| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Abstract accesses to in-core revindex that allows enumerating
objects stored in a packfile in the order they appear in the pack,
in preparation for introducing an on-disk precomputed revindex.
* tb/pack-revindex-api: (21 commits)
for_each_object_in_pack(): clarify pack vs index ordering
pack-revindex.c: avoid direct revindex access in 'offset_to_pack_pos()'
pack-revindex: hide the definition of 'revindex_entry'
pack-revindex: remove unused 'find_revindex_position()'
pack-revindex: remove unused 'find_pack_revindex()'
builtin/gc.c: guess the size of the revindex
for_each_object_in_pack(): convert to new revindex API
unpack_entry(): convert to new revindex API
packed_object_info(): convert to new revindex API
retry_bad_packed_offset(): convert to new revindex API
get_delta_base_oid(): convert to new revindex API
rebuild_existing_bitmaps(): convert to new revindex API
try_partial_reuse(): convert to new revindex API
get_size_by_pos(): convert to new revindex API
show_objects_for_type(): convert to new revindex API
bitmap_position_packfile(): convert to new revindex API
check_object(): convert to new revindex API
write_reused_pack_verbatim(): convert to new revindex API
write_reused_pack_one(): convert to new revindex API
write_reuse_object(): convert to new revindex API
...
|
|
A bit of code refactoring.
* cc/write-promisor-file:
pack-write: die on error in write_promisor_file()
fetch-pack: refactor writing promisor file
fetch-pack: rename helper to create_promisor_file()
|
|
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
|
|
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
|
|
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
|
|
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
|
|
Code clean-up.
* ma/more-opaque-lock-file:
read-cache: try not to peek into `struct {lock_,temp}file`
refs/files-backend: don't peek into `struct lock_file`
midx: don't peek into `struct lock_file`
commit-graph: don't peek into `struct lock_file`
builtin/gc: don't peek into `struct lock_file`
|
|
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
|
|
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
|
|
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
|
|
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
|
|
Clean up option descriptions in "git cmd --help".
* zh/arg-help-format:
builtin/*: update usage format
parse-options: format argh like error messages
|
|
Diagnose command line error of "git rebase" early.
* rs/rebase-commit-validation:
rebase: verify commit parameter
|
|
Retire more names with "sha1" in it.
* ma/sha1-is-a-hash:
hash-lookup: rename from sha1-lookup
sha1-lookup: rename `sha1_pos()` as `hash_pos()`
object-file.c: rename from sha1-file.c
object-name.c: rename from sha1-name.c
|
|
"git rev-parse" can be explicitly told to give output as absolute
or relative path with the `--path-format=(absolute|relative)` option.
* bc/rev-parse-path-format:
rev-parse: add option for absolute or relative path formatting
abspath: add a function to resolve paths with missing components
|
|
'estimate_repack_memory()' takes into account the amount of memory
required to load the reverse index in memory by multiplying the assumed
number of objects by the size of the 'revindex_entry' struct.
Prepare for hiding the definition of 'struct revindex_entry' by removing
a 'sizeof()' of that type from outside of pack-revindex.c. Instead,
guess that one off_t and one uint32_t are required per object. Strictly
speaking, this is a worse guess than asking for 'sizeof(struct
revindex_entry)' directly, since the true size of this struct is 16
bytes with padding on the end of the struct in order to align the offset
field.
But, this is an approximation anyway, and it does remove a use of the
'struct revindex_entry' from outside of pack-revindex internals.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace direct accesses to the revindex with calls to
'offset_to_pack_pos()' and 'pack_pos_to_index()'.
Since this caller already had some error checking (it can jump to the
'give_up' label if it encounters an error), we can easily check whether
or not the provided offset points to an object in the given pack. This
error checking existed prior to this patch, too, since the caller checks
whether the return value from 'find_pack_revindex()' was NULL or not.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a direct access to the revindex array with
'pack_pos_to_offset()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace direct revindex accesses with calls to 'pack_pos_to_offset()'
and 'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
First replace 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()'. This prevents any bogus OFS_DELTA that may make
its way through until 'write_reuse_object()' from causing a bad memory
read (if 'revidx' is 'NULL')
Next, replace a direct access of '->nr' with the wrapper function
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for the magical "repo-abbrev" comment in .mailmap
files. This was added to .mailmap parsing in [1], as a generalized
feature of the git-shortlog Perl script added earlier in [2].
