| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
|
|
Commit e8cbe2118a (am: stop exporting GIT_COMMITTER_DATE, 2020-08-17)
rewrote the code for setting the committer date to use fmt_ident(),
rather than setting an environment variable and letting commit_tree()
handle it. But it introduced two bugs:
- we use the author email string instead of the committer email
- when parsing the committer ident, we used the wrong variable to
compute the length of the email, resulting in it always being a
zero-length string
This commit fixes both, which causes our test of this option via the
rebase "apply" backend to now succeed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fixes.
* ja/misc-doc-fixes:
doc: fix the bnf like style of some commands
doc: git-remote fix ups
doc: use linkgit macro where needed.
git-bisect-lk2009: make continuation of list indented
|
|
Hotfix and clean-up for the jt/threaded-index-pack topic that has
graduated to v2.29-rc0.
* jk/index-pack-hotfixes:
index-pack: make get_base_data() comment clearer
index-pack: drop type_cas mutex
index-pack: restore "resolving deltas" progress meter
|
|
In command line options, variables are entered between < and >
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A comment mentions that we may free cached delta bases via
find_unresolved_deltas(), but that function went away in f08cbf60fe
(index-pack: make quantum of work smaller, 2020-09-08). Since we need to
rewrite that comment anyway, make the entire comment clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The type_cas lock lost all of its callers in f08cbf60fe (index-pack:
make quantum of work smaller, 2020-09-08), so we can safely delete it.
The compiler didn't alert us that the variable became unused, because we
still call pthread_mutex_init() and pthread_mutex_destroy() on it.
It's worth considering also whether that commit was in error to remove
the use of the lock. Why don't we need it now, if we did before, as
described in ab791dd138 (index-pack: fix race condition with duplicate
bases, 2014-08-29)? I think the answer is that we now look at and assign
the child_obj->real_type field in the main thread while holding the
work_lock(). So we don't have to worry about racing with the worker
threads.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit f08cbf60fe (index-pack: make quantum of work smaller, 2020-09-08)
refactored the main loop in threaded_second_pass(), but also deleted the
call to display_progress() at the top of the loop. This means that users
typically see no progress at all during the delta resolution phase (and
for large repositories, Git appears to hang).
This looks like an accident that was unrelated to the intended change of
that commit, since we continue to update nr_resolved_deltas in
resolve_delta(). Let's restore the call to get that progress back.
We'll also add a test that confirms we generate the expected progress.
This isn't perfect, as it wouldn't catch a bug where progress was
delayed to the end. That was probably possible to trigger when receiving
a thin pack, because we'd eventually call display_progress() from
fix_unresolved_deltas(), but only once after doing all the work.
However, since our test case generates a complete pack, it reliably
demonstrates this particular bug and its fix. And we can't do better
without making the test racy.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learns to take "whenAble" as a possible value
for the format.useAutoBase configuration variable to become no-op
when the automatically computed base does not make sense.
* jk/format-auto-base-when-able:
format-patch: teach format.useAutoBase "whenAble" option
|
|
"git fetch" and "git push" support negative refspecs.
* jk/refspecs-negative:
refspec: add support for negative refspecs
|
|
The lazy fetching done internally to make missing objects available
in a partial clone incorrectly made permanent damage to the partial
clone filter in the repository, which has been corrected.
* jt/keep-partial-clone-filter-upon-lazy-fetch:
fetch: do not override partial clone filter
promisor-remote: remove unused variable
|
|
Code cleanup.
* jk/unused:
dir.c: drop unused "untracked" from treat_path_fast()
sequencer: handle ignore_footer when parsing trailers
test-advise: check argument count with argc instead of argv
sparse-checkout: fill in some options boilerplate
sequencer: drop repository argument from run_git_commit()
push: drop unused repo argument to do_push()
assert PARSE_OPT_NONEG in parse-options callbacks
env--helper: write to opt->value in parseopt helper
drop unused argc parameters
convert: drop unused crlf_action from check_global_conv_flags_eol()
|
|
Code simplification.
* so/combine-diff-simplify:
diff: get rid of redundant 'dense' argument
|
|
Update the tests to drop word 'master' from them.
