| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previously suggested workflow:
git sparse-checkout init ...
git sparse-checkout set ...
Suffered from three problems:
1) It would delete nearly all files in the first step, then
restore them in the second. That was poor performance and
forced unnecessary rebuilds.
2) The two-step process resulted in two progress bars, which
was suboptimal from a UI point of view for wrappers that
invoked both of these commands but only exposed a single
command to their end users.
3) With cone mode, the first step would delete nearly all
ignored files everywhere, because everything was considered
to be outside of the specified sparsity paths. (The user was
not allowed to specify any sparsity paths in the `init` step.)
Avoid these problems by teaching `set` to understand the extra
parameters that `init` takes and performing any necessary initialization
if not already in a sparse checkout.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init` has some code for handling updates to either cone mode or
the sparse-index setting. We would like to be able to reuse this
elsewhere, namely in `set` and `reapply`. Split this function out,
and make it slightly more general so it can handle being called from
the new callers.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We intentionally added --stdin as an option to `sparse-checkout set`,
but didn't intend for --no-stdin to be permitted as well.
Reported-by: Victoria Dye <vdye@github.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sparse_checkout_set() was reused by sparse_checkout_add() with the only
difference being a single parameter being passed to that function.
However, we would like sparse_checkout_set() to do the same work that
sparse_checkout_init() does if sparse checkouts are not already enabled.
To facilitate this transition, give each mode their own copy of the
function. This does not introduce any behavioral changes; that will
come in a subsequent patch.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
add_patterns_from_input() has relied on a global variable,
set_opts.use_stdin, which has been used by both the `set` and `add`
subcommands of sparse-checkout. Once we introduce an
add_opts.use_stdin, the hardcoding of set_opts.use_stdin will be
incorrect. Pass the value as function parameter instead to allow us to
make subsequent changes.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* tb/plug-pack-bitmap-leaks:
pack-bitmap.c: more aggressively free in free_bitmap_index()
pack-bitmap.c: don't leak type-level bitmaps
midx.c: write MIDX filenames to strbuf
builtin/multi-pack-index.c: don't leak concatenated options
builtin/repack.c: avoid leaking child arguments
builtin/pack-objects.c: don't leak memory via arguments
t/helper/test-read-midx.c: free MIDX within read_midx_file()
midx.c: don't leak MIDX from verify_midx_file
midx.c: clean up chunkfile after reading the MIDX
|
|
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
|
|
"git stash" learned the "--staged" option to stash away what has
been added to the index (and nothing else).
* so/stash-staged:
stash: get rid of unused argument in stash_staged()
stash: implement '--staged' option for 'push' and 'save'
|
|
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
|
|
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
|
|
In the preceding commit a free() of uninitialized memory regression in
96e41f58fe1 (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e0 (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbec (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f92104 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e564 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
1. https://valgrind.org/docs/manual/mc-manual.html#mc-manual.leaks
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git maintenance run" learned to use system supplied scheduler
backend, but cron on macOS turns out to be unusable for this
purpose.
* ds/no-usable-cron-on-macos:
maintenance: disable cron on macOS
|
|
"git pull --ff-only" and "git pull --rebase --ff-only" should make
it a no-op to attempt pulling from a remote that is behind us, but
instead the command errored out by saying it was impossible to
fast-forward, which may technically be true, but not a useful thing
to diagnose as an error. This has been corrected.
* jc/fix-pull-ff-only-when-already-up-to-date:
pull: --ff-only should make it a noop when already-up-to-date
|
|
In eba1ba9 (maintenance: `git maintenance run` learned
`--scheduler=<scheduler>`, 2021-09-04), we introduced the ability to
specify a scheduler explicitly. This led to some extra checks around
whether an alternative scheduler was available. This added the
functionality of removing background maintenance from schedulers other
than the one selected.
On macOS, cron is technically available, but running 'crontab' triggers
a UI prompt asking for special permissions. This is the major reason why
launchctl is used as the default scheduler. The is_crontab_available()
method triggers this UI prompt, causing user disruption.
