| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The function make_cache_entry() is too useful to be hidden away in
merge-recursive. So move it to libgit.a (exposing it via cache.h).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
convert_sha1_file() became unused by the previous patch -- remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
The read_tree() function is called only from the call chain to
run "git diff --cached" (this includes the internal call made by
git-runstatus to run_diff_index()). The function vacates stage
without any funky "merge" magic. The caller then goes and
compares stage #1 entries from the tree with stage #0 entries
from the original index.
When adding the cache entries this way, it used the general
purpose add_cache_entry(). This function looks for an existing
entry to replace or if there is none to find where to insert the
new entry, resolves D/F conflict and all the other things.
For the purpose of reading entries into an empty stage, none of
that processing is needed. We can instead append everything and
then sort the result at the end.
This commit changes read_tree() to first make sure that there is
no existing cache entries at specified stage, and if that is the
case, it runs add_cache_entry() with ADD_CACHE_JUST_APPEND flag
(new), and then sort the resulting cache using qsort().
This new flag tells add_cache_entry() to omit all the checks
such as "Does this path already exist? Does adding this path
remove other existing entries because it turns a directory to a
file?" and instead append the given cache entry straight at the
end of the active cache. The caller of course is expected to
sort the resulting cache at the end before using the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the function set_git_dir() you can reset the path that will
be used for git_path(), git_dir() and friends.
The responsibility to close files and throw away information from the
old git_dir lies with the caller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commit 'Add GIT_EDITOR environment and core.editor
configuration variables', this was done for the shell scripts.
Port it over to builtin-tag's version of launch_editor(), which
is just about to be refactored into editor.c.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new name is closer to the purpose of the function.
A NUL-terminated buffer makes things easier when callers need that.
Since the function returns only the memory written with data,
almost always allocating more space than needed because final
size is unknown, an extra NUL terminating the buffer is harmless.
It is not included in the returned size, so the function
remains working as before.
Also, now the function allows the buffer passed to be NULL at first,
and alloc_nr is now used for growing the buffer, instead size=*2.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These days, show_date() takes a date_mode parameter to specify
the output format, and a separate specialized function for dates
in E-mails does not make much sense anymore.
This retires show_rfc2822_date() function and make it just
another date output format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support output of full ISO 8601 style dates in e.g. git log
and other places that use interpolation for formatting.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split out the nnn{k,m,g} parsing code from git_config_int into
git_parse_long, so command-line parameters can enjoy the same
functionality. Also add get_parse_ulong for unsigned values.
Make git_config_int use git_parse_long, and add get_config_ulong
as well.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/quote:
Add core.quotepath configuration variable.
|
|
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
|
|
This patch arose from a discussion started by Jim Meyering's patch
whose intention was to provide better diagnostics for failed writes.
Linus proposed a better way to do things, which also had the added
benefit that adding a fflush() to git-log-* operations and incremental
git-blame operations could improve interactive respose time feel, at
the cost of making things a bit slower when we aren't piping the
output to a downstream program.
This patch skips the fflush() calls when stdout is a regular file, or
if the environment variable GIT_FLUSH is set to "0". This latter can
speed up a command such as:
GIT_FLUSH=0 strace -c -f -e write time git-rev-list HEAD | wc -l
a tiny amount.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ei/oneline+add-empty:
Fix ALLOC_GROW calls with obsolete semantics
Fix ALLOC_GROW off-by-one
builtin-add: simplify (and increase accuracy of) exclude handling
dir_struct: add collect_ignored option
Extend --pretty=oneline to cover the first paragraph,
Lift 16kB limit of log message output
|
|
The ALLOC_GROW macro will never let us fill the array completely,
instead allocating an extra chunk if that would be the case. This is
because the 'nr' argument was originally treated as "how much we do have
now" instead of "how much do we want". The latter makes much more
sense because you can grow by more than one item.
This off-by-one never resulted in an error because it meant we were
overly conservative about when to allocate. Any callers which passed
"how much we have now" need to be updated, or they will fail to allocate
enough.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There still are quite a few symbols that ought to be static.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
so that an ugly commit message like this can be
handled sanely.
Currently, --pretty=oneline and --pretty=email (hence
format-patch) take and use only the first line of the commit log
message. This changes them to:
- Take the first paragraph, where the definition of the first
paragraph is "skip all blank lines from the beginning, and
then grab everything up to the next empty line".
- Replace all line breaks with a whitespace.
This change would not affect a well-behaved commit message that
adheres to the convention of "single line summary, a blank line,
and then body of message", as its first paragraph always
consists of a single line. Commit messages from different
culture, such as the ones imported from CVS/SVN, can however get
chomped with the existing behaviour at the first linebreak in
the middle of sentence right now, which would become much easier
to see with this change.
The Subject: and --pretty=oneline output would become very long
and unsightly for non-conforming commits, but their messages are
already ugly anyway, and thischange at least avoids the loss of
information.
The Subject: line from a multi-line paragraph is folded using
RFC2822 line folding rules at the places where line breaks were
in the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is in preparation for keeping two entry lists in the
dir object.
This patch adds and uses the ALLOC_GROW() macro, which
implements the commonly used idiom of growing a dynamic
array using the alloc_nr function (not just in dir.c, but
everywhere).
We also move creation of a dir_entry to dir_entry_new.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/pack:
Style nit - don't put space after function names
Ensure the pack index is opened before access
Simplify index access condition in count-objects, pack-redundant
Test for recent rev-parse $abbrev_sha1 regression
rev-parse: Identify short sha1 sums correctly.
