try to create that user if
it already exists and has the right user ID in the container, so
developers don't have to bother with running a 'userdel' each time
before they run the build script.
The build job on Travis CI always starts with a fresh Docker
container, so this change doesn't make a difference there.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Travis CI runs the 32 bit Linux build job in a Docker container, where
all commands are executed as root by default. Therefore, ever since
we added this build job in 88dedd5e7 (Travis: also test on 32-bit
Linux, 2017-03-05), we have a bit of code to create a user in the
container matching the ID of the host user and then to run the test
suite as this user. Matching the host user ID is important, because
otherwise the host user would have no access to any files written by
processes running in the container, notably the logs of failed tests
couldn't be included in the build job's trace log.
Alas, this piece of code never worked, because it sets the variable
holding the user name ($CI_USER) in a subshell, meaning it doesn't
have any effect by the time we get to the point to actually use the
variable to switch users with 'su'. So all this time we were running
the test suite as root.
Reorganize that piece of code in 'ci/run-linux32-build.sh' a bit to
avoid that problematic subshell and to ensure that we switch to the
right user. Furthermore, make the script's optional host user ID
option mandatory, so running the build accidentally as root will
become harder when debugging locally. If someone really wants to run
the test suite as root, whatever the reasons might be, it'll still be
possible to do so by explicitly passing '0' as host user ID.
Finally, one last catch: since commit 7e72cfcee (travis-ci: save prove
state for the 32 bit Linux build, 2017-12-27) the 'prove' test harness
has been writing its state to the Travis CI cache directory from
within the Docker container while running as root. After this patch
'prove' will run as a regular user, so in future build jobs it won't
be able overwrite a previously written, still root-owned state file,
resulting in build job failures. To resolve this we should manually
delete caches containing such root-owned files, but that would be a
hassle. Instead, work this around by changing the owner of the whole
contents of the cache directory to the host user ID.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of our 'ci/*' scripts repeat the name or full path of the Travis
CI cache directory, and the following patches will add new places
using that path.
Use a variable to refer to the path of the cache directory instead, so
it's hard-coded only in a single place.
Pay extra attention to the 32 bit Linux build: it runs in a Docker
container, so pass the path of the cache directory from the host to
the container in an environment variable. Note that an environment
variable passed this way is exported inside the container, therefore
its value is directly available in the 'su' snippet even though that
snippet is single quoted. Furthermore, use the variable in the
container only if it's been assigned a non-empty value, to prevent
errors when someone is running or debugging the Docker build locally,
because in that case the variable won't be set as there won't be any
Travis CI cache.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The script 'ci/run-linux32-build.sh' running inside the Docker
container of the 32 bit Linux build job uses an && chain to break the
build if one of the commands fails. This is problematic for two
reasons:
- The && chain is broken, because there is this in the middle:
test -z $HOST_UID || (CI_USER="ci" && useradd -u $HOST_UID $CI_USER) &&
Luckily it is broken in a way that it didn't lead to false
successes. If installing dependencies fails, then the rest of the
first && chain is skipped and execution resumes after the ||
operator. At that point $HOST_UID is still unset, causing
'useradd' to error out with "invalid user ID 'ci'", which in turn
causes the second && chain to abort the script and thus break the
build.
- All other 'ci/*' scripts use 'set -e' to break the build if one of
the commands fails. This inconsistency among these scripts is
asking for trouble: I forgot about the && chain more than once
while working on this patch series.
Enable 'set -e' for the whole script and for the commands executed
under 'su' as well.
While touching every line in the 'su' command block anyway, change
their indentation to use a tab instead of spaces.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split index mode only has a few dedicated tests, but as the index is
involved in nearly every git operation, this doesn't quite cover all the
ways repositories with split index can break. To use split index mode
throughout the test suite a GIT_TEST_SPLIT_INDEX environment variable
can be set, which makes git split the index at random and thus
excercises the functionality much more thoroughly.
As this is not turned on by default, it is not executed nearly as often
as the test suite is run, so occationally breakages slip through. Try
to counteract that by running the test suite with GIT_TEST_SPLIT_INDEX
mode turned on on travis.
To avoid using too many cycles on travis only run split index mode in
the linux-gcc target only. The Linux build was chosen over the Mac OS
builds because it tends to be much faster to complete.
The linux gcc build was chosen over the linux clang build because the
linux clang build is the fastest build, so it can serve as an early
indicator if something is broken and we want to avoid spending the extra
cycles of running the test suite twice for that.