Remove this disruption by using an #ifdef to prevent running crontab
this way on macOS. This has the unfortunate downside that if a user
manually selects cron via the '--scheduler' option, then adjusting the
scheduler later will not remove the schedule from cron. The
'--scheduler' option ignores the is_available checks, which is how we
can get into this situation.
Extract the new check_crontab_process() method to avoid making the
'child' variable unused on macOS. The method is marked MAYBE_UNUSED
because it has no callers on macOS.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --no-verify" did not affect the underlying "git merge".
* ar/fix-git-pull-no-verify:
pull: honor --no-verify and do not call the commit-msg hook
|
|
Fixes to recently added messages.
* jx/message-fixes:
i18n: fix typos found during l10n for git 2.34.0
|
|
It is wrong to read some settings directly from the config
subsystem, as things like feature.experimental can affect their
default values.
* gc/use-repo-settings:
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
|
|
Teach "git commit-graph" command not to allow using replace objects
at all, as we do not use the commit-graph at runtime when we see
object replacement.
* ab/ignore-replace-while-working-on-commit-graph:
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
|
|
Emir and Jean-Noël reported typos in some i18n messages when preparing
l10n for git 2.34.0.
* Fix unstable spelling of config variable "gpg.ssh.defaultKeyCommand"
which was introduced in commit fd9e226776 (ssh signing: retrieve a
default key from ssh-agent, 2021-09-10).
* Add missing space between "with" and "--python" which was introduced
in commit bd0708c7eb (ref-filter: add %(raw) atom, 2021-07-26).
* Fix unmatched single quote in 'builtin/index-pack.c' which was
introduced in commit 8737dab346 (index-pack: refactor renaming in
final(), 2021-09-09)
[1] https://github.com/git-l10n/git-po/pull/567
Reported-by: Emir Sarı <bitigchi@me.com>
Reported-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message regression fix.
* ks/submodule-add-message-fix:
submodule: drop unused sm_name parameter from append_fetch_remotes()
submodule--helper: fix incorrect newlines in an error message
|
|
Leakfix.
* ab/plug-random-leaks:
reflog: free() ref given to us by dwim_log()
submodule--helper: fix small memory leaks
clone: fix a memory leak of the "git_dir" variable
grep: fix a "path_list" memory leak
grep: use object_array_clear() in cmd_grep()
grep: prefer "struct grep_opt" over its "void *" equivalent
|
|
"git for-each-ref" family of commands were leaking the ref_sorting
instances that hold sorting keys specified by the user; this has
been corrected.
* ab/ref-filter-leakfix:
branch: use ref_sorting_release()
ref-filter API user: add and use a ref_sorting_release()
tag: use a "goto cleanup" pattern, leak less memory
|
|
"git push" client talking to an HTTP server did not diagnose the
lack of the final status report from the other side correctly,
which has been corrected.
* jk/http-push-status-fix:
transport-helper: recognize "expecting report" error from send-pack
send-pack: complain about "expecting report" with --helper-status
|
|
Earlier, we made sure that "git pull --ff-only" (and "git -c
pull.ff=only pull") errors out when our current HEAD is not an
ancestor of the tip of the history we are merging, but the condition
to trigger the error was implemented incorrectly.
Imagine you forked from a remote branch, built your history on top
of it, and then attempted to pull from them again. If they have not
made any update in the meantime, our current HEAD is obviously not
their ancestor, and this new error triggers.
Without the --ff-only option, we just report that there is no need
to pull; we did the same historically with --ff-only, too.
Make sure we do not fail with the recently added check to restore
the historical behaviour.
Reported-by: Kenneth Arnold <ka37@calvin.edu>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `multi-pack-index` builtin dynamically allocates an array of
command-line option for each of its separate modes by calling
add_common_options() to concatante the common options with sub-command
specific ones.