There was no documentation or tests for this feature, and I don't
think it's used in practice anymore.
What it did was to allow you to specify a single string to be
search-replaced with "/.../" in the .mailmap file. E.g. for
linux.git's current .mailmap:
git archive --remote=git@gitlab.com:linux-kernel/linux.git \
HEAD -- .mailmap | grep -a repo-abbrev
# repo-abbrev: /pub/scm/linux/kernel/git/
Then when running e.g.:
git shortlog --merges --author=Linus -1 v5.10-rc7..v5.10 | grep Merge
We'd emit (the [...] is mine):
Merge tag [...]git://git.kernel.org/.../tip/tip
But will now emit:
Merge tag [...]git.kernel.org/pub/scm/linux/kernel/git/tip/tip
I think at this point this is just a historical artifact we can get
rid of. It was initially meant for Linus's own use when we integrated
the Perl script[2], but since then it seems he's stopped using it.
Digging through Linus's release announcements on the LKML[3] the last
release I can find that made use of this output is Linux 2.6.25-rc6
back in March 2008[4]. Later on Linus started using --no-merges[5],
and nowadays seems to prefer some custom not-quite-shortlog format of
merges from lieutenants[6].
You will still see it on linux.git if you run "git shortlog" manually
yourself with --merges, with this removed you can still get the same
output with:
git log --pretty=fuller v5.10-rc7..v5.10 |
sed 's!/pub/scm/linux/kernel/git/!/.../!g' |
git shortlog
Arguably we should do the same for the search-replacing of "[PATCH]"
at the beginning with "". That seems to be another relic of a bygone
era when linux.git patches would have their E-Mail subject lines
applied as-is by "git am" or whatever. But we documented that feature
in "git-shortlog(1)", and it seems more widely applicable than
something purely kernel-specific.
1. 7595e2ee6ef (git-shortlog: make common repository prefix
configurable with .mailmap, 2006-11-25)
2. fa375c7f1b6 (Add git-shortlog perl script, 2005-06-04)
3. https://lore.kernel.org/lkml/
4. https://lore.kernel.org/lkml/alpine.LFD.1.00.0803161651350.3020@woody.linux-foundation.org/
5. https://lore.kernel.org/lkml/BANLkTinrbh7Xi27an3uY7pDWrNKhJRYmEA@mail.gmail.com/
6. https://lore.kernel.org/lkml/CAHk-=wg1+kf1AVzXA-RQX0zjM6t9J2Kay9xyuNqcFHWV-y5ZYw@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When executing a fetch, then git will currently allocate one reference
transaction per reference update and directly commit it. This means that
fetches are non-atomic: even if some of the reference updates fail,
others may still succeed and modify local references.
This is fine in many scenarios, but this strategy has its downsides.
- The view of remote references may be inconsistent and may show a
bastardized state of the remote repository.
- Batching together updates may improve performance in certain
scenarios. While the impact probably isn't as pronounced with loose
references, the upcoming reftable backend may benefit as it needs to
write less files in case the update is batched.
- The reference-update hook is currently being executed twice per
updated reference. While this doesn't matter when there is no such
hook, we have seen severe performance regressions when doing a
git-fetch(1) with reference-transaction hook when the remote
repository has hundreds of thousands of references.
Similar to `git push --atomic`, this commit thus introduces atomic
fetches. Instead of allocating one reference transaction per updated
reference, it causes us to only allocate a single transaction and commit
it as soon as all updates were received. If locking of any reference
fails, then we abort the complete transaction and don't update any
reference, which gives us an all-or-nothing fetch.
Note that this may not completely fix the first of above downsides, as
the consistent view also depends on the server-side. If the server
doesn't have a consistent view of its own references during the
reference negotiation phase, then the client would get the same
inconsistent view the server has. This is a separate problem though and,
if it actually exists, can be fixed at a later point.
