| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
|
|
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
|
|
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
|
|
Code clean-up (not a leak-fix).
* sb/prefix-path-free-results:
prefix_path(): unconditionally free results in the callers
|
|
Some error messages in "git config" were emitted without calling
the usual error() facility.
* jn/clean-use-error-not-fprintf-on-stderr:
config: use error() instead of fprintf(stderr, ...)
|
|
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
|
|
* jc/plug-fmt-merge-msg-leak:
fmt-merge-msg: plug small leak of commit buffer
|
|
Memory usage of "git index-pack" has been trimmed by tens of
per-cent.
* nd/slim-index-pack-memory-usage:
index-pack: kill union delta_base to save memory
index-pack: reduce object_entry size to save memory
|
|
* jk/sha1-file-reduce-useless-warnings:
sha1_file: squelch "packfile cannot be accessed" warnings
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
|
|
* ts/checkout-advice-plural:
checkout: call a single commit "it" intead of "them"
|
|
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
|
|
"git show-branch --topics HEAD" (with no other arguments) did not
do anything interesting. Instead, contrast the given revision
against all the local branches by default.
* mh/show-branch-topic:
show-branch: show all local heads when only giving one rev along --topics
|
|
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
|
|
As of d089ebaa (setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28), prefix_path() always returns a
newly allocated string, so callers should free its result.
Additionally, drop the const from variables to which the result of
the prefix_path() is assigned, so they can be free()'d without
having to cast-away the constness.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The die() / error() / warning() helpers put a fatal: / error: /
warning: prefix in front of the error message they print describing
the message's severity, which users are likely to be accustomed to
seeing these days.
This change will also be useful when marking the message for
translation: the argument to error() includes no newline at the end,
so it is less fussy for translators to translate without lines running
together in the translated output.
While we're here, start the error messages with a lowercase letter to
match the usual typography of error messages.
A quick web search and a code search at codesearch.debian.net finds no
scripts trying to parse these error messages, so this change should be
safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A typical setup under Windows is to set core.eol to CRLF, and text
files are marked as "text" in .gitattributes, or core.autocrlf is
set to true.
After 4d4813a5 "git blame" no longer works as expected for such a
set-up. Every line is annotated as "Not Committed Yet", even though
the working directory is clean. This is because the commit removed
the conversion in blame.c for all files, with or without CRLF in the
repo.
Having files with CRLF in the repo and core.autocrlf=input is a
temporary situation, and the files, if committed as is, will be
normalized in the repo, which _will_ be a notable change. Blaming
them with "Not Committed Yet" is the right result. Revert commit
4d4813a5 which was a misguided attempt to "solve" a non-problem.
Add two test cases in t8003 to verify the correct CRLF conversion.
Suggested-By: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ps/grep-help-all-callback-arg:
grep: correctly initialize help-all option
|
|
A broken or badly formatted commit might not record author or
committer lines or we may not find a valid name on them. The
function record_person() returned after calling get_commit_buffer()
without calling unuse_commit_buffer() on the memory it obtained in
such cases, potentially leaking it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once we know the number of objects in the input pack, we allocate an
array of nr_objects of struct delta_entry. On x86-64, this struct is
32 bytes long. The union delta_base, which is part of struct
delta_entry, provides enough space to store either ofs-delta (8 bytes)
or ref-delta (20 bytes).
Because ofs-delta encoding is more efficient space-wise and more
performant at runtime than ref-delta encoding, Git packers try to use
ofs-delta whenever possible, and it is expected that objects encoded
as ref-delta are minority.
In the best clone case where no ref-delta object is present, we waste
(20-8) * nr_objects bytes because of this union. That's about 38MB out
of 100MB for deltas[] with 3.4M objects, or 38%. deltas[] would be
around 62MB without the waste.
This patch attempts to eliminate that. deltas[] array is split into
two: one for ofs-delta and one for ref-delta. Many functions are also
duplicated because of this split. With this patch, ofs_deltas[] array
takes 51MB. ref_deltas[] should remain unallocated in clone case (0
bytes). This array grows as we see ref-delta. We save about half in
this case, or 25% of total bookkeeping.
The saving is more than the calculation above because some padding in
the old delta_entry struct is removed. ofs_delta_entry is 16 bytes,
including the 4 bytes padding. That's 13MB for padding, but packing
the struct could break platforms that do not support unaligned
access. If someone on 32-bit is really low on memory and only deals
with packs smaller than 2G, using 32-bit off_t would eliminate the
padding and save 27MB on top.
A note about ofs_deltas allocation. We could use ref_deltas memory
allocation strategy for ofs_deltas. But that probably just adds more
overhead on top. ofs-deltas are generally the majority (1/2 to 2/3) in
any pack. Incremental realloc may lead to too many memcpy. And if we
preallocate, say 1/2 or 2/3 of nr_objects initially, the growth rate
of ALLOC_GROW() could make this array larger than nr_objects, wasting
more memory.
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name (not user) and email setting should be in config section
"user" and not in "core" as documented in Documentation/config.txt.
