| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git pack-refs" that races with new ref creation or deletion have
been susceptible to lossage of refs under right conditions, which
has been tightened up.
* mh/ref-races:
for_each_ref: load all loose refs before packed refs
get_packed_ref_cache: reload packed-refs file when it changes
add a stat_validity struct
Extract a struct stat_data from cache_entry
packed_ref_cache: increment refcount when locked
do_for_each_entry(): increment the packed refs cache refcount
refs: manage lifetime of packed refs cache via reference counting
refs: implement simple transactions for the packed-refs file
refs: wrap the packed refs cache in a level of indirection
pack_refs(): split creation of packed refs and entry writing
repack_without_ref(): split list curation and entry writing
|
|
* nd/traces:
git.txt: document GIT_TRACE_PACKET
core: use env variable instead of config var to turn on logging pack access
|
|
It can sometimes be useful to know whether a path in the
filesystem has been updated without going to the work of
opening and re-reading its content. We trust the stat()
information on disk already to handle index updates, and we
can use the same trick here.
This patch introduces a "stat_validity" struct which
encapsulates the concept of checking the stat-freshness of a
file. It is implemented on top of "struct stat_data" to
reuse the logic about which stat entries to trust for a
particular platform, but hides the complexity behind two
simple functions: check and update.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add public functions fill_stat_data() and match_stat_data() to work
with it. This infrastructure will later be used to check the validity
of other types of file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/unpack-trees-plug-leak:
unpack-trees: free cache_entry array members for merges
diff-lib, read-tree, unpack-trees: mark cache_entry array paramters const
diff-lib, read-tree, unpack-trees: mark cache_entry pointers const
unpack-trees: create working copy of merge entry in merged_entry
unpack-trees: factor out dup_entry
read-cache: mark cache_entry pointers const
cache: mark cache_entry pointers const
|
|
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch origin master" unlike "git fetch origin" or "git fetch"
did not update "refs/remotes/origin/master"; this was an early
design decision to keep the update of remote tracking branches
predictable, but in practice it turns out that people find it more
convenient to opportunisticly update them whenever we have a chance,
and we have been updating them when we run "git push" which already
breaks the original "predictability" anyway.
Now such a fetch does update refs/remotes/origin/master.
* jk/fetch-always-update-tracking:
fetch: don't try to update unfetched tracking refs
fetch: opportunistically update tracking refs
refactor "ref->merge" flag
fetch/pull doc: untangle meaning of bare <ref>
t5510: start tracking-ref tests from a known state
|
|
ie_match_stat and ie_modified only derefence their struct cache_entry
pointers for reading. Add const to the parameter declaration here and
do the same for the static helper function used by them, as it's the
same there as well. This allows callers to pass in const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add const for pointers that are only dereferenced for reading by the
inline functions copy_cache_entry and ce_mode_from_stat. This allows
callers to pass in const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used the approxidate() parser for "--expire=<timestamp>" options
of various commands, but it is better to treat --expire=all and
--expire=now a bit more specially than using the current timestamp.
Update "git gc" and "git reflog" with a new parsing function for
expiry dates.
* jc/prune-all:
prune: introduce OPT_EXPIRY_DATE() and use it
api-parse-options.txt: document "no-" for non-boolean options
git-gc.txt, git-reflog.txt: document new expiry options
date.c: add parse_expiry_date()
|
|
Each "struct ref" has a boolean flag that is set by the
fetch code to determine whether the ref should be marked as
"not-for-merge" or not when we write it out to FETCH_HEAD.
It would be useful to turn this boolean into a tri-state,
with the third state meaning "do not bother writing it out
to FETCH_HEAD at all". That would let us add extra refs to
the set of refs to be stored (e.g., to store copies of
things we fetched) without impacting FETCH_HEAD.
This patch turns it into an enum that covers the tri-state
case, and hopefully makes the code more explicit and easier
to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce duplicated code between convert.c and attr.c.
* lf/read-blob-data-from-index:
convert.c: remove duplicate code
read_blob_data_from_index(): optionally return the size of blob data
attr.c: extract read_index_data() as read_blob_data_from_index()
|
|
In Git 2.0, "git add -u" and "git add -A" without any pathspec will
update the index for all paths, including those outside the current
directory, making it more consistent with "commit -a". To help the
migration pain, a warning is issued when the differences between the
current behaviour and the upcoming behaviour matters, i.e. when the
user has local changes outside the current directory.