Because this operation allocates a new array, we have to be careful to
remember to free it. We already do this in the repack and write
sub-commands, but verify and expire don't. Rectify this by calling
FREE_AND_NULL as the other modes do.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git repack` invokes a handful of child processes: one to write the
actual pack, and optionally ones to repack promisor objects and update
the MIDX.
Most of these are freed automatically by calling `start_command()` (which
invokes it on error) and `finish_command()` which calls it
automatically.
But repack_promisor_objects() can initialize a child_process, populate
its array of arguments, and then return from the function before even
calling start_command().
Make sure that the prepared list of arguments is freed by calling
child_process_clear() ourselves to avoid leaking memory along this path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unused 'ps' argument was a left-over from original copy-paste of
stash_patch(). Removed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option was incorrectly auto-translated to "--no-verify-signatures",
which causes the unexpected effect of the hook being called.
And an even more unexpected effect of disabling verification of signatures.
The manual page describes the option to behave same as the similarly
named option of "git merge", which seems to be the original intention
of this option in the "pull" command.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When constructing arguments to pass to setup_revision(), pack-objects
only frees the memory used by that array after calling
get_object_list().
Ensure that we call strvec_clear() whether or not we use the arguments
array by cleaning up whenever we exit the function (and rewriting one
early return to jump to a label which frees the memory and then
returns).
We could avoid setting this array up altogether unless we are in the
if-else block that calls get_object_list(), but setting up the argument
array is intermingled with lots of other side-effects, e.g.:
if (exclude_promisor_objects) {
use_internal_rev_list = 1;
fetch_if_missing = 0;
strvec_push(&rp, "--exclude-promisor-objects");
}
So it would be awkward to check exclude_promisor_objects twice: first to
set use_internal_rev_list and fetch_if_missing, and then again above
get_object_list() to push the relevant argument onto the array.
Instead, leave the array's construction alone and make sure to free it
unconditionally.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit c21fb4676f (submodule--helper: fix incorrect newlines in an error
message, 2021-10-23) accidentally added a new, unused parameter while
changing the name and signature of show_fetch_remotes() to
append_fetch_remotes(). We can drop this to keep things simpler (and
satisfy -Wunused-parameter).
The error is likely because c21fb4676f is fixing a problem from
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10). An earlier iteration of that second commit introduced the
same unused parameter (though it was dropped before it finally made it
to 'next'), and the fix on top accidentally carried forward the extra
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ab/pkt-line-cleanup:
pkt-line.[ch]: remove unused packet_read_line_buf()
pkt-line.[ch]: remove unused packet_buf_write_len()
|
|
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
|
|
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
|
|
Use ssh public crypto for object and push-cert signing.
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
|
|
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
|
|
A refactoring[1] done as part of the recent conversion of
'git submodule add' to builtin, changed the error message
shown when a Git directory already exists locally for a submodule
name. Before the refactoring, the error used to appear like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
After the refactoring the error started appearing like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s): origin /me/git-repos-for-test/sub
fatal: If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or if you are unsure what this means, choose another name with the '--name' option.
--- END OF OUTPUT ---
As one could observe the remote information is printed along with the
first line rather than on its own line. Also, there's an additional
newline following output.
Make the error message consistent with the error message that used to be
printed before the refactoring.
This also moves the 'fatal:' prefix that appears in the middle of the
error message to the first line as it would more appropriate to have
it in the first line. The output after the change would look like:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
fatal: A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
[1]: https://lore.kernel.org/git/20210710074801.19917-5-raykar.ath@gmail.com/#t
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When dwim_log() returns the "ref" is always ether NULL or an
xstrdup()'d string.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a missing strbuf_release() and a clear_pathspec() to the
submodule--helper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At this point in cmd_clone the "git_dir" is always either an
xstrdup()'d string, or something we got from mkpathdup(). Let's free()
it before we clobber it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Free the "path_list" used in builtin/grep.c, it was declared as
STRING_LIST_INIT_NODUP, let's change it to a STRING_LIST_INIT_DUP
since an early user in cmd_grep() appends a string passed via
parse-options.c to it, which needs to be duplicated.
