| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fixes quite a lot of brokenness when ident information needs to be taken
from the system and cleans up the code.
By Jeff King
* jk/ident-gecos-strbuf: (22 commits)
format-patch: do not use bogus email addresses in message ids
ident: reject bogus email addresses with IDENT_STRICT
ident: rename IDENT_ERROR_ON_NO_NAME to IDENT_STRICT
format-patch: use GIT_COMMITTER_EMAIL in message ids
ident: let callers omit name with fmt_indent
ident: refactor NO_DATE flag in fmt_ident
ident: reword empty ident error message
format-patch: refactor get_patch_filename
ident: trim whitespace from default name/email
ident: use a dynamic strbuf in fmt_ident
ident: use full dns names to generate email addresses
ident: report passwd errors with a more friendly message
drop length limitations on gecos-derived names and emails
ident: don't write fallback username into git_default_name
fmt_ident: drop IDENT_WARN_ON_NO_NAME code
format-patch: use default email for generating message ids
ident: trim trailing newline from /etc/mailname
move git_default_* variables to ident.c
move identity config parsing to ident.c
fmt-merge-msg: don't use static buffer in record_person
...
|
|
Callers who ask for ERROR_ON_NO_NAME are not so much
concerned that the name will be blank (because, after all,
we will fall back to using the username), but rather it is a
check to make sure that low-quality identities do not end up
in things like commit messages or emails (whereas it is OK
for them to end up in things like reflogs).
When future commits add more quality checks on the identity,
each of these callers would want to use those checks, too.
Rather than modify each of them later to add a new flag,
let's refactor the flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most callers want to see all of "$name <$email> $date", but
a few want only limited parts, omitting the date, or even
the name. We already have IDENT_NO_DATE to handle the date
part, but there's not a good option for getting just the
email. Callers have to done one of:
1. Call ident_default_email; this does not respect
environment variables, nor does it promise to trim
whitespace or other crud from the result.
2. Call git_{committer,author}_info; this returns the name
and email, leaving the caller to parse out the wanted
bits.
This patch adds IDENT_NO_NAME; it stops short of adding
IDENT_NO_EMAIL, as no callers want it (nor are likely to),
and it complicates the error handling of the function.
When no name is requested, the angle brackets (<>) around
the email address are also omitted.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When peeking into object stores of submodules, the code forgot that they
might borrow objects from alternate object stores on their own.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
|
|
There are no more callers who want this, so we can drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no reason anybody outside of ident.c should access
these directly (they should use the new accessors which make
sure the variables are initialized), so we can make them
file-scope statics.
While we're at it, move user_ident_explicitly_given into
ident.c; while still globally visible, it makes more sense
to reside with the ident code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no reason for this to be in config, except that once
upon a time all of the config parsing was there. It makes
more sense to keep the ident code together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function sets up the default name, email, and date, and
is not publicly available. Let's split it into three public
functions so that callers can get just the parts they need.
While we're at it, let's change the interface to simple
accessors. The original function was called only by fmt_ident,
and contained logic for "if we already have some other
value, don't load the default" which properly belongs in
fmt_ident.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
|
|
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
|
|
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
|
|
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
|
|
When PATH contains an unreadable directory, alias expansion code did not
kick in, and failed with an error that said "git-subcmd" was not found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
|
|
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
|
|
"git commit --author=$name" did not tell the name that was being recorded
in the resulting commit to hooks, even though it does do so when the end
user overrode the authorship via the "GIT_AUTHOR_NAME" environment
variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
|
|
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the code to write the index in the v4 on-disk format.
Record the format version of the on-disk index we read from in the
index_state, and use the format when writing the new index out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The on-disk format of the index file is a detail whose implementation is
neatly encapsulated in read-cache.c; there is no need to expose it to the
general public that include the cache.h header file.
Also add a prominent mark to read-cache.c to delineate the parts that deal
with the index file I/O routines from the remainder of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each ref structure contains a "nonfastforward" field which
is set during push to show whether the ref rewound history.
Originally this was a single bit, but it was changed in
f25950f (push: Provide situational hints for non-fast-forward
errors) to an enum differentiating a non-ff of the current
branch versus another branch.
However, we never actually set the member according to the
enum values, nor did we ever read it expecting anything but
a boolean value. But we did use the side effect of declaring
the enum constants to store those values in a totally
different integer variable. The code as-is isn't buggy, but
the enum declaration inside "struct ref" is somewhat
misleading.
Let's convert nonfastforward back into a single bit, and
then define the NON_FF_* constants closer to where they
would be used (they are returned via the "int *nonfastforward"
parameter to transport_push, so we can define them there).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The read-cache implementation defines this static function,
but it is a generally useful concept in git. Let's give
the empty blob the same treatment as the empty tree,
providing both hex and binary forms of the sha1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit formatting logic format_person_part() in pretty.c
implements the logic to split an author/committer ident line into
its parts, intermixed with logic to compute its output using these
piece it computes.
Separate the former out to a helper function split_ident_line() so
that other codepath can use the same logic, and rewrite the function
using the helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By Jared Hance
* jh/threadable-symlink-check:
Add threaded versions of functions in symlinks.c.
|
|
check_leading_path() and has_dirs_only_path() both always use the default
cache, which could be a caveat for adding parallelism (which is a concern
and even a GSoC proposal).