* 'jn/add-2.0-u-A-sans-pathspec' (early part):
add -A: only show pathless 'add -A' warning when changes exist outside cwd
add -u: only show pathless 'add -u' warning when changes exist outside cwd
add: make warn_pathless_add() a no-op after first call
add: add a blank line at the end of pathless 'add [-u|-A]' warning
add: make pathless 'add [-u|-A]' warning a file-global function
|
|
"git reflog --expire=all" tries to expire reflog entries up to the
current second, because the approxidate() parser gives the current
timestamp for anything it does not understand (and it does not know
what time "all" means). When the user tells us to expire "all" (or
set the expiration time to "now"), the user wants to remove all the
reflog entries (no reflog entry should record future time).
Just set it to ULONG_MAX and to let everything that is older that
timestamp expire.
While at it, allow "now" to be treated the same way for callers that
parse expiry date timestamp with this function. Also use an error
reporting version of approxidate() to report misspelled date. When
the user says e.g. "--expire=mnoday" to delete entries two days or
older on Wednesday, we wouldn't want the "unknown, default to now"
logic to kick in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows for optionally getting the size of the returned data and
will be used in a follow-up patch.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract the read_index_data() function from attr.c and move it to
read-cache.c; rename it to read_blob_data_from_index() and update
the function signature of it to align better with index/cache API
functions.
This allows for reusing the function in convert.c later.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplifies adjust_shared_perm() implementation.
* tb/shared-perm:
path.c: optimize adjust_shared_perm()
path.c: simplify adjust_shared_perm()
|
|
All calls to set_shared_perm() use mode == 0, so simplify the
function.
Because all callers use the macro adjust_shared_perm(path) from
cache.h to call this function, convert it to a proper function,
losing set_shared_perm().
Since path.c has much more functions than just mkpath() these days,
drop the stale comment about it.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common workflow in large projects is to chdir into a subdirectory of
interest and only do work there:
cd src
vi foo.c
make test
git add -u
git commit
The upcoming change to 'git add -u' behavior would not affect such a
workflow: when the only changes present are in the current directory,
'git add -u' will add all changes, and whether that happens via an
implicit "." or implicit ":/" parameter is an unimportant
implementation detail.
The warning about use of 'git add -u' with no pathspec is annoying
because it seemingly serves no purpose in this case. So suppress the
warning unless there are changes outside the cwd that are not being
added.
A previous version of this patch ran two I/O-intensive diff-files
passes: one to find changes outside the cwd, and another to find
changes to add to the index within the cwd. This version runs one
full-tree diff and decides for each change whether to add it or warn
and suppress it in update_callback. As a result, even on very large
repositories "git add -u" will not be significantly slower than the
future default behavior ("git add -u :/"), and the slowdown relative
to "git add -u ." should be a useful clue to users of such
repositories to get into the habit of explicitly passing '.'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consolidate repeated pathspec matches on the same paths, while
fixing a bug in "git checkout dir/" code started from an unmerged
index.
* nd/checkout-paths-reduce-match-pathspec-calls:
checkout: avoid unnecessary match_pathspec calls
|
|
* kb/name-hash:
name-hash.c: fix endless loop with core.ignorecase=true
|
|
The code to keep track of what directory names are known to Git on
platforms with case insensitive filesystems can get confused upon
a hash collision between these pathnames and looped forever.
* kb/name-hash:
name-hash.c: fix endless loop with core.ignorecase=true
|
|
Clean up pkt-line API, implementation and its callers to make them
more robust.