* js/default-branch-name-part-2:
t9902: avoid using the branch name `master`
tests: avoid variations of the `master` branch name
t3200: avoid variations of the `master` branch name
fast-export: avoid using unnecessary language in a code comment
t/test-terminal: avoid non-inclusive language
|
|
"git shortlog" has been taught to group commits by the contents of
the trailer lines, like "Reviewed-by:", "Coauthored-by:", etc.
* jk/shortlog-group-by-trailer:
shortlog: allow multiple groups to be specified
shortlog: parse trailer idents
shortlog: rename parse_stdin_ident()
shortlog: de-duplicate trailer values
shortlog: match commit trailers with --group
trailer: add interface for iterating over commit trailers
shortlog: add grouping option
shortlog: change "author" variables to "ident"
|
|
Rewrite of the "git bisect" script in C continues.
* mr/bisect-in-c-2:
bisect--helper: reimplement `bisect_next` and `bisect_auto_next` shell functions in C
bisect: call 'clear_commit_marks_all()' in 'bisect_next_all()'
bisect--helper: reimplement `bisect_autostart` shell function in C
bisect--helper: introduce new `write_in_file()` function
bisect--helper: use '-res' in 'cmd_bisect__helper' return
bisect--helper: BUG() in cmd_*() on invalid subcommand
|
|
"git bisect start X Y", when X and Y are not valid committish
object names, should take X and Y as pathspec, but didn't.
* cc/bisect-start-fix:
bisect: don't use invalid oid as rev when starting
|
|
"git blame --ignore-rev/--ignore-revs-file" failed to validate
their input are valid revision, and failed to take into account
that the user may want to give an annotated tag instead of a
commit, which has been corrected.
* jc/blame-ignore-fix:
blame: validate and peel the object names on the ignore list
t8013: minimum preparatory clean-up
|
|
Compilation fix around type punning.
* jk/drop-unaligned-loads:
Revert "fast-export: use local array to store anonymized oid"
bswap.h: drop unaligned loads
|
|
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both fetch and push support pattern refspecs which allow fetching or
pushing references that match a specific pattern. Because these patterns
are globs, they have somewhat limited ability to express more complex
situations.
For example, suppose you wish to fetch all branches from a remote except
for a specific one. To allow this, you must setup a set of refspecs
which match only the branches you want. Because refspecs are either
explicit name matches, or simple globs, many patterns cannot be
expressed.
Add support for a new type of refspec, referred to as "negative"
refspecs. These are prefixed with a '^' and mean "exclude any ref
matching this refspec". They can only have one "side" which always
refers to the source. During a fetch, this refers to the name of the ref
on the remote. During a push, this refers to the name of the ref on the
local side.
With negative refspecs, users can express more complex patterns. For
example:
git fetch origin refs/heads/*:refs/remotes/origin/* ^refs/heads/dontwant
will fetch all branches on origin into remotes/origin, but will exclude
fetching the branch named dontwant.
Refspecs today are commutative, meaning that order doesn't expressly
matter. Rather than forcing an implied order, negative refspecs will
always be applied last. That is, in order to match, a ref must match at
least one positive refspec, and match none of the negative refspecs.
This is similar to how negative pathspecs work.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout passes along argv and argc to its sub-command helper
functions. Many of these sub-commands do not yet take any command-line
options, and ignore those parameters.
Let's instead add empty option lists and make sure we call
parse_options(). That will give a useful error message for something
like:
git sparse-checkout list --nonsense
which currently just silently ignores the unknown option.
As a bonus, it also silences some -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We stopped using the "repo" argument in 8e4c8af058 (push: disallow --all
and refspecs when remote.<name>.mirror is set, 2019-09-02), which moved
the pushremote handling to its caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of 517fe807d6 (assert NOARG/NONEG behavior of
parse-options callbacks, 2018-11-05), let's cover some parse-options
callbacks which expect to be used with PARSE_OPT_NONEG but don't
explicitly assert that this is the case. These callbacks are all used
correctly in the current code, but this will help document their
expectations and future-proof the code.
As a bonus, it also silences -Wunused-parameters (these were added since
the initial sweep of 517fe807d6, and we can't yet turn on
-Wunused-parameters to remind people because it has too many existing
false positives).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use OPT_CALLBACK_F() to call the option_parse_type() callback,
passing it the address of "cmdmode" as the value to write to. But the
callback doesn't look at opt->value at all, and instead writes to a
global variable.
This works out because that's the same global variable we happen to pass
in, but it's rather confusing. Let's use the passed-in value instead.