This commit also changes the way we write FETCH_HEAD in case `--atomic`
is passed. Instead of writing changes as we go, we need to accumulate
all changes first and only commit them at the end when we know that all
reference updates succeeded. Ideally, we'd just do so via a temporary
file so that we don't need to carry all updates in-memory. This isn't
trivially doable though considering the `--append` mode, where we do not
truncate the file but simply append to it. And given that we support
concurrent processes appending to FETCH_HEAD at the same time without
any loss of data, seeding the temporary file with current contents of
FETCH_HEAD initially and then doing a rename wouldn't work either. So
this commit implements the simple strategy of buffering all changes and
appending them to the file on commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The handling of ref updates is completely handled by `s_update_ref()`,
which will manage the complete lifecycle of the reference transaction.
This is fine right now given that git-fetch(1) does not support atomic
fetches, so each reference gets its own transaction. It is quite
inflexible though, as `s_update_ref()` only knows about a single
reference update at a time, so it doesn't allow us to alter the
strategy.
This commit prepares `s_update_ref()` and its only caller
`update_local_ref()` to allow passing an external transaction. If none
is given, then the existing behaviour is triggered which creates a new
transaction and directly commits it. Otherwise, if the caller provides a
transaction, then we only queue the update but don't commit it. This
optionally allows the caller to manage when a transaction will be
committed.
Given that `update_local_ref()` is always called with a `NULL`
transaction for now, no change in behaviour is expected from this
change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cleanup code in `s_update_ref()` is currently duplicated for both
succesful and erroneous exit paths. This commit refactors the function
to have a shared exit path for both cases to remove the duplication.
Suggested-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit refactors `append_fetch_head()` to use a `struct strbuf` for
formatting the update which we're about to append to the FETCH_HEAD
file. While the refactoring doesn't have much of a benefit right now, it
serves as a preparatory step to implement atomic fetches where we need
to buffer all updates to FETCH_HEAD and only flush them out if all
reference updates succeeded.
No change in behaviour is expected from this commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing a fetch with the default `--write-fetch-head` option, we
write all updated references to FETCH_HEAD while the updates are
performed. Given that updates are not performed atomically, it means
that we we write to FETCH_HEAD even if some or all of the reference
updates fail.
Given that we simply update FETCH_HEAD ad-hoc with each reference, the
logic is completely contained in `store_update_refs` and thus quite hard
to extend. This can already be seen by the way we skip writing to the
FETCH_HEAD: instead of having a conditional which simply skips writing,
we instead open "/dev/null" and needlessly write all updates there.
We are about to extend git-fetch(1) to accept an `--atomic` flag which
will make the fetch an all-or-nothing operation with regards to the
reference updates. This will also require us to make the updates to
FETCH_HEAD an all-or-nothing operation, but as explained doing so is not
easy with the current layout. This commit thus refactors the wa we write
to FETCH_HEAD and pulls out the logic to open, append to, commit and
close the file. While this may seem rather over-the top at first,
pulling out this logic will make it a lot easier to update the code in a
subsequent commit. It also allows us to easily skip writing completely
in case `--no-write-fetch-head` was passed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git for-each-repo --config=X' should return success without calling any
subcommands when the config key 'X' has no value. The current
implementation instead segfaults.
A user could run into this issue if they used 'git maintenance start' to
initialize their cron schedule using 'git for-each-repo
--config=maintenance.repo ...' but then using 'git maintenance
unregister' to remove the config option. (Note: 'git maintenance stop'
would remove the config _and_ remove the cron schedule.)
Add a simple test to ensure this works. Use 'git help --no-such-option'
as the potential subcommand to ensure that we will hit a failure if the
subcommand is ever run.
Reported-by: Andreas Bühmann <dev@uuml.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e04 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288e (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569adb (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024af (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree repair" learned to deal with the case where both the
repository and the worktree moved.