Reimplement these two in terms of new threaded_check_leading_path() and
threaded_has_dirs_only_path() that take their own copy of the cache.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/config-include:
: An assignment to the include.path pseudo-variable causes the named file
: to be included in-place when Git looks up configuration variables.
config: add include directive
config: eliminate config_exclusive_filename
config: stop using config_exclusive_filename
config: provide a version of git_config with more options
config: teach git_config_rename_section a file argument
config: teach git_config_set_multivar_in_file a default path
config: copy the return value of prefix_filename
t1300: add missing &&-chaining
docs/api-config: minor clarifications
docs: add a basic description of the config API
|
|
* jk/git-dir-lookup:
standardize and improve lookup rules for external local repos
|
|
* zj/term-columns:
pager: find out the terminal width before spawning the pager
|
|
* zj/decimal-width:
make lineno_width() from blame reusable for others
Conflicts:
cache.h
pager.c
|
|
* zj/term-columns:
pager: find out the terminal width before spawning the pager
|
|
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a magic global variable that was intended as an
override to the usual git-config lookup process. Once upon a
time, you could specify GIT_CONFIG to any git program, and
it would look only at that file. This turned out to be
confusing and cause a lot of bugs for little gain. As a
result, dc87183 (Only use GIT_CONFIG in "git config", not
other programs, 2008-06-30) took this away for all callers
except git-config.
Since git-config no longer uses it either, the variable can
just go away. As the diff shows, nobody was setting to
anything except NULL, so we can just replace any sites where
it was read with NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers may want to provide a specific version of a file in which to look
for config. Right now this can be done by setting the magic global
config_exclusive_filename variable. By providing a version of git_config
that takes a filename, we can take a step towards making this magic global
go away.
Furthermore, by providing a more "advanced" interface, we now have a a
natural place to add new options for callers like git-config, which care
about tweaking the specifics of config lookup, without disturbing the
large number of "simple" users (i.e., every other part of git).
The astute reader of this patch may notice that the logic for handling
config_exclusive_filename was taken out of git_config_early, but added
into git_config. This means that git_config_early will no longer respect
config_exclusive_filename. That's OK, because the only other caller of
git_config_early is check_repository_format_gently, but the only function
which sets config_exclusive_filename is cmd_config, which does not call
check_repository_format_gently (and if it did, it would have been a bug,
anyway, as we would be checking the repository format in the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The other config-writing functions (git_config_set and
git_config_set_multivar) each have an -"in_file" version to
write a specific file. Let's add one for rename_section,
with the eventual goal of moving away from the magic
config_exclusive_filename global.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/blame.c has a helper function to compute how many columns
we need to show a line-number, whose implementation is reusable as
a more generic helper function to count the number of columns
necessary to show any cardinal number.
Rename it to decimal_width(), move it to pager.c and export it for
use by future callers.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/git-dir-lookup:
standardize and improve lookup rules for external local repos
|
|
term_columns() checks for terminal width via ioctl(2) on the standard
output, but we spawn the pager too early for this check to be useful.
The effect of this buglet can be observed by opening a wide terminal and
running "git -p help --all", which still shows 80-column output, while
"git help --all" uses the full terminal width. Run the check before we
spawn the pager to fix this.
While at it, move term_columns() to pager.c and export it from cache.h so
that callers other than the help subsystem can use it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have been carefully choosing feature names used in the protocol
extensions so that the vocabulary does not contain a word that is a
substring of another word, so it is not a real problem, but we have
recently added "quiet" feature word, which would mean we cannot later
add some other word with "quiet" (e.g. "quiet-push"), which is awkward.
Let's make sure that we can eventually be able to do so by teaching the
clients and servers that feature words consist of non whitespace
letters. This parser also allows us to later add features with parameters
e.g. "feature=1.5" (parameter values need to be quoted for whitespaces,
but we will worry about the detauls when we do introduce them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
|
|
* mh/ref-api:
add_ref(): take a (struct ref_entry *) parameter
create_ref_entry(): extract function from add_ref()
repack_without_ref(): remove temporary
resolve_gitlink_ref_recursive(): change to work with struct ref_cache
Pass a (ref_cache *) to the resolve_gitlink_*() helper functions
resolve_gitlink_ref(): improve docstring
get_ref_dir(): change signature
refs: change signatures of get_packed_refs() and get_loose_refs()
is_dup_ref(): extract function from sort_ref_array()
add_ref(): add docstring
parse_ref_line(): add docstring
is_refname_available(): remove the "quiet" argument
clear_ref_array(): rename from free_ref_array()
refs: rename parameters result -> sha1
refs: rename "refname" variables
struct ref_entry: document name member
Conflicts:
cache.h
refs.c
|
|
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
|
|
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
|
|
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
|
|
This function was used for comparing local and remote ref
names during fetch (which makes it a candidate for "most
confusingly named function of the year").
It no longer has any callers, so let's get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Heiko Voigt
Matthieu Moy
Jonathan Nieder
Christopher Tiwald
Jared Hance
Zbigniew Jędrzejewski-Szmek
Nguyễn Thái Ngọc Duy