| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* sb/sha1-file-cleanup:
sha1_file: make read_info_alternates static
|
|
Code clean-up.
* jk/hashcmp-memcmp:
hashcmp: use memcmp instead of open-coded loop
|
|
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
|
|
read_info_alternates is not used from outside, so let's make it static.
We have to declare the function before link_alt_odb_entry instead of
moving the code around, link_alt_odb_entry calls read_info_alternates,
which in turn calls link_alt_odb_entry.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1a812f3a70 (hashcmp(): inline memcmp() by hand to
optimize, 2011-04-28), it was reported that an open-coded
loop outperformed memcmp() for comparing sha1s.
Discussion[1] a few years later in 2013 showed that this
depends on your libc's version of memcmp(). In particular,
glibc 2.13 optimized their memcmp around 2011. Here are
current timings with glibc 2.24 (best-of-five, on
linux.git):
[before this patch, open-coded]
$ time git rev-list --objects --all
real 0m35.357s
user 0m35.016s
sys 0m0.340s
[after this patch, memcmp]
real 0m32.930s
user 0m32.630s
sys 0m0.300s
Now that we've had 6 years for that version of glibc to
make its way onto people's machines, it's worth revisiting
our benchmarks and switching to memcmp().
It may be that there are other non-glibc systems where
memcmp() isn't as well optimized. But since our single data
point in favor of open-coding was on a now-ancient glibc, we
should probably assume the system memcmp is good unless
proven otherwise. We may end up with a SLOW_MEMCMP Makefile
knob, but we can hold off on that until we actually find
such a system in practice.
[1] https://public-inbox.org/git/20130318073229.GA5551@sigill.intra.peff.net/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
Git 2.11.3
|
|
Git 2.10.4
|
|
Git 2.9.5
|
|
Git 2.8.6
|
|
Git 2.7.6
|
|
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
|
|
Code clean-ups.
* jt/unify-object-info:
sha1_file: refactor has_sha1_file_with_flags
sha1_file: do not access pack if unneeded
sha1_file: teach sha1_object_info_extended more flags
sha1_file: refactor read_object
sha1_file: move delta base cache code up
sha1_file: rename LOOKUP_REPLACE_OBJECT
sha1_file: rename LOOKUP_UNKNOWN_OBJECT
sha1_file: teach packed_object_info about typename
|
|
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
|
|
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
has_sha1_file_with_flags() implements many mechanisms in common with
sha1_object_info_extended(). Make has_sha1_file_with_flags() a
convenience function for sha1_object_info_extended() instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve sha1_object_info_extended() by supporting additional
flags. This allows has_sha1_file_with_flags() to be modified to use
sha1_object_info_extended() in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Loose object subdirectories have hexadecimal names based on the first
byte of the hash of contained objects, thus their numerical
representation can range from 0 (0x00) to 255 (0xff). Change the type
of the corresponding variable in for_each_file_in_obj_subdir() and
associated callback functions to unsigned int and add a range check.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all path related declarations from cache.h to a new path.h header
file. This makes cache.h smaller and makes it easier to add new path
related functions.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrate 'git_dir', 'git_common_dir', 'git_object_dir', 'git_index_file',
'git_graft_file', and 'namespace' to be stored in 'the_repository'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under some circumstances (bogus GIT_DIR value or the discovered gitdir
is '.git') 'setup_git_directory()' won't initialize key repository
state. This leads to inconsistent state after running the setup code.
To account for this inconsistent state, lazy initialization is done once
a caller asks for the repository's gitdir or some other piece of
repository state. This is confusing and can be error prone.
Instead let's tighten the expected outcome of 'setup_git_directory()'
and ensure that it initializes repository state in all cases that would
have been handled by lazy initialization.
This also lets us drop the requirement to have 'have_git_dir()' check if
the environment variable GIT_DIR was set as that will be handled by the
end of the setup code.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bw/repo-object
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
|
|
Read each loose object subdirectory at most once when looking for unique
abbreviated hashes. This speeds up commands like "git log --pretty=%h"
considerably, which previously caused one readdir(3) call for each
candidate, even for subdirectories that were visited before.
The new cache is kept until the program ends and never invalidated. The
same is already true for pack indexes. The inherent racy nature of
finding unique short hashes makes it still fit for this purpose -- a
conflicting new object may be added at any time. Tasks with higher
consistency requirements should not use it, though.
The cached object names are stored in an oid_array, which is quite
compact. The bitmap for remembering which subdir was already read is
stored as a char array, with one char per directory -- that's not quite
as compact, but really simple and incurs only an overhead equivalent to
11 hashes after all.
Suggested-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_object() and sha1_object_info_extended() both implement mechanisms
such as object replacement, retrying the packed store after failing to
find the object in the packed store then the loose store, and being able
to mark a packed object as bad and then retrying the whole process.
Consolidating these mechanisms would be a great help to maintainability.
Therefore, consolidate them by extending sha1_object_info_extended() to
support the functionality needed, and then modifying read_object() to
use sha1_object_info_extended().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The LOOKUP_REPLACE_OBJECT flag controls whether the
lookup_replace_object() function is invoked by
sha1_object_info_extended(), read_sha1_file_extended(), and
lookup_replace_object_extended(), but it is not immediately clear which
functions accept that flag.