Let's then convert the remaining callers to use
string_list_append_nodup() instead, allowing us to free the list.
This makes all the tests in t7811-grep-open.sh pass, 6/10 would fail
before this change. The only remaining failure would have been due to
a stray "git checkout" (which still leaks memory). In this case we can
use a "git reset --hard" instead, so let's do that, and move the
test_when_finished() above the code that would modify the relevant
file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Free the "struct object_array" before exiting. This makes grep tests
(e.g. "t7815-grep-binary.sh") a bit happer under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stylistically fix up code added in bfac23d9534 (grep: Fix two memory
leaks, 2010-01-30). We usually don't use the "arg" at all once we've
casted it to the struct we want, let's not do that here when we're
freeing it. Perhaps it was thought that a cast to "void *" would
otherwise be needed?
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The for-each-ref family of commands invoke parsers immediately when
it sees each --sort=<atom> option, and die before even seeing the
other options on the command line when the <atom> is unrecognised.
Instead, accumulate them in a string list, and have them parsed into
a ref_sorting structure after the command line parsing is done. As
a consequence, "git branch --sort=bogus -h" used to fail to give the
brief help, which arguably may have been a feature, now does so,
which is more consistent with how other options work.
The patch is smaller than the actual extent of the "damage" to the
codebase, thanks to the fact that the original code consistently
used OPT_REF_SORT() macro to handle command line options. We only
needed to replace the variable used for the list, and implementation
of the callback function used in the macro.
The old rule was for the users of the API to:
- Declare ref_sorting and ref_sorting_tail variables;
- OPT_REF_SORT() macro will instantiate ref_sorting instance (which
may barf and die) and append it to the tail;
- Append to the tail each ref_sorting read from the configuration
by parsing in the config callback (which may barf and die);
- See if ref_sorting is null and use ref_sorting_default() instead.
Now the rule is not all that different but is simpler:
- Declare ref_sorting_options string list.
- OPT_REF_SORT() macro will append it to the string list;
- Append to the string list the sort key read from the
configuration;
- call ref_sorting_options() to turn the string list to ref_sorting
structure (which also deals with the default value).
As side effects, this change also cleans up a few issues:
- 95be717c (parse_opt_ref_sorting: always use with NONEG flag,
2019-03-20) muses that "git for-each-ref --no-sort" should simply
clear the sort keys accumulated so far; it now does.
- The implementation detail of "struct ref_sorting" and the helper
function parse_ref_sorting() can now be private to the ref-filter
API implementation.
- If you set branch.sort to a bogus value, the any "git branch"
invocation, not only the listing mode, would abort with the
original code; now it doesn't
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a ref_sorting_release() in branch.c to free the memory from the
ref_sorting_options(). This plugs the final in-tree memory leak of
that API.
In the preceding commit the "sorting" variable was left in the
cmd_branch() scope, even though that wasn't needed anymore. Move it to
the "else if (list)" scope instead. We can also move the "struct
string_list" only used for that branch to be declared in that block
That "struct ref_sorting" does not need to be "static" (and isn't
re-used). The "ref_sorting_options()" will return a valid one, we
don't need to make it "static" to have it zero'd out. That it was
static was another artifact of the pre-image of the preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a ref_sorting_release() and use it for some of the current API
users, the ref_sorting_default() function and its siblings will do a
malloc() which wasn't being free'd previously.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change cmd_tag() to free its "struct strbuf"'s instead of using an
UNLEAK() pattern. This changes code added in 886e1084d78 (builtin/:
add UNLEAKs, 2017-10-01).
As shown in the context of the declaration of the "struct
msg_arg" (which I'm changing to use a designated initializer while at
it, and to show the context in this change), that struct is just a
thin wrapper around an int and "struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
|
|
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
|
Elijah Newren
Junio C Hamano
Erwin Villejo
Ævar Arnfjörð Bjarmason
Derrick Stolee
Jiang Xin
Taylor Blau
Sergey Organov
Alex Riesen
Jeff King
Kaartic Sivaraam