* jk/pkt-line-cleanup:
do not use GIT_TRACE_PACKET=3 in tests
remote-curl: always parse incoming refs
remote-curl: move ref-parsing code up in file
remote-curl: pass buffer straight to get_remote_heads
teach get_remote_heads to read from a memory buffer
pkt-line: share buffer/descriptor reading implementation
pkt-line: provide a LARGE_PACKET_MAX static buffer
pkt-line: move LARGE_PACKET_MAX definition from sideband
pkt-line: teach packet_read_line to chomp newlines
pkt-line: provide a generic reading function with options
pkt-line: drop safe_write function
pkt-line: move a misplaced comment
write_or_die: raise SIGPIPE when we get EPIPE
upload-archive: use argv_array to store client arguments
upload-archive: do not copy repo name
send-pack: prefer prefixcmp over memcmp in receive_status
fetch-pack: fix out-of-bounds buffer offset in get_ack
upload-pack: remove packet debugging harness
upload-pack: do not add duplicate objects to shallow list
upload-pack: use get_sha1_hex to parse "shallow" lines
|
|
* rs/archive-zip-raw-compression:
archive-zip: use deflateInit2() to ask for raw compressed data
|
|
In checkout_paths() we do this
- for all updated items, call match_pathspec
- for all items, call match_pathspec (inside unmerge_cache)
- for all items, call match_pathspec (for showing "path .. is unmerged)
- for updated items, call match_pathspec and update paths
That's a lot of duplicate match_pathspec(s) and the function is not
exactly cheap to be called so many times, especially on large indexes.
This patch makes it call match_pathspec once per updated index entry,
save the result in ce_flags and reuse the results in the following
loops.
The changes in 0a1283b (checkout $tree $path: do not clobber local
changes in $path not in $tree - 2011-09-30) limit the affected paths
to ones we read from $tree. We do not do anything to other modified
entries in this case, so the "for all items" above could be modified
to "for all updated items". But..
The command's behavior now is modified slightly: unmerged entries that
match $path, but not updated by $tree, are now NOT touched. Although
this should be considered a bug fix, not a regression. A new test is
added for this change.
And while at there, free ps_matched after use.
The following command is tested on webkit, 215k entries. The pattern
is chosen mainly to make match_pathspec sweat:
git checkout -- "*[a-zA-Z]*[a-zA-Z]*[a-zA-Z]*"
before after
real 0m3.493s 0m2.737s
user 0m2.239s 0m1.586s
sys 0m1.252s 0m1.151s
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
|
|
"git count-objects -v" did not count leftover temporary packfiles
and other kinds of garbage.
* nd/count-garbage:
count-objects: report how much disk space taken by garbage files
count-objects: report garbage files in pack directory too
sha1_file: reorder code in prepare_packed_git_one()
git-count-objects.txt: describe each line in -v output
|
|
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
|
|
We use the function git_deflate_init() -- which wraps the zlib function
deflateInit() -- to initialize compression of ZIP file entries. This
results in compressed data prefixed with a two-bytes long header and
followed by a four-bytes trailer. ZIP file entries consist of ZIP
headers and raw compressed data instead, so we remove the zlib wrapper
before writing the result.
We can ask zlib for the the raw compressed data without the unwanted
parts in the first place by using deflateInit2() and specifying a
negative number of bits to size the window. For that purpose, factor
out the function do_git_deflate_init() and add git_deflate_init_raw(),
which wraps it. Then use the latter in archive-zip.c and get rid of
the code that stripped the zlib header and trailer.
Also rename the helper function zlib_deflate() to zlib_deflate_raw()
to reflect the change.
Thus we avoid generating data that we throw away anyway, the code
becomes shorter and some magic constants are removed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an explicit GIT_DIR is given without a working tree, we
implicitly assume that the current working directory should
be used as the working tree. E.g.,:
GIT_DIR=/some/repo.git git status
would compare against the cwd.
Unfortunately, we fool this rule for sub-invocations of git
by setting GIT_DIR internally ourselves. For example:
git init foo
cd foo/.git
git status ;# fails, as we expect
git config alias.st status
git status ;# does not fail, but should
What happens is that we run setup_git_directory when doing
alias lookup (since we need to see the config), set GIT_DIR
as a result, and then leave GIT_WORK_TREE blank (because we
do not have one). Then when we actually run the status
command, we do setup_git_directory again, which sees our
explicit GIT_DIR and uses the cwd as an implicit worktree.
It's tempting to argue that we should be suppressing that
second invocation of setup_git_directory, as it could use
the values we already found in memory. However, the problem
still exists for sub-processes (e.g., if "git status" were
an external command).