We'll also make "cmdmode" a local variable of the main function,
ensuring we can't make the same mistake again.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many functions take an argv/argc pair, but never actually look at argc.
This makes it useless at best (we use the NULL sentinel in argv to find
the end of the array), and misleading at worst (what happens if the argc
count does not match the argv NULL?).
In each of these instances, the argv NULL does match the argc count, so
there are no bugs here. But let's tighten the interfaces to make it
harder to get wrong (and to reduce some -Wunused-parameter complaints).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier we taught "git pull" to warn when the user does not say the
histories need to be merged, rebased or accepts only fast-
forwarding, but the warning triggered for those who have set the
pull.ff configuration variable.
* ah/pull:
pull: don't warn if pull.ff has been set
|
|
"git clone" that clones from SHA-1 repository, while
GIT_DEFAULT_HASH set to use SHA-256 already, resulted in an
unusable repository that half-claims to be SHA-256 repository
with SHA-1 objects and refs. This has been corrected.
* bc/clone-with-git-default-hash-fix:
builtin/clone: avoid failure with GIT_DEFAULT_HASH
|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
Get rid of 'dense' argument that is redundant for every function that has
'struct rev_info *rev' argument as well, as the value of 'dense' passed is
always taken from 'rev->dense_combined_merges' field.
The only place where this was not the case is in 'submodule.c' where
'diff_tree_combined_merge()' was called with '1' for 'dense' argument. However,
at that call the 'revs' instance used is local to the function, and we now just
set 'revs->dense_combined_merges' to 1 in this local instance.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a fetch with the --filter argument is made, the configured default
filter is set even if one already exists. This change was made in
5e46139376 ("builtin/fetch: remove unique promisor remote limitation",
2019-06-25) - in particular, changing from:
* If this is the FIRST partial-fetch request, we enable partial
* on this repo and remember the given filter-spec as the default
* for subsequent fetches to this remote.
to:
* If this is a partial-fetch request, we enable partial on
* this repo if not already enabled and remember the given
* filter-spec as the default for subsequent fetches to this
* remote.
(The given filter-spec is "remembered" even if there is already an
existing one.)
This is problematic whenever a lazy fetch is made, because lazy fetches
are made using "git fetch --filter=blob:none", but this will also happen
if the user invokes "git fetch --filter=<filter>" manually. Therefore,
restore the behavior prior to 5e46139376, which writes a filter-spec
only if the current fetch request is the first partial-fetch one (for
that remote).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that shortlog supports reading from trailers, it can be useful to
combine counts from multiple trailers, or between trailers and authors.
This can be done manually by post-processing the output from multiple
runs, but it's non-trivial to make sure that each name/commit pair is
counted only once.
This patch teaches shortlog to accept multiple --group options on the
command line, and pull data from all of them. That makes it possible to
run:
git shortlog -ns --group=author --group=trailer:co-authored-by
to get a shortlog that counts authors and co-authors equally.
The implementation is mostly straightforward. The "group" enum becomes a
bitfield, and the trailer key becomes a list. I didn't bother
implementing the multi-group semantics for reading from stdin. It would
be possible to do, but the existing matching code makes it awkward, and
I doubt anybody cares.
The duplicate suppression we used for trailers now covers authors and
committers as well (though in non-trailer single-group mode we can skip
the hash insertion and lookup, since we only see one value per commit).
There is one subtlety: we now care about the case when no group bit is
set (in which case we default to showing the author). The caller in
builtin/log.c needs to be adapted to ask explicitly for authors, rather
than relying on shortlog_init(). It would be possible with some
gymnastics to make this keep working as-is, but it's not worth it for a
single caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trailers don't necessarily contain name/email identity values, so
shortlog has so far treated them as opaque strings. However, since many
trailers do contain identities, it's useful to treat them as such when
they can be parsed. That lets "-e" work as usual, as well as mailmap.