Therefore restrict this flag to only sha1_object_info_extended(),
renaming it appropriately to OBJECT_INFO_LOOKUP_REPLACE and adding some
documentation. Update read_sha1_file_extended() to have a boolean
parameter instead, and delete lookup_replace_object_extended().
parse_sha1_header() also passes this flag to
parse_sha1_header_extended() since commit 46f0344 ("sha1_file: support
reading from a loose object of unknown type", 2015-05-03), but that has
had no effect since that commit. Therefore this patch also removes this
flag from that invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The LOOKUP_UNKNOWN_OBJECT flag was introduced in commit 46f0344
("sha1_file: support reading from a loose object of unknown type",
2015-05-03) in order to support a feature in cat-file subsequently
introduced in commit 39e4ae3 ("cat-file: teach cat-file a
'--allow-unknown-type' option", 2015-05-03). Despite its name and
location in cache.h, this flag is used neither in
read_sha1_file_extended() nor in any of the lookup functions, but used
only in sha1_object_info_extended().
Therefore rename this flag to OBJECT_INFO_ALLOW_UNKNOWN_TYPE, taking the
name of the cat-file flag that invokes this feature, and move it closer
to the declaration of sha1_object_info_extended(). Also add
documentation for this flag.
OBJECT_INFO_ALLOW_UNKNOWN_TYPE is defined to 2, not 1, to avoid
conflicting with LOOKUP_REPLACE_OBJECT. Avoidance of this conflict is
necessary because sha1_object_info_extended() supports both flags.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bw/object-id: (33 commits)
diff: rename diff_fill_sha1_info to diff_fill_oid_info
diffcore-rename: use is_empty_blob_oid
tree-diff: convert path_appendnew to object_id
tree-diff: convert diff_tree_paths to struct object_id
tree-diff: convert try_to_follow_renames to struct object_id
builtin/diff-tree: cleanup references to sha1
diff-tree: convert diff_tree_sha1 to struct object_id
notes-merge: convert write_note_to_worktree to struct object_id
notes-merge: convert verify_notes_filepair to struct object_id
notes-merge: convert find_notes_merge_pair_ps to struct object_id
notes-merge: convert merge_from_diffs to struct object_id
notes-merge: convert notes_merge* to struct object_id
tree-diff: convert diff_root_tree_sha1 to struct object_id
combine-diff: convert find_paths_* to struct object_id
combine-diff: convert diff_tree_combined to struct object_id
diff: convert diff_flush_patch_id to struct object_id
patch-ids: convert to struct object_id
diff: finish conversion for prepare_temp_file to struct object_id
diff: convert reuse_worktree_file to struct object_id
diff: convert fill_filespec to struct object_id
...
|
|
Currently 'discover_git_directory' only looks at the gitdir to determine
if a git directory was discovered. This causes a problem in the event
that the gitdir which was discovered was in fact a per-worktree git
directory and not the common git directory. This is because the
repository config, which is checked to verify the repository's format,
is stored in the commondir and not in the per-worktree gitdir. Correct
this behavior by checking the config stored in the commondir.
It will also be of use for callers to have access to the commondir, so
lets also return that upon successfully discovering a git directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all config related declarations from cache.h to a new config.h
header file. This makes cache.h smaller and allows for the opportunity
in a following patch to only include config.h when needed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
|
|
Convert the remaining parts of grep to use struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git checkout", "git merge", etc. manipulates the in-core
index, various pieces of information in the index extensions are
discarded from the original state, as it is usually not the case
that they are kept up-to-date and in-sync with the operation on the
main index. The untracked cache extension is copied across these
operations now, which would speed up "git status" (as long as the
cache is properly invalidated).
* dt/unpack-save-untracked-cache-extension:
unpack-trees: preserve index extensions
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
|
|
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An early version of the patch to add object_context used the
name object_resolve_context. This was later shortened to
just object_context, but the "orc" variable name stuck in a
few places. Let's use "oc", which is used elsewhere in the
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git checkout (and other unpack_tree operations) preserve the
untracked cache. This is valuable for two reasons:
1. Often, an unpack_tree operation will not touch large parts of the
working tree, and thus most of the untracked cache will continue to be
valid.
2. Even if the untracked cache were entirely invalidated by such an
operation, the user has signaled their intention to have such a cache,
and we don't want to throw it away.
[jes: backed out the watchman-specific parts]
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
|
|
Converting checkout_fast_forward is required to convert
parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
|
|
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
|
|
The index file has a trailing SHA-1 checksum to detect file
corruption, and historically we checked it every time the index
file is used. Omit the validation during normal use, and instead
verify only in "git fsck".
* jh/verify-index-checksum-only-in-fsck:
read-cache: force_verify_index_checksum
|
|
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
|
|
Allow the http.postbuffer configuration variable to be set to a
size that can be expressed in size_t, which can be larger than
ulong on some platforms.
* dt/http-postbuffer-can-be-large:
http.postbuffer: allow full range of ssize_t values
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
Ramsay Jones
Junio C Hamano
Stefan Beller
Jeff King
Lars Schneider
Jonathan Tan
René Scharfe
Brandon Williams
David Turner
brian m. carlson
Johannes Schindelin