| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* bp/reset-quiet:
reset: warn when refresh_index() takes more than 2 seconds
reset: add new reset.quiet config setting
reset: don't compute unstaged changes after reset when --quiet
* js/mingw-http-ssl:
http: when using Secure Channel, ignore sslCAInfo by default
http: add support for disabling SSL revocation checks in cURL
http: add support for selecting SSL backends at runtime
|
|
"git cmd --help" when "cmd" is aliased used to only say "cmd is
aliased to ...". Now it shows that to the standard error stream
and runs "git $cmd --help" where $cmd is the first word of the
alias expansion.
This could be misleading for those who alias a command with options
(e.g. with "[alias] cpn = cherry-pick -n", "git cpn --help" would
show the manual of "cherry-pick", and the reader would not be told
to pay close attention to the part that describes the "--no-commit"
option until closing the pager that showed the contents of the
manual, if the pager is configured to restore the original screen,
or would not be told at all, if the pager simply makes the message
on the standard error scroll away.
* rv/alias-help:
git-help.txt: document "git help cmd" vs "git cmd --help" for aliases
git.c: handle_alias: prepend alias info when first argument is -h
help: redirect to aliased commands for "git cmd --help"
|
|
refresh_index() is done after a reset command as an optimization. Because
it can be an expensive call, warn the user if it takes more than 2 seconds
and tell them how to avoid it using the --quiet command line option or
reset.quiet config setting.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a reset.quiet config setting that sets the default value of the --quiet
flag when running the reset command. This enables users to change the
default behavior to take advantage of the performance advantages of
avoiding the scan for unstaged changes after reset. Defaults to false.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git reset is run with the --quiet flag, don't bother finding any
additional unstaged changes as they won't be output anyway. This speeds up
the git reset command by avoiding having to lstat() every file looking for
changes that aren't going to be reported anyway.
The savings can be significant. In a repo on Windows with 200K files
"git reset" drops from 7.16 seconds to 0.32 seconds for a savings of 96%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing into a repository that borrows its objects from an
alternate object store, "git receive-pack" that responds to the
push request on the other side lists the tips of refs in the
alternate to reduce the amount of objects transferred. This
sometimes is detrimental when the number of refs in the alternate
is absurdly large, in which case the bandwidth saved in potentially
fewer objects transferred is wasted in excessively large ref
advertisement. The alternate refs that are advertised are now
configurable with a pair of configuration variables.
* tb/filter-alternate-refs:
transport.c: introduce core.alternateRefsPrefixes
transport.c: introduce core.alternateRefsCommand
transport.c: extract 'fill_alternate_refs_command'
transport: drop refnames from for_each_alternate_ref
|
|
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
|
|
Code clean-up.
* ds/commit-graph-leakfix:
commit-graph: reduce initial oid allocation
builtin/commit-graph.c: UNLEAK variables
commit-graph: clean up leaked memory during write
|
|
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
* rs/grep-no-recursive:
grep: add -r/--[no-]recursive
|
|
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
|
|
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
|
|
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
|
|
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Code clean-up.
* jk/oideq-hasheq-cleanup:
more oideq/hasheq conversions
|
|
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
|
|
Comment fix.
* jk/check-everything-connected-is-long-gone:
receive-pack: update comment with check_everything_connected
|
|
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
|
|
Code clean-up.
* jn/gc-auto-prep:
gc: exit with status 128 on failure
gc: improve handling of errors reading gc.log
|
|
Fix interactions between two recent topics.
* jk/delta-islands-with-bitmap-reuse-delta-fix:
pack-objects: handle island check for "external" delta base
|
|
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
|
|
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
|
|
As discussed in the thread for v1 of this patch [1] [2], this changes the
rules for "git foo --help" when foo is an alias.
(1) When invoked as "git help foo", we continue to print the "foo is
aliased to bar" message and nothing else.
(2) If foo is an alias for a shell command, print "foo is aliased to
!bar" as usual.
(3) Otherwise, print "foo is aliased to bar" to the standard error
stream, and then break the alias string into words and pretend as if
"git word[0] --help" were called.
Getting the man page for git-cherry-pick directly with "git cp --help"
is consistent with "--help" generally providing more comprehensive help
than "-h". Printing the alias definition to stderr means that in certain
cases (e.g. if help.format=web or if the pager uses an alternate screen
and does not clear the terminal), one has
'cp' is aliased to 'cherry-pick -n'
above the prompt when one returns to the terminal/quits the pager, which
is a useful reminder that using 'cp' has some flag implicitly set. There
are cases where this information vanishes or gets scrolled
away, but being printed to stderr, it should never hurt.