When they can't be parsed, we'll continue with the old behavior of
treating them as a single string (there's no new test for that here,
since the existing tests cover a trailer like this).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is actually useful for parsing any identity, whether from
stdin or not. We'll need it for handling trailers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation is vague about what happens with
--group=trailer:signed-off-by when we see a commit with:
Signed-off-by: One
Signed-off-by: Two
Signed-off-by: One
We clearly should credit both "One" and "Two", but should "One" get
credited twice? The current code does so, but mostly because that was
the easiest thing to do. It's probably more useful to count each commit
at most once. This will become especially important when we allow
values from multiple sources in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a project uses commit trailers, this patch lets you use
shortlog to see who is performing each action. For example,
running:
git shortlog -ns --group=trailer:reviewed-by
in git.git shows who has reviewed. You can even use a custom
format to see things like who has helped whom:
git shortlog --format="...helped %an (%ad)" \
--group=trailer:helped-by
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for adding more grouping types, let's refactor the
committer/author grouping code and add a user-facing option that binds
them together. In particular:
- the main option is now "--group", to make it clear
that the various group types are mutually exclusive. The
"--committer" option is an alias for "--group=committer".
- we keep an enum rather than a binary flag, to prepare
for more values
- we prefer switch statements to ternary assignment, since
other group types will need more custom code
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
We already match "committer", and we're about to start
matching more things. Let's use a more neutral variable to
avoid confusion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 06f5608c14 (bisect--helper: `bisect_start` shell function
partially in C, 2019-01-02), we changed the following shell
code:
- rev=$(git rev-parse -q --verify "$arg^{commit}") || {
- test $has_double_dash -eq 1 &&
- die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
- break
- }
- revs="$revs $rev"
into:
+ char *commit_id = xstrfmt("%s^{commit}", arg);
+ if (get_oid(commit_id, &oid) && has_double_dash)
+ die(_("'%s' does not appear to be a valid "
+ "revision"), arg);
+
+ string_list_append(&revs, oid_to_hex(&oid));
+ free(commit_id);
In case of an invalid "arg" when "has_double_dash" is false, the old
code would "break" out of the argument loop.
In the new C code though, `oid_to_hex(&oid)` is unconditonally
appended to "revs". This is wrong first because "oid" is junk as
`get_oid(commit_id, &oid)` failed and second because it doesn't break
out of the argument loop.
Not breaking out of the argument loop means that "arg" is then not
treated as a path restriction (which is wrong).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user who understands enough to set pull.ff does not need additional
instructions.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command reads list of object names to place on the ignore list
either from the command line or from a file, but they are not
checked with their object type (those read from the file are not
even checked for object existence).
Extend the oidset_parse_file() API and allow it to take a callback
that can be used to die (e.g. when an inappropriate input is read)
or modify the object name read (e.g. when a tag pointing at a commit
is read, and the caller wants a commit object name), and use it in
the code that handles ignore list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f39ad38410da554af54966bf74fa0402355852ac.
That commit was trying to silence a type-punning warning on older
versions of gcc. However, its analysis was all wrong. I didn't notice
that we _were_ in fact type-punning because there are two versions of
put_be32(): one that uses casts and unaligned loads, and another that
uses bitshifts. I looked at the latter, but on my platform we were
defaulting to the former.
However, as of the previous commit, we'll always use the bitshift
version. So we can drop this hackery to avoid the warning, making the
code slightly cleaner.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
functions in C
Reimplement the `bisect_next()` and the `bisect_auto_next()` shell functions
in C and add the subcommands to `git bisect--helper` to call them from
git-bisect.sh .
bisect_auto_next() function returns an enum bisect_error type as whole
`git bisect` can exit with an error code when bisect_next() does.
Return an error when `bisect_next()` fails, that fix a bug on shell script
version.
Using `--bisect-next` and `--bisect-auto-next` subcommands is a
temporary measure to port shell function to C so as to use the existing
test suite. As more functions are ported, `--bisect-auto-next`
subcommand will be retired and will be called by some other methods.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_autostart()` shell function in C and add the
C implementation from `bisect_next()` which was previously left
uncovered.
Add `--bisect-autostart` subcommand to be called from git-bisect.sh.
Using `--bisect-autostart` subcommand is a temporary measure to port
the shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and
bisect_autostart() will be called directly by `bisect_state()`.
Change behavior of shell script that returned success when user aborted
the bisection.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch --all --ipv4/--ipv6" forgot to pass the protocol options
to instances of the "git fetch" that talk to individual remotes,
which has been corrected.
* ar/fetch-ipversion-in-all:
fetch: pass --ipv4 and --ipv6 options to sub-fetches
|
Jeff King
Junio C Hamano
Jean-Noël Avila
Jonathan Tan
Jacob Keller
Sergey Organov
Christian Couder
Alex Henrie
Pranit Bauva