| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git clone --separate-git-dir=$over_there" is interrupted, it
failed to remove the real location of the $GIT_DIR it created. This
was most visible when interrupting a submodule update.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
|
|
"git merge --no-edit" computed who were involved in the work done
on the side branch, even though that information is to be discarded
without getting seen in the editor.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
|
|
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
|
|
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
|
|
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
|
|
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The credit lines "By" and "Via" to credit authors and committers for
their contributions on the side branch are meant as a hint to the
integrator to decide whom to mention in the log message text. After
the integrator saves the message in the editor, they are meant to go
away and that is why they are commented out.
When a merge is recorded without editing the generated message,
however, its contents do not go through the normal stripspace()
and these lines are left in the merge.
Stop producing them when we know the merge is going to be recorded
without editing, i.e. when --no-edit is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Currently it gets the size of an otherwise unrelated, unused variable
instead of the expected struct size.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent commit [1] fixed a off-by-one wrapping error. As a
side-effect, the conditional in add_wrapped_shortlog_msg() to decide
whether to append a newline needs to be removed. The function
should always append a newline, which was the case before the
off-by-one fix, because strbuf_add_wrapped_text() never returns a
value of wraplen; when it returns wraplen, the string does not end
with a newline, so this caller needs to add one anyway.
[1] 14e1a4e1ff70aff36db3f5d2a8b806efd0134d50 utf8: fix off-by-one
wrapping of text
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
|
|
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites
|
|
Finishing touches to "git rm $submodule" that removes the working
tree of a submodule.
* jl/submodule-rm:
Teach rm to remove submodules when given with a trailing '/'
|
|
* maint:
Fix typo in remote set-head usage
Makefile: hide stderr of curl-config test
|
|
parenthesis are not matching in `builtin_remote_sethead_usage`
as a square bracket is closing something never opened.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/checkout-out-of-unborn:
checkout: print a message when switching unborn branches
|
|
* cn/config-missing-path:
config: don't segfault when given --path with a missing value
|
|
Doing a "git rm submod/" on a submodule results in an error:
fatal: pathspec 'submod/' did not match any files
This is really inconvenient as e.g. using TAB completion in a shell on a
submodule automatically adds the trailing '/' when it completes the path
of the submodule directory. The user has then to remove the '/' herself to
make a "git rm" succeed. Doing a "git rm -r somedir/" is working fine, so
there is no reason why that shouldn't work for submodules too.
Teach git rm to not error out when a '/' is appended to the path of a
submodule. Achieve this by chopping off trailing slashes from the path
names given if they represent directories. Add tests to make sure that
logic only applies to directories and not to files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
|
|
* jk/checkout-out-of-unborn:
checkout: print a message when switching unborn branches
|
|
"git config --path $key" segfaulted on "[section] key" (a boolean
"true" spelled without "=", not "[section] key = true").
* cn/config-missing-path:
config: don't segfault when given --path with a missing value
|
|
Be more user friendly to people using "git replace -d".
* mg/replace-resolve-delete:
replace: parse revision argument for -d
|
|
Use preloadindex in more places, which has a nice speedup on systems
with slow stat calls (and even on Linux).
* kb/preload-index-more:
update-index/diff-index: use core.preloadindex to improve performance
|
|
A symbolic ref refs/heads/SYM was not correctly removed with "git
branch -d SYM"; the command removed the ref pointed by SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
|
|
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
|
|
When given a variable without a value, such as '[section] var' and
asking git-config to treat it as a path, git_config_pathname returns
an error and doesn't modify its output parameter. show_config assumes
that the call is always successful and sets a variable to indicate
that vptr should be freed. In case of an error however, trying to do
this will cause the program to be killed, as it's pointing to memory
in the stack.
Detect the error and return immediately to avoid freeing or accessing
the uninitialed memory in the stack.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We keep track of whether the user ident was given to us
explicitly, or if we guessed at it from system parameters
like username and hostname. However, we kept only a single
variable. This covers the common cases (because the author
and committer will usually come from the same explicit
source), but can miss two cases:
1. GIT_COMMITTER_* is set explicitly, but we fallback for
GIT_AUTHOR. We claim the ident is explicit, even though
the author is not.
2. GIT_AUTHOR_* is set and we ask for author ident, but
not committer ident. We will claim the ident is
implicit, even though it is explicit.
This patch uses two variables instead of one, updates both
when we set the "fallback" values, and updates them
individually when we read from the environment.
Rather than keep user_ident_sufficiently_given as a
compatibility wrapper, we update the only two callers to
check the committer_ident, which matches their intent and
what was happening already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we switch to a new branch using checkout, we usually output a
message indicating what happened. However, when we switch from an unborn
branch to a new branch, we do not print anything, which may leave the
user wondering what happened.