[1] https://public-inbox.org/git/20180926102636.30691-1-rv@rasmusvillemoes.dk/
[2] https://public-inbox.org/git/20180926184914.GC30680@sigill.intra.peff.net/
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git multi-pack-index" learned to detect corruption in the .midx
file it uses, and this feature has been integrated into "git fsck".
* ds/multi-pack-verify:
fsck: verify multi-pack-index
multi-pack-index: report progress during 'verify'
multi-pack-index: verify object offsets
multi-pack-index: fix 32-bit vs 64-bit size check
multi-pack-index: verify oid lookup order
multi-pack-index: verify oid fanout order
multi-pack-index: verify missing pack
multi-pack-index: verify packname order
multi-pack-index: verify corrupt chunk lookup table
multi-pack-index: verify bad header
multi-pack-index: add 'verify' verb
|
|
None of the current callers use the refname parameter we pass to their
callbacks. In theory somebody _could_ do so, but it's actually quite
weird if you think about it: it's a ref in somebody else's repository.
So the name has no meaning locally, and in fact there may be duplicates
if there are multiple alternates.
The users of this interface really only care about seeing some ref tips,
since that promises that the alternate has the full commit graph
reachable from there. So let's keep the information we pass back to the
bare minimum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If only hash literals are given on a "git fetch" command-line, tag
following is not requested, and the fetch is done using protocol v2, a
list of refs is not required from the remote. Therefore, optimize by
invoking transport_get_remote_refs() only if we need the refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`graph_verify()`, `graph_read()` and `graph_write()` do the hard work of
`cmd_commit_graph()`. As soon as these return, so does
`cmd_commit_graph()`.
`strbuf_getline()` may allocate memory in the strbuf, yet return EOF.
We need to release the strbuf or UNLEAK it. Go for the latter since we
are close to returning from `graph_write()`.
`graph_write()` also fails to free the strings in the string list. They
have been added to the list with `strdup_strings` set to 0. We could
flip `strdup_strings` before clearing the list, which is our usual hack
in situations like this. But since we are about to exit, let's just
UNLEAK the whole string list instead.
UNLEAK `graph` in `graph_verify`. While at it, and for consistency,
UNLEAK in `graph_read()` as well, and remove an unnecessary UNLEAK just
before dying.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added faster equality-comparison functions for hashes in
14438c4497 (introduce hasheq() and oideq(), 2018-08-28). A
few topics were in-flight at the time, and can now be
converted. This covers all spots found by "make coccicheck"
in master (the coccicheck results were tweaked by hand for
style).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
[1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recognize -r and --recursive as synonyms for --max-depth=-1 for
compatibility with GNU grep; it's still the default for git grep.
This also adds --no-recursive as synonym for --max-depth=0 for free,
which is welcome for completeness and consistency.
Fix the description for --max-depth, while we're at it -- negative
values other than -1 actually disable recursion, i.e. they are
equivalent to --max-depth=0.
Requested-by: Christoph Berg <myon@debian.org>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit
176ea7479309 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca9c ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That function is now called "check_connected()", but we forgot to update
this comment in 7043c7071c (check_everything_connected: use a struct
with named options, 2016-07-15).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git update-ref" learned to make both "--no-deref" and "--stdin"
work at the same time.
* en/update-ref-no-deref-stdin:
update-ref: allow --no-deref with --stdin
update-ref: fix type of update_flags variable to match its usage
|
|
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
|
|
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
|
|
Code clean-up.
* en/double-semicolon-fix:
Remove superfluous trailing semicolons
|
|
Code clean-up.
* tb/void-check-attr:
Make git_check_attr() a void function
|
|
When fetching an object that is known as a promisor object to the local
repository, the connectivity check in quickfetch() in builtin/fetch.c
succeeds, causing object transfer to be bypassed. However, this should
not happen if that object is merely promised and not actually present.
Because this happens, when a user invokes "git fetch origin <sha-1>" on
the command-line, the <sha-1> object may not actually be fetched even
though the command returns an exit code of 0. This is a similar issue
(but with a different cause) to the one fixed by a0c9016abd
("upload-pack: send refs' objects despite "filter"", 2018-07-09).
Therefore, update quickfetch() to also directly check for the presence
of all objects to be fetched. Its documentation and name are also
updated to better reflect what it does.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ben Peart
Rasmus Villemoes
Jeff King
Jonathan Tan
Martin Ågren
Stephen P. Smith
René Scharfe
Nguyễn Thái Ngọc Duy
Elijah Newren