* es/worktree-repair-both-moved:
worktree: teach `repair` to fix multi-directional breakage
|
|
When a user does not tell "git pull" to use rebase or merge, the
command gives a loud message telling a user to choose between
rebase or merge but creates a merge anyway, forcing users who would
want to rebase to redo the operation. Fix an early part of this
problem by tightening the condition to give the message---there is
no reason to stop or force the user to choose between rebase or
merge if the history fast-forwards.
* fc/pull-merge-rebase:
pull: display default warning only when non-ff
pull: correct condition to trigger non-ff advice
pull: get rid of unnecessary global variable
pull: give the advice for choosing rebase/merge much later
pull: refactor fast-forward check
|
|
Various improvements to the codepath that writes out pack bitmaps.
* tb/pack-bitmap: (24 commits)
pack-bitmap-write: better reuse bitmaps
pack-bitmap-write: relax unique revwalk condition
pack-bitmap-write: use existing bitmaps
pack-bitmap: factor out 'add_commit_to_bitmap()'
pack-bitmap: factor out 'bitmap_for_commit()'
pack-bitmap-write: ignore BITMAP_FLAG_REUSE
pack-bitmap-write: build fewer intermediate bitmaps
pack-bitmap.c: check reads more aggressively when loading
pack-bitmap-write: rename children to reverse_edges
t5310: add branch-based checks
commit: implement commit_list_contains()
bitmap: implement bitmap_is_subset()
pack-bitmap-write: fill bitmap with commit history
pack-bitmap-write: pass ownership of intermediate bitmaps
pack-bitmap-write: reimplement bitmap writing
ewah: add bitmap_dup() function
ewah: implement bitmap_or()
ewah: make bitmap growth less aggressive
ewah: factor out bitmap growth
rev-list: die when --test-bitmap detects a mismatch
...
|
|
There has never been a "git branch --local", this is just a typo for
"--list". Fixes a comment added in 23e714df91c (branch: roll
show_detached HEAD into regular ref_list, 2015-09-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A `struct lock_file` is pretty much just a wrapper around a tempfile.
But it's easy enough to avoid relying on this. Use the wrappers that the
lock file API provides rather than peeking at the temp file or even into
*its* internals.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark the errors mktag might emit for translation. This is a plumbing
command, but the errors it emits are intended to be human-readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the "mktag" command to use parse-options.h instead of its own
ad-hoc argc handling. This doesn't matter much in practice since it
doesn't support any options, but removes another special-case in our
codebase, and makes it easier to add options to it in the future.
It does marginally improve the situation for programs that want to
execute git commands in a consistent manner and e.g. always use
--end-of-options. E.g. "gitaly" does that, and has a blacklist of
built-ins that don't support --end-of-options. This is one less
special case for it and other similar programs to support.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the fsck_config() function from builtin/fsck.c to fsck.[ch]. This
allows for re-using it in other tools that expose fsck logic and want
to support its configuration variables.
A logical continuation of this change would be to use a common
function for all of {fetch,receive}.fsck.* and fsck.*. See
5d477a334a6 (fsck (receive-pack): allow demoting errors to warnings,
2015-06-22) and my own 1362df0d413 (fetch: implement fetch.fsck.*,
2018-07-27) for the relevant code.
However, those routines want to not parse the fsck.skipList into OIDs,
but rather pass them along with the --strict option to another
process. It would be possible to refactor that whole thing so we
support e.g. a "fetch." prefix, then just keep track of the skiplist
as a filename instead of parsing it, and learn to spew that all out
from our internal structures into something we can append to the
--strict option.
But instead I'm planning to re-use this in "mktag", which'll just
re-use these "fsck.*" variables as-is.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the validation logic in "mktag" to use fsck's fsck_tag()
instead of its own custom parser. Curiously the logic for both dates
back to the same commit[1]. Let's unify them so we're not maintaining
two sets functions to verify that a tag is OK.
The behavior of fsck_tag() and the old "mktag" code being removed here
is different in few aspects.
I think it makes sense to remove some of those checks, namely:
A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag
code disallowed values larger than 1400.