You can see another example with the "--bare" option, which
sets GIT_DIR explicitly. For example:
git init foo
cd foo/.git
git status ;# fails
git --bare status ;# does NOT fail
We need some way of telling sub-processes "even though
GIT_DIR is set, do not use cwd as an implicit working tree".
We could do it by putting a special token into
GIT_WORK_TREE, but the obvious choice (an empty string) has
some portability problems.
Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE,
which suppresses the use of cwd as a working tree when
GIT_DIR is set. We trigger the new variable when we know we
are in a bare setting.
The variable is left intentionally undocumented, as this is
an internal detail (for now, anyway). If somebody comes up
with a good alternate use for it, and once we are confident
we have shaken any bugs out of it, we can consider promoting
it further.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_PREFIX variable is set based on our location within
the working tree. It should therefore be cleared whenever
GIT_WORK_TREE is cleared.
In practice, this doesn't cause any bugs, because none of
the sub-programs we invoke with local_repo_env cleared
actually care about GIT_PREFIX. But this is the right thing
to do, and future proofs us against that assumption changing.
While we're at it, let's define a GIT_PREFIX_ENVIRONMENT
macro; this avoids repetition of the string literal, which
can help catch any spelling mistakes in the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We keep a static array of variables that should be cleared
when invoking a sub-process on another repo. We statically
size the array with the LOCAL_REPO_ENV_SIZE macro so that
any readers do not have to count it themselves.
As it turns out, no readers actually use the macro, and it
creates a maintenance headache, as modifications to the
array need to happen in two places (one to add the new
element, and another to bump the size).
Since it's NULL-terminated, we can just drop the size macro
entirely. While we're at it, we'll clean up some comments
around it, and add a new mention of it at the top of the
list of environment variable macros. Even though
local_repo_env is right below that list, it's easy to miss,
and additions to that list should consider local_repo_env.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With core.ignorecase=true, name-hash.c builds a case insensitive index of
all tracked directories. Currently, the existing cache entry structures are
added multiple times to the same hashtable (with different name lengths and
hash codes). However, there's only one dir_next pointer, which gets
completely messed up in case of hash collisions. In the worst case, this
causes an endless loop if ce == ce->dir_next (see t7062).
Use a separate hashtable and separate structures for the directory index
so that each directory entry has its own next pointer. Use reference
counting to track which directory entry contains files.
There are only slight changes to the name-hash.c API:
- new free_name_hash() used by read_cache.c::discard_index()
- remove_name_hash() takes an additional index_state parameter
- index_name_exists() for a directory (trailing '/') may return a cache
entry that has been removed (CE_UNHASHED). This is not a problem as the
return value is only used to check if the directory exists (dir.c) or to
normalize casing of directory names (read-cache.c).
Getting rid of cache_entry.dir_next reduces memory consumption, especially
with core.ignorecase=false (which doesn't use that member at all).
With core.ignorecase=true, building the directory index is slightly faster
as we add / check the parent directory first (instead of going through all
directory levels for each file in the index). E.g. with WebKit (~200k
files, ~7k dirs), time spent in lazy_init_name_hash is reduced from 176ms
to 130ms.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we can read packet data from memory as easily as a
descriptor, get_remote_heads can take either one as a
source. This will allow further refactoring in remote-curl.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prepare_packed_git_one() is modified to allow count-objects to hook a
report function to so we don't need to duplicate the pack searching
logic in count-objects.c. When report_pack_garbage is NULL, the
overhead is insignificant.
The garbage is reported with warning() instead of error() in packed
garbage case because it's not an error to have garbage. Loose garbage
is still reported as errors and will be converted to warnings later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though "git fetch" has full infrastructure to parse refspecs to
be fetched and match them against the list of refs to come up with
the final list of refs to be fetched, the list of refs that are
requested to be fetched were internally converted to a plain list of
strings at the transport layer and then passed to the underlying
fetch-pack driver.
Stop this conversion and instead pass around an array of refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve error and advice messages given locally when "git push"
refuses when it cannot compute fast-forwardness by separating these
cases from the normal "not a fast-forward; merge first and push
again" case.
* jc/push-reject-reasons:
push: finishing touches to explain REJECT_ALREADY_EXISTS better
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
push: further simplify the logic to assign rejection reason
push: further clean up fields of "struct ref"
|
|
Configuration parsing for tar.* configuration variables were
broken. Introduce a new config-keyname parser API to make the
callers much less error prone.
* jk/config-parsing-cleanup:
reflog: use parse_config_key in config callback
help: use parse_config_key for man config
submodule: simplify memory handling in config parsing
submodule: use parse_config_key when parsing config
userdiff: drop parse_driver function
convert some config callbacks to parse_config_key
archive-tar: use parse_config_key when parsing config
config: add helper function for parsing key names
|
|
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
|
|
Some reimplementations of Git does not write all the stat info back
to the index due to their implementation limitations (e.g. jgit
running on Java). A configuration option can tell Git to ignore
changes to most of the stat fields and only pay attention to mtime
and size, which these implementations can reliably update. This
avoids excessive revalidation of contents.
* rr/minimal-stat:
Enable minimal stat checking
|
|
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()
|
|
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "nonfastforward" and "update" fields are only used while
deciding what value to assign to the "status" locally in a single
function. Remove them from the "struct ref".
The "requires_force" field is not used to decide if the proposed
update requires a --force option to succeed, or to record such a
decision made elsewhere. It is used by status reporting code that
the particular update was "forced". Rename it to "forced_update",
and move the code to assign to it around to further clarify how it
is used and what it is used for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/suppress-clang-warning:
fix clang -Wunused-value warnings for error functions
|
|
Regression fix to stop "git push" complaining "target ref already
exists", when it is not the real reason the command rejected the
request (e.g. non-fast-forward).
* cr/push-force-tag-update:
push: fix "refs/tags/ hierarchy cannot be updated without --force"
|
|
The config callback functions get keys of the general form:
section.subsection.key
(where the subsection may be contain arbitrary data, or may
be missing). For matching keys without subsections, it is
simple enough to call "strcmp". Matching keys with
subsections is a little more complicated, and each callback
does it in an ad-hoc way, usually involving error-prone
pointer arithmetic.
Let's provide a helper that keeps the pointer arithmetic all
in one place.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing to update a branch with a commit that is not a
descendant of the commit at the tip, a wrong message "already
exists" was given, instead of the correct "non-fast-forward", if we
do not have the object sitting in the destination repository at the
tip of the ref we are updating.
The primary cause of the bug is that the check in a new helper
function is_forwardable() assumed both old and new objects are
available and can be checked, which is not always the case.
The way the caller uses the result of this function is also wrong.
If the helper says "we do not want to let this push go through", the
caller unconditionally translates it into "we blocked it because the
destination already exists", which is not true at all in this case.
Fix this by doing these three things:
* Remove unnecessary not_forwardable from "struct ref"; it is only
used inside set_ref_status_for_push();
* Make "refs/tags/" the only hierarchy that cannot be replaced
without --force;
* Remove the misguided attempt to force that everything that
updates an existing ref has to be a commit outside "refs/tags/"
hierarchy.
The policy last one tried to implement may later be resurrected and
extended to ensure fast-forwardness (defined as "not losing
objects", extending from the traditional "not losing commits from
the resulting history") when objects that are not commit are
involved (e.g. an annotated tag in hierarchies outside refs/tags),
but such a logic belongs to "is this a fast-forward?" check that is
done by ref_newer(); is_forwardable(), which is now removed, was not
the right place to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit a469a10 wraps some error calls in macros to give the
compiler a chance to do more static analysis on their
constant -1 return value. We limit the use of these macros
to __GNUC__, since gcc is the primary beneficiary of the new
information, and because we use GNU features for handling
variadic macros.
However, clang also defines __GNUC__, but generates warnings
with -Wunused-value when these macros are used in a void
context, because the constant "-1" ends up being useless.
Gcc does not complain about this case (though it is unclear
if it is because it is smart enough to see what we are
doing, or too dumb to realize that the -1 is unused). We
can squelch the warning by just disabling these macros when
clang is in use.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michael Haggerty
Nguyễn Thái Ngọc Duy
René Scharfe
Jeff King
Lukas Fleischer
Torsten Bögershausen
Jonathan Nieder
Karsten Blees
Robin Rosenberg
Max Horn