Signed-off-by: Ossi Herrala <oherrala@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 2bf15a3330a26183adc8563dbeeacc11294b8a01, whose
intention was good, but the verbosity levels used in merge-recursive
turns out to be rather uneven. For example, a merge of two branches
with conflicting submodule updates used to report CONFLICT: output
with --quiet but no longer (which *is* desired), while the final
"Automatic merge failed; fix conflicts and then commit" message is
still shown even with --quiet (which *is* inconsistent).
Originally reported by Bryan Turner; it is too early to declare what
the concensus is, but it seems that we would need to level the
verbosity levels used in merge strategy backends before we can go
forward. In the meantime, we'd revert to the old behaviour until
that happens.
cf. $gmane/267245
|
|
"git merge --quiet" did not squelch messages from the underlying
merge-recursive strategy.
* jk/merge-quiet:
merge: pass verbosity flag down to merge-recursive
|
|
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
|
|
The "help-all" option is being initialized with a wrong value.
While being semantically wrong this can also cause a segmentation
fault in gcc on ARMv7 hardfloat platforms with a hardened
toolchain. Fix this by initializing with a NULL value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When detached and checking out a branch again, git checkout warns
about commit(s) that might get lost. It says "If you want to keep
them ..." even for only one commit.
Use Q_() to allow differentiating singular vs plural.
Signed-off-by: Thomas Schneider <thosch97@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes "git merge --quiet" really quiet when we call
into merge-recursive.
Note that we can't just pass our flag down as-is; the two
parts of the code use different scales. We center at "0" as
normal for git-merge (with "--quiet" giving a negative
value), but merge-recursive uses "2" as its center. This
patch passes a negative value to merge-recursive rather than
"1", though, as otherwise the user would have to use "-qqq"
to squelch all messages (but the downside is that the user
cannot distinguish between levels 0-2 if without resorting
to the GIT_MERGE_VERBOSITY variable).
We may want to review and renormalize the message severities
in merge-recursive, but that does not have to happen now.
This is at least in improvement in the sense that we are
respecting "--quiet" at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you create a git repository in the root directory with
"git init /", we erroneously write a core.worktree entry.
This isn't _wrong_, in the sense that it's OK to set
core.worktree when we don't need to. But it is unnecessarily
surprising if you later move the .git directory to another
path (which usually moves the relative working tree, but is
foiled if there is an explicit worktree set).
The problem is that we check whether core.worktree is
necessary by seeing if we can make the git_dir by
concatenating "/.git" onto the working tree. That would lead
to "//.git" in this instance, but we actually have "/.git"
(without the doubled slash).
We can fix this by special-casing the root directory. I also
split the logic out into its own function to make the
conditional a bit more readable (and used skip_prefix, which
I think makes it a little more obvious what is going on).
No tests, as we would need to be able to write to "/" to do
so. I did manually confirm that:
sudo git init /
cd /
git rev-parse --show-toplevel
git config core.worktree
still finds the top-level correctly (as "/"), and does not
set any core.worktree variable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show-branch --topics <rev> <revs>..." displays ancestry graph, only
considering commits that are in all given revs, except the first one.
"git show-branch" displays ancestry graph for all local branches.
Unfortunately, "git show-branch --topics <rev>" only prints out the rev
info for the given rev, and nothing else, e.g.:
$ git show-branch --topics origin/master
[origin/master] Sync with 2.3.3
While there is an option to add all remote-tracking branches (-r), and
another to add all local+remote branches (-a), there is no option to add
only local branches. Adding such an option could be considered, but a
user would likely already expect that the above command line considers
the lack of rev other than for --topics as meaning all local branches,
like when there is no argument at all.
Moreover, when using -r and -a along with --topics, the first local or
remote-tracking branch, depending on alphabetic order is used instead of
the one given after --topics (any rev given on the command line is
actually simply ignored when either -r or -a is given). And if no rev is
given at all, the fact that the first alphetical branch is the base of
topics is probably not expected by users (Maybe --topics should always
require one rev on the command line?)
This change makes
"show-branch --topics $rev"
act as
"show-branch --topics $rev $(git for-each-ref refs/heads
--format='%(refname:short)')"
"show-branch -r --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/remotes
--format='%(refname:short)')"
and
"show-branch -a --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
|
|
Code clean-up.
* jc/report-path-error-to-dir:
report_path_error(): move to dir.c
|
|
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
|
|
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
|
|
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
|
|
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
|
|
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
oldlines is allocated earlier in the function and also freed on the
successful code path.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`old` is not used outside the loop and would get lost
once we reach the goto.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* sb/leaks:
builtin/help.c: fix memory leak
bundle.c: fix memory leak
connect.c: do not leak "conn" after showing diagnosis
|
|
Portability fixes and workarounds for shell scripts have been added
to help BSD-derived systems.
* km/bsd-shells:
t5528: do not fail with FreeBSD shell
help.c: use SHELL_PATH instead of hard-coded "/bin/sh"
git-compat-util.h: move SHELL_PATH default into header
git-instaweb: use @SHELL_PATH@ instead of /bin/sh
git-instaweb: allow running in a working tree subdirectory
|
Junio C Hamano
Paul Tan
Stefan Beller
Eric Sunshine
Jonathan Nieder
Torsten Bögershausen
Nguyễn Thái Ngọc Duy
Ossi Herrala
Patrick Steinhardt
Thomas Schneider
Jeff King
Mike Hommey
Max Kirillov