Attempt to delay prepare_alt_odb during get_sha1
Micro-optimize prepare_alt_odb
Lazily open pack index files on demand
|
|
* maint:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
|
|
* maint-1.5.1:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
|
|
Make hexval_table[] "const". Also make sure that the accessor
function hexval() does not access the table with out-of-range
values by declaring its parameter "unsigned char", instead of
"unsigned int".
With this, gcc can just generate:
movzbl (%rdi), %eax
movsbl hexval_table(%rax),%edx
movzbl 1(%rdi), %eax
movsbl hexval_table(%rax),%eax
sall $4, %edx
orl %eax, %edx
for the code to generate a byte from two hex characters.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* db/remote:
Move refspec pattern matching to match_refs().
Update local tracking refs when pushing
Add handlers for fetch-side configuration of remotes.
Move refspec parser from connect.c and cache.h to remote.{c,h}
Move remote parsing into a library file out of builtin-push.
|
|
In some repository configurations the user may have many packfiles,
but all of the recent commits/trees/tags/blobs are likely to
be in the most recent packfile (the one with the newest mtime).
It is therefore common to be able to complete an entire operation
by accessing only one packfile, even if there are 25 packfiles
available to the repository.
Rather than opening and mmaping the corresponding .idx file for
every pack found, we now only open and map the .idx when we suspect
there might be an object of interest in there.
Of course we cannot known in advance which packfile contains an
object, so we still need to scan the entire packed_git list to
locate anything. But odds are users want to access objects in the
most recently created packfiles first, and that may be all they
ever need for the current operation.
Junio observed in b867092f that placing recent packfiles before
older ones can slightly improve access times for recent objects,
without degrading it for historical object access.
This change improves upon Junio's observations by trying even harder
to avoid the .idx files that we won't need.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Unify naming of plumbing dirlink/gitlink concept:
git ls-files -z '*.[ch]' |
xargs -0 perl -pi -e 's/dirlink/gitlink/g;' -e 's/DIRLNK/GITLINK/g;'
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* dh/pack:
Custom compression levels for objects and packs
|
|
* mst/connect:
connect: display connection progress
|
|
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
|
|
As noted by Johan Herland, git-archive is a kind of checkout and needs
to apply any checkout filters that might be configured.
This patch adds the convenience function convert_sha1_file which returns
a buffer containing the object's contents, after converting, if necessary
(i.e. it's a combination of read_sha1_file and convert_to_working_tree).
Direct calls to read_sha1_file in git-archive are then replaced by calls
to convert_sha1_file.
Since convert_sha1_file expects its path argument to be NUL-terminated --
a convention it inherits from convert_to_working_tree -- the patch also
changes the path handling in archive-tar.c to always NUL-terminate the
string. It used to solely rely on the len field of struct strbuf before.
archive-zip.c already NUL-terminates the path and thus needs no such
change.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we are applying a patch that creates a blob at a path, or
when we are switching from a branch that does not have a blob at
the path to another branch that has one, we need to make sure
that there is nothing at the path in the working tree, as such a
file is a local modification made by the user that would be lost
by the operation.
Normally, lstat() on the path and making sure ENOENT is returned
is good enough for that purpose. However there is a twist. We
may be creating a regular file arch/x86_64/boot/Makefile, while
removing an existing symbolic link at arch/x86_64/boot that
points at existing ../i386/boot directory that has Makefile in
it. We always first check without touching filesystem and then
perform the actual operation, so when we verify the new file,
arch/x86_64/boot/Makefile, does not exist, we haven't removed
the symbolic link arc/x86_64/boot symbolic link yet. lstat() on
the file sees through the symbolic link and reports the file is
there, which is not what we want.
The function has_symlink_leading_path() function takes a path,
and sees if any of the leading directory component is a symbolic
link.
When files in a new directory are created, we tend to process
them together because both index and tree are sorted. The
function takes advantage of this and allows the caller to cache
and reuse which symbolic link on the filesystem caused the
function to return true.
The calling sequence would be:
char last_symlink[PATH_MAX];
*last_symlink = '\0';
for each index entry {
if (!lose)
continue;
if (lstat(it))
if (errno == ENOENT)
; /* happy */
else
error;
else if (has_symlink_leading_path(it, last_symlink))
; /* happy */
else
error; /* would lose local changes */
unlink_entry(it, last_symlink);
}
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/the-index:
Make read-cache.c "the_index" free.
Move index-related variables into a structure.
|
|
get_sha1_with_mode basically behaves as get_sha1. It has an additional
parameter for storing the mode of the object.
If the mode can not be determined, it stores S_IFINVALID.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
S_IFINVALID is used to signal, that no mode information is available.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes all low-level functions defined in read-cache.c to
take an explicit index_state structure as their first parameter,
to specify which index to work on. These functions
traditionally operated on "the_index" and were named foo_cache();
the counterparts this patch introduces are called foo_index().
The traditional foo_cache() functions are made into macros that
give "the_index" to their corresponding foo_index() functions.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This defines a index_state structure and moves index-related
global variables into it. Currently there is one instance of
it, the_index, and everybody accesses it, so there is no code
change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* 'lt/objalloc':
Clean up object creation to use more common code
Use proper object allocators for unknown object nodes too
|
Carlos Rica
René Scharfe
Junio C Hamano
Alexandre Julliard
Johannes Schindelin
Robin Rosenberg
Brian Downing
Brian Gernhardt
Theodore Ts'o
Jeff King
Matthias Lederhofer
Junio C Hamano
Linus Torvalds
Shawn O. Pearce
Martin Waitz
Daniel Barkalow
Michael S. Tsirkin
Dana How
Nicolas Pitre
Luiz Fernando N. Capitulino
Martin Koegler