The reason is that the unborn branch is a special case (see abe1998),
and does not follow the usual switch_branches code path. Let's add a
similar informational message to the special case to match the usual
code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
|
|
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Conflicts:
builtin/mailinfo.c
|
|
Add "symbolic-ref -d SYM" to delete a symbolic ref SYM.
It is already possible to remove a symbolic ref with "update-ref -d
--no-deref", but it may be a good addition for completeness.
* jh/symbolic-ref-d:
git symbolic-ref --delete $symref
|
|
'git replace' parses the revision arguments when it creates replacements
(so that a sha1 can be abbreviated, e.g.) but not when deleting
replacements.
Make it parse the argument to 'replace -d' in the same way.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Code cleanups so that libgit.a does not depend on anything in the
builtin/ directory.
* nd/builtin-to-libgit:
fetch-pack: move core code to libgit.a
fetch-pack: remove global (static) configuration variable "args"
send-pack: move core code to libgit.a
Move setup_diff_pager to libgit.a
Move print_commit_list to libgit.a
Move estimate_bisect_steps to libgit.a
Move try_merge_command and checkout_fast_forward to libgit.a
|
|
Callers of reencode_string() that re-encodes a string from one
encoding to another all used ad-hoc way to bypass the case where the
input and the output encodings are the same. Some did strcmp(),
some did strcasecmp(), yet some others when converting to UTF-8 used
is_encoding_utf8().
Introduce same_encoding() helper function to make these callers use
the same logic. Notably, is_encoding_utf8() has a work-around for
common misconfiguration to use "utf8" to name UTF-8 encoding, which
does not match "UTF-8" hence strcasecmp() would not consider the
same. Make use of it in this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'update-index --refresh' and 'diff-index' (without --cached) don't honor
the core.preloadindex setting yet. Porcelain commands using these (such as
git [svn] rebase) suffer from this, especially on Windows.
Use read_cache_preload to improve performance.
Additionally, in builtin/diff.c, don't preload index status if we don't
access the working copy (--cached).
Results with msysgit on WebKit repo (2GB in 200k files):
| update-index | diff-index | rebase
----------------+--------------+------------+---------
msysgit-v1.8.0 | 9.157s | 10.536s | 42.791s
+ preloadindex | 9.157s | 10.536s | 28.725s
+ this patch | 2.329s | 2.752s | 15.152s
+ fscache [1] | 0.731s | 1.171s | 8.877s
[1] https://github.com/kblees/git/tree/kb/fscache-v3
Thanks-to: Albert Krawczyk <pro-logic@optusnet.com.au>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
A symbolic ref refs/heads/SYM was not correctly removed with
"git branch -d SYM"; the command removed the ref pointed by
SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
|
|
Allow an earlier "--short" option on the command line to be
countermanded with the "--long" option for "git status" and "git
commit".
* nd/status-long:
status: add --long output format option
|
|
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
|
|
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally. The early part of this series is a fix for it;
the latter part teaches log to respect the grep.* configuration.
* jc/grep-pcre-loose-ends:
log: honor grep.* configuration
log --grep: accept --basic-regexp and --perl-regexp
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
|
|
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
|
|
fetch_pack() is used by transport.c, part of libgit.a while it stays
in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This helps removes the hack in fetch_pack() that copies my_args to args.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This is used by diff-no-index.c, part of libgit.a while it stays in
builtin/diff.c. Move it to diff.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
While at it, move check_pager from git.c to pager.c. It makes more
sense there and pager.c is also part of libgit.a
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
This function is used by bisect.c, part of libgit.a while
estimate_bisect_steps stays in builtin/rev-list.c. Move it to bisect.a
so we won't have undefine reference if a standalone program that uses
libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Sparse issues an "Using plain integer as NULL pointer" warning while
checking a 'struct strbuf_list' initializer expression. The initial
field of the struct has pointer type, but the initializer expression
is given as '{0}'. In order to suppress the warning, we simply replace
the initializer with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Speeds up "git upload-pack" (what is invoked by "git fetch" on the
other side of the connection) by reducing the cost to advertise the
branches and tags that are available in the repository.
* jk/peel-ref:
upload-pack: use peel_ref for ref advertisements
peel_ref: check object type before loading
peel_ref: do not return a null sha1
peel_ref: use faster deref_tag_noverify
|
Junio C Hamano
Jens Lehmann
Antoine Pelisse
Matthew Daley
Steffen Prohaska
Carlos Martín Nieto
Jeff King
Michael J Gruber
Karsten Blees
Nguyễn Thái Ngọc Duy
Ramsay Jones