Helped-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since we started building and testing Git on Travis CI (522354d70
(Add Travis CI support, 2015-11-27)), we build Git in the
'before_script' phase and run the test suite in the 'script' phase
(except in the later introduced 32 bit Linux and Windows build jobs,
where we build in the 'script' phase').
Contrarily, the Travis CI practice is to build and test in the
'script' phase; indeed Travis CI's default build command for the
'script' phase of C/C++ projects is:
./configure && make && make test
The reason why Travis CI does it this way and why it's a better
approach than ours lies in how unsuccessful build jobs are
categorized. After something went wrong in a build job, its state can
be:
- 'failed', if a command in the 'script' phase returned an error.
This is indicated by a red 'X' on the Travis CI web interface.
- 'errored', if a command in the 'before_install', 'install', or
'before_script' phase returned an error, or the build job exceeded
the time limit. This is shown as a red '!' on the web interface.
This makes it easier, both for humans looking at the Travis CI web
interface and for automated tools querying the Travis CI API, to
decide when an unsuccessful build is our responsibility requiring
human attention, i.e. when a build job 'failed' because of a compiler
error or a test failure, and when it's caused by something beyond our
control and might be fixed by restarting the build job, e.g. when a
build job 'errored' because a dependency couldn't be installed due to
a temporary network error or because the OSX build job exceeded its
time limit.
The drawback of building Git in the 'before_script' phase is that one
has to check the trace log of all 'errored' build jobs, too, to see
what caused the error, as it might have been caused by a compiler
error. This requires additional clicks and page loads on the web
interface and additional complexity and API requests in automated
tools.
Therefore, move building Git from the 'before_script' phase to the
'script' phase, updating the script's name accordingly as well.
'ci/run-builds.sh' now becomes basically empty, remove it. Several of
our build job configurations override our default 'before_script' to
do nothing; with this change our default 'before_script' won't do
anything, either, so remove those overriding directives as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every once in a while our explicit .gitignore files get out of sync
when our build process learns to create new artifacts, like test
helper executables, but the .gitignore files are not updated
accordingly.
Use Travis CI to help catch such issues earlier: check that there are
no untracked files at the end of any build jobs building Git (i.e. the
64 bit Clang and GCC Linux and OSX build jobs, plus the GETTEXT_POISON
and 32 bit Linux build jobs) or its documentation, and fail the build
job if there are any present.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Clang and GCC 64 bit Linux build jobs download and store the P4
and Git LFS executables under the current directory, which is the
working tree that we are about to build and test. This means that Git
commands like 'status' or 'ls-files' would list these files as
untracked. The next commit is about to make sure that there are no
untracked files present after the build, and the downloaded
executables in the working tree are interfering with those upcoming
checks.
Therefore, let's download P4 and Git LFS in the home directory,
outside of the working tree.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Travis CI dutifully builds and tests each new branch tip, even if its
tree has previously been successfully built and tested. This happens
often enough in contributors' workflows, when a work-in-progress
branch is rebased changing e.g. only commit messages or the order or
number of commits while leaving the resulting code intact, and is then
pushed to a Travis CI-enabled GitHub fork.
This is wasting Travis CI's resources and is sometimes scary-annoying
when the new tip commit with a tree identical to the previous,
successfully tested one is suddenly reported in red, because one of
the OSX build jobs happened to exceed the time limit yet again.
So extend our Travis CI build scripts to skip building commits whose
trees have previously been successfully built and tested. Use the
Travis CI cache feature to keep a record of the object names of trees
that tested successfully, in a plain and simple flat text file, one
line per tree object name. Append the current tree's object name at
the end of every successful build job to this file, along with a bit
of additional info about the build job (commit object name, Travis CI
job number and id). Limit the size of this file to 1000 records, to
prevent it from growing too large for git/git's forever living
integration branches. Check, using a simple grep invocation, in each
build job whether the current commit's tree is already in there, and
skip the build if it is. Include a message in the skipped build job's
trace log, containing the URL to the build job successfully testing
that tree for the first time and instructions on how to force a
re-build. Catch the case when a build job, which successfully built
and tested a particular tree for the first time, is restarted and omit
the URL of the previous build job's trace log, as in this case it's
the same build job and the trace log has just been overwritten.
Note: this won't kick in if two identical trees are on two different
branches, because Travis CI caches are not shared between build jobs
of different branches.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Johannes Schindelin
Junio C Hamano
Ævar Arnfjörð Bjarmason
Derrick Stolee
Nguyễn Thái Ngọc Duy
Thomas Gummerer