Yes there's currently no timezone with a greater offset[2], but
since we allow any number of non-offical timezones (e.g. +1234)
passing this through seems fine. Git also won't break in the
future if e.g. French Polynesia decides it needs to outdo the Line
Islands when it comes to timezone extravagance.
B. fsck allows missing author names such as "tagger <email>", mktag
wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but
not "tagger [1 space] <email>"). Now we allow all of these.
C. Like B, but "mktag" disallowed spaces in the <email> part, fsck
allows it.
In some ways fsck_tag() is stricter than "mktag" was, namely:
D. fsck disallows zero-padded dates, but mktag didn't care. So
e.g. the timestamp "0000000000 +0000" produces an error now. A
test in "t1006-cat-file.sh" relied on this, it's been changed to
use "hash-object" (without fsck) instead.
There was one check I deemed worth keeping by porting it over to
fsck_tag():
E. "mktag" did not allow any custom headers, and by extension (as an
empty commit is allowed) also forbade an extra stray trailing
newline after the headers it knew about.
Add a new check in the "ignore" category to fsck and use it. This
somewhat abuses the facility added in efaba7cc77f (fsck:
optionally ignore specific fsck issues completely, 2015-06-22).
This is somewhat of hack, but probably the least invasive change
we can make here. The fsck command will shuffle these categories
around, e.g. under --strict the "info" becomes a "warn" and "warn"
becomes "error". Existing users of fsck's (and others,
e.g. index-pack) --strict option rely on this.
So we need to put something into a category that'll be ignored by
all existing users of the API. Pretending that
fsck.extraHeaderEntry=error ("ignore" by default) was set serves
to do this for us.
1. ec4465adb38 (Add "tag" objects that can be used to sign other
objects., 2005-04-25)
2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces no functional change, but refactors the print-out of
the hash at the end to do the same thing with less code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This minor stylistic churn is usually something we'd avoid, but if we
don't do this then the file after changes in subsequent commits will
only have this minor style inconsistency, so let's change this while
we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the hardcoded hint of 2^12 to 0. The default strbuf hint is
perfectly fine here, and the only reason we were hardcoding it is
because it survived migration from a pre-strbuf fixed-sized buffer.
See fd17f5b5f77 (Replace all read_fd use with strbuf_read, and get rid
of it., 2007-09-10) for that migration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's background maintenance uses cron by default, but this is not
available on Windows. Instead, integrate with Task Scheduler.
Tasks can be scheduled using the 'schtasks' command. There are several
command-line options that can allow for some advanced scheduling, but
unfortunately these seem to all require authenticating using a password.
Instead, use the "/xml" option to pass an XML file that contains the
configuration for the necessary schedule. These XML files are based on
some that I exported after constructing a schedule in the Task Scheduler
GUI. These options only run background maintenance when the user is
logged in, and more fields are populated with the current username and
SID at run-time by 'schtasks'.
Since the GIT_TEST_MAINT_SCHEDULER environment variable allows us to
specify 'schtasks' as the scheduler, we can test the Windows-specific
logic on other platforms. Thus, add a check that the XML file written
by Git is valid when xmllint exists on the system.
Since we use a temporary file for the XML files sent to 'schtasks', we
prefix the random characters with the frequency so it is easier to
examine the proper file during tests. Instead of an exact match on the
'args' file, we 'grep' for the arguments other than the filename.
There is a deficiency in the current design. Windows has two kinds of
applications: GUI applications that start by "winmain()" and console
applications that start by "main()". Console applications are attached
to a new Console window if they are not already associated with a GUI
application. This means that every hour the scheudled task launches a
command window for the scheduled tasks. Not only is this visually
obtrusive, but it also takes focus from whatever else the user is
doing!
A simple fix would be to insert a GUI application that acts as a shim
between the scheduled task and Git. This is currently possible in Git
for Windows by setting the <Command> tag equal to
C:\Program Files\Git\git-bash.exe
|
Junio C Hamano
Taylor Blau
Christian Couder
Ævar Arnfjörð Bjarmason
Patrick Steinhardt
Derrick Stolee
ZheNing Hu
